Rs 60 / Piece

The Model A-350 Aspirator Bulb can be used to source pressure for calibration and leak checking tests. Simply squeeze the bulb after the tubing is connected to generate pressure. For applications such as our CO2 indicator, the aspirator bulb can be squeezed before inserting the tubing to draw a vacuum to pull the smoke or air from a duct or stack into the gage.

Features:

• Offers vacuum or positive pressure sourcing
• Compact and portable
• Most cost effective option
• Reference gage recommendation: Magnehelic 2010

Application:

• Test instrument calibration
• Pressure switch calibration
• Pressure transmitter calibration
• Smoke leak testing
• Calibration and leak check testing

Additional Information:

• Item Code: Model-A-350

Yes, I am interested

Rs 60 / Piece

The Model A-350 Aspirator Bulb can be used to source pressure for calibration and leak checking tests. Simply squeeze the bulb after the tubing is connected to generate pressure. For applications such as our CO2 indicator, the aspirator bulb can be squeezed before inserting the tubing to draw a vacuum to pull the smoke or air from a duct or stack into the gage.

Features:

• Offers vacuum or positive pressure sourcing
• Compact and portable
• Most cost effective option
• Reference gage recommendation: Magnehelic 2010

Application:

• Test instrument calibration
• Pressure switch calibration
• Pressure transmitter calibration
• Smoke leak testing
• Calibration and leak check testing

Additional Information:

• Item Code: Model-A-350

Yes, I am interested

Rs 65,000 / Piece

The MODEL A-396A Calibration Pump serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Includes volume adjuster enabling fine pressure control and bleed valve. Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Includes volume adjuster enabling fine pressure control and bleed valve. Generates pressures from a fraction of an inch . Includes barbed fitting, tee connector and three 36″ lengths of vinyl tubing.

Features:

• Offers wide pressure sourcing capability
• Compact and portable
• Integral relief valve for fine adjustment
• Reference gage recommendation

Application:

• Test instrument calibration
• Pressure switch calibration
• Pressure transmitter calibration

Additional Information:

• Item Code: Model-A-396A

Yes, I am interested

Rs 1,400 / Piece

These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.

You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.

Features:

• Minor Divisions of 1/10″ water column (or 2mm water column on metric units) are silkscreened in jet black on stark white scale for positive definition. Easy to read, even at a distance, they are acrylic coated for permanence. All models are furnished with one 3/4 ounce bottle of fluorescein green color concentrate with special wetting agent for W/M models, or 3/4 ounce bottle of red gage fluid for “D” units.
• Series 1221 Manometer – Our simplest, lowest cost basic U-gage. A dependable U-tube manometer that withstands hard use and provides accurate, high visibility readings. For use with water, mercury or red gage fluid. For mercury filled manometers, a scale clamp bar, Dwyer® Part No. A-363 (available as an extra for Series 1221 – and standard on Series 1222) is recommended. One pair of carrying plugs and a pair of non-kink vinyl tube connectors are included with each manometer.
• Series 1222 Manometer – All the features of the 1221 plus magnetic clips for mounting to any vertical steel surface, and clamp bar to insure against U-tube slipping. (Especially recommended for manometers used with mercury.) Both magnets are easily removed and replaced at the user’s convenience.
• Series 1223 Manometer – Our finest U-gage – for either portable or stationary use. Safety traps prevent loss of indicating fluid in case of accidental over-pressure. Tubing is permanently bonded to a molded, high impact acrylic plastic top that contains safety traps. Large magnetic clips and clamp bar are provided. Standard type “a” connections include two rapid shut-off type molded nylon tubing connections, two 3′ lengths of flexible Tygon® plastic tubing, and two 1/8″ pipe thread to tube adapters.

Applications:

• Duct static pressure
• Calibration labs
• Filter monitoring

Additional Information:

• Item Code: Series-1221-1222-1223

Yes, I am interested

Rs 9,500 / Piece

The Popular Model 477 is now available with 0.1% full-scale accuracy in the new Series 477A. The 477A contains a highly accurate differential pressure sensor that offers a 0.1% full-scale accuracy on air ranges from 20 in w.c. to 100 psid. Series 477A Handheld Digital Manometers are packed with features needed to make pressure measurement and recording faster, easier and more accurate than ever. Instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. A non-volatile memory function enables storage of up to 40 readings perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct.

