Elementor #2115

General Purpose RTD

Rs 300 / Piece

Model Series-4
Warranty YAS
Brand DWYER USA
Condition New
Size 1/2″ NPT, or 3/4″ NPT
Tip Temperature 450 Degree C (842 Degree F)
General Purpose RTD


General Purpose RTD’s are low cost and offered in a variety of configurations. Tip temperatures can be as high as 450°C (842°F) for fiberglass insulated wire, or 200°C (392°F) for FEP insulated wire. Models specified with a head cover can be ordered with no process connection, 1/2″ NPT, or 3/4″ NPT process connections. For higher temperatures, see Series R Mineral Insulated RTDs.

Other Details:

Model Description
122087-00 FEP insulation extension 100ΩRTD, 6″ length, #6 spade terminal.
122087-01 FEP insulation extension 100ΩRTD, 12″ length, #6 spade terminal.
122087-02 FEP insulation extension 100ΩRTD, 18″ length, #6 spade terminal.
122095-04 General purpose (3-wire) 100ΩRTD with #6 spade terminals.
122095-14 Rigid extension 100ΩRTD, 24″ length, open terminal.
122095-17 Flex hose extension 100ΩRTD, 0° bend, #6 spade terminal.
122095-25 Stainless steel overbraid extension 100ΩRTD, 0° bend, #6 spade terminal.

Additional Information:

  • Item Code: Series-4

1/16 Din Temperature And Process Controller

Rs 5,500 / Piece

Condition New
Weight 4 oz (114 g).
Applications Food service equipment.
Brand DWYER USA
Model Number Series-16B
Usage/Application Medical equipment
Application Environmental chambers.
Display Type Two 4-digit, 7 segment .25″ H (6.35 mm) LED’s. PV red; SV green.
Accuracy +/-0.25% span, +/-1 least significant digit.
Supply Voltage 100 to 240 VAC, 50/60 Hz or 24 VDC (depending on model)
Operating Temperature 32 to 122 Degree F (0 to 50 Degree C).
Front Panel Rating IP56
Power Consumption 5 VA max.
1/16 Din Temperature And Process Controller


Monitor and control temperature or process applications with precision using the Series 16B controllers. The units offer two separate outputs for dual loop control in direct or reverse acting. Select relay, voltage, or current output combined with a second relay output.

The Series 16B provides dual LED displays for local indication of process value and setpoint value. Output status, engineering scale, auto tuning and alarm status is also indicated on the front panel.

Control methods include ON/OFF, PID, self-tune and manual tune. PID control is supported with 64 ramp/soak control actions. Two additional alarm outputs are standard on the Series 16B. The alarm outputs can be quickly configured by using the thirteen built-in alarm functions.

The controller easily communicates with other external devices such as PC’s and PLC’s for data search and system integration using the built-in RS-485 interface. Up to 247 communication addresses are available with transmission speeds of 2400 to 38,400 bps. The Series 16B also features universal input, selectable °F/°C, selectable resolution and security functions.

Features:

  • Universal input accepts process transmitters, RTD’s or thermocouple signals
  • On/off, PID, or manual output control
  • RS-485 standard on all models
  • Stage control program for up to 64 ramp/soak actions


Specification:

  • Inputs : Thermocouple, RTD, DC voltages or DC current.
  • Memory Backup : Nonvolatile memory.
  • Control Output Ratings : Relay: SPST, 5 A @ 250 VAC resistive; Voltage Pulse: 14 V, 10% to -20% (max 40 mA); Current: 4 to 20 mA.
  • Communication : RS-485 Modbus® A-5-11/RTU communication protocol.

Applications:

  • Control temperature for boilers, damper control based on temperature or pressure.
  • Hot plates/melt pots.
  • Packaging equipment.
  • Environmental chambers.
  • Medical equipment.
  • Food service equipment.

Additional Information:

  • Item Code: Series-16B

1/4 DIN Temperature and Process Controller

Rs 5,500 / Piece

Condition New
Model No Series-4B
Item Code Series-4B
Make DWYER USA
Usage/Application Control temperature for boilers, damper control based on temperature or pressure
Brand DWYER USA
Weight 15 oz (425 g).
Supply Voltage 100 to 240 VAC, 50/60 Hz.
Power Consumption 5 VA max.
Operating Temperature 32 to 122 Degree F (0 to 50 Degree C).
Front Panel Rating IP56
1/4 DIN Temperature and Process Controller


The Series 4B 1/4 DIN Temperature/Process Controller is designed to accept thermocouple, RTD, current or voltage input and provide dual outputs for control. Available outputs include relay/relay, voltage pulse/relay, current/relay, or linear voltage/relay.

The units can be programmed for ON/OFF, PID, auto-tuning, or manual tuning control methods. The PID control is supported by 64 ramp/soak actions. The Series 4B also includes two additional alarm outputs. The second relay output can be reconfigured as a third alarm output. The alarm type can be selected from 13 different preprogrammed alarm functions. The controller features dual LED displays for local indication of process and setpoint values.

Features:

  • Universal input accepts process transmitters, RTD’s or thermocouple signals
  • On/off, PID, or manual output control
  • RS-485 standard on all models
  • Stage control program for up to 64 ramp/soak actions

Specification:

  • Inputs : Thermocouple, RTD, DC voltages or DC current.
  • Display : Two 4-digit, 7 segment. PV: 3/4″ H (19 mm) red; SV: 1/2″ H (12.7 mm) green.
  • Accuracy : ±0.25% span, ±1 least significant digit.
  • Memory Backup : Nonvolatile memory.
  • Control Output Ratings : Relay: SPDT, 5 A @ 250 VAC resistive; Voltage Pulse: 14 V, 10% to -20% (max 40 mA); Current: 4 to 20 mA; Linear Voltage: 0-10 V.
  • Communication : RS-485 Modbus® A-5-11/RTU communication protocol.

Applications:

  • Control temperature for boilers, damper control based on temperature or pressure.
  • Hot plates/melt pots.
  • Packaging equipment.
  • Environmental chambers.
  • Medical equipment.
  • Food service equipment.

