Category: Cooling and Condenser Coil Manufacture From Delhi

Cooling and Condenser Coil Manufacture From Delhi

Cooling Coil

 
UsageIndustrial Use
BrandETI
Voltage220 V
Liquid Flow Rate4.12-15.2 L/s
Plate Thickness20 SWG
Tube Diameter (Inch)3/8,1/2,5/8 inch
Maximum Working Pressure4.0 Mpa

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

 

Features:

  • Sturdiness

  • Dimensionally accurate

  • Corrosion resistance

 

Coils:

  • They are manufactured from annealed & seamless copper tubes

 

Fins:

  • Aluminium used for fins are super slit fins. Copper tubes are hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

 

Header:

  • M. S. Seamless pipe or copper pipe of heavy gauge

 

Casing

  • End covers, top & bottom channels are manufactured of 16 gauge of g. I sheets for protection & long life

  • Venting & draining system: the coils require only one drain & one vent

  • The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

 

Testing:

  • All coils are tested at 300 psig pneumatic pressures under water for leakage test.

 

Size:

  • Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

 

Our range includes:

  • Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant

  • Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut

  • This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray

  • Electronic Coils. Industrial Coils

  • Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost

  • We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils

  • We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day

  • Procured from genuine vendors, we use good quality of raw material in the production of our gamut

  • The raw material includes 1 1/2′ C class and ISI duty ERW tubes

  • These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

 

Heating Ventilation Air Conditioning Coil

 
Usage/ApplicationDecorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall
BrandEnviro Tech Industrial Products
Surface TreatmentMill Finish
Air volume170m3/h~12600m3/h
Heat2700W~18900W
Operating Voltage230 VAC


In order to meet huge market demands, we are involved in presenting huge array of Heating Ventilation Air Conditioning Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature. We are leading Heating Ventilation Air Conditioning Coil manufacturer in DELHI.


Features:

  • Superlative performance
  • Competitive prices
  • Best grade materials

Thermal Oil Coil

 
Usage/ApplicationAhu
Size48” X 60”
MaterialStainless Steel
BrandEnviro Tech Industrial Products
Surface TreatmentPolished
TechniqueERW


We hold the proficiency to offer a variety of Oil Thermal Coil that are extensively used in downstream of boiler bank to preheat the feed water. These products are always water tube type that has different types of tubes for different applications. Our industrious professionals precisely engineer these products as per the necessities of the clients adhering to strict quality standard.

Evaporator Coil

 
ApplicationInduction Heater, Water Heater, Boiler, Automobile
Voltage380 V
Maximum Working Pressure25 bar
Ref.Capacity81544 W
Fan Dia550 mm
Cooling Area265 m2

 

We are introducing our extremely effectual range of Evaporator Coil that are made from quality mild steel that provides an outstanding durability to the product. These Evaporator Coils are offered to our customers as per the drawings provided by them. With our voluminous knowledge in the manufacturing of these Evaporator Coils, we take special care of their quality.

Salient Features:

  • Tube Bundle Construction
  • Bundle types – tube bundle or tank heaters, duty fluid, steam or tank heater
  • Tube pitch – inline or equilateral

Dx Cooling Coil

 
Usage/ApplicationIndustrial
Voltage330 V
Liquid Flow Rate4.12-15.2 L/s
Maximum Working Pressure4.0 Mpa
Maximum Operating Pressure250 psi
Maximum Fluid Temperature150degF


We are one of the most leading manufacturer & supplier of Dx Cooling Coil. These coils are easily available at market leading prices. It is manufactured under the strict supervision of the experts. Known for their durability and fine finish, it is widely applauded among our clientele.

Chilled Water Coil

 
MaterialCopper
Voltage220-380 V
Structural FormVertical
Condensation FormsAir-Cooled
Liquid Flow Rate0.1~10 M/s
Maximum Working4.5 MPa

 

We are one of the prominent manufacturers of best quality coils. Our Chilled Water Coils are highly required for their good productivity. We providing top quality of chilled water coil and glycol coils made from high grade materials soured from authorized and reliable vendors in the industry. We make available these chilled water coil and glycol coils with horizontal vertical tubes. We provide our clients different sizes of these coils which are easy to install and use. Our chilled water coil and glycol coils are highly demanded for its excellent quality and durability.