The 477A is also ideal for maintenance personnel or technicians that require a highly accurate standard to check their instrumentation or equipment to ensure proper performance. When working in poorly lighted areas, just switch on the handy backlight feature. The manometer automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. Included is an audible alarm to warn of overpressure plus a visual alarm warning in case ambient noise levels are too high to hear the alarm. Audible alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.

Clear, concise operating instructions for all functions are printed on the rear of the rugged extruded aluminum case for quick reference. One-piece front membrane fully protects all keys from dust and moisture; wipes clean in seconds. Detailed written instructions, a wrist strap and 9 V alkaline battery are included.

Features:

• Measure positive, negative, or differential pressures
• Instant selection from up to nine english/metric units
• Stores 40 readings in memory for later reference
• Both audible and visual overpressure alarms
• Operates up to 100 hours on a single 9 volt battery
• New adjustable damping feature for averaging fluctuating reading

Specification:

• Wetted Materials : Consult factory.
• Accuracy : ±0.10% of full scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scale from 32 to 60 and 78 to 104°F (0 to 15.6 and 25.6 to 40°C).
• Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
• Process Connections : Two barbed connections for use with 1/8″ (3.18 mm) or 3/16″ (4.76 mterials : Consult factory.
  Accuracy : ±0.10% of full scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scale from 32 to 60 and 78 to 104°F (0 to 15.6 and 25.6 to 40°C).
  Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
  Process Connections : Two barbed connections for use with 1/8″ (3.18 mm) or 3/16″ (4.76 mm) I.D. tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only. Two compression fittings for use with 1/8″ (3.18 mm) I.D. x 1/4″ (6.35 mm) O.D. tubing for 477A-6 and 477A-7 only.m) I.D. tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only. Two compression fittings for use with 1/8″ (3.18 mm) I.D. x 1/4″ (6.35 mm) O.D. tubing for 477A-6 and 477A-7 only.

Additional Information:

• Item Code: Series-477A

Yes, I am interested

Rs 15,250/ Piece

The Model AQH-20 Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring the carbon dioxide concentration, air temperature, and humidity percentage in one device. A large backlit LCD display shows all three parameters simultaneously. The Model AQH-20 can display dew point or wet bulb temperatures in place of the ambient temperature. Minimum, maximum, and average readings are easily accessible through the function buttons. By pressing the hold key, the current values are held so that they can be recorded. An audible alarm warns the user that the current ambient conditions are becoming hazardous. The Model AQH-20 includes a hard carrying case and batteries.

Features:

• All-in-one unit for carbon dioxide, temperature, and humidity
• Large backlit LCD for visibility in dark areas
• User configurable alarms for audible indication of hazardous conditions

Specification:

• Ranges : CO2: 0 to 2000; Temperature: 14 to 140°F (-10 to 60°C); Relative Humidity: 0.0 to 99.9% RH.
• Accuracy : CO2: ±30 ppm ±5% of reading; Temperature: ±0.9°F (±0.6°C); Humidity: ±3% RH (10 to 90%), ±5% (0.0 to 9.9% or 90 to 99.9%).
• Resolution : CO2: 1 ppm; Temperature: 0.1°F (0.1°C); Humidity: 0.1% RH.
• Response Time : CO2: < 30 s.; Temperature: < 2 m.; Humidity: < 10 m.
• CO2 Sensor : Non-dispersive infrared.
• Power Requirements : (4) 1.5 V AA alkaline batteries, included, user replaceable.

Applications:

• Building commissioning
• Green house monitoring

Additional Information:

• Item Code: Model-AQH-20

Yes, I am interested

Rs 15,000 / Piece

The SERIES 490A Hydronic Differential Pressure Manometers are versatile, handheld, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A new feature added to the Series 490A is a field adjustable damping, which allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications.

Hydronic meter kit includes: (2) six foot high-pressure rated tubing with shut off valves, high pressure 3-way valve, 8 ft poly tubing for purges, hard travel case, handheld carrying strap, 1/16″ x 1 1/2″, 1/8″ x 3″ and 1/8″ x 1-1/2″ pairs of pressure probes, 90° Flare to 1/4″ NPT fittings, adjustable 8″ wrench, PTFE Tape, and magnetic protective rubber boot. NIST Calibration Certificate comes standard.

