Series 629 Wet Differential Pressure Transmitter Wholesaler India DELHI

Series 629 Wet/Wet Differential Pressure Transmitter

 
Minimum Order Quantity1 Number
Usage/ApplicationIndustrial
Model Name/NumberSeries 629
BrandDwyer
Protection TypeIP54
Measuring Range20-200Pa to 200-4000Pa
Operating Temperature-20 deg C to +60 deg C

Series 629 Wet/Wet Differential Pressure Transmitter

0.5% Accuracy, NEMA 4X Enclosure

  • This Series Is No Longer Available, See Series 629C For The Suggested Replacement.

 

The SERIES 629 Differential Pressure Transmitter Monitors Differential Pressure Of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block, zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction.


FEATURES/BENEFITS

  • Versatile, high-accuracy device for liquid or gas supports designs requiring more precise measurements in support of application
  •  Minimum components provide excellent response and reliability
  •  Span and zero controls reduce installation and service time
  •  Terminal block reduces wiring difficulties saving installation time
  •  Optional LED indicator provides local status to identify operational conditions.
  • Optional 3-way valve manifold supports higher line pressures or simplifying removal of transmitter without interrupting process


APPLICATIONS

  • Flow Elements 
  • Heat Exchangers
  • Filters
  • Coils 
  • Chiller 
  • Pumps


Specifications

  • Service:Compatible Gases and Liquids.
  • Wetted Materials:Without valve: 316, 316L SS. Additional wetted parts with 3-way valve option: Buna-N, silicone grease, PTFE, brass 360, copper, reinforced acetal copolymer.
  • Accuracy:±0.5% F.S. (includes linearity, hysteresis, and repeatability).
  • Temperature Limits:0 to 200°F (-18 to 93°C).
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C).
  • Pressure Limits:See Ordering page.
  • Thermal Effect:0.02%/°F (0.036%/°C) includes zero and span.
  • Power Requirements:13 to 30 VDC.
  • Output Signal:4 to 20 mA. Optional 0 to 5 or 0 to 10 VDC.
  • Response Time:50 ms.
  • Loop Resistance:0 to 1300 Ω maximum for current output. For voltage outputs, minimum load resistance: 2000 Ω.
  • Electrical Connections:Terminal block; 1/2″ female NPT conduit.
  • Process Connection:1/4″ female NPT.
  • Enclosure Rating:Designed to meet NEMA 4X (IP66).
  • Mounting Orientation:Mount in any position.
  • Weight:10.1 oz (286 g).
  • Agency Approvals:CE.
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale.

Dwyer 629C-02-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationMonitor Differential Pressure Across,Flow Elements,Heat Exchangers,Filters,Pumps,Coils,Chiller
Model Name/NumberDwyer 629C-02-CH-P2-E5-S1
BrandDwyer USA
Voltage4 to 20 mA. Optional 0-5 or 0-10 VDC
Accuracy+-0.5% F.S. (includes linearity, hysteresis, and repeatability)
Operating Range10 PSID
Product Weight10.1 oz (286 g)
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

  • Model: 629C  
  • Order No: 629C-02-CH-P2-E5-S1

Monitors Differential Pressure of Air and Compatible Gases and liquids with 0.5% accuracy with a working pressure 20 psi and an over pressure 100 psi.

DESCRIPTION


Dwyer 629C Series Offers


Features

  • Versatile, high accuracy device for liquid or gas supports designs requiring more precise measurements in support of application
  • Minimum components provide excellent response and reliability
  • Zero control reduces installation and service time
  • Terminal block reduces wiring difficulties saving installation time

New Features

  • Powered by either DC or AC– take advantage of most readily available power source reducing installation costs.
  • Optional LCD does not need a separate power supply – lowers installed cost.
  • Selectable voltage ranges on voltage units – provides flexible choice for changing designs or matching inputs for controller equipment being used to monitor and control. Additionally minimizes number of stocked units.
  • Push button zero (versus trim pot adjustment)– easier more simpler zeroing provides easy install and calibration reducing installation time and possibility of operator error.
  • Rugged NEMA 4X enclosure even with optional LCD permits use in many environments.
  • Locking Hex nut connection prevents inadvertent stripping out of process connection.