Features:

  • Cost efficient
  • Reliable
  • Easily manageable
  • Long lasting.

Industrial Cooling Coils

 
UsageIndustrial Use
BrandEnviro Tech Industrial Products
Fin MaterialAluminium
Tube Size8 mm OD to 50 mm OD
RowsSingle to twelve rows
FPI3 FPI to 12 FPI


We are a prominent entity engaged in offering the best Industrial Cooling Coil. Our procuring agents ensure that the raw material is sourced from the distinguished vendors of the markets. All our products have been able to cater to the demands of the clients owing to their attributes such as low maintenance and high durability. Precisely designed by our experienced work force using hi-tech technical machinery, these products are in compliance with the stringent parameters of the industry.

Features:

  • Low maintenance

  • Easy to install

  • Compact design

  • Less power consumption

  • High performance

HVAC Coil

 
TechniqueCold Rolled
Aluminum FoilHydrophilic / Bare
Copper TubeSmooth Tube / Inner Grooved Tube
Cooling MethodDirect Cooling
Tolerance+-1%
Fin Space1.2 mm


In order to meet huge market demands, we are involved in presenting huge array of HVAC Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature.We are leading HVAC Coil manufacturer in DELHI.


Features:

  • Superlative performance
  • Competitive prices
  • Best grade materials

Anti Corrosive Cooling Coils

 
MaterialCopper
Liquid Flow Rate3~10 M3/s
Maximum Working Pressure3 MPa
Condensation FormsAir-Cooled
RefrigerantSteam
Structural FormVertical
Heat Transfer ModeRegenerative


We have further developed Anti Corrosive Cooling Coils which enhance our products durability and functionality. Our Anti Corrosive Cooling Coils work in industrial zones where there are lot of harmful chemical in the atmosphere.

Expansion Coils

 
Tube MaterialCopper
Usage/ApplicationIndustrial
Fin MaterialAluminium
Surface TreatmentPolished
TechniqueHot Rolled, Cold Rolled, etc
Steel Grade430


We supply Direct Expansion Coil which is primarily used for the cooling and heating purpose. This coil is from 1.0 to 2.5 tons with the DX chilled water. These units are appropriate for the floor standing and ceiling suspended. Procured from genuine vendors, we use good quality of raw material in the production of our gamut. The raw material includes copper tubing, sine wave aluminum fins and has vent valve for the removal of air. For the full comfort level, the motors for the blowers have 3 speeds and the casing is fabricated with G.I sheet and powder coated. Moreover, it can be easily customized in compliance with client necessity and is delivered on time.

Double Circuit Cooling Coils

 
Usage/ApplicationAhu
Coil TypeCopper pipe
Fin MaterialAluminium
Voltage220 V
Tube Diameter7 mm
Tube Thickness0.25 mm~1.0 mm


We offer Double Circuit Fin and Tube Type Cooling Coils, used widely in heavy industries including marine motor vessels. These are designed to offer the optimum level of heating and cooling levels desired. Further, our range of cooling coils are designed to maximize heat transfer, within the constraints of air pressure drop across the cooling coil.

Air Conditioner Coils

 
Usage/ApplicationAir Condition or Refrigerator
Voltage220-380 V
BrandEnviro Tech Industrial Products
Tube Diameter7.94 mm, 9.52 mm and 12.7 mm
Liquid Flow Rate2.5 m/s
Width90 mm


Keeping in the mind the requirements of customers, we are involved in offering best quality of Air Conditioner Coils. The Air Conditioner Coils are frequently used with furnaces in the up flow or down flow position. Further, we ensure to satisfy the entire requirements of customers at market leading prices.