Dwyer Instruments, Inc. was recognized for excellence in product design in the 14th annual Dealer Design Awards Program sponsored by The Air Conditioning Heating & Refrigeration News magazine (The ACHR News). An independent panel of contractors acted as judges in the contest that had 81 entries. The company’s Series 490A-HKit Hydronic Differential Pressure Manometer was the Bronze Award Winner in the Electronic and Hand Tools category. The ACHR News is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries.

Features:

• Seven user-selectable English and metric units
• Stores up to 40 readings for later recall
• Backlight for use in dim areas
• Digital dampening for low pressure – high resolution logging accuracy
• Automatic resolution adjustment for finer control

Speciication:

• Service : Compatible gases & liquids.
• Wetted Materials : Without valve: 316L SS, -3V option: 316LSS, Buna-N, silicone, grease, PTFE, brass 360, copper, reinforced acetal copolymer.
• Accuracy : ±0.5% FS, 60 to 78°F (15.6 to 25.6°C); ±1.5% FS from 32 to 60°F and 78 to 104°F (0 to 15.6°C and 25.6 to 40°C)
• Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

• Chiller to coils for freeze protection
• Hydronic valve balancing
• Measure pressure drop across pumps
• Refrigerant pressure testing

Additional Information:

• Item Code: Series-490A

Yes, I am interested

Rs 21,000 / Piece

The Model LPCP Low Pressure Calibration Pump is a low air pressure source with the ability to easily adjust and stabilize. This hand pump possesses a pressure range of ± 5.8 psi; uses air as the media, and can adjust the pressure easily with great stability. The LPCP is made up of quick connectors for fast instrument connect and disconnect. The pump has a heat-insulator between the cover and pressure chamber to lessen the heat effect during the micro-pressure calibration. The adjusting resolution is up to 0.01 Pa (0.0001 mbar). These features make the LPCP ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.

Features:

• Portable
• Heat insulation and heat preservation, no negative side effects from temperature changes
• Open structure for convenient maintenance of the pumps
• Easy to operate: pressure is precisely set with a simple turn of the handle, allowing you to calibrate gages quickly and accurately
• Great seal performance: minimum leakage

Application:

• Instrument calibration
• Laboratories
• Production areas

Additional Information:

• Item Code: Model-LPCP

Yes, I am interested

Rs 22,500 / Piece

The Series BCHP Calibration Test Pump is able to generate pressure and vacuum for adjusting or calibrating pressure gages, transmitters, or switches. The pump is hand operated and has a pneumatic pressure range of -28 in Hg to 870 psi (-0.95 bar to 60 bar). Dual pressure ports allow two instruments to be connected to the pump without additional fittings. The Series BCHP can be used in laboratories and production areas. The fine adjustment valve on this pump ensures precise measurements.

Features:

• Dual pressure ports for ease of use
• Fine adjustment valve ensures precise measurements

Application:

• Instrument calibration
• Laboratories
• Production areas

Additional Information:

• Item Code: Series-BCHP

Yes, I am interested

Rs 18,500 / Piece

The Series PCHP Pneumatic Hand Pump comfortably sources pressure and vacuum to check calibration of gages, switches, transmitters, and recorders. The contoured cushion handles provide extra comfort while preventing the pump from sliding. The oversized check valve provides smooth operation throughout the output range. The dual o-rings on all pistons ensure zero leakage.

Request
Callback

Additional Information:

• Item Code: Series-PCHP

Yes, I am interested

Rs 12,500 / Piece

The SERIES 476A Single Pressure Digital Manometer can be used to measure low pressures from -20 to 20 in w.c. with ±1.5% FS accuracy. The SERIES 478A Differential Pressure Digital Manometer can be used to measure positive, negative, or differential pressures. Both units are constructed of an extruded aluminum case for exceptional durability.

Features:

• One button auto-zero function
• Auto power off function to conserve battery life
• Rugged extruded aluminum housing
• Instant selection of up to nine English/metric units
• ±0.5% FS accuracy

Specification:

• Service : Air and compatible gases.
• Wetted Materials : Consult factory.
• Accuracy : ±1.5% FS @ 72°F (22.2°C). Includes linearity and repeatability.
• Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.
• Process Connections : Barbed connection for use with 3/16″ or 1/4″ I.D. tubing.