Additional Information:

  • Item Code: Series-4B
 

Bimetal Thermometer

Rs 1,500 / Piece

Usage/Application Treatment plant temperature monitoring
Brand DWYER USA
Model No. Series-BT
Accuracy +/-2% FS.
Application Chiller or boiler water temperature monitoring
Wetted Materials 304 SS.
Housing Material Series 300 SS.
Lens Glass
Stem Diameter 1/4″ O.D.
Response Time 40 seconds.
Bimetal Thermometer

The SERIES BT Bimetal Thermometersoffer accurate, reliable service even in the toughest environments. These corrosion resistant units are constructed from stainless steel and are hermetically sealed to prevent crystal fogging. The bimetal element directly drives pointer, eliminating gears and linkage. An external reset screw allows field calibration and easy-to-read aluminum dial minimizes parallax error. Choose back connection, lower connection or adjustable angle for easy viewing and installation. Adjustable models can be rotated a full 360° and tilted over a 180° arc. NOTE: When using in pressurized applications, use a suitable thermowell.

Features: 

  • Hermetically sealed
  • Adjustable dial position models


Specification:

  • Temperature Limits : Head: 200°F (93°C); Stem: Not to exceed 50% over-range or 1000°F (538°C) or 800°F (427°C) continuously.
  • Process Connection : 1/4″ NPT on 2″ dial size; 1/2″ NPT on 3″ or 5″ dial size.
  • Immersion Depth : Minimum 2″ in liquids, 4″ in gas.

Applications:

  • Chiller or boiler water temperature monitoring
  • Treatment plant temperature monitoring

Request
Callback

Additional Information:

  • Item Code: Series-BT
 

DIN Rail Temperature and Process Controller

Rs 7,500 / Piece

Memory Backup Non-volatile.
Brand DWYER USA
Usage/Application Oven, boiler, or chiller control
Power Consumption 3 W.
Model Number Series-SCD
Weight 2.7 oz (76.5 g).
Item Code Series-SCD
Supply Voltage 24 VDC
Operating Temperature 32 to 122 Degree F (0 to 50 Degree C).
DIN Rail Temperature and Process Controller


The DIN Rail Mount SERIES SCD offers multiple PID loops in a compact size. Each SCD-1000 master controller can be combined with up to seven SCD-2000 slave controllers without any wires. Each controller has one universal input, one relay output and one user selected output.

Features:

  • Expandable from 1 to 8 process control loops
  • Universal transmitter or temperature sensor inputs
  • RS-485 Modbus® communication
  • Dual loop or single loop/alarm output control

Specification:

  • Control Output Ratings : Relay: 3 A @ 250 VAC resistive; Voltage pulse: 12 VDC, max. output current: 40 mA; Current: 4 to 20 mA output; Linear voltage: 0 to 10 VDC.
  • Communication : RS-485 Modbus® A-5-11/RTU communication protocol.


Applications:

  • Oven, boiler, or chiller control
  • Hot plates/melt pots
  • Packaging equipment
  • Environmental chambers
  • Medical equipment
  • Food service equipment
Other Details:

Model Description
SCD-1023 DIN rail temperature/process master controller, (1) voltage pulse output and (1) relay output.
SCD-1033 DIN rail temperature/process master controller, (2) relay outputs.
SCD-1053 DIN rail temperature/process master controller, (1) current output and (1) relay output.
SCD-1063 DIN rail temperature/process master controller, (1) linear voltage output and (1) relay output.
SCD-2023 DIN rail temperature/process slave controller, (1) voltage pulse output and (1) relay output.
SCD-2033 DIN rail temperature/process slave controller, (2) relay outputs.
SCD-2053 DIN rail temperature/process slave controller, (1) current output and (1) relay output.
SCD-2063 DIN rail temperature/process slave controller, (1) linear voltage output and (1) relay output.

Additional Information:

  • Item Code: Series-SCD

Digital Solar Powered Bimetal Thermometer

Rs 5,200 / Piece

Condition New
Application Commercial
Usage Commercial
Weight 12 oz (350 g).
Usage/Application Boiler or chiller temperature monitoring
Model Series-DBT
Response Time 15 seconds.
Accuracy 32 to 122 Degree F (0 to 50 Degree C) +/-1% FS.
Display 3-1/2 digit LCD.
Wetted Materials 304 SS.
Housing Material 300 SS
Lens Acrylic
Dial Size 3″.
Process Connection 1/2″ NPT, adjustable angle.
Supply Power 3-volt solar cell (minimum 35 LUX required).
Digital Solar Powered Bimetal Thermometer


The SERIES DBT Digital Solar-Powered Bimetal Thermometer takes the guesswork out of temperature measurement. The 3-1/2 digit LED display is easy to read and provides resolution to 0.1°F. The adjustable angle can be mounted in virtually any position. The engineering units can be selected in the field by removing the back cover.

Features:

  • Field selectable °F or °C temperature units
  • 0.1° resolution
  • Adjustable dial position

 
Applications:

  • Boiler or chiller temperature monitoring
  • HVAC duct monitoring

Additional Information:

  • Item Code: Series-DBT
 

Digital Temperature Switch

Rs 3,500 / Piece

Application Commercial
Weight 2.3 oz (65 g).
Resolution 1 Degree
Brand Dwyer Usa
Usage/Application Industrial
Storage Temperature -4 to 176 Degree F (-20 to 80 Degree C).
Display Range 3-digit, red, 1/2″ digits.
Model Series-TS2
Accuracy +/-1% of FS.
Condition New
Probe Range -58 to 302 Degree F (-50 to 150 Degree C).
Horsepower Rating 1 HP.
Power Requirement 115 VAC, 230 VAC, 12 VAC/VDC, or 24 VAC/VDC.
Ambient Temperature 32 to 158 Degree F (0 to 70 Degree C).
Front Panel Rating IP64
Digital Temperature Switch


Monitor and control temperature for heating and cooling applications with the Series TS2 Digital Temperature Switch. The Series TS2 offers twelve programmable functions to customize the unit to fit application requirements. Use the 15(5) Amp SPDT relay output to drive a motor, compressor, or fan. Designed with the OEM in mind, the TS2 offers the ability to configure multiple units with the touch of a button.

Programming multiple units is quick and easy. Simply program one switch with the desired parameter settings and connect the configuration key (sold separately) to the back of the unit. Press the button on the configuration key and download the parameter settings. Connect the key to the other switches to upload the stored settings with the push of a button.

