Capsuhelic Differential Pressure Gauge | |
|---|---|
Rs 5,401/ Piece | |
| Brand | Aerosense,Galaxy,Omicron,Sensocon,Dwyer . |
Series 4000 Capsuhelic® Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic® Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Product Applications:
Specifications Service:
Feature::
Additional Information:
| |
1700 Low Differential Pressure Designed Switch | |
|---|---|
Rs 12,500 / Piece | |
| Brand | DWYER USA . |
| Model | 1700 . |
For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz.
Additional Information:
| |
EDPS Differential Pressure Switch | |
|---|---|
Rs 4,000 / Piece | |
| Brand | DWYER USA . |
| Model | EDPS . |
For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz.
Additional Information:
| |
AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Model | AT1ADPS ATEX . |
The ATEX approved Series AT1ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 16 in w.c. (4000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing set point status on adjustment knob.
Additional Information:
| |
BDPA Adjustable Differential Pressure Alarm | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Model | BDPA . |
The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.
The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDCVAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.
The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.
Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483).
Additional Information:
| |
1800 Low Differential Pressure Switch | |
|---|---|
Rs 25,000/ Piece | |
| Brand | DWYER USA . |
| Model | 1800 . |
Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.
CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483).
Additional Information:
| |
AT21823 ATEX Approved 1823 Differential Pressure Switch | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Model | AT21823 . |
Essential for industrial environments, the ATEX approved Series AT21823 combines small size with 2% repeatability. Set point adjustment inside the switch allows for set point settings across 9 ranges from the low of .07 in w.c. to a maximum 85 in w.c. differential pressure. Series AT21823 flame-proof ATEX enclosures are available in aluminum and are ideal for low pressure hazardous area applications. Various housing options such as an overpressure relief valve or external setpoint adjustment knob are available. External setpoint knob allows adjustment without opening the enclosure
Additional Information:
| |
1900 Compact Low Differential Pressure Switches | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Model | 1900 . |
Our most popular series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved. CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Product Applications : Clogged filter detection,Air conditioning refrigeration coil icing detection; defrost cycle intiation,Variable air volume controller Etc.
Additional Information:
| |
AT11910 ATEX Approved 1910 Differential Pressure Switch | |
|---|---|
Rs 25,000/ Piece | |
| Brand | DWYER USA . |
| Model | AT11910 . |
Our most popular Differential Pressure Switch is now available in an flame-proof ATEX approved package in the AT11910 Series. This pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. For air and non-combustible compatible gases, the AT11910 Series switches have set points from 0.07 to 20 in w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside the switch enclosure. Series AT11910 ATEX enclosures are available in aluminum enclosures and ideal for low pressure, hazardous area applications. Important notes for installation Cables must be fitted through 12″ NPT cable gland or ATEX conduit (not supplied with instrument). Additional Information:
| |
MDA Miniature Adjustable Pressure Switch | |
|---|---|
Rs 25,000/ Piece | |
| Brand | DWYER USA . |
| Model | MDA . |
Sense differential pressure with the Series MDA Miniature Adjustable Pressure Switch. The switch features field adjustable set point and gold inlay contacts. Air or other compatible fluids can be used on the “high side”. The lightweight and compact size make the MDA ideal for any application with space constraints. Applications include industrial, HVAC, pump and motor control, medical, automotive, pools and spas.
Additional Information:
| |
Mark II Molded Plastic Manometer | |
|---|---|
Rs 12,500 / Piece | |
| Brand | DWYER USA . |
| Measuring Range | 0-1” . |
| Model | Mark II . |
Dwyer® Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Additional Information:
| |
424 Durablock Inclined Manometer | |
|---|---|
Rs 9,500 / Piece | |
| Brand | DWYER USA . |
| Model | Dwyer No 424 . |
Dwyer® No. 424 inclined-vertical manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20″ to provide ample multiplication of indicating fluid movement in this critical lower part of the range.
