Dwyer DM-1000 Digimag Differential Pressure Gauge

Dwyer USA DM-1103 DigiMag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
BrandDwyer USA
ModelDM-1103
Measuring Range0-0.5″ w.c.
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1103 DigiMag Digital Pressure Gage Dwyer USA DM-1103 DigiMag Digital Pressure Gage With Range of 0 to 0.5 in w.c. The Dwyer DM-1103 DigiMag Digital Pressure Gage has a range from 0-0.5″ w.c. and with a resolution of 0.001 w.c. The DigiMag® Series DM-1000 Digital Differential Pressure and Flow Gagesâ€?? widows: 2;â€?? background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer Dm-1104 Digimag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Model NumberDM-1104
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and reputability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass Filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Process Connections1/8″ (3 mm) I.D. tubing.
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE
Current Consumption5 mA maximum


The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1109 DigiMag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Model NumberDM-1109
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W).
Measuring Range(mm)0-50 MMWC
BrandDwyer USA
ApplicationIndustrial, Laboratory
Scale RangeRange 0-15″ w.c.
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Electrical ConnectionsRemovable terminal block for 16 to 26 AWG
Enclosure RatingNEMA 4X (IP66).
Agency ApprovalsCE

Dwyer USA DM-1109 DigiMag Digital Pressure Gage With Range of 0 to 15 in w.c. The Dwyer DM-1109 Digi Mag Digital Pressure Gage has a range from 0-15″ w.c. and with a resolution of 0.010 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur.  Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. Digi Mag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1110 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-25″ w.c.
Model No.DM-1110
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1110 Digi Mag Digital Pressure Gage With Range of 0 to 25 in w.c. The Dwyer DM-1110 Digi Mag Digital Pressure Gage has a range from 0-25″ w.c. and with a resolution of 0.010 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The Digi Mag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. Digi Mag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1111 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-50″ w.c.
BrandDwyer USA
Model No.DM-1111
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1111 Digi Mag Digital Pressure Gage With Range of 0 to 50 in w.c. The Dwyer DM-1111 Digi Mag Digital Pressure Gage has a range from 0-50″ w.c. and with a resolution of 0.020 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1112 Digi Mag Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-100″ w.c.
Model No.DM-1112
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1112 Digi Mag Digital Pressure Gage With Range of 0 to 100 in w.c. The Dwyer DM-1112 Digi Mag Digital Pressure Gage has a range from 0-100″ w.c. and with a resolution of 0.100 w.c. The Digi Mag® Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The Digi Mag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 Digi Mag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Series DM-1000 DigiMag Digital Differential Pressure Gages

 
Minimum Order Quantity1 Number
Measuring Range(mm)DM-1000
Model No.Dwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Display: 4-digit LCD (digits0.60″ H x 0.33″ W)
Power Requirements9V battery or external power supply 9-24 VDC. Battery included but not connected
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Series DM-1000 DigiMag Digital Differential Pressure and Flow Gages

 

ModelDescription
DM-1102DigiMag® differential digital pressure gage, range 0-0.25″ w.c.
DM-1103DigiMag® differential digital pressure gage, range 0-0.5″ w.c.
DM-1104DigiMag® differential digital pressure gage, range 0-1″ w.c.
DM-1105DigiMag® differential digital pressure gage, range 0-2″ w.c.
DM-1107DigiMag® differential digital pressure gage, range 0-5″ w.c.
DM-1108DigiMag® differential digital pressure gage, range 0-10″ w.c.
DM-1109DigiMag® differential digital pressure gage, range 0-15″ w.c.
DM-1110DigiMag® differential digital pressure gage, range 0-25″ w.c.
DM-1111DigiMag® differential digital pressure gage, range 0-50″ w.c.
DM-1112DigiMag® differential digital pressure gage, range 0-100″ w.c.
DM-1122DigiMag® differential digital pressure gage, range 0.25-0-0.25″ w.c.
DM-1123DigiMag® differential digital pressure gage, range 0.5-0-0.5″ w.c.
DM-1124DigiMag® differential digital pressure gage, range 1-0-1″ w.c.
DM-1125DigiMag® differential digital pressure gage, range 2-0-2″ w.c.
DM-1127DigiMag® differential digital pressure gage, range 5-0-5″ w.c.
DM-1128DigiMag® differential digital pressure gage, range 10-0-10″ w.c.