The TS2 features set point adjustments, static defrost timing, compressor mean time, hysteresis, and ambient probe adjustment. Security protection is offered using a password code. The Series TS2 Digital Temperature Switches are designed to operate with PTC (1000Ω @ 25°C) probes sold separately.

Features:

  • Simple to use temperature control device
  • Configuration key
  • Input : PTC thermistor (1000Ω @ 25°C).
  • Output : 16 A SPDT relay @ 250 VAC resistive 5 A inductive..
  • Control Type : On/off.


Applications:

  • Refrigerators
  • Chillers
  • Food service equipment
  • Medical sterilizers or equipment
Other Details:

Model Description
TS2-010 Digital temperature switch, 110 VAC, °F display.
TS2-011 Digital temperature switch, 110 VAC, °C display.
TS2-020 Digital temperature switch, 230 VAC, °F display.
TS2-021 Digital temperature switch, 230 VAC, °C display.
TS2-030 Digital temperature switch, 12 VAC/VDC, °F display.
TS2-040 Digital temperature switch, 24 VAC/VDC, °F display.

Additional Information:

  • Item Code: Series-TS2

Digital Touch Screen Programmable Thermostat with Heat Pump Control

Rs 7,500/ Piece

Resolution 1 Degree F (0.5 Degree C).
Storage Temperature 23 to 122 Degree F (-5 to 50 Degree C).
Model Number Model-TLVT1
Brand DWYER USA
Weight 10 oz (283.5 g).
Usage/Application Industrial
Condition New
Accuracy +/-1 Degree F (0.5 Degree C).
Application Commercial
Range Measurement 32 to 99 Degree F (0 to 40 Degree C), Adjustment 41 to 95 Degree F (5 to 35 Degree C).
Sensor Type NTC thermistor.
Power (2) AA alkaline batteries, not included.
Output Power 1 A 24 VAC 50/60 Hz.
Operating Temperaure 32 to 122 Degree F (0 to 50 Degree C)
Digital Touch Screen Programmable Thermostat with Heat Pump Control

The MODEL TLVT1 Digital Touch Screen Programmable Thermostat with Heat Pump simplifies controlling indoor temperatures in commercial and residential buildings. A large easy to read LCD display shows the current temperature, set point, as well as time and day of the week. By touching the icons on the display, building occupants can temporarily change the set point, edit the weekly program, or select the control mode. For larger offices or homes, a single thermostat can control up to two heating and two cooling units. For Heat pump applications, the thermostat can control a two stage compressor. To make programming the time easier, there is a daylight savings time function that will automatically change the time based on the US time change dates. To prevent tampering, the Model TLVT1 has a security code feature that can lock out the programming. For additional energy savings, the filter, UV and energy usage timers tracks the number of hours the fan, heater/cooler, and thermostat is powered on. Additional energy savings can be achieved by programming the thermostat for up to 4 temperature events for each day of the week.

Features:

  • Weekday and weekend programs; 4 events per day
  • Large touch LCD display
  • Two-stage heating and cooling control
  • Security code setting protection
  • Filter and energy use timers

Applications:

  • Commercial or residential indoor temperature control

Additional Information:

  • Item Code: Model-TLVT1
 

Duct And Immersion Building Automation Temperature Sensor

Rs 2,200 / Piece

Certification YAS
Weight 5.3 oz (150.3 g).
Application Commercial
Usage/Application Industrial
Model Series-TE
Brand DWYER USA
Operating Temperature -40 to 302 Degree F (-40 to 150 Degree C).
Condition New
Housing Material Meets UL, 94 V-O polycarbonate plastic.
Thermowell Material TE-I 304 SS.
Housing Rating NEMA 4X (IP66) (DFW, IBW only)
Cable Rating Plenum option includes UL listed plenum cable.
Duct And Immersion Building Automation Temperature Sensor


The SERIES TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.

For variable air volume applications, the Series TE can be configured to have 8′ plenum rated cable with flying leads. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. For housing models, multiple knockouts provide easy conduit access to any side of the housing. The 1/4 turn lid comes with a chain to prevent it from being lost during installation.

Features:

  • Easy to mount external tab housing and flange options for duct applications
  • 1/4 turn housing cover with chain to prevent dropping
  • Multiple conduit knockouts for easy installation positioning
  • 8´ plenum rated cable option
  • Terminal connector eliminates need for wire nuts
  • Accuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor DIN Class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).


Applications:

  • Building automation
  • VAV temperature sensing
  • Chiller or boiler loops
  • AHU monitoring

Additional Information:

  • Item Code: Series-TE
 

Explosion Proof RTD Temperature Transmitter

Rs 1,750 / Piece

Application Commercial
Model Number Series-TTE
Response Time 250 ms.
Condition New
Brand DWYER USA
Pressure 2000 psi (137.9 bar).
Usage/Application Industrial
Temperature Sensor Pt1000, 0.00385 DIN.
Wetted Materials 316 SS.
Process Connection 1/2″ male NPT.
Conduit Connection 1/2″ female NPT.
Probe Length 2″ to 18″
Power Requirements 10 to 35 VDC.
Output Signal 4 to 20 mA
Optional Display 2 lines X 8 character LCD.
Explosion Proof RTD Temperature Transmitter


The SERIES TTE Explosion-Proof RTD Temperature Transmitter is the ideal product for hazardous temperature measurement applications. The TTE series has seven pre-programmed temperature ranges that are selectable via an internal dip switch. For those applications that need a custom range, the transmitter can be easily configured for any range between -30 to 250°F with a minimum span of 40°F. The span and zero can be quickly adjusted with a simple push button design. The compact housing allows for the transmitter to be mounted in virtually any application.