Additional Information:
| |
1235 Flex-Tube Well Manometer | |
|---|---|
Rs 8,500/ Piece | |
| Brand | DWYER USA . |
| Model | 1235 . |
Dwyer Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Overpressure safety traps assure protection against loss of fluid. Heavy pure white acrylic plastic scales have sharp black silk screened figures and graduations sealed with clear mylar coating. Scales are adjusted with quick-acting positive mechanism. Heavy heat treated aluminum back plates have durable gray hammerloid finish. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5″ Hg (68″ w.c.).
Additional Information:
| |
Series 616KD Differential Pressure Transmitter | |
|---|---|
Rs 12,500 / Piece | |
| Brand | DWYER USA . |
| Model | Series 616KD . |
The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration.
Mounting is simple with integral mounting holes on the 616KD that are inherent to the molded housing. The 616KD has the expanded capability to be mounted on a 35 mm DIN rail either via its side or back integral DIN rail clips. The Series 616KD has easy-to-wire open screw terminals at the top of the housing. An optional protective cap snaps directly to housing to cover terminals.
The One-Touch® family of Differential Pressure Transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume and filter monitoring. Available models include ranges from 1 in w.c. to 20 in w.c. depending on series.
Additional Information:
| |
Model DTG Digital Tire Pressure Gage | |
|---|---|
Rs 25,000/ Piece | |
| Brand | DWYER USA . |
| Measuring Range | Model DTG-01 . |
| Model | Model DTG-01 . |
The Model DTG-01 Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. With ±1% FS accuracy, the DTG reads psi, bar and kPa with the ease of one-button operation. A protective rubber casing stands up against rough handling and short drops.
Additional Information:
| |
Series 628CR Pressure Transmitter | |
|---|---|
Rs 12,500 / Piece | |
| Brand | DWYER USA . |
| Model | Series 628CR . |
Accurate to ±1% of full scale, The Series 628CR Pressure Transmitter, contains a low cost ceramic sensor housed in a compact, rugged, NEMA 4X stainless steel body. Ideal for the budget conscious OEM’s that require high levels of performance, reliability and stability at an unbeatable price. The 628CR housing is small and lightweight for optimum compatibility with OEM systems. The design allows for a variety of pressure ranges from 30 to 500 psi and optional electrical connections allowing you to select the right transmitter for your application.
Additional Information:
| |
Series 626 & 628 Industrial Pressure Transmitter | |
|---|---|
Rs 9,500/ Piece | |
| Brand | DWYER USA . |
| Model | Series 626 & 628 . |
The Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing. The Dwyer Series 628 Pressure Transmitters are ideal for OEM’s with 1% full scale accuracy sensors. The transmitter is also available in the general purpose stainless steel housing and the cast aluminum conduit housing. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.
Additional Information:
| |
Series 673 Pressure Transmitter | |
|---|---|
Rs 12,500 / Piece | |
| Brand | DWYER USA . |
| Model | Series 673 . |
The low cost Series 673 Pressure Transmitter is a fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC equipment, industrial engines and compressor control.
Additional Information:
| |
Magnehelic Gauge SS Plate Front Cover | |
|---|---|
Rs 350 / Piece | |
| Brand | Integerated Engineers India . |
| Material | Steel . |
| Connection | New . |
We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.
Specifications:
Available in different specifications ranging from:
Uses:
Additional Information:
| |
Series TPT Industrial Pressure Transmitter | |
|---|---|
| Brand | DWYER USA . |
| Model | Series TPT . |
The Series TPT Pressure Transmitter is the ideal choice for all types of industrial pressure applications. Machined from a solid piece of 17-4PH SS, the TPT provides a leak proof, all metal system without O-rings, welds, or organics exposed to the pressure media. Its design allows for stable operation when subject to shock and vibration. Utilizing piezoresistive technology with digital compensation and temperature correction, the TPT gives high accuracy and stability under harsh environmental conditions. Available in ratiometric and 4 to 20 mA outputs.
