Aerosense Series ASG Differential Pressure Gauge Wholesaler

Aerosense Model ASGC-02 INCH Differential Pressure Gauge Range 1-0-1 Inch

Usage/ApplicationBlower Vacuum Monitoring
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-04 INCH Differential Pressure Gauge Range 2-0-2 Inch

Model NumberASGC-04
Usage/ApplicationFilter monitoring
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10 INCH Differential Pressure Gauge Range 5-0-5 INCH

BrandAerosense
Model Name/NumberASGC-10 inch
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

 

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20 INCH Differential Pressure Gauge Range 10-0-10 Inch

BrandAerosense
Model Name/NumberASGC-20 inch
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30 INCH Differential Pressure Gauge Range 15-0-15 Inch

BrandAerosense
Model Name/NumberASGC-30 inch
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

 

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-15CM Differential Pressure Gauge Range 0-15 CM of Water

BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-20CM Differential Pressure Gauge Range 0-20 CM of Water

Model NumberASG-20CM
Usage/ApplicationFilter monitoring
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

BrandAerosense
Measuring Range0-25 CM of Water
Model Name/NumberASG-25CM
Usage/ApplicationIndustrial
MaterialMild Steel
ConnectionNew
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Process Connections1/8″ female NPT
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits20 to 140degF
Over Pressure25 psig


Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

 

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-50CM Differential Pressure Gauge Range 0-50 CM of Water

BrandAerosense
Model Name/NumberASG-50CM
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-80CM Differential Pressure Gauge Range 0-80 CM of Water

BrandAerosense
Model Name/NumberASG-80CM
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Process Connections1/8″ female NPT
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits20 to 140degF
Over Pressure25 psig


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100CM Differential Pressure Gauge Range 0-100 CM of Water

BrandAerosense
Model Name/NumberASG-100CM
Accuracy+-2% of full scale
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-150CM Differential Pressure Gauge Range 0-150 CM of Water

BrandAerosense
Model Name/NumberASG-150CM
Accuracy+-2% of full scale
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

 

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

Specifications:
  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.
 

Aerosense Model ASG-200CM Differential Pressure Gauge Range 0-200 CM of Water

Model NumberASG-200CM
Usage/ApplicationDuct,Room or Building Pressures
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250CM Differential Pressure Gauge Range 0-250 CM of Water

Model NumberASG-250CM
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Process Connections1/8″ female NPT
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-300CM Differential Pressure Gauge Range 0-300 CM of Water

Model NumberASG-300CM
Usage/ApplicationBlower Vacuum Monitoring
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-6MM Differential Pressure Gauge Range 3 -0-3 mm

 

Model NumberASGC-6MM
Usage/ApplicationFan Pressure Indication
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specification:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10MM Differential Pressure Gauge Range 5 -0-5 mm

Model NumberASGC-10MM
Usage/ApplicationFilter monitoring
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Process Connections1/8″ female NPT
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

Specifications:
  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.
 

Aerosense Model ASGC-20MM Differential Pressure Gauge Range 10 -0-10 mm

Model NumberASGC-20MM
Usage/ApplicationDuct, Room or Building Pressures
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

 

BrandAerosense
Measuring Range0.125-0-0.125 Inch
Model Name/NumberASGC-00 inch
Usage/ApplicationIndustrial
MaterialMild Steel
ConnectionNew
Accuracy+-2% of full scale
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF


Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differe

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60”C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-01 INCH Differential Pressure Gauge Range 0.5-0-0.5 INCH

 

BrandAerosense
Model Name/NumberASGC-01inch
Accuracy+-2% of full scale
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-0 INCH Differential Pressure Gauge Range 0.25-0-0.25 Inch

 

BrandAerosense
Model Name/NumberASGC-0 inch
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Process Connections1/8″ female NPT
Mounting OrientationDiaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits20 to 140degF


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

 

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Model NumberASGC-1KPA
Usage/ApplicationFilter monitoring
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2KPA Differential Pressure Gauge Range 1-0-1 KPA

 

Model NumberASGC-2KPA
Usage/ApplicationBlower Vacuum Monitoring
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig

 

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2.5KPA Differential Pressure Gauge Range 1.25-0-1.25 KPA

 
Model NumberASGC-2.5KPA
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specification:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