Features:

  • FM approved for Class I, Groups B, C, D; Class II, Groups E, F, G classified explosive environments
  • Optional LCD
  • Output span selected from seven common ranges or user determined

Applications:

  • Explosive process environments
  • Offshore HVAC monitoring

Additional Information:

  • Item Code: Series-TTE
 

High Temperature Data Logger

Rs 3,800 / Piece

Usage Industrial
Resolution 0.02 Degree F (0.01 Degree C).
Battery Life 1 year (approx).
Weight 4.2 oz (120 g).
Temperature Range -4 to 284 Degree F (-20 to 140 Degree C).
Usage/Application Thermal testing
Model Series-HTDL-20-30
Brand Dwyer USA
Range -328 to 50 Degree F (-200 to 260 Degree C).
Memory Size 32700 Readings.
Sampling Rate Selectable from 1 s. to 24 hrs.
Housing Material 316 SS.
High Temperature Data Logger

The Model HTDL-20/30 is a high temperature data logger that can measure temperatures up to 500°F (260°C) and record up to 32,700 measurements.
Features:Submersible and portableTemperature measurement up to 500°FRemote probe option for chamber or oven loggingDelay startup timer

Specification:Accuracy : 0.18°F (0.1°C) @ 68 to 284°F (20 to 140°C); 0.54°F (0.3°C) @ -4 to 67.98°F (-20 to 19.99°C).Sampling Method : Stop on memory full or continuous recording.Computer Requirements : Windows® Xp Sp3, Windows Vista®, Windows® 7 operating systems.Power Requirements : 3.6 V 1/2 AA ER14250SM lithium metal battery, installed functional, user replaceable.Interface : Docking station and USB cable.

Applications:

Thermal testingProcess monitoring or troubleshooting
Other Details:Model DescriptionHTDL-20 High temperature data logger with 2″ rigid probe.HTDL-30 High temperature data logger with 24″ flexible probe.

Additional Information:

  • Item Code: Series-HTDL-20-30
 

Immersion Temperature Sensors

Rs 2,000 / Piece

Weight 5.3 oz (150.3 g).
Warranty 5 year
Condition New
Applications Building automation
Usage/Application Chiller or boiler loops
Place Of Origin DELHI
Brand DWYER USA
Operating Temperaure -40 to 302 Degree F (-40 to 150 Degree C).
Housing Material Meets UL, 94 V-O polycarbonate plastic.
Thermowell Material 304 SS.
Thermowell Connection Internal = 1/2″ NPSM; External = 1/2″ NPT.
Immersion Temperature Sensors

The SERIES TE-I Immersion Style Temperature Sensors accurately measure water temperature inside chilled and hot water loops in HVAC systems. Thermowells are required to protect the electrical connection from the process water and to allow replacement of the sensors without draining the system.

Features:

  • 1/4 turn housing cover with chain to prevent dropping
  • Multiple conduit knockouts for easy installation positioning
  • Integral 1/2″ NPSM connection for direct mounting to a thermowell
  • General purpose or weatherproof enclosure options
  • Terminal connection eliminates need for wire nutsAccuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor DIN Class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).

Applications:

  • Chiller or boiler loops
  • Building automation
Other Details:

Model Description
TE-TNS-N043N-00 Thermowell, 304SS, 4″ insertion length.
TE-TNS-N063N-00 Thermowell, 304SS, 6″ insertion length.
TE-TNS-N083N-00 Thermowell, 304SS, 8″ insertion length.
TE-TNS-N123N-00 Thermowell, 304SS, 12″ insertion length.
TE-TNS-N183N-00 Thermowell, 304SS, 18″ insertion length.
TE-TNS-N253N-00 Thermowell, 304SS, 2.5″ insertion length.

Additional Information:

  • Item Code: Series-TE-I

Industrial Thermometer

Rs 1,750 / Piece

Condition NEW
Model Series-IT
Brand Dwyer Usa
Weight 1 lb 7 oz (0.65 kg).
Wetted Material Tapered cast aluminum with graphite fill.
Housing Material Aluminum
Lens Glass
Process Connection 1-1/4-18 NEF thread.
Liquid Filling Organic blue liquid filled tube
Industrial Thermometer

The Series IT Industrial Thermometer allows users to easily take accurate temperature measurements in any environment. The case of the IT series is made of die cast aluminum for extra durability in industrial environments. The glass lens is easily cleaned and resists scratches for better viewing of the scale. The stem can be adjusted 180° in order to achieve the best viewing angle. The blue organic fill is non-toxic and allows users to better see the temperature reading. The scales can be ordered with dual units, °F, or °C.

Additional Information:

  • Item Code: Series-IT
 

Outdoor Temperature Sensors

Rs 2,100 / Piece

Weight 0.65 lb (295 g).
Brand DWYER USA
Model The Series TE-OND-TE-RND-TE-OS
Condition New
Place Of Origin Delhi
Operating Temperaure -40 to 302 Degree F (-40 to 150 Degree C).
Housing Material Polycarbonate
Enclosure Rating TE-OND/TE-RND NEMA 4X (IP65); TE-OSA NEMA 3R (IP54)
Outdoor Temperature Sensors

The Series TE-OND/TE-RND/TE-OSA Outdoor Air Temperature Sensors are offered in two different configurations to increase measurement accuracy by reducing radiated heat effects. For applications where the north side of the building is accessible, the TE-OND/TE-OSA can be used to protect against low levels of radiated heat. If the sensor must be mounted in direct sunlight or a more precise measurement is required, our six plate radiation shield mounts over the temperature probe. The TE-RND radiation shield models can be surface or pipe mounted. All models include removeable terminal blocks to simplify wiring.

Specification:

  • Accuracy : Thermistor temperature sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temperature sensor: DIN class A: ±0.15°C @ 0°C (±0.28°F @ 32°F).
 

Pressure and Temperature Data Logger

Rs 3,500 / Piece

Brand Dwyer Usa
Material Stainless steel.
Condition NEW
Battery Life 1 year (approx).
Model Series-DLP
Usage/Application Clean Room
Weight 12 oz (340 g).
Memory Size 16383 readings per channel.
Sampling Rate Selectable from 2 sec to 12 hrs.
Interface USB port (interface cable required).
Pressure and Temperature Data Logger


The Series DLP Data Logger can record pressure and temperature. The 1/4″ NPT fitting comes standard and allows the logger to be adapted to almost any pressure fitting. The internal temperature sensor provides accurate temperature measurements without the need of a separate temperature recorder, and many of the models provide a choice between measuring pressure in psia or psig. The DLP can easily be started and stopped from a PC or delayed to start up to six months in advance. The battery-powered data logger can store over 16,000 measurements per channel, and the easy to use DL700 software makes retrieving data simple.