Additional Information:
| |
Series 682 Industrial Pressure Transmitter | |
|---|---|
| Brand | DWYER USA . |
| Model | Series 682 . |
The Series 682 Industrial Pressure Transmitter is designed to withstand environmental effects such as shock, vibration, temperature, and EMIRFI. The electronics and capacitive sensor are packaged in a welded stainless steel housing and meets NEMA 4 (IP65) protection ratings. The transmitter features external zero and span adjustments and reverse polarity protection. The Series 682 delivers high performance in tough applications such as off road equipment, hydraulic systems, compressor control, industrial engines, or industrial refrigeration.
Additional Information:
| |
Series 672 Low Pressure Transducer | |
|---|---|
| Application | Panel Meter, PLC, Switches, Pumps . |
The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10″ w.c. up to 400″ w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.
Additional Information:
| |
Series 634ES Adjustable Range Pressure Transmitter | |
|---|---|
| Brand | DWYER USA . |
| Model | Series 634ES . |
Series 634ES Transmitters sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal. Positive pressure can be measured within an accuracy of ±0.5% of span. The Series 634ES uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge. Convenient 2-wire operation simplifies installation. Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish. Enclosure is designed to meet NEMA 4X requirements. Additional Information:
| |
Series 681 Sanitary Pressure Transmitter | |
|---|---|
| Brand | DWYER USA . |
| Model | Series 681 . |
The Series 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight. Additional Information:
| |
Series BYDS Bypass Damper Switch | |
|---|---|
| Brand | DWYER USA . |
| Model | BYDS . |
The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical onoff pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application. CONTROL OPERATION The BYDS Bypass Damper Switch is designed for use with a three wire floating point damper actuator used to control the static pressure on zone control systems requiring motorized bypass dampers. A bypass damper, bypasses air from the discharge air side of the HVAC unit back in the return air side. The air flow is modulated in order to maintain a constant static pressure in the system as individual zone dampers open and close. The static pressure control is equipped with solid-state switching which dramatically increases the life of the control. On an increase in static pressure the BYDS will send 24 volts out and start the actuator to drive open. When the static pressure reaches set-point the actuator will stop. After a ten second delay the actuator will start to drive the damper closed if there has not been an increase in static pressure. A green LED indicates when the damper is in the open position or being driven open. A 24 VAC transformer is required to power the BYDS control and damper actuator. The unit includes tubing and two static pressure probes Additional Information:
| |
TRI2 Tridicator Gage | |
|---|---|
Rs 25,000/ Piece | |
| Brand | DWYER USA . |
| Model | Series TRI2 . |
The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank. Additional Information:
| |
SGP Stainless Steel Low Pressure Schaeffer Gage | |
|---|---|
Rs 10,780/ Piece | |
| Brand | DWYER USA . |
| Model | Series SGP . |
The Series SGP Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGP gages are designed with 304 SS housings, a 316L SS chamber and a 316 SS diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available.
Applications : Chemical,Fertilizer,PowerPharmaceutical,Petrochemical
Additional Information:
| |
SGO Stainless Steel Schaeffer Gage | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Model | Series SGO . |
The Series SGO Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGO gages are designed with 304 SS housing, a 316L SS chamber and PTFE coated diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges are available from full vacuum, compound to 300 psi. Product Applications: : Chemical,Refinery,Fertilizer Petrochemical, Power Pharmaceutical Pulp and PaperCement.
Additional Information:
| |
SGF Stainless Steel Low Pressure Gage | |
|---|---|
Rs 4,000 / Piece | |
| Brand | DWYER USA . |
| Model | Series SGX SGF . |
The Series SGXSGF Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGXSGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 212°F (100°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle.
Additional Information:
| |
Series WDG Weatherproof Digital Pressure Gage | |
|---|---|
Rs 25,000 / Piece | |
| Brand | DWYER USA . |
| Measuring Range(mm) | 4-digit backlit display . |
| Model No. | Series WDG . |
The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.