DWYER USA DPG-200 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)14.70-0 PSI
BrandDwyer USA
Model No.DPG-200
Accuracy0.25% F.S. +-1 least significant digit.
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables).
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%.
Power Consumption0.8 W max

DWYER USA DPG-200 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 14.70-0 The SERIES DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

Product Applications:
  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

 

DPG-200    
  • Digital pressure gage, selectable engineering units: -14.70-0 psig, -1.033 kg/cm², -1.013 bar, -29.93″ Hg, -33.94 ft w.c., -33.06 ft seawater @ 4°C, -101.4 kPa, -235.2 oz/in², -407.3″ w.c., -1013 mbar, -1034 cm w.c., -760.7 mm Hg.
 

DWYER USA DPG-202 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)15.00 PSI
BrandDwyer USA
Model No.DPG-202
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Output Signal4 to 20 mA

 

DWYER USA DPG-202 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 15 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-202

Digital pressure gage, selectable engineering units: 15.00 psig, 1.055 kg/cm², 1.034 bar, 30.54″ Hg, 34.61 ft w.c., 33.73 ft seawater @ 4°C, 103.4 kPa, 240 oz/in², 415.2″ w.c., 1034 mbar, 1055 cm w.c., 775.7 mm Hg.

Product Applications:

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

DWYER USA DPG-203 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
Measuring Range(mm)30 psig
Model No.DPG-203
Accuracy0.25% F.S. +-1 least significant digit.
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%

 

DWYER USA DPG-203 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 30 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-203

Digital pressure gage, selectable engineering units: 30.00 psig, 2.109 kg/cm², 2.069 bar, 61.08″ Hg, 69.21 ft w.c., 67.45 ft seawater @ 4°C, 206.9 kPa, 480 oz/in², 830.4″ w.c., 2069 mbar, 2109 cm w.c., 1551 mm Hg.

Product Applications:

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control

DWYER USA DPG-204 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Measuring Range(mm)50 psig
BrandDwyer USA
Model No.DPG-204
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS.
Temperature Limits0 to 158 frh deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%

DWYER USA DPG-204 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 50 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-204

Digital pressure gage, selectable engineering units: 50.00 psig, 3.515 kg/cm², 3.448 bar, 101.8″ Hg, 115.4 ft w.c., 112.4 ft seawater @ 4°C, 344.8 kPa, 800 oz/in², 1384″ w.c., 3448 mbar, 3515 cm w.c., 2586 mm Hg.

Product Applications

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-205 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits).
BrandDwyer USA
Measuring Range(mm)100 psig
Model No.DPG-205
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Power Consumption0.8 W max.

DWYER USA DPG-205 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 100 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-205

Digital pressure gage, selectable engineering units: 100.0 psig, 7.03 kg/cm², 6.895 bar, 203.6″ Hg, 230.7 ft w.c., 224.8 ft seawater @ 4°C, 689.5 kPa, 1600 oz/in², 2768″ w.c., 6895 mbar, 7031 cm w.c., 5172 mm Hg.

Product Applications

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-206 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)200 psig
BrandDwyer USA
Model No.DPG-206
Accuracy0.25% F.S. +-1 least significant digit. (Includes linearity, hysteresis, repeat-ability)
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%.
Output Signal4 to 20 mA
Power Consumption0.8 W max

DWYER USA DPG-206 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 200 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-206

Digital pressure gage, selectable engineering units: 200.0 psig, 14.06 kg/cm², 13.79 bar, 407.2″ Hg, 461.4 ft w.c., 449.7 ft seawater @ 4°C, 1379 kPa, 3200 oz/in², 5536″ w.c.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-207 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
Measuring Range(mm)300 psig
BrandDwyer USA
Model No.DPG-207
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g).
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Temperature Limits0 to 158 deg F (0 to 70 deg C).
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA

DWYER USA DPG-207 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 300 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-207

Digital pressure gage, selectable engineering units: 300.0 psig, 21.09 kg/cm², 20.69 bar, 610.8″ Hg, 692.1 ft w.c., 674.5 ft seawater @ 4°C, 2069 kPa, 4800 oz/in², 8304″ w.c