Features:

  • Efficient data capture tool to review processes are running correctly or to analyze alarm and out-of-spec conditions
  • Battery-powered reduces need to hard wire power allowing device to be used in a as a tool in a variety of in-and-out testing
  • PC start and stopping allows centralized control of data collection


Specification:

  • Range : Temperature: -40 to 176°F (-40 to 80°C); Pressure: 0 to 30 psia(g), 0 to 100 psia(g), 0 to 300 psia(g), 0 to 500 psia(g), 0 to 1000 psia, and 0 to 5000 psia depending on the model.
  • Accuracy : Temperature: ±0.9°F (±0.5°C); Pressure: 2% FSR, 0.25% at 77°F (25°C) typical.
  • Resolution : Temperature: 0.2°F (0.1°C); Pressure: 0.002 psia(g), 0.005 psia(g), 0.05 psia(g), 0.05 psia, and 0.2 psia depending on the model.
  • Sampling Method : Stop on memory full.
  • Computer Requirements : Windows® 95, Windows® 98, Windows® 2000, Windows® ME, Windows NT®, and Windows® XP operating system, one free USB port.
  • Power Requirements : 3.6 V TL2150 lithium metal battery, installed functional, user replaceable.

Applications:

  • Building automation
  • Clean room
  • Operating rooms
  • Process applications
  • Labs
  • Regulated environments
Other Details:

Model Description
DLP-A08 Pressure/temperature data logger, range 0-30 psia.
DLP-A10 Pressure/temperature data logger, range 0-100 psia.
DLP-A13 Pressure/temperature data logger, range 0-300 psia.
DLP-A14 Pressure/temperature data logger, range 0-500 psia.
DLP-A15 Pressure/temperature data logger, range 0-1000 psia.
DLP-A19 Pressure/temperature data logger, range 0-5000 psia.
DLP-G08 Pressure/temperature data logger, range 0-30 psig.
DLP-G10 Pressure/temperature data logger, range 0-100 psig.
DLP-G13 Pressure/temperature data logger, range 0-300 psig.
DLP-G14 Pressure/temperature data logger, range 0-500 psig.

Additional Information:

  • Item Code: Series-DLP

RHP Humidity and Temperature Transmitter

Rs 4,200 / Piece

Condition New
Applications Outdoor temperature and relative humidity reference
Temperature -40 to 140 Degree F (-40 to 60 Degree C).
Weight 616 lb .3 kg
Brand DWYER USA
Usage/Application Pool room humidity monitoring
Storage Temperature -40 to 176 Degree F (-40 to 80 Degree C).
Model Series-RHP
Application Air economizers
Humidity 0 to 100% RH.
Hysteresis +/-1%.
Repeatability +/-0.1% typical.
RHP Humidity and Temperature Transmitter


The Series RHP Temperature and Humidity Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.

Features:

  • 2%, 3%, or 5% accuracy models
  • Optional LCD display on duct mount models
  • Radiation shield option for outdoor installation in direct sunlight

Specification:

  • Accuracy, RH : RHP-2XXX ±2% 10 to 90% RH @ 25°C;RHP-3XXX ±3% 20 to 80% RH @ 25°C;RHP-5XXX ±5% 20 to 80% RH @ 25°C.
  • Accuracy, Thermistor Temp Sensor : ±0.2°C @ 25°C (±0.36°F @ 77°F).
  • Accuracy, RTD Temp Sensor : DIN Class B; ±0.3°C @ 0°C (±0.54°F @ 32°F).
  • Accuracy, Solid State Band Gap : ±0.9°F @ 77°F (±0.3°C @ 25°C).
  • 4 to 20 mA Loop Powered Models:Power requirements: 10 to 35 VDC; Output signal: 4 to 20 mA.
  • 0-5/10 V Output Models : Power requirements: 15 to 35 VDC or 15 to 29 VAC; Output signal: 0 to 10 V @ 5 mA max.
  • Solid State Band Gap Temp Sensor Output Ranges : Switch selectable, -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C).
  • Response Time : 15 s.
  • Electrical Connections : Removable screw terminal block.
  • Conduit Connection : Duct Mount: 1/2″ NPS; OSA: 1/2″ (22.3 mm).
  • Drift : <1% RH/year.
  • RH Sensor : Capacitance polymer.
  • Temperature Sensor : >Types 1, 2, 3: Solid state band gap; Curves A,B,C; Thermistor; Curves D,E; Platinum RTD DIN 385.
  • Enclosure : Duct Mount: PBT; OSA: Polycarbonate.
  • Enclosure Rating : Duct mount: NEMA 4X (IP66) for housing only; OSA: NEMA 4X (IP66).
  • Display : Duct Mount only, optional 2-line alpha numeric, 8 characters/line.
  • Display Resolution : RH: 0.1%; 0.1°F (0.1°C).
  • Weight : Duct Mount: .616 lb (.3 kg) OSA: 1 lb (.45 kg).

Applications:

  • Air economizers
  • Outdoor temperature and relative humidity reference
  • Pool room humidity monitoring

Additional Information:

  • Item Code: Series-RHP
 

RS-485 Serial Communications Module

Rs 30,000 / Piece

Application Refrigerated cabinets
Condition New
Model Number Model-TS485
Applications Walk in coolers
Usage/Application Food service equipment
Place Of Origin DELHI
Brand DWYER USA
Minimum Order Quantity 1 Unit
Compatible Devices TS3, TSX3, TCS, TS2, TSS2, and TSW.
Communication Type RS-485 full duplex.
Electrical Isolation 2500 VAC.
RS-485 Serial Communications Module


The MODEL TS485 Serial Communications Module allows users to read the current temperature and parameter settings of the Love Controls family of temperature switches. The configuration key port on the temperature switch provides the data signal and power for the RS-485 module. For applications with multiple temperature switches, the modules can be daisy chained together so that only two wires need to be brought to the PC. The Model TS485 is compatible with Series TS3, TSX3, TCS, TS2, TSS2, TSW.

Features: 

  • Field configurable RS-485 communication

Applications:

  • Refrigerated cabinets
  • Walk in coolers
  • Food service equipment
  • Medical sterilizers or equipment
  • Wood or pellet boilers
  • Brewing systems

Additional Information:

  • Item Code: Model-TS485
 

Resistance Temperature Detector

Rs 650 / Piece

Temperature Range -328 to 1202 Degree F (-200 to 650 Degree C).
Sensor Type Wire wound, 100
Application Air ducts
Applications Bearing temperature
Place Of Origin DELHI
Condition New
Brand DWYER USA
Model Number Series-RTD
Usage/Application Oil temperature indicator
Pressure 250 psig (17.2 bar).
Probe Material 316 SS.
Extension Length 30″ (76 cm).
Standard DIN .00385 (Class B, 0.12%).
Resistance Temperature Detector


Precision SERIES RTD (Resistance Temperature Detector) offers excellent accuracy and stability over a wide temperature range. Industry standard 3-wire 100 ohm (DIN) probes are available in 6″ (15 cm), 12″ (30.5 cm) or 18″ (46 cm) sheath lengths with 30″ (76 cm) extension cable and spade lug terminals.