Features:

  • As per the industry standards
  • Corrosion resistant

A.H.U Cooling Coils

 
MaterialAluminium
Frequency50 Hz
Fin MaterialCopper
Voltage220 V
Weight5-500 kg
Maximum Working Pressure4.5 Mpa


We offer advanced range of A.H.U Cooling Coils for air Handling Units That Ensures Excellent Heat Transfer Capability with low Air Side Pressure Drop. These A.H.U Cooling Coils Can be Made Available From us at industry Leading Prices.

Aluminum Finned Copper Coil

 
Minimum Order Quantity50 Piece
MaterialCopper
Usage/ApplicationAir Handling Unit
Size610 MM X 610 MM
BrandETIP
Pipe MaterialCOPPER
Model Name/NumberENVIRO TECH INDUSTRIAL PRODUCTS
Tube Diameter1/2 INCH
Max Operating Pressure360 psi
Max Operating Temperature350 deg F
Casing18 gauge galvanized steel
Coil Tube3/8″ seamless copper tubing
Coil Area14×14 inches


Aluminum Finned Copper Coil

Applications:

Finned Coil Water to Air Heat Exchangers Can Be Used for Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling
Dehumidification
Liquid to air and air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Quantity: 1

14×14 Finned Coil Water to Air Heat Exchanger

Applications:

Finned Coil Water to Air Heat Exchangers Can be Used For Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling

Dehumidification

Liquid To Air And Air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Water to Air Heat Exchanger Dimensions And Technical

Specifications (pdf)

  • Coil Area: 14×14 Inches
  • Manifold Inlet & Outlet Connections: 1″ Copper Sweat (1-1/8″ O.D.)
  • Coil Tube: 3/8″ Seamless Copper Tubing
  • Casing: 18 Gauge Galvanized Steel
  • Fins: 12 Fins Per Inch, Aluminum
  • Max Operating Temperature: 350 deg F
  • Max Operating Pressure: 360 psi

Condenser Coil

 
Usage/ApplicationAhu
Weight2.1 kg
Voltage320 V
Tube Diameter7mm,7.94mm ,8mm,9.52mm 12.7mm,16mm
Fin Space1.3-5.3mm

 

Our range of Condenser Coil is manufactured using a high quality of raw materials which have been bought from reliable vendors and they are supplied and exported to the clients located across the globe. These coils are used for a range of applications in different products and they offer a high performance to the customers. These products have been priced at very reasonable rates and they offer a long lasting service life to the customers in the market.

Features:

  • Effective
  • High performance
  • Cost effective

Specifications:


CONDENSER COIL

Model NoSTANDARD SIZECOPPER PIPE SIZE
ETIP18′ X 16′ X 4 ROW3/8′
ETIP14′ X 14′ X 4 ROW3/8′
ETIP13′ X 12′ X 4 ROW3/8′
ETIP13′ X 12′ X 3 ROW3/8′
ETIP10′ X 12′ X 3 ROW3/8′

 


CONDENSER COIL

Model NoSTANDARD SIZECOPPER PIPE SIZE
ETIP10′ X 11′ X 3 ROW3/8′
ETIP10′ X 11′ X 2 ROW3/8′
ETIP10′ X 11′ X 2 ROW3/8′
ETIP9′ X 9′ X 2 ROW3/8′

Low Temperature Coils

 
Usage/ApplicationAhu
Cooler TypeGI Sheet
MaterialCopper Pipe
BrandETI
Fin MaterialAluminium


We are engaged in offering best quality of Low Temperature Coils, which are highly appreciated for their premium quality. These Low Temperature Coils are manufactured using high grade material and tested for their quality assurance. Further, the offered Low Temperature Coils are frequently used in various applications.

Features:

  • Accurate results
  • High tensile strength
  • Excellent performance

Booster Coil

 
Usage/ApplicationAhu
Size915×610 mm
BrandETI
Tube Length3 1/8″
Flat Side Plates9 1/8″ Casing Height)


We offer Booster Coil, which are highly appreciated, among our valued clients for its simple configuration and abrasion resistant features. These are widely used in varied industrial applications and are offered in diverse specifications, which match the complete casing of original unit.