Applications:

• Verify field instrumentation performance
• Adjust fuel mixture on combustion systems

Additional Information:

• Item Code: Series-476A

Yes, I am interested

Rs 2.25 Lakhs/ Piece

The Series SAH SMART Air Hood® Balancing Instrument is the most accurate and easy to operate air flow hood on the market. By using the included hood stand and wireless communications to the handheld, a single operator can balance a branch in less time than traditional balancing teams. Besides being lighter than most traditional capture hoods, the ergonomic design makes the Series SAH easy to maneuver, with less physical stress. The rugged polypropylene base hood features Quad Flow Design Technology for controlling air flow and minimizing back pressure, which yields superior measurement accuracy. The Wi-Fi direct communication gives reliable communication with a distance of up to 200 yards (183 m) between the hood and the handheld test instrument. The SMART Air Hood® Balancing Instrument includes the PredictAir™ Application Software which reduces the number of steps in the air flow balancing process using Predictive Balancing’s Express Balance mode. Predictive Balancing is a method of predicting the optimal flow set point for each register and the order in which they should be adjusted.

Specification:

• Volume Flow Ranges : Supply: 40 to 2000 CFM (68 to 3398 m3/h) (19 to 944 l/s); Exhaust: 80 to 2000 CFM (136 to 3398 m3/h) (38 to 944 l/s).
• Accuracy > 40 CFM : ±3% of reading ±7 CFM (11.9 m3/hr) (3.3 l/s)
• Power Requirements : 3.6 V NCR18650B MH12210 lithium ion battery, included, user replaceable or (4) 1.5 V AA alkaline batteries, not included, user replaceable.

Applications:

• Commissioning, testing, adjusting and balancing volumetric air flow from diffusers, grilles, and registers in HVAC systems

Features

• Patent pending Quad Flow Design Technology directs the circulating air patterns to provide a more even air flow that minimizes backpressure enabling accurate readings

• Patent pending Predictive Balancing is a process that guides the balancing technician on setting the optimal flow set point for each sequential terminal. With the PredictAir™ Application Software, the balancing process takes much less time than traditional air balancing methods
• The ergonomic design is much lighter and easier to work with than the existing bulky air hoods, providing greater maneuverability and less physical strain. One technician can complete the air balancing

• Wi-Fi direct wireless communication provides a range up to 200 yards (183 m)

Additional Information:

• Item Code: Series-SAH

Yes, I am interested

Rs 650 / Piece

The MODEL 485B Thermo-Hygrometer is a versatile, compact, handheld instrument for measuring percentage of relative humidity and temperature in °F or °C. Dew point and wet bulb temperatures are derived from the relative humidity and temperature measurements and are displayed on the LCD.

Features:

• Compatible with Dwyer AP1 thermo-anemometer and VP1 100 mm vane thermoanemometer probes (sold separately)
• Hold feature to freeze current readings on the display
• Stores up to 99 readings for future evaluation

Specification:

• Service : Humidity, temperature, wet bulb and dew point temperature detection in clean air.
• Accuracy Relative Humidity : ±2% FS over 10 to 90% @ 77°F (25°C).
• Range Temperature : -20 to 140°F (-28 to 60°C).
• Accuracy Temperature : ±0.54°F @ 72°F (±0.3°C @ 25°C).
• Power Requirements : 9 V alkaline battery, included, user replaceable.   

Applications:

• Building commissioning
• Pulp & paper

Additional Information:

• Item Code: Model-485B

Yes, I am interested

Rs 25,000 / Piece

THE MODEL UHH2 UNIVERSAL HANDHELD TEST INSTRUMENT provides the functionality and versatility of the Mobile Meter® Software App on a rugged IP68 Android® based handheld. Wireless anemometer, hygrometer, and pressure probes communicate to the handheld using Bluetooth SIG, Inc. wireless technology and can all be displayed simultaneously. Each UHH2 includes a UHH2 handheld base unit, UHH-BTG wireless mobile gateway, two USB charging cables, charging block, mini-screwdriver, user manual, and headphones.

Dwyer Instruments was recognized for excellence in product design in the 12th annual Dealer Design Awards Program sponsored by The Air Conditioning Heating & Refrigeration News magazine. An independent panel of contractors acted as judges in the contest that had 107 entries. The company’s Model UHH2 Universal Handheld Test Instrument was the Silver Award Winner in the Testing and Monitoring product category. The ACHR News is the leading trade magazine in the heating, ventilating, air conditioning, and refrigeration industries.

