Category: Differential Pressure Transmitter Wholesaler India

Differential Pressure Transmitter Wholesaler India

Dwyer DM-2001-LCD Differential Pressure Transmitter

 
 
Accuracy+-1% FS at 70degF
Product Weight136 g
Stability+-1% FS/yr
Temperature Limits20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Pressure Limits10 psig (0.69 bar).
Output Signal4 to 20 mA
Display3.5 digit LCD, 0.7″ H


The Dwyer Series DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges.

Dwyer DM-2002-LCD Differential Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2002-LCD
Weight4.8 oz (136 g).
Process Connections1/8″ ID tubing
Display3.5 digit LCD
Current ConsumptionDC: 38 mA max
Output Signal4 to 20 mA

Dwyer DM-2002-LCD Differential Pressure Transmitter
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models
 

Dwyer Dm-2007-LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2007
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer Dm-2012-LCD Pressure Transmitter

 
 
Product Weight4.8 oz (136 g)
BrandDWYER
Model Number/NameDM-2012-LCD
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2003-LCD Differential Pressure Transmitter

 
 
Product Weight4.8 oz (136 g).
BrandDWYER
Model Number/NameDM-2003-LCD
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height.
Current ConsumptionDC: 38 mA maximum.

Dwyer DM-2003-LCD Differential Pressure Transmitter
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2013- LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2013-LCD
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2004-LCD Pressure Transmitter

 
 
BrandDwyer
Model Number/NameDM-2004-LCD
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges.
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy.
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units.
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models.

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2005-LCD Pressure Transmitter

 
 
BrandDwyer
Product Weight4.8 oz (136 g)
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges.
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy.
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units.
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models.

Specifications:
  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Dwyer DM-2019-LCD Pressure Transmitters

 
 
Product Weight4.8 oz (136 g)
BrandDWYER
Model Number/NameDM-2019
Mounting OrientationVertical
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

DWYER Differential Pressure Transmitter Series DM-2000

 
 
Product Weight4.8 oz (136 g)
BrandDwyer
Process Connections1/8″ I.D. tubing
Display3.5 digit LCD, 0.7″ height
Electrical ConnectionsScrew-type terminal block
Current ConsumptionDC: 38 mA maximum
Loop ResistanceDC: 0-1250 ohms maximum

The Dwyer SERIES DM-2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges.

 

Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single push button allows field selection of 4 to 6 engineering units depending on range.

 

Dwyer DM-2006-LCD Pressure Transmitter

 
 
BrandDWYER
Model Number/NameDM-2006-LCD
Product Weight4.8 oz (136 g)
Loop ResistanceDC: 0-1250 ohms maximum
Current ConsumptionDC: 38 mA maximum
Electrical ConnectionsScrew-type terminal block
Display3.5 digit LCD, 0.7″ height
Process Connections1/8″ I.D. tubing
Mounting OrientationVertical

Other Details:
  • A wide range of models are available factory calibrated to specific ranges
  • Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy
  • Digital push-button zero and span simplify calibration over typical turn-potentiometers
  • An optional 3.5 digit LCD shows process and engineering units
  • A single bush button allows field selection of 4 to 6 engineering units depending on range on LCD models

 

Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Wetted Materials: Consult Factory.
  • Accuracy: ±1% F.S. at 70°F.
  • Stability: +1% F.S./yr.
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits: 10 psig (0.69 bar).
  • Thermal Effect: ±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements: 10-35 VDC (2 wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Digital push-button zero and span.
  • Loop Resistance: DC: 0-1250 ohms maximum.
  • Current Consumption: DC: 38 mA maximum.
  • Electrical Connections: Screw-type terminal block.
  • Display: 3.5 digit LCD, 0.7″ height.
  • Process Connections: 1/8″ I.D. tubing.
  • Mounting Orientation: Vertical.
  • Weight: 4.8 oz (136 g).
 

Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.02% FS/ DegreeF
Response Time250 ms
Current Consumption4 to 20 mA
Loop ResistanceDC: 0 to 1045 Q max
Output Signal4 to 20 mA DC
Power Requirements12 to 36 VDC (2-wire)
Thermal Effect0.5%


Cost Effective for B.A.S. Applications, Digital Push-Button Calibration with One- Touch Transmitter Technology.The Series 616K & 616OT Differential Pressure Transmitters with One-Touch technology are designed for simplicity making them the ideal choice for installers and maintenance professionals.The One-Touch Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product.