Additional Information:
| |
Series DPGA & DPGW Digital Pressure Gauge | |
|---|---|
Rs 12,500/ Piece | |
| Brand | DWYER USA . |
| Measuring Range(mm) | 0-50 MM WC . |
| Model No. | Series DPGA . |
The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.
The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.
Product Applications : Ideal for checking process pressure at system startup Additional Information:
| |
Series DPGAB Digital Pressure Gauge | |
|---|---|
Rs 28,562/ Piece | |
| Brand | DWYER USA . |
| Measuring Range(mm) | Range 0 to 200 psig . |
| Model No. | Series DPGWBDPGAB . |
The Series DPGWB DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The DPGWB stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGWBDPGAB come with a protective rubber boot to protect against short drops and rough handling.
Product Applications : Ideal for checking line pressures at system startup
Additional Information:
| |
Series DPG Digital Pressure Gage | |
|---|---|
Rs 25,000 / Piece | |
| Brand | DWYER USA . |
| Model | Series DPG . |
Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages.
Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.
Additional Information:
| |
Series DCGII Digital Calibration Pressure Gage | |
|---|---|
Rs 25,000 / Piece | |
| DWYER USA | Series DCGII . |
The Series DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability.
Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing.
Additional Information:
| |
Model HTG Handheld Digital Tire Pressure Gage | |
|---|---|
Rs 35,000 / Piece | |
| Brand | DWYER USA . |
| Model | Model HTG-01 . |
The Model HTG-01 Handheld Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. Its lightweight, handheld design makes it portable and user friendly with its one button operation. A backlit 14″ LCD display and illuminated tip ensures easy visibility in low light. The Series HTG also displays three different units of psi, bar and kPa with the push of a button.
Additional Information:
| |
Series DSGT Digital Indicating Transmitter | |
|---|---|
Rs 35,000 / Piece | |
| Brand | DWYER USA . |
| Model | Series DSGT . |
Series DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches. The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update dampening rates.
Additional Information:
| |
250-AF Inclined Manometer Air Filter Gage | |
|---|---|
| Brand | DWYER USA . |
| Connection | New . |
| Condition | New . |
250-AF Inclined Manometer Air Filter Gage Dwyer® Durablock® Series 250-AF Gages are precision machined 1″ thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002″ to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by “O” rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions. Economy Models 451-AF and 452-AF are similar to 250 Series except they are not equipped with over pressure traps. Two A-324 14″ compression fittings are included with each Gage. Bodies are of 58″ thick acrylic and scales are mirror polished, epoxy coated aluminum. Additional Information:
| |
300 Durablock Solid Plastic Stationary Gage | |
|---|---|
Rs 9,000/ Piece | |
| Brand | dwyer usa . |
Dwyer® solid plastic stationary gages – or draft gages – are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrications of acrylic instruments. Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing.
Additional Information:
| |
Series UGI Utility Gage | |
|---|---|
Rs 25,000 / Piece | |
| Brand | DWYER USA . |
| Model | DWYER USA . |
1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators.
Additional Information:
| |
Series UGJ Utility Gage | |
|---|---|
Rs 25,000 / Piece | |
| Brand | DWYER USA . |
| Model | DWYER USA . |
The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.
Additional Information:
| |
Series SG5 Contractor Gage |
|
|---|---|
Rs 4,000 / Piece |
|
| Brand |
DWYER USA . |
| Model |
Series SG5 . |
|
The Series SG5 Contractor Gages are ideally manufactured for contractors because of their large dial and compact design. Since the gages are lightweight and slim, they are easy to transport. The large 4.5″ scale makes them simple to read. The Series SG5 gages possess psi scales with 1% full-scale accuracy. The gages are made with a stainless steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). These qualities make the SG5 series perfect for contractors and industrial applications. A wide offering of ranges are available from full vacuum to 300 psi.
Additional Information:
| |
|
|
|