Features:

• Rugged weatherproof housing withstands 1.5 meter drop test
• Wireless measurement of pressure, air velocity, air flow, temperature, and humidity
• Share logged data directly from handheld over Wi-Fi, GSM or CDMA networks

Applications:

• Building commissioning
• Building balancing
• Testing HVAC equipment performance
•  

Additional Information:

• Item Code: Model-UHH

Yes, I am interested

Rs 4,500 / Piece

The Model VP2 Wireless 100 mm Vane Thermo-Anemometer Probe measures air velocity, air flow, humidity, and temperature when combined with the Model UHH2 Universal Handheld. By having a larger diameter, the rotating vane is able to measure velocities down to 50 fpm or 0.25 m/s. An arrow is molded into the vane housing to depict the flow direction.

Features:

• Allows for one handed operation for ladder use safety
• Stable 50′ (15 m) wireless range

Specification:

• Range : Air Velocity: 40 to 5000 fpm (0.2 to 25 m/s); Volumetric Air: 999,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C); Relative Humidity: 0 to 100% RH.
• Accuracy : Air Velocity: 0.25 to 10 m/s: ±1.5% of reading ±20 fpm (±0.1 m/s); 10 to 20 m/s: 1.5% of reading ±40 fpm (±0.2 m/s); 20 to 25 m/s: ±1.5% of reading ±60 fpm (±0.3 m/s). Temperature: ±0.54°F @ 77°F (±0.3°C @ 25°C). Relative Humidity: ±2% @ 77°F (25°C) (10 to 90% RH); ±4% (0 to 10% RH and 90 to 100%).
• Response Time : Air Velocity and Air Volume: 1 s; Temperature and Relative Humidity: 1.5 s.
• Power Requirements : 3.7 V YT562447 Lithium ion battery, installed functional, user replaceable. (Note: Intended to be operated with power cables less than 3 m in length). (Wireless Only).
• Handle Enclosure : Thermoplastic elastomer over polycarbonate.
• Supplied With : Wrist strap.

Applications:

• Building Commissioning
• Building HVAC Test and Balance

Additional Information:

• Item Code: Model-VP2

Yes, I am interested

Rs 26,500 / Piece

The Series AQTIA Air Quality Test Instruments combine the versatile Model UHH2 handheld base with various compatible probes and modules. The versatile combination provides a line of instruments capable of streamlining a technician’s everyday testing by combining all into one product and using Bluetooth SIG, Inc. wireless technology for ease of use.

Features: 

• Rugged IP68 housing withstands 1.5 meter drop test
• Wireless measurement of pressure, air velocity, air flow, temperature, and humidity

Applications:

• Building commissioning
• Building balancing
• Testing HVAC equipment performance

Additional Information:

• Item Code: Series-AQTIA

Yes, I am interested

Rs 5,000 / Piece

The Series 160E Ellipsoidal Tip Pitot Tube uses a precision crafted tip configuration, which allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Sliding depth indicators grip firmly to ensure uniform insertion when measuring traverses across ducts. Total and static pressure taps are 1/4″ (6 mm) and are permanently silver soldered to the connection block, making them leak-proof and durable.

Features: 

• Designed to meet ISO standard 3966 commonly required in UK and Europe
• Ellipsoidal tip design for improved accuracy
• 304SS construction adds strength, resists corrosion
• Adjustable depth indicators for fast, consistent traverses
• Alignment indicator helps keep tip parallel to flow

Applications:

• Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter

Additional Information:

• Item Code: Series-160E

Yes, I am interested

Rs 1,260 / Piece

Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 1/8″ nylon male NPT to barb fitting.

Features: 

• Used to monitor any compatible gas up to 15 in w.c.
• Durable plastic housing for long term use
• Economically priced

Applications:

• Combustion supply gas monitoring

Request
Callback

Additional Information:

• Item Code: Series-1213

Yes, I am interested

Rs 72,000 / Piece

The MODEL 1205B Handheld CO/CO 2 Gas Analyzer accurately measures the concentration of carbon monoxide (CO) and carbon dioxide (CO 2 ) in a duct or space and displays the measurement on a dual line backlit LCD. The unit’s memory stores up to 255 sets of readings that are logged manually or auto-logged with 1 to 10 minute intervals. Results can then be printed via an optional infrared printer.