Beck Differential Pressure Transmitter

 
 
Minimum Order Quantity12 Number
Usage/ApplicationBuilding automation and air conditioning systems
Model Name/Number984
BrandBeck
Operating Range0 to 100 Pa
Rated Supply Voltage18…30 VDC
WidthApprox. 135 gr
Output Type0 … 10 V

Differential pressure Transmitter From Beck Gmbh 984m series are used for measuring differential pressure, positive pressure and vacuum pressure. These sensor offer 2 pressure ranges which can be alternatively be selected by a jumper for monitoring gases, clean air and non-aggressive media.


Applications:

  • Air conditioning and clean rooms
  • Building automation
  • Environment protection
  • fans and blower control
  • valve and flap control
  • filter and blower monitoring
  • stair pressurization
  • control of air flows
  • Air flow monitoring
  • Air velocity measurement
  • Gas Flow measurement
  • Gas flow metering

 

Specifications:

  • Dual jumper selectable measuring range measuring range: 0-100Pa to 0-250kPa with or without display
  • 4-20mA, 0-10V jumper selectable output square rooted function output
  • IP54, IP65 housing 2, 3 wire connection
  • Eg. 984m.535 0-1kPA/ 0-2.5 kPa
 

Series 616KD-00 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-2.0% FS
Product Weight1.8 oz (51 g)
Stability+-1% FS/yr
Temperature Limits32 to 122 DegreeF (0 to 50 DegreeC)
Pressure Limits2 psi (13.8 kPa).
Warm Up Time30 min
Current Consumption21 mA max

 

Features:

  • No additional reference pressure sources and separate calibration devices are necessary
  • Back mounting tabs are integral to the molded housing
  • Easy-to-wire open screw terminals at the top of the housing


Dwyer 616KD Series Specifications

ServiceAir and non-combustible, compatible gases
Accuracy±2% FS
Stability±1% FS/year
Temperature Range32 to 122°F (0 to 50°C)
Pressure Range2 psi (13.8 kPa)
Thermal Effect on Span±0.11% FS/°F (±0.19% FS/°C) typ
Thermal Effect on Zero

616KD-X0: 0.6%/°F (1%/°C)

616KD-X1: 0.3%/°F (0.5%/°C)

616KD-X2: 0.2%/°F (0.33%/°C)

616KD-X3: 0.12%/°F (0.2%/°C)

616KD-X4: 0.06%/°F (0.1%/°C) FS max

Power Supply16 to 35 VDC (2 or 3 wire), 20 to 28 VAC (3 wire)
Zero & SpanAdjustments Push button
Loop ResistanceDC: 1000 Ω max
AC: 1200 Ω max
Current Consumption21 mA max
Electrical ConnectionsScrew-type terminal block
Process ConnectionsBarbed, dual size to fit 1/8″ & 3/16″ (3 mm & 5 mm) ID rubber or vinyl tubing
Mounting OrientationPosition insensitive
Weight1.8 oz (51 g)

Series 616KD-01 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.25%
Product Weight1.8 oz (51 g).
Warm Up Time20 min
Current Consumption24 mA
Output Signal4 to 20 mA
Stability+-1% FS/year.


These low-cost, compact transmitters reduce up-front costs as well as expenses over the life of the product. These transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume, and filter monitoring. With the One-Touch digital push button, both zero and span are calibrated simultaneously. Just let the unit sit at zero reference pressure, then push the button. Mounting is simple with integral mounting holes on the molded housing; unit can also be mounted on a 35-mm DIN rail. A protective cap snaps directly on to the housing to cover wiring terminals.

Specifications:

Accuracy±2% full-scale
Min Pressure (in WC)0
Max Pressure (in WC)2
Min Temperature (° F)32
Max Temperature (° F)122
Min Temperature (° C)0
Max Temperature (° C)50
Process Connection1/8″ and 3/16″ hose barbs
Unit Of Measurement” WC
Battery Type16 to 35 VDC
Electrical ConnectionsScrew terminal
Output4 to 20 mA
EnclosureRatingNEMA 1, IP20
HousingPolycarbonate
Media CompatibilityAir and noncombustible, compatible gases
DescriptionDifferential