Features:
 

  • 304 stainless steel sheath
  • High temperature rating


Applications:

  • Air ducts
  • Bearing temperature
  • Oil temperature indicator
  • Soldering equipment
  • Ovens
  • Environmental test chambers
  • Pharmaceutical manufacturing
  • Food processing
  • Plastic molding
  • Petroleum & chemical processing
  • Electric generating plants

Additional Information:

  • Item Code: Series-RTD
 

Side Reading Bimetal Thermometer

Rs 1,200 / Piece

Resolution 2% of scale.
Accuracy +/-2% FS.
Place Of Origin DELHI
Weight 9.2 oz (260 g).
Usage/Application Tank or vessel monitoring
Brand DWYER USA
Model Series-BTL
Condition New
Wetted Materials 304 SS.
Lens Glass
Ambient Temperature -40 to 392 Degree F (-40 to 200 Degree C).
Dial Size 3″.
Process Connection 1/2″ NPT.
Side Reading Bimetal Thermometer

The SERIES BTL Side Reading Bimetal Thermometers are a great fit for tight, compact areas. These horizontally mounted thermometers face upright to allow quick and easy measurements.

Features:

  • Dial face positioned for horizontal mounting
  • Scratch resistant lens


Applications:
 

  • Tank or vessel monitoring

Additional Information:

  • Item Code: Series-BTL
 

Temperature Switches

Rs 4,500 / Piece

Weight 5 lb (2.3 kg).
Condition New
Model Series-DA-7035N
Usage/Application Mechanical process temperature monitoring
Brand Dwyer Usa
Place Of Origin DELHI
Wetted Materials Bulb and connection 304 SS
Ambient Operating Temperature 180 Degree F (82 Degree C).
Pressure Limit 300 psi (20.6 bar).
Repeatability +/-1% of FS.
Temperature Switches


The SERIES DA-7035N Temperature Switches include the same time-proven switching mechanism used in our Series DA pressure switches. Bourdon tube ensures high sensitivity and long life. Fully adjustable deadband makes units suitable for a wide range of control applications. Visible, calibrated dial and external adjustments make changing set points simple and fast.

Feature:s

  • Adjustable deadband
  • Snap action switch standard
  • Inert gas activated Bourdon tube
  • No cross ambient temperature effects
  • No bulb elevation correction required
  • Visible dial calibrated in both °F and °C
  • Visible on/off indication


Specification:

  • Service : Compatible liquids or gases.
  • Enclosure Rating : General purpose. Optional weatherproof and explosion-proof.
  • Switch Type : SPDT snap switch. Optional DPDT snap and a variety of mercury switches.
  • Electrical Rating : 10 A @ 120/240/480 VAC.
  • Electrical Connections : Screw terminal.
  • Conduit Connection : 7/8″ (22.23 mm) hole for 1/2″ (12.7 mm) conduit hub.
  • Process Connection : 3/4″ male NPT. Other sizes available.
  • Mounting Orientation : Vertical and level.
  • Set Point Adjustment : External knobs for set point and reset point.
  • Deadband : Adjustable from minimum in model chart to full range. Optional low fixed deadband.
  • Capillary : 6′ (1.8 m) standard. Ranges 1N – 7N, and 10N: copper. Ranges 8N, 9N, 11N: 304 SS.
  • Set Point Scale : Indication in °F and °C.
  • Options : See switch type, see enclosures, fixed deadband, longer or shorter capillary, armored capillary, wells, two stage, 1/2″ or 1″ connection sizes, manual reset.

Applications:

  • Mechanical process temperature monitoring
Other Details:

Model Description
DA-7035-153-10N Temperature switch, range 100-300°F (40-150°C), max. temp. 500°F (260°C), min. deadband 50°F (28°C).
DA-7035-153-11N Temperature switch, range 100-500°F (40-260°C), max. temp. 600°F (315°C), min. deadband 100°F (56°C).
DA-7035-153-1N Temperature switch, range -60 to 30°F (-50 to 0°C), max. temp. 150°F (65°C), min. deadband 23°F (13°C).
DA-7035-153-3N Temperature switch, range 0-100°F (-50 to 0°C), max. temp. 240°F (115°C), min. deadband 25°F (14°C).
DA-7035-153-4N Temperature switch, range 50-150°F (10-65°C), max. temp. 250°F (120°C), min. deadband 25°F (14°C).
DA-7035-153-5N Temperature switch, range 100-200°F (40-95°C), max. temp. 300°F (150°C), min. deadband 25°F (14°C).
DA-7035-153-7N Temperature switch, range 140-300°F (60-150°C), max. temp. 500°F (260°C), min. deadband 41°F (23°C).
DA-7035-153-8N Temperature switch, range 250-415°F (120-215°C), max. temp. 550°F (260°C), min. deadband 42°F (23°C).
DA-7035-153-9N Temperature switch, range 350-550°F (175-290°C), max. temp. 600°F (315°C), min. deadband 50°F (28°C).

Additional Information:

  • Item Code: Series-DA-7035N

Temperature Transmitter

Rs 4,200 / Piece

Applications HVAC system monitoring
Model Series-650
Place Of Origin DELHI
Accuracy +/-0.3% FS 20 Degree C (68 Degree F).
Usage/Application HVAC system monitoring
Power Requirement 12 to 35 volts DC.
Condition New
Brand DWYER USA
Output Signal 4 to 20 mA DC.
Linearity Within 0.25% of span.
Probe Construction 6″ long, 0.25″ O.D. Type 304 SS.
Ambient Operating Temperature 0 to 70 Degree C (32 to 158 Degree F).
Temperature Transmitter

The SERIES 650 Temperature Transmitter is ideal for a wide variety of HVAC, industrial and commercial multi-point temperature monitoring applications. Non-polarized terminals simplify connection to any 12-35 VDC power supply. Capable of operation with long cable runs, Series 650 Transmitters are well suited for monitoring air or water temperatures at remote locations. Three models are stocked in popular ranges factory calibrated within 0.3% of span. All are linear within 0.25% of span and may be recalibrated within low range and span limits shown on Catalog page. Low range is temperature corresponding to 4 mA output. Span is temperature difference between Low and High ranges corresponding to 4-20 mA output signal.