Automobiles Air Conditioner Coil

 
Usage/ApplicationAutomobiles
Tube Size5/8″, 1/2″ ,5/8″, 20, 1″ OD
Fin Space5-20 mm
Operating Voltage115 VAC
MountingWall / Window Mount


Our customers can avail from us inclusive range of Automobiles Air Conditioner Coil that finds widespread application in factory industry. Under the supervision of our specialist professionals, the range is manufactured using premium quality raw material and advanced machines. Our professionals also support us in customizing the robust and highly functional variety as per the exact requirements of the customers.

Direct Expansion Coils

 
Minimum Order Quantity12 Number
Usage/ApplicationIndustrial
Voltage220-380 V
Liquid Flow Rate0.2-1.0m/s
BrandEnviro Tech Industrial Products
Maximum Working15 bar


We are instrumental in offering a qualitative range of Direct Expansion Coils. The entire range is manufactured in compliance with the industrial norms and standards. Our expansion coils are offered by us in varied dimensions to meet the customers’ needs.

Features:

  • Water proof
  • High durability
  • Corrosion and abrasion resistance

Heat Exchanger Coils

 
Minimum Order Quantity12 Square Feet
Usage/ApplicationAhu
BrandEnviro Tech Industrial Products
Voltage220-380 V
Liquid Flow Rate0.2-1.0 m/s
Maximum Working15 bar

We are instrumental in manufacturing and supplying a superior quality assortment of Heat Exchanger Coils. Offered product range is involved in providing solutions for various ventilation problems for commercial and industrial establishments. These products are manufactured using high grade raw material with advanced engineering concepts by our experts. We also offer these products in various specifications detailed by our esteemed clients. clients can avail these products at highly affordable prices.

Air Handling Unit Coils

 
Size96” X 14”
MaterialCopper, SS, Aluminium
BrandETI
Thickness1-5 mm
ShapeRectangle

 

As per the requirements of customers, we are involved in presenting huge array of Air Handling Coils. The Air Handling Unit Coils are available in market at reasonable prices. These Air Handling Coils are frequently used for refrigeration, air conditioning and process. Further, the offered products are highly tested for their quality assurance. We are leading.

Features:

  • Conform to the safety norms
  • Robust
  • Corrosion resistant

Gas To Air Coil

 
Usage/ApplicationAhu
BrandETI
Coil Efficiency0.88%
Coil Inlet Temp35degC
Glycol Flow Rate224-67 kg/s


Gas To Air Coil

These Gas to Air Coil offered by us are heavy in weight and takes less preservation cost. These cooling units consume less energy and necessitate very less space to place the products. These products are traded to our consumers at wide range. These cooling units are used in various applications like generator rooms, gas turbine intakes, industrial cooling of hot spots and hot zones.

Specifications:

  • Connection Form: Thread
  • Type: Direct Acting
  • Material: Alloy
  • Pressure: Ordinary Pressure

Bend Coils

 
Usage/ApplicationAhu
Tube MaterialCopper Pipe
BrandETI
Fin MaterialAluminium
Extension Spring MaterialOil Tempered Spring Steel Alloy


With the years of experience, we are providing an extensive array of Bend Coils which is highly demanded by clients due to their superior quality. Also, we keep the various demands and requirements of the clients in our mind while developing the range. We offer these Bend Coils to the clients at market leading prices.

 

Features:

 

  • Accurate results
  • High tensile strength
  • Rust free

AC Condenser

 
Usage/ApplicationAhu Unit
BrandETI
Max Working4.0 Mpa
Fin SurfacePowder paint, Bare
Working Temperature Range30-45 degree
Voltage320 V
Liquid Flow Rate4.12-15.2 L/s

Being the leading names in the industry, we are manufacturing an extensive range of AC Condenser.

