Series CX Compressor Pressure Switch Wholesaler Delhi India

Dwyer CX-11 Compressor Pressure Switch

 
 
Minimum Order Quantity50 Piece
BrandDwyer USA
Current Rating20 A @ 120 VAC, 12 A @ 240 VAC, 9.6 A @ 240 VAC (3 phase), 8.6 A @ 32 VDC, 3.1 A @ 120 VDC, 1.6 A @
Media TypeAir And Non-Combustible Compatible Gases.
Contact System TypeSPST
Electrical ConnectionScrew Terminals
Model Name/NumberDwyer CX-11 Compressor Pressure Switch
ColorBLACK
WeightCX-1: 0.78 lb (0.35 kg); CX-4: 1.03 lb (0.47 kg).
Mounting TypeSwitch Can Be Installed In Any Position.
Process Temperature140 DegreeF (60 DegreeC).
Minimum Order Quantity50 NOS
Country of OriginMade in India

Dwyer CX-11 Compressor Pressure Switch

  • Dwyer Instruments CX-11
  • Compressor Pressure Switch 1 Port, Range 25-100 PSIG
  • Order #: CX-11
  • Mfg #: CX-11

The Series CX Compressor Pressure Switches Are Designed With a 20 Amp Normally Closed SPST Switch For Direct Control of Pumps And Motors. The Set Point and Deadband Are Both Easily Adjustable Via Screw Terminals Inside The Cover. For Ease of Installation, The Switches Come With a 1/4″ Female NPT Process Connection Or The Optional 4-Port Connection Block On the CX-4 Models. Besides Making Installation Easier, One of the Other Ports can be used to install a pressure gage. Plus, these switches can be mounted in any orientation. These Units are Perfect For Regulating Tank Pressure on Small Air Compressors. The CX Series Switches come With an unloader valve, Which Prevents Compressors from Starting under load. They also come with An Auto/Off Disconnect Lever For Manually Cutting Off The Load. When The Lever Is In The Off Position, There Is a Test Button Inside The Housing That Can Be Pushed To Turn On The Load.
Availability: Ships in 7-8 Weeks
Product Highlights

  • 1 Port
  • Range 25-100 PSIG (1.7-6.9 Bar) Approx.
  • Adj. Deadband 20-30 PSIG (1.4-2.1 Bar)
  • Max. Pressure 129 PSIG (8.9 Bar)
 

Dwyer CX-41 Compressor Pressure Switch

 
 
Minimum Order Quantity24 Piece
BrandDWYER USA
Contact System TypeSPST
Electrical ConnectionScrew Terminals
Model Name/NumberDwyer CX-41
Weight1 lb
Country of OriginMade in India
Process Connection:1/4 NPT Female
Housing Material:Aluminum

Dwyer CX-41 Compressor Pressure Switch

CX-41

Dwyer Instruments Mechanical Pressure Switches,CX Series
Dwyer Instruments
Mechanical Pressure Switches, CX Series
Item# CX-41 – Compressor Pressure Switch Range 25-100 PSI Normally Closed 4 Port Block 1/4In NPT Female Connection
CX Series Information

The Series CX Compressor Pressure Switches are Designed With a 20 Amp Normally Closed SPST Switch For Direct Control Of Pumps And Motors. The Set Point And Deadband Are Both Easily Adjustable Via Screw Terminals Inside The Cover. For Ease Of Installation,The Switches Come With a 1/4″ Female NPT Process Connection Or The Optional 4???Port Connection Block On The CX???4 Models. Besides Making Installation Easier,One Of The Other Ports Can Be Used To Install a Pressure Gage. Plus, These Switches Can Be Mounted In Any Orientation.
  • Steel or Aluminum Connection
  • CE Approved

Specifications
  • Item Number:  CX-41
  • Brand:Dwyer Instruments
  • Item Category:Pressure Switches
  • Subcategory:Mechanical Pressure Switches
  • Series:CX
  • Contact Type:SPST
  • Housing Material:Aluminum
  • Process Connection:1/4 NPT Female
  • Electrical Connection:Screw Terminals
  • Pressure Range psig(Bar):25 to 100
  • Approvals:CE
  • Net Weight:1 lb  
 
 

SERIES CX COMPRESSOR PRESSURE SWITCH

 
 
Minimum Order Quantity50 Number
BrandDwyer USA
Current Rating20 A @ 120 VAC, 12 A @ 240 VAC, 9.6 A @ 240 VAC (3 phase), 8.6 A @ 32 VDC, 3.1 A @ 120 VDC, 1.6 A @
Media TypeGas
Contact System TypeSPST
Electrical ConnectionScrew Terminals
Model Name/NumberSeries CX Compressor Pressure Switch
ColorBLACK
WeightCX-1: 0.78 lb (0.35 kg); CX-4: 1.03 lb (0.47 kg).
Mounting TypeSwitch Can Be Installed In Any Position.
Process Temperature140 DegreeF (60 DegreeC).
Minimum Order Quantity50 NOS
Country of OriginMade in India
ServiceAir And Non-Combustible Compatible Gases.