Features: 

  • Field adjustable span
  • Low profile transmitter housing
  • Non-polarized wiring


Specification:

  • Thermal Drift : Less than 0.5% of span over ambient temperature range of 0 to 50°C (32 to 122°F).
  • Temperature Limits (Probe) : 204°C (400°F).
  • Probe Cable Length : 7 ft (2.1 m).
  • Voltage Stability : Output error less than 0.01% of span over the specified supply voltage range.

Applications:

  • HVAC system monitoring
Other Details:

Model Description
650-1 Temperature transmitter, stocked range -23° to +10°C, low range limits: min. -32°C & max. -14°C, span limits: min. 24°C & max. 48°C.
650-2 Temperature transmitter, stocked range -7° to +49°C, low range limits: min. -12°C & max. +6°C, span limits: min. 37°C & max. 150°C.
650-3 Temperature transmitter, stocked range 0° to +100°C, low range limits: min. -12°C & max. +6°C, span limits: min. 37°C & max. 150°C.

Additional Information:

  • Item Code: Series-650

Temperature Transmitter

Rs 4,200 / Piece

Condition New
Usage Process applications where a 4 to 20 mA signal is required
Place Of Origin DELHI
Output 4 to 20 mA DC, linearized.
Response Time 10 to 90% in 200 ms (models 651A), 70% in 2 ms (models 651TC).
Brand DWYER USA
Ambient Temperature 32 to 122 Degree F (0 to 50 Degree C).
Storage Temperature 160 Degree F (70 Degree C)
Model Number Series-651
Usage/Application Process Applications where a 4 to 20 mA signal is required
Transmitter Type 2 Wire.
Power Requirements 10 to 32 VDC
Temperature Transmitter


Linearized output for precise temperature monitoring or control is combined with small size and quick, easy mounting. Rugged Series 651 Transmitters are designed for use with 2 or 3-wire Pt100 RTDs (to DIN standard 43760 or BS1904) or ungrounded Type K thermocouples. Thermocouple Models 651TC are cold junction compensated, automatic 32 to 160°F (0 to 70°C) with upscale burnout. These economical devices provide the accuracy and reliability you need at the lowest possible cost.

Features:

  • Various preset ranges available
  • Pt100 or K type thermocouple models
  • Standard temperature sensor head enclosure mounting

Specification:

  • Input : 2 or 3-wire Pt100 RTD (models 651A), or ungrounded Type K thermocouple (models 651TC).
  • Output Impedance : 700 Ω @ 24 VDC.
  • Accuracy : ±0.2°C plus 0.2% reading (models 651A), ±0.1% FS plus cold junction errors (models 651TC).
  • Temperature Drift : ZERO drift typical 0.02%/°C (0.09°F); SPAN typical 0.005%/°C 0.0036°F).

Applications:

  • Process applications where a 4 to 20 mA signal is required
Other Details:

Model Description
651A-10 Temperature transmitter, Pt100 RTD input, range 32 to 212°F (0 to 100°C).
651A-20 Temperature transmitter, Pt100 RTD input, range 32 to 392°F (0 to 200°C).
651A-40 Temperature transmitter, Pt100 RTD input, range 32 to 752°F (0 to 400°C).
651TC-01 Temperature transmitter, type K thermocouple input, range 32 to 212°F (0 to 100°C).
651TC-02 Temperature transmitter, type K thermocouple input, range 32 to 392°F (0 to 200°C).
651TC-04 Temperature transmitter, type K thermocouple input, range 32 to 752°F (0 to 400°C).
651TC-06 Temperature transmitter, type K thermocouple input, range 32 to 1112°F (0 to 600°C).

Additional Information:

  • Item Code: Series-651

Temperature and Process Indicator

Rs 5,200 / Piece

Brand Dwyer Usa
Display Range 3-digits, red, green or blue display.
Resolution 1 Degree or 0.1 count.
Weight 2.3 oz (65 g).
Usage/Application Panel process indication
Display Type Digital
Model Series-TID
Condition New
Range -58 to 302 Degree F (thermistor); -999 to 999 counts (4 to 20 mA).
Input PTC/NTC thermistor or 4 to 20 mA.
Power Requirement 115 VAC, 230 VAC, 24 VAC/DC.
Accuracy 1%.
Front Panel Rating IP64. (NEMA 3R).
Temperature and Process Indicator

The SERIES TID displays temperature or a process value measured by a PTC or NTC thermistor or a 4 to 20 mA transmitter.

Features:

  • Thermistor or transmitter input models available
  • 3 digit bright LED

Applications:

  • Panel process indication
  • Refrigerators, walk in coolers
Other Details:

Model Description
TID-1110 Temperature/process indicator, °F, PTC thermistor input, 110 VAC.
TID-1120 Temperature/process indicator, °C, PTC thermistor input, 110 VAC.
TID-1210 Temperature/process indicator, °F, PTC thermistor input, 230 VAC.
TID-1220 Temperature/process indicator, °C, PTC thermistor input, 230 VAC.
TID-1410 Temperature/process indicator, °F, PTC thermistor input, 24 VAC/DC.
TID-1420 Temperature/process indicator, °C, PTC thermistor input, 24 VAC/DC.
TID-3100 Temperature/process indicator, 4-20 mA input, 110 VAC.
TID-3200 Temperature/process indicator, 4-20 mA input, 230 VAC.
TID-3400 Temperature/process indicator, 4-20 mA input, 24 VAC/DC.