Features:
  • Excellent functionality
  • Precisely designed
  • High efficiency
 

Refrigeration Coils

 
Usage/ApplicationRefrigeration
MaterialCopper
BrandEnviro Tech Industrial Products
Fin MaterialAluminium
Voltage380-420 V
Frequency50 Hz
Phase3 PH
Test Pressure2.8 Mpa

 

To meet huge market demands, we are engaged in offering utmost quality of Refrigeration Coils. These Refrigeration Coils are manufactured by our professionals using high grade material and advance technology. Further, the Refrigeration Coils are frequently used in number of applications. Our products are of world class quality.

 

Features:

 

  • High performance
  • Most reasonable prices
  • Long functional life

Specifications:

  • Condensation Forms: Water-Cooled
  • Type: Steam Condenser
  • Material: Copper

Heating Coils

 
Power SourceElectric
BrandETI
Usage/ApplicationIndustrial
Voltage280 V
Thickness0.6-3 mm
Liquid Flow Rate4.12-15.2 L/s
Maximum Working Pressure4.0 Mpa

 

Captivating the skills of our professionals, we are involved in offering utmost quality of Heating Coils. The offered Heating Coils are extensively used in variety of light commercial applications. Further, we ensure to provide unmatchable quality products to customers and satisfy their entire requirements in all manners.

 

Features:

  • Best grade materials
  • High performance
  • Long functional life

 

Ammonia Cooling Coils

 
BrandETI
Usage/ApplicationIndustrial
Voltage380 V
CapacityUp to 50 tonne ice capacity per day
MaterialCopper, Stainless Steel, Mild Steel, MS plate, 1 1/2′ C class and ISI duty ERW tubes
Frequency50 Hz

We are offering Ammonia Cooling Coils that are manufactured as per the international quality standards. Finest quality material such as MS plate, 1 1/2′ C class and ISI duty ERW tubes are used in the manufacturing process. Our product-line is appropriate for an ice plant that has up to 50 tonne ice capacity per day and are available in various specifications as per the industrial standards. Furthermore, we offer these products to clients in a spectrum of specifications at incomparable prices.

Features:

  • Outstanding performance
  • Sturdy
  • Durable
 

Hot Water Coil

 
BrandETI
ApplicationBoiler, Induction Heater, Water Heater, Automobile
Fin Space1.0-8.0 mm
Fin TypeFlat fin, Window fin, louver fin, Smooth sine wave fin
Tube O.D.7mm. 7.94mm, 9mm, 9.52mm, 12.75mm, 15.88mm

The range of products which we supply and manufacture to the customers are inclusive of an excellent range of Hot Water Coil which are used with the hot water, steam and with the glycol solutions and they comprise of thick tube walls, continuous circuit tubes with return bends and strong brazed joints. These products offer a high performance to the customers and they have been made using a high quality of steel. Our products are non-corrosive and they are very affordable.

 

Features:

  • Durable
  • High performance
  • Trouble free operation
 

Cooling Coils

 
BrandETI
Usage/ApplicationIndustrial
Voltage330 V
Liquid Flow Rate4.12-15.2 L/s
Maximum Working Pressure4.0 MPa


A wide assortment of Cooling Coils is provided by us to clients at market leading prices. These Cooling Coils are extensively used with furnaces in the vertical position and in many other suitable applications. Further, we ensure to provide best quality products to clients and satisfy their entire requirements and needs.

Features:

  • Accurate results
  • Excellent performance
  • Rust free

Copper Coil

 
MaterialCopper
Size3/8 INCH, 1/2 INCH,5/8 INCH
BrandETI
PressureMedium Pressure
Usage/ApplicationIndustrial


We are involved in the manufacture and export of high-quality Copper Coil for our esteemed clients. The base tube of these coils as well as their fin material is made of Copper. These coils help to increase the surface area of the tubes and improve the overall heat transfer efficiency. These coils are highly demanded by our clients for being light-weight, economic and corrosion-resistant.We are leading Copper Coil With Copper Fins manufacturer in DELHI.

Features:

  • Corrosion-resistant

  • Light-weight

  • Economically priced

  • Improves the overall heat-transfer efficiency

Industrial Steam Coils

 
Power SourceElectric
Usage/ApplicationWater Heater
MaterialBrass
BrandEnviro Tech Industrial Products
Copper Pipe1/2 INCH
PressureOrdinary Pressure


We offer steam coils which are highly appreciated among our valued clients for its simple configuration and abrasion resistant features. These are extensively used in varied industrial applications and are offered in varied specifications, which match the entire casing of original unit.