Functional Specifications

  • Service: Compatible gases and liquids
  • Wetted Materials: Without valve: 316, 316L SS. Additional wetted parts with valve option: Buna-N, silicone grease, PTFE, brass 360, copper, and reinforced copolymer
  • Accuracy: ±0.5% F.S. (includes linearity, hysteresis, and repeatability)
  • ±1% FS/year.
  • Compensated Temperature Limits: 0 to 175°F (-18 to 79°C)
  • Thermal Effect: 0.04%/°F (0.072%/°C) includes zero and span
  • Output Signal: 4 to 20 mA. Optional 0-5 or 0-10 VDC
  • Response Time: 400 msec
  • Loop Resistance: Current output 0-1250 Ω maximum, Rmax = 50(Vps-10, minimum load resistance: 5 kΩ
  • Current Consumption: 28 mA (max).
  • Electrical Connections: Terminal block; 1/2″ female NPT conduit
  • Process Connection: 1/4″ female NPT
  • Optional 4-1/2 digit LCD field attachable display
  • Mounting Orientation: Not position sensitive

General Specifications


  • Power Requirements: 13 to 30 VDC
  • Weight: 10.1 oz (286 g)

Applications


  • Monitor Differential Pressure Across:
  • Flow Elements
  • Heat Exchangers
  • Filters
  • Pumps
  • Coils
  • Chiller
  • Calibration Lab

INCLUDED
What’s Included With The Dwyer 629C Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R2-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-R2-P1-E5-S1
  • Description–Wet/wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors And 20’Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R2-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India


Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Model-629C-02-R2-P1-E5-S1
Description-Wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors and 20′ Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X IP66 construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S.includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S3-3
  • Description-Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 PSID,Working Pressure 50 PSI,Over Pressure 250 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India


Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S1-3
  • Description – Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 psid,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-CH-P2-E5-S3
  • Description-Wet/Wet Differential Pressure Transmitter,Range 10 PSID,Conduit Housing,1/4″ NPT Female Process Connections,0-10 V output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-03-CH-P2-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S1
  • Description–Wet/Wet Differential Pressure Transmitter, Range 25 PSID, Working Pressure 50 PSI, Over Pressure 120 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-02-R6-P1-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range10 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of OriginMade in India

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

  • Model – 629C-02-R6-P1-E5-S1
  • Description–Wet/Wet Differential Pressure Transmitter, Range 10 PSID, Working Pressure 20 PSI, Over Pressure 100 PSI With Remote Sensors And 20′ Armored Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Series 629C Wet/Wet Differential Pressure Transmitter

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberSeries 629C
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity,hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Country of OriginMade in India

Series 629C Wet/Wet Differential pressure Transmitter

0.5% Accuracy, NEMA 4X (IP66) Enclosure

The Series 629C Wet/Wet Differential Pressure Transmitter monitors Differential Pressure of Air and Compatible gases and liquids with 0.5% accuracy.The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.
The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20” lengths.Installation is much simpler, reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Model Description