SERIES CX COMPRESSOR PRESSURE SWITCH


Adjustable Set Point and Deadband, 20 Amp Rating

The Series CX Compressor Pressure Switches are Designed With a 20 Amp Normally Closed SPST Switch For Direct Cntrol of Pumps And Motors. The Set Point And Deadband Are Both Easily Adjustable Via Screw Trminals Inside The Cover. For Ease of Installation, The Switches Come With a 1/4″ Female NPT Process Connection Or The Optional 4-Port Connection Block On The CX-4 Models. Besides Making Installation Easier, One Of The Other Ports Can Be Used To Install a Pressure Gage. Plus, These Switches Cn Be Mounted In Any Orientation.

These units are perfect for regulating tank pressure on small air compressors. The CX series switches come with an unloader valve, which prevents compressors from starting under load. They also come with an auto/off disconnect lever for manually cutting off the load. When the lever is in the off position, there is a test button inside the housing that can be pushed to turn on the load.

Model Description

  • CX-11 Compressor Pressure Switch, 1 port, Range 25-100 psig (1.7-6.9 bar), approx. adj. deadband 20-30 psig (1.4-2.1 bar), max. pressure 129 psig (8.9 bar).
  • CX-12 Compressor Pressure Switch, 1 port, Range 35-150 psig (2.4-10.3 bar), approx. adj. deadband 30-40 psig (2.1-2.8 bar), max. pressure 179 psig (12.3 bar).
  • CX-13 Compressor Pressure Switch, 1 port, Range 50-175 psig (3.4-12.1 bar), approx. adj. deadband 35-55 psig (2.4-3.8 bar), max. pressure 204 psig (14.1 bar).
  • CX-41 Compressor Pressure Switch, 4 ports, Range 25-100 psig (1.7-6.9 bar), approx. adj. deadband 20-30 psig (1.4-2.1 bar), max. pressure 129 psig (8.9 bar).
  • CX-42 Compressor Pressure Switch, 4 ports, Range 35-150 psig (2.4-10.3 bar), approx. adj. deadband 30-40 psig (2.1-2.8 bar), max. pressure 179 psig (12.3 bar).
  • CX-43 Compressor Pressure Switch, 4 ports, Range 50-175 psig (3.4-12.1 bar), approx. adj. deadband 35-55 psig (2.4-3.8 bar), max. pressure 204 psig (14.1 bar).

SPECIFICATIONS

  • Service:Air And Non-Combustible Compatible Gases.
  • Wetted Materials:NBR (Nitrile-Butadiene) Rubber Diaphragm,Steel Connection (CX-1),Aluminum Alloy Connection (CX-4).
  • Temperature Limits:140°F (60°C).
  • Pressure Limits:See Ordering Page.
  • Enclosure Rating:General Purpose.
  • Repeatability:±5 psig (±0.3 bar).
  • Switch Type:2 each SPST SNAP Action,Normally Closed (NC).
  • Electrical Ratings:20 A @ 120 VAC,12 A @ 240 VAC,9.6 A @ 240 VAC (3 phase),8.6 A @ 32 VDC,3.1 A @ 120 VDC,1.6 A @ 240 VDC. 1.5 HP @ 120 VAC,2 HP @ 240 VAC,3 HP @ 240 VAC (3 phase),0.25 HP @ 32/120/240 VDC.
  • Electrical Connections:Screw Terminal.
  • Conduit Connection:7/8″ Hole For 1/2″ Conduit Hub (2 Places).
  • Process Connection:1/4″ female NPT (CX-4: 4 places).
  • Mounting Orientation:Switch Can Be Installed In Any Position.
  • Setpoint Adjustment:Internal Screws.
  • Weight:CX-1: 0.78 lb (0.35 kg); CX-4: 1.03 lb (0.47 kg).
  • Deadband:See Ordering page.Agency 
  • Approval:CE.
 