These heating coils are primarily used in:

  • Steam
  • Water pre heat
  • Re heat
  • Boosters

Copper Fin Tube Coils

 
Fin MaterialCopper
Tube MaterialCopper plain, inner grooved surface
BrandEnviro Tech Industrial Products
Tube Size5/8″ , 1/2″ , 3/8″
Fin0.12 mm , 0.16 mm Thick
Max Length3 mtr
Max Width1 mtr


Being an eminent company, we are engaged in offering best quality of Copper Fin Tube Coils. These Coils are extensively used in various suitable applications. Moreover, the Copper Coils are offered by us at market leading prices. Customers can avail these Coils in different sizes.

 

Features:

  • High durability
  • Competitive prices
  • Best grade materials

Heat Transfer Coil

 
Power SourceElectric
Size915 mm X 915 mm
ApplicationDecorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall, Automobile
Surface TreatmentMill Finish
BrandEnviro Tech Industrial Products
Coils Size1/2″ and 3/8″, 5/8″


Heat Transfer Coil We are offering heat transfer coil. All types of coils with 1/2” and 3/8”,5/8”. For commercial and industrial applications. these include water, steam, evaporator, condenser & custom coils. our capacities extend past normal 60,000 sq. Ft. Of coils per month. very few can compete with zeco in areas of quality, response time and value.

Steam Coil

 
BrandETI
MaterialCopper
ApplicationInduction Heater, Water Heater, Boiler, Automobile
Voltage24 V
Tube TypeSmooth, Grooved
Maximum Working40 bar
Liquid Flow Rate19-100 m3/h


We are presenting a qualitative range of Steam Coil to our customers. These Coils can be produced with a diversity of casings and headers to withstand extreme pressure tolerances. We also custom design these circuits and manifolds that enables our clients to exploit their application competence. Moreover, our experts manufacture a top of the line steam coil designed specially for our clients needs.

Condensers Chillers

 
MaterialSS
Weight1-10 ton
BrandEnviro Tech Industrial Products
Voltage220-415 V
Cooling MethodWater-cooled


Leveraging on our vast industry experience, we are providing a broad array of Condensers Chillers. The offered chillers are manufactured by the use of finest grade components along with contemporary techniques at our well-established production unit. Owing to its supreme functionality and excellent chilling capability, these chillers are widely appreciated by our clients. Apart from this, clients can avail these chillers from us at the nominal price.

Features:

  • Supreme performance
  • Excellent efficiency
  • Optimum functionality

Chillers Condenser

 
Minimum Order Quantity1 Number
MaterialSS
BrandEnviro Tech Industrial Products
Usage/ApplicationIndustrial Use
Power SourceElectric
FinishColor Coated


This is accurately developed Chillers Condenser that is used in commercial domain. The talented professionals design and develop these assortments of products using state-of-the-art technology and components. Patrons admire these products for their best quality and satisfactory performance. Additionally, customers can receive presented products at budget friendly prices.

Features:

  • High strength
  • Long life
  • High performance

Blue Fin Coil

 
MaterialSS, MS, Aluminium, Copper
BrandETI
ApplicationInduction Heater, Water Heater, Automobile
Tube Diameter7-50 mm
Tube Thickness1-3.5 mm


Leveraging over the skills of our qualified team of professionals, we are instrumental in offering wide range of Blue Fin Coil.

Features:

  • Optimum performance
  • Shock proof
  • Perfect designs

Heat Exchanger

 
Usage/ApplicationPaper and Pulping Industry
Medium Pressure1.6MPa-10.0MPa
Surface450 Sqm
DimensionW2500*H2500*Length 4000 mm
Power8-500 kW


Steam Heating Radiator in Stainless Steel Pipe MS and in Copper Pipe With Aluminum Fins of Different Sizes For Tumble Dryer.