Request
Callback

Additional Information:

  • Item Code: Series-TID

Thermocouple Limit Control

Rs 5,200 / Piece

Usage/Application Gas fired oven and burner control
Model Number Series-TSF
Power Consumption 4 VA.
Features FM approved temperature limiting control
Horsepower Rating 1 HP.
Storage Temperature -4 to 176 Degree F (-20 to 80 Degree C).
Brand DWYER USA
Front Panel Rating IP64 (NEMA 3R).
Accuracy +/-1% FS.
Display 3-digit, red, 1/2″ (12.7 mm) digits, plus sign.
Power Requirements 115 VAC, 230 VAC, 12 VAC/VDC or 24 VAC/VDC
Resolution 1 Degree
Ambient Temperature 32 to 150 Degree F (0 to 65 Degree C)
Weight 2.3 oz (65 g).
Thermocouple Limit Control


The SERIES TSF Thermocouple FM Approved Limit Control provides audible alarm status along with a relay output. Unit allows the user to easily select automatic or manual reset via a built in reset button on the front panel or an external contact

Features:

  • FM approved temperature limiting control
  • Integral and remote reset capabilities

Specification:

  • Probe Range : 32 to 999°F (0 to 700°C) for Type J thermocouple; 32 to 999°F (0 to 999°C) for type K or S thermocouples.
  • Input : Type J, K or S thermocouple.
  • Output : SPDT relay rated 16 A @ 240 VAC resistive.
  • Control Type : ON/OFF; manual/automatic reset.
  • Memory Backup : Nonvolatile memory.

Applications:

  • Gas fired oven and burner control
Other Details:

Model Description
TSF-4010 Thermocouple limit control, type J/K/S input, 110 V, °F.
TSF-4011 Thermocouple limit control, type J/K/S input, 110 V, °C.
TSF-4020 Thermocouple limit control, type J/K/S input, 230 V, °F.
TSF-4021 Thermocouple limit control, type J/K/S input, 230 V, °C.
TSF-4030 Thermocouple limit control, type J/K/S input, 12 VAC/VDC, °F.
TSF-4031 Thermocouple limit control, type J/K/S input, 12 VAC/VDC, °C.
TSF-4040 Thermocouple limit control, type J/K/S input, 24 VAC/VDC, °F.
TSF-4041 Thermocouple limit control, type J/K/S input, 24 VAC/VDC, °C.


Additional Information:

  • Item Code: Series-TSF

Wall Mount Temperature Sensor

Rs 5,000 / Piece

Material ABS plastic.
Weight 0.3 lb (136 g).
Temperature Range -40 to 140 Degree F (-40 to 60 Degree C)
Brand DWYER USA
Usage Building automation
Usage/Application Room temperature monitoring
Place Of Origin DELHI
Condition New
Model Series-TE-E-N
Housing Material ABS plastic.
Wall Mount Temperature Sensor


The SERIES TE-E/N Wall Mount Temperature Sensor provides a low cost temperature input for any building management system. With large vents in the housing for proper air flow, the sensor accurately measures the ambient temperature in hotel rooms or office buildings. Multiple mounting holes on the wall plate allow for mounting to numerous surfaces.

Features:

  • North American or European housing aesthetic options
  • Uniform look matches other Dwyer wall mount devices
  • Universal mounting plate meets various installation requirements
  • Accuracy : Thermistor temp sensor: ±0.22°C @ 25°C (±0.4°F @ 77°F); RTD temp sensor: DIN class B; ±0.3°C @ 0°C (±.54°F @ 32°F).

Applications:

  • Room temperature monitoring
  • Building automation
Other Details:

Model Description
TE-END-A EU Wall Mount Temperature Sensor, 10K Ohm Type III Sensor
TE-END-B EU Wall Mount Temperature Sensor, 10K Ohm Type II Sensor
TE-END-C EU Wall Mount Temperature Sensor, 3K Ohm Sensor
TE-END-D EU Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor
TE-END-E EU Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor
TE-END-F EU Wall Mount Temperature Sensor, 20K Ohm Sensor
TE-NND-A NA Wall Mount Temperature Sensor, 10K Ohm Type III Sensor
TE-NND-B NA Wall Mount Temperature Sensor, 10K Ohm Type II Sensor
TE-NND-C NA Wall Mount Temperature Sensor, 3K Ohm Sensor
TE-NND-D NA Wall Mount Temperature Sensor, Pt100 Ohm RTD Sensor
TE-NND-E NA Wall Mount Temperature Sensor, PT1K Ohm RTD Sensor
TE-NND-F NA Wall Mount Temperature Sensor, 20K Ohm Sensor

Additional Information:

  • Item Code: Series-TE-E-N

Weatherproof Immersion Temperature Transmitter

Rs 7,700 / Piece

Application Immersion temperature sensing in HVAC systems
Usage/Application ensing in HVAC systems
Application/Usage Immersion temperature sApplications
Brand DWYER USA
Model Number Series-TTW
Response Time 100 ms.
Condition New
Enclosure Material Painted aluminum housing
Temperature -40 to 212 Degree F (-40 to 100 Degree C).
Rating NEMA 4X (IP65).
Weatherproof Immersion Temperature Transmitter

The SERIES TTW Immersion Temperature Transmitter combines three popular products into a single package. Our TBU series head mounted temperature transmitter is factory mounted into our A-709 enclosure. A Pt100 RTD version of our TE series is wired to the transmitter, giving insertion lengths up to 18″. Each transmitter is factory programmed and calibrated to output a 4 to 20 mA signal proportional to the 32 to 212°F (0 to 100°C) temperature range.

Features:

  • Preset to 32 to 212°F (0 to 100°C) output range
  • USB port for easy output scale adjustment in the field


Specification:

Temperature Sensor:

  • Accuracy : ±3°F (±1.7°C).
  • Temperature Limits : Operating: -40 to 302°F (-40 to 150°C).
  • Sensor Curves : Pt100 RTD (TE Series Curve D).

Temperature Transmitter:

  • Input Range : -328 to 986°F (-200 to 530°C).
  • Output : Two-wire 4 to 20 mA.
  • Output Impedance : 600 Ω @ 24 VDC.
  • Power Requirements : 12 to 35 VDC.
  • Accuracy : ±0.2% FS.
  • Temperature Limits : -40 to 185°F (-40 to 85°C).

Applications:

  • Immersion temperature sApplications
  • Immersion temperature sensing in HVAC systems
  • ensing in HVAC systems

Additional Information:

  • Item Code: Series-TTW
 

1/4 DIN Temperature and Process Controller

Rs 5,500 / Piece

Brand Sensocon
Sensocon Differential Pressure Gauges

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
 

Leave a Reply

Your email address will not be published.