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-208 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits).
Measuring Range(mm)500 psig
BrandDwyer USA
Model No.DPG-208
Accuracy0.25% F.S. +-1 least significant digit. (Includes linearity, hysteresis, repeatability)
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables).
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA
Power Consumption0.8 W max

Series DPG-208 Digital Pressure Gage, 500 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-208

Digital pressure gage, selectable engineering units: 500.0 psig, 35.15 kg/cm², 34.48 bar, 1018″ Hg, 1154 ft w.c., 1124 ft seawater @ 4°C, 3448 kPa, 8000 oz/in².

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-209 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-209
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Consumption0.8 W max
Output Signal4 to 20 mA

DWYER USA DPG-209 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 1000 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-209

Digital pressure gage, selectable engineering units: 1000 psig, 70.3 kg/cm², 68.98 bar, 2036″ Hg, 2307 ft w.c., 2248 ft seawater @ 4°C, 6895 kPa..

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

Dwyer Usa Dpg-210 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-210
Measuring Range3000 psig
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS.
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Requirements12 to 24 VAC +-20% 50 to 400 HZ, 12 to 24 VDC +-20%
Output Signal4 to 20 mA
loop Resistance600 ohms maximum
Power Consumption0.8 W max

DWYER USA DPG-210 Digital Pressure Gage Series DPG-200 Digital Pressure Gage, 3000 psig 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-210

Digital pressure gage, selectable engineering units: 3000 psig, 210.9 kg/cm², 206.9 bar, 6108″ Hg, 6921 ft w.c., 6745 ft seawater @ 4°C.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

DWYER USA DPG-211 Digital Pressure Gage

 
Minimum Order Quantity1 Number
Display Type4 digit (.425 H x .234 W digits)
BrandDwyer USA
ModelDPG-211
Accuracy0.25% F.S. +-1 least significant digit
Weight8.84 oz (275 g)
Size3.00″ OD x 1.90 deep (not including cables)
Wetted MaterialsType 316L SS
Temperature Limits0 to 158 deg F (0 to 70 deg C)
Process Connection1/4″ male NPT
Power Consumption0.8 W max.

DWYER USA DPG-211 Digital Pressure Gage Digital pressure gage, selectable engineering units: 5000 psig, 351.5 kg/cm², 344.8 bar. 3-in-1: Gage, Transmitter & Switch The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.

DPG-211

Digital pressure gage, selectable engineering units: 5000 psig, 351.5 kg/cm², 344.8 bar.

  • Level Control
  • Pump Control
  • Process Control
  • Compressor Control
 

Dwyer USA DM-1102 DigiMag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0-0.25″ w.c.
BrandDwyer USA
Model No.DM-1102
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1102 DigiMag Differential Pressure Gauge DigiMag Differential Digital Pressure Gage,Range 0-0.25″WC The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1105 DigiMag Differential Pressure & Flow Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0-2″ w.c.
Model No.DM-1105
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer USA DM-1105 DigiMag Differential Pressure & Flow Gauge (0-2″w.c.) The Dwyer DM-1105 DigiMag Digital Pressure Gage has a range from 0-0.2″ w.c. and with a resolution of 0.001 w.c. The DigiMag® Series DM-1000 Digital Differential Pressure and Flow Gages” widows: 2;” background-position: initial initial; background-repeat: initial initial;monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag® Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag® Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag® Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in w.c. and 2% accuracy down to the very low range of 1 inch to 0.25 in w.c. DigiMag® Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted
 

Dwyer Usa Dm-1107 Digimag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-5″ w.c
BrandDwyer USA
Model No.DM-1107
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic.
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum.
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE

Dwyer Usa Dm-1107 Digimag Differential Pressure Gauge Dwyer Instruments DM-1107 DigiMag? Differential Digital Pressure Gage,0-5″w.c The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.
 