Features:

• Displays carbon monoxide and carbon dioxide concentrations simultaneously
• Stores up to 255 sets of readings for future evaluation
• User configurable alarms

Application:

• Service and adjustment of boilers, ovens, and other combustion equipment

Specification:

• Accuracy : CO: ±5 ppm<100 ppm; ±5%>100 ppm; ±10%>1000 ppm. CO2: ±20 ppm<400 ppm; ±5%<4000 ppm; ±10%>4000 ppm.

Additional Information:

• Item Code: Model-1205B

Yes, I am interested

Rs 75,000 / Piece

The Versatile Model 1207A Handheld Flue Gas Combustion Analyzer makes adjusting boilers for optimum efficiency quicker and easier. With the large LCD display, users can monitor four parameters simultaneously and change the parameters shown using the rotary dial selection switch. For extra protection, the analyzer comes standard with a protective boot and magnetic back. In order to track the measurements, the 1207A can store up to 255 time stamped test sets in memory and can output measurements to a serial printer.

The 1207A comes preprogrammed for Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets. Along with analyzing combustion measurements, the analyzer can be used as a CO/CO2 indicator, pressure manometer, or thermocouple thermometer.

Features: 

• Displays 4 configurable parameters simultaneously
• Stores up to 255 time stamped test sets for future evaluation

Specification:

• Range : O2: 0 to 21%, CO: 0 to 2000 PPM (4000 PPM Max for 15 minutes), CO2: 0 to 30%, Temp. (Flue and net): 32 to 1112°F (0 to 600°C), Efficiency: 0 to 99.9%, Excess Air: 0 to 250%.
• Accuracy : O2: ±0.2%, CO: ±10 PPM < 100 PPM else ±5% of reading, CO2: ±0.3% reading, Temp. (Flue and net): ±2°C ±0.3% reading, Efficiency: ±1% reading, Excess Air: ±0.2%.
• Resolution : O2: 0.1%, CO: 1 PPM, CO2: 0.1%, Temp. (Flue and net): 0.1°F/C, Efficiency: 0.1%, Excess Air: 0.1%.
• Power Requirements : (8) AA alkaline batteries, installed functional, user replaceable, (4) AA NiMH batteries, included, user replaceable (charger included) or optional power adapter.
• Pre-Programmed Fuels : Natural Gas, Light Oil, Propane, Butane, LPG, and Wood Pellets.
• Probe : 11.8″ (300 mm) length x 0.25″ (6 mm) diameter with 7.8″ (200 mm) stainless steel shaft.

Applications:

• Service and adjustment of boilers, ovens, and other combustion equipment

Additional Information:

• Item Code: Model-1207A

Yes, I am interested

Rs 65,000 / Piece

The Model DW-DATAPAD Handheld Portable Data Viewer configures and reads data from up to 500 DW-USB data loggers and utilizes a 2.8″ full color TFT touch screen display. Data can be displayed as a trend graph or a statistical summary, and can also be transferred to a computer using the provided cable and Windows® based software. Model DW-DATAPAD features a rechargeable lithium battery and has an average life of 5 to 8 hours under constant use.

Features:

• 2.8″ full color TFT touch screen simplifies navigation through configuration menus
• Rechargeable lithium battery has a 5 to 8 hour life when constantly used

Specification:

• Data Recording Capacity : Internal flash memory, greater than 8.5 million readings.
• Power Requirements : CA374170 lithium ion rechargeable battery, installed functional, factory replaceable.
• Interface : Touch screen and single front-panel push-button power switch.
• Connections : 1 USB type A socket (top of unit) for data logger connection. 1 micro-USB (bottom of unit) for connection of unit to PC via supplied USB cable.
• Compatible Data Loggers : DW-USB-1, DW-USB-1-HT, DW-USB-1-LCD, DWUSB- 2, DW-USB-2-HA, DW-USB-2-HA-LCD, DW-USB-2-LCD, DW-USB-6, DWUSB- 6-LCD, and DW-USB-LITE.