 

Dwyer CX-42 Compressor Pressure Switch

 
 
Minimum Order Quantity50 Piece
BrandDwyer USA
Current Rating20 A @ 120 VAC, 12 A @ 240 VAC, 9.6 A @ 240 VAC (3 phase), 8.6 A @ 32 VDC, 3.1 A @ 120 VDC, 1.6 A @
Media TypeAir And Non-Combustible Compatible Gases.
Contact System TypeSPST
Electrical ConnectionScrew Terminals
Model Name/NumberDwyer CX-42 Compressor Pressure Switch
ColorBLACK
WeightCX-1: 0.78 lb (0.35 kg); CX-4: 1.03 lb (0.47 kg).
Mounting TypeSwitch Can Be Installed In Any Position.
Process Temperature140 DegreeF (60 DegreeC).
Minimum Order Quantity50 NOS
Country of OriginMade in India


Dwyer CX-42 Compressor Pressure Switch

Adjustable Set Point and Deadband, 20 Amp Rating

The Series CX Compressor Pressure Switches are Designed With a 20 Amp Normally Closed SPST Switch For Direct Cntrol of Pumps And Motors. The Set Point And Deadband Are Both Easily Adjustable Via Screw Trminals Inside The Cover. For Ease of Installation, The Switches Come With a 1/4″ Female NPT Process Connection Or The Optional 4-Port Connection Block On The CX-4 Models. Besides Making Installation Easier, One Of The Other Ports Can Be Used To Install a Pressure Gage. Plus, These Switches Cn Be Mounted In Any Orientation.

These units are perfect for regulating tank pressure on small air compressors. The CX series switches come with an unloader valve, which prevents compressors from starting under load. They also come with an auto/off disconnect lever for manually cutting off the load. When the lever is in the off position, there is a test button inside the housing that can be pushed to turn on the load.

Model Description

  • CX-11 Compressor Pressure Switch, 1 port, Range 25-100 psig (1.7-6.9 bar), approx. adj. deadband 20-30 psig (1.4-2.1 bar), max. pressure 129 psig (8.9 bar).
  • CX-12 Compressor Pressure Switch, 1 port, Range 35-150 psig (2.4-10.3 bar), approx. adj. deadband 30-40 psig (2.1-2.8 bar), max. pressure 179 psig (12.3 bar).
  • CX-13 Compressor Pressure Switch, 1 port, Range 50-175 psig (3.4-12.1 bar), approx. adj. deadband 35-55 psig (2.4-3.8 bar), max. pressure 204 psig (14.1 bar).
  • CX-41 Compressor Pressure Switch, 4 ports, Range 25-100 psig (1.7-6.9 bar), approx. adj. deadband 20-30 psig (1.4-2.1 bar), max. pressure 129 psig (8.9 bar).
  • CX-42 Compressor Pressure Switch, 4 ports, Range 35-150 psig (2.4-10.3 bar), approx. adj. deadband 30-40 psig (2.1-2.8 bar), max. pressure 179 psig (12.3 bar).
  • CX-43 Compressor Pressure Switch, 4 ports, Range 50-175 psig (3.4-12.1 bar), approx. adj. deadband 35-55 psig (2.4-3.8 bar), max. pressure 204 psig (14.1 bar).


SPECIFICATIONS

  • Service:Air And Non-Combustible Compatible Gases.
  • Wetted Materials:NBR (Nitrile-Butadiene) Rubber Diaphragm,Steel Connection (CX-1),Aluminum Alloy Connection (CX-4).
  • Temperature Limits:140°F (60°C).
  • Pressure Limits:See Ordering Page.
  • Enclosure Rating:General Purpose.
  • Repeatability:±5 psig (±0.3 bar).
  • Switch Type:2 each SPST SNAP Action,Normally Closed (NC).
  • Electrical Ratings:20 A @ 120 VAC,12 A @ 240 VAC,9.6 A @ 240 VAC (3 phase),8.6 A @ 32 VDC,3.1 A @ 120 VDC,1.6 A @ 240 VDC. 1.5 HP @ 120 VAC,2 HP @ 240 VAC,3 HP @ 240 VAC (3 phase),0.25 HP @ 32/120/240 VDC.
  • Electrical Connections:Screw Terminal.
  • Conduit Connection:7/8″ Hole For 1/2″ Conduit Hub (2 Places).
  • Process Connection:1/4″ female NPT (CX-4: 4 places).
  • Mounting Orientation:Switch Can Be Installed In Any Position.
  • Setpoint Adjustment:Internal Screws.
  • Weight:CX-1: 0.78 lb (0.35 kg); CX-4: 1.03 lb (0.47 kg).
  • Deadband:See Ordering page.Agency 
  • Approval:CE.
 

Leave a Reply

Your email address will not be published.