 

Aerosense Model ASGC-3KPA Differential Pressure Gauge Range 1.5-0-1.5 KPA

 

Model NumberASGC-3KPA
Usage/ApplicationFilter monitoring
BrandAerosense
Weight510 g
Size4″ (101.6 mm) diameter dial face
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-4CM Differential Pressure Gauge Range 2-0-2 CM

 

Model NumberASGC-4CM
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specification:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10CM Differential Pressure Gauge Range 5-0-5 CM

 

Model NumberASGC-10CM
Usage/ApplicationBlower Vacuum Monitoring
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30CM Differential Pressure Gauge Range 15-0-15 CM

 
Model NumberASGC-30CM
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60NPA Differential Pressure Gauge Range 10-0-50 PA

 
Model NumberASG-60NPA
Usage/ApplicationDuct,Room or Building Pressures
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60PA Differential Pressure Gauge Range 0-60 PA

 
Model NumberASG-60PA
Usage/ApplicationFan Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100PA Differential Pressure Gauge Range 0-100 PA

 
Model NumberASG-100PA
Usage/ApplicationDuct, Room or Building Pressures
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-125PA Differential Pressure Gauge Range 0-125 PA

 
Model NumberASG-125PA
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250PA Differential Pressure Gauge Range 0-250 PA

 
Model NumberASG-250PA
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-500PA Differential Pressure Gauge Range 0-500 PA

 
Model NumberASG-500PA
Usage/ApplicationFan Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-750PA Differential Pressure Gauge Range 0-750 PA

 
Model NumberSeries ASG
Usage/ApplicationFan Pressure Indication
BrandAerosense
Accuracy+-2%
Temperature20 to 140 degF
Size4″
Housing MaterialDie cast aluminium
Pressure Limits20 in hg
Over Pressure25 psig


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-1000PA Differential Pressure Gauge Range 0-1000 PA

 
Model NumberASG-1000PA
Usage/ApplicationDuct,Room or Building Pressures
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-60PA Differential Pressure Gauge Range 30-0-30 PA

 
Model NumberASGC-60PA
Usage/ApplicationFan Pressure Indication
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
BrandAerosense
Housing MaterialDie cast aluminum case
Process Connections1/8″ female NPT
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg

 

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-100PA Differential Pressure Gauge Range 50-0-50 PA

 
Model NumberASGC-100PA
Usage/ApplicationFan Pressure Indication
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
BrandAerosense
Housing MaterialDie cast aluminum case
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg

 

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-200PA Differential Pressure Gauge Range 100-0-100 PA

 
Model NumberASGC-200PA
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Housing MaterialDie cast aluminum case
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-120PA Differential Pressure Gauge Range 60-0-60 PA

 
Model NumberASGC-120PA
Usage/ApplicationFan Pressure Indication
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-250PA Differential Pressure Gauge Range 125-0-125 PA

 
Model NumberASGC-250PA
Usage/ApplicationDuct, Room or Building Pressures
BrandAerosense
Accuracy+-2% of full scale
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm)
Pressure Limits-20 in Hg
Over Pressure25 psig
Temperature Limits20 to 140degF
Process Connections1/8″ female NPT


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specification:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-300PA Differential Pressure Gauge Range 150-0-150 PA

 
Model NumberASGC-300PA
Usage/ApplicationDuct, Room or Building Pressures
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Temperature Limits20 to 140degF
Pressure Limits-20 in Hg
Over Pressure25 psig
Process Connections1/8″


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-500PA Differential Pressure Gauge Range 250-0-250 PA

 
Model NumberASGC-500PA
Usage/ApplicationClean Room Positive Pressure Indication
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1000PA Differential Pressure Gauge Range 500-0-500 PA

 
Model NumberASGC-1000PA
Usage/ApplicationDuct,Room or Building Pressures
BrandAerosense
Weight1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size4″ (101.6 mm) diameter dial face.
Process Connections1/8″
Temperature Limits20 to 140degF
Over Pressure25 psig
Pressure Limits-20 in Hg


Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

  • Filter monitoring
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication


Specifications:

  • Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
  • Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
  • Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
  • Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
  • Size: 4″ (101.6 mm) diameter dial face.
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
  • Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
  • Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Leave a Reply

Your email address will not be published.