Applications:

• Calibration labs
• Environmental chambers
• Pharmaceutical plants
• Storage warehouses

Additional Information:

• Item Code: Model-DW-DATAPAD

Yes, I am interested

Rs 18,500 / Piece

The Series HCHP Hydraulic Calibration Hand Pump utilizes a fully adjustable stroke control that allows for quick priming, easy pumping and fast pressure generation up to 10000 psi (700 bar). The ergonomically engineered handles provide extra comfort, while the triple filtration system ensures pump operation in spite of dirty conditions. The shatterproof reservoir and stainless steel construction guarantee leak free operation. The Series HCHP has oversized check valves to provide smooth controlled operation.

Additional Information:

• Item Code: Series-HCHP

Yes, I am interested

Rs 18,000 / Piece

The Series CHP Pneumatic Hand Pump is the most dependable and rugged pump for applications up to 100 psi or 28.8″ Hg Vacuum. The durable Acetal plastic and anodized aluminum construction prevents body heat transfer, resulting in drift-free, accurate readings. The Series CHP is equipped with oversized check valves in order to provide smooth and controlled operation. Dual O-Rings on all pistons ensure the pump to be leak-free. The unit includes a 2 foot long hose, 1/8″ female NPT gage fitting, and 1/8″ NPT pipe plug. An optional hose kit is available so that a tee is not required when connecting a sensor and a calibrator. The Series CHP is ideal for checking calibration of pressure or vacuum gages, switches, or transmitters.

Additional Information:

• Item Code: Series-CHP

Yes, I am interested

Rs 4,750 / Piece

The Series 160S “S” Type Stainless Steel Pitot Tube is designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Total and static pressure tubes are precisely aligned and welded together every 6 inches for maximum accuracy, strength, and long term durability. Permanent mount (PM) models include a 1″ welded stainless steel sleeve and adjustable compression fitting with 1″ MNPT mounting threads.

Applications:

• Monitor or control air velocity or air flow in particulate laden air strea

Additional Information:

• Item Code: Series-160S

Yes, I am interested

Rs 4,500 / Piece

The SERIES 160F Straight Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. The straight design allows for easy insertion into ducts through grills and pressure taps, as well as aids in positioning in hard to reach locations where a hook style Pitot tube may not allow access.

Features:

• Straight design allows for easy insertion into ducts
• Permanent stamped insertion depth graduations facilitate accurate positioning
• Alignment indicator helps keep tip parallel to flow

Applications:

• Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter where hook style Pitot tubes don’t allow access

Additional Information:

• Item Code: Series-160F

Yes, I am interested

Rs 5,500 / Piece

The Model 166T Telescoping Pitot Tube is a unique air flow sensor which can quickly and easily be adjusted for any duct insertion length from 11.5 to 36 inches (29.2 to 91.4 cm). Now, this single compact unit can replace up to five conventional fixed length Pitot tubes. For even greater convenience, it is securely protected by a custom fitted polyethylene carrying case. Telescoping sections lock in place as they are extended, enabling use of the handle grip to gage proper alignment of the tip within the airstream. Stainless steel construction resists corrosion. Hemispherical tip has 1.0 flow coefficient, is 1/8″

Features:

• Adjustable length can replace up to 5 fixed length Pitot tubes
• Stainless steel construction resists corrosion
• 1.8″ diameter hemispherical tip has 1.0 flow coefficient

Applications:

• Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter where varying lengths are needed

Additional Information:

• Item Code: Model-166T

Yes, I am interested

Rs 20,000 / Piece

Series AP1, Wired Thermo-Anemometer Probes for the Model 471B.

Specification:

• Range : Air Velocity: 0 to 6000 FPM (0 to 30 m/s); Volumetric Air: 999,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C).
• Accuracy : Air Velocity: ±3% FS within temperature range of 40 to 90°F (4 to 32°C); Temperature: ±0.5°F (±0.28°C).

Additional Information:

• Item Code: Series-AP1

Yes, I am interested

Rs 65,000 / Piece

The MODEL 471B Thermo-Anemometer Test Instrument is a versatile dual function unit that quickly and easily measures air velocity or volumetric flow as well as air temperature in imperial or metric units. A stainless steel probe is included, which has a comfortable hand grip and etched insertion depth marks. The extruded aluminum housing fully protects electronics, yet is lightweight and comfortable to hold.

Features:

• Compatible with Dwyer RP1 thermo-hygrometer and VP1 100 mm vane thermo-anemometer probes (sold separately)
• High contrast and backlit LCD for visibility in any condition
• Able to store up to 99 readings
• Integral sliding cover protects probe sensors when not in use
• Built-in volumetric air flow calculations

Specification:

• Service : Air velocity and temperature of clean, dry air.
• Temperature Limits : Process Air Velocity: -20 to 212°F (-29 to 100°C); Process Temperature: -40 to 212°F (-40 to 100°C); Ambient: 5 to 125°F (-15 to 51°C).
• Range Air Velocity : 0 to 6000 FPM (0 to 30 m/s). -TAB option: 50 to 3900 FPM (0.25 to 20m/s).
• Accuracy Air Velocity : ±3% FS within temperature range of 40 to 90°F (4 to 32°C). -TAB option: ±5% of reading, not less than ±1.6 FPM (0.5 m).
• Range Temperature : -40 to 212°F (-40 to 100°C).
• Accuracy Temperature : ±0.5°F (±0.28°C) from 32 to 122°F (0 to 50 °C); ±1.5°F (±0.83°C) from -40°F to 32°F (-40 to 0°C) & 122 to 212°F (50 to 100°C).
• Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

• Duct traverses
• HVAC inspections
• Testing and balancing

Additional Information:

• Item Code: Model-471B

Yes, I am interested

Rs 14,500 / Piece

Model RP1, Wired Thermo-Hygrometer Probe for the Model 485B.

Specification:

• Accuracy : RH: ±2% @ 25°C (10 to 90% RH); ±4% (0 to 10, 90 to 100% RH); Temperature: ±0.54 @ 77°F (±0.3 @ 25°C).

Additional Information:

• Item Code: Model-RP1

Yes, I am interested

Rs 4,500 / Piece

Features:

• Compatible with Dwyer AP1 thermo-anemometer and RP1 thermo-hygrometer wired probes (sold separately)
• Included 100 mm vane probe is able to measure air velocity, volumetric air flow, temperature, and humidity
• High contrast and backlit LCD for visibility in any condition
• Able to store up to 99 readings for later evaluation

Specification:

• Range : Air Velocity: 40 to 5000 fpm (0.2 to 25 m/s); Volumetric Air Flow: 19,999 in selected flow units; Temperature: -20 to 212°F (-29 to 100°C); Relative Humidity: 0 to 100% RH.
• Accuracy : Air Velocity: ±1.5% of reading ±20 fpm (±0.1 m/s) [0.25 to 10 m/s]; ±1.5% of reading ±40 fpm (±0.2 m/s) [10 to 20 m/s]; ±1.5% of reading ±60 fpm (±0.3 m/s) [20 to 25 m/s]; Temperature: ±0.54°F @ 77°F (±0.3°C @ 25°C); Relative Humidity: ±2% @ 77°F (25°C) [10 to 90% RH]; ±4% [0 to 10, 90 to 100% RH].
• Response Time : Air Velocity: 1 s; Volumetric Air Flow: 1 s; Temperature: 1.5 s; Relative Humidity: 1.5 s.
• Power Requirements : 9 V alkaline battery, installed non-functional, user replaceable.

Applications:

• Residential balancing
• HVAC inspections

Additional Information:

• Item Code: Model-473B

Yes, I am interested

Rs 15,000 / Piece

The Series DW-WIFI Wireless Wi-Fi Data Logger measures and records up to 1,000,000 temperature and/or humidity readings and shares the data with any PC or server on the same Wi-Fi network. If the Wi-Fi connection is lost, the sensor will continue to store any records until it can regain communication with the network. The downloadable Windows® based software allows users to set high/low alarms, sampling rate, and the temperature scale.

Features:

• Continues to record values even if Wi-Fi connection is lost
• Able to record up to 1,000,000 data points, which can be downloaded to a PC
• Large LCD allows users to view data directly from unit

Specification:

• Memory Size : 1,000,000 readings; 500,000 each for DW-WIFI-TH(-HA).
• Sampling Mode : Continuous recording.
• Power Requirements : 3.7 V lithium ion battery, installed functional, factory replaceable (cable for charging included).
• Alarms : Programmable high/low.
• Probe Length : DW-WIFI-TP: 11.8″ (30 cm); DW-WIFI-TC: 59″ (150 cm).

Applications:

• Environment monitoring
• Weather monitoring
• Building/site monitoring

Additional Information:

• Item Code: Series-DW-WIFI

Yes, I am interested