Dwyer USA DM-1108 DigiMag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0-10″ w.c.
Model No.DM-1108
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below.
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Weight:1.18 lb (535 g)
Agency ApprovalsCE


Dwyer USA DM-1108 DigiMag Differential Pressure Gauge Dwyer Instruments DM-1108 DigiMag Differential Digital Pressure Gage,Range 0-10″WC The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1123 Digi Mag Differential Pressure Gauge

 
Minimum Order Quantity1 Number
BrandDwyer USA
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)0.5-0-0.5″ w.c.
Model No.DM-1123
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1123 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1123 Digi Mag Differential Pressure Gauge 0.50-0-0.50 in H20 The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. Digi Mag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1122 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 0.25-0-0.25″ w.c.
Model No.DM-1122
ModelDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Process Connections1/8″ (3 mm) I.D. tubing.
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1122 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1122 Digi Mag Differential Pressure Gauge Range 0.25-0-0.25″ w.c.0 
The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. Digi Mag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1124 DigiMag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 1-0-1″ w.c.
Model No.DM-1124
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Pastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year.
Current Consumption5 mA maximum
Process Connections1/8″ (3 mm) I.D. tubing
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1124 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1124 DM-1124 DigiMag® differential digital pressure gage, range 1-0-1″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1125 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
BrandDwyer USA
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 2-0-2″ w.c.
Model No.DM-1125
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Agency ApprovalsCE
Enclosure RatingNEMA 4X (IP66)
Process Connections1/8″ (3 mm) I.D. tubing


Dwyer USA DM-1125 Digi Mag Differential Pressure Gauge 
Dwyer Instruments DM-1125 DM-1124 DigiMag® differential digital pressure gage, range 2-0-2″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The Digi Mag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1128 DigiMag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Display Type4-digit LCD (digits: 0.60″ H x 0.33″ W)
Measuring Range(mm)Range 10-0-10″ w.c.
Model No.DM-1128
BrandDwyer USA
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g)
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)
Agency ApprovalsCE


Dwyer USA DM-1128 DigiMag Differential Pressure Gauge Dwyer Instruments DM-1128 DM-1124 DigiMag® differential digital pressure gage, range 10-0-10″ w.c. The DigiMag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Dwyer USA DM-1127 Digi Mag Differential Pressure Gauge

 
 
Minimum Order Quantity1 Number
Measuring Range(mm)5-0-5″ w.c.
BrandDwyer USA
Model No.DM-1127
Accuracy+-1% F.S. including linearity, hysteresis and repeatability; +-2% F.S. for ranges 1 in w.c. and below
Weight1.18 lb (535 g).
Size5″ (127 mm) O.D. front face
Housing MaterialsGlass filled Plastic
Temperature Limits0 to 140 deg F (-18 to 60 deg C)
Compensated Temperature Limits32 to 122 deg F (0 to 50 deg C)
Long Term Stability+-1% F.S. per year
Display: 4-digit LCD0.60″ H x 0.33″ W)
Current Consumption5 mA maximum
Enclosure RatingNEMA 4X (IP66)


Dwyer USA DM-1127 Digi Mag Differential Pressure Gauge Dwyer Instruments DM-1127 DM-1124 DigiMag® differential digital pressure gage, range 5-0-5″ w.c. The Digi Mag Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. The DigiMag Digital Gages are more versatile than analog gages with their ability to be field-programmed to select pressure, air velocity or flow operation depending on model. The DigiMag Digital Gages have an added feature for filter applications where a set point can be input where the display will blink when the filter is dirty, alerting the user that a maintenance action needs to occur. Programming the Series DM-1000 is easy using the menu key to access 4 simplified menus which provide access to, depending on model: security level; engineering units; K-factor for use with various Pitot tubes and flow sensors circular or rectangular duct size for volumetric flow operation; filter set point; view peak and valley process readings; digital damping for smoothing erratic process applications; display update to conserve battery life; zero and span field calibration. The Series DM-1000 DigiMag Digital Differential Pressure and Air Flow Gages possess a full-scale accuracy of 1% on ranges down to 2 in H2O and 2% accuracy down to the very low range of 1 inch to 0.25 in H2O. DigiMag Digital Differential Pressure Gages offer power versatility by working with 9-24 VDC line power or simply 9V battery power. If using line power and connecting the 9V battery, the battery will act as a back-up if line power is lost or interrupted.

Leave a Reply

Your email address will not be published. Required fields are marked *