  • 629C-02-CH-P2-E5-S1-Range 10 psid,Working Pressure 20 psi,Over Pressure 100 psi.
  • 629C-02-CH-P2-E5-S1-3-With 3-Way Valve Package, Range 10 psid,conduit housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA
  • 629C-02-CH-P2-E5-S3-Range 10 Psid,Conduit Housing, 1/4″ NPT Female Process Connections,0-10 V output.
  • 629C-02-CH-P2-E5-S3-3-with 3-way valve package, range 10 psid,working pressure 50 psi,over Pressure 250 psi.
  • 629C-02-R2-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” shielded cable.
  • 629C-02-R6-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” armored cable.
  • 629C-03-CH-P2-E5-S1-Range 25 psid,working pressure 50 psi,over pressure 120 psi.
  • 629C-03-CH-P2-E5-S1-3-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA
  • 629C-03-CH-P2-E5-S3-Range 25 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
  • 629C-03-CH-P2-E5-S3-3-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.
  • 629C-03-R1-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.
  • 629C-03-R5-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.
  • 629C-04-CH-P2-E5-S1-Range 50 psid,working pressure 100 psi,over pressure 250 psi.
  • 629C-04-CH-P2-E5-S1-3-With 3-way valve package, range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA
  • 629C-04-CH-P2-E5-S3-Range 50 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
  • 629C-04-CH-P2-E5-S3-3-With 3-way valve package, range 50 psid, working pressure 100 psi,over pressure 250 psi.
  • 629C-05-CH-P2-E5-S1-Range 100 psid,working pressure 200 psi,over pressure 500 psi.
  • 629C-05-CH-P2-E5-S1-3-With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA
  • 629C-05-CH-P2-E5-S3-Range 100 psid, conduit housing,1/4″ NPT female process connections,0-10 V output.
  • 629C-05-CH-P2-E5-S3-3-With 3-way valve package, range 100 psid,working pressure 200 psi,over pressure 500 psi.
  • 629C-05-R1-P1-E5-S3-Range 100 psid,working pressure 200 psi, over pressure 500 psi with remote sensors and 10” shielded cable.
  • 629C-05-R5-P1-E5-S3-Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.
 

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S1-3
  • Description-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 

Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S3
  • Description-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected)
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-CH-P2-E5-S3-3
  • Description-Range 25 psid,conduit housing,1/4″ NPT female process connections,0-10 V output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model –  629C-04-CH-P2-E5-S3-3
  • Description-With 3-Way Valve Package,Range 50 PSID,Working Pressure 100 PSI,Over Pressure 250 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S3 
  • Description-Range 50 psid,conduit housing,1/4″ NPT Female Process Connections,0-10 V Output..

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S1-3
  • Description-With 3-way valve package,range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-04-CH-P2-E5-S1
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range50 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Country of OriginMade in India

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

  • Model – 629C-04-CH-P2-E5-S1
  • Description-Range 50 psid,working pressure 100 psi,over pressure 250 psi.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-R1-P1-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-R1-P1-E5-S3
  • Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-R5-P1-E5-S3
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India


Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-R5-P1-E5-S3 
  • Description – Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-R1-P1-E5-S3
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-R1-P1-E5-S3
  • Description–With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S3-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India


Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S3-3
  • Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Working Pressure 200 PSI,Over Pressure 500 PSI.


The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale


Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material


Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6


Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S3
  • Description–Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Conduit Housing, 1/4″ NPT Female Process Connections, 0-10 V Output.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters
 

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S1-3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range100 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S1-3
  • Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

 
Minimum Order Quantity1 Number
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/NumberDwyer 629C-05-CH-P2-E5-S1
BrandDWYER USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection TypeDwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Country of OriginMade in India

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

  • Model – 629C-05-CH-P2-E5-S1 
  • Description – Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Working Pressure 200 PSI, Over Pressure 500 PSI.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

 
Minimum Order Quantity1 Pack
Usage/ApplicationFlow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number629C-03-R5-P1-E5-S3
BrandDwyer USA
Voltage2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range25 PSID
Product Weight629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection TypeDwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage13 to 30 VDC
Supply Voltage Limits13 to 30 VDC
Part TypeDwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of OriginMade in India

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

  • Model – 629C-03-R5-P1-E5-S3
  • Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

  • Service:Compatible Gases and Liquids
  • Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
  • Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
  • Temperature Limits:0 to 200°F (-18 to 93°C)
  • Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
  • Pressure Limits:See Ordering Page
  • Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
  • Power Requirements:13 to 30 VDC
  • Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
  • Response Time:50 ms
  • Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
  • Electrical Connections:Terminal Block;1/2″ female NPT Conduit
  • Process Connection:1/4″ Female NPT
  • Enclosure Rating:Designed to Meet NEMA 4X (IP66)
  • Mounting Orientation:Mount in any position
  • Weight:10.1 oz 286 g
  • Agency Approvals:CE
  • NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

  • Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
  • Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
  • Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
  • Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
  • Optional LCD indicator provides local status to identify operational condition
  • Remote sensor option reduces installation labor and material

Options

  • -3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters
 

Leave a Reply

Your email address will not be published. Required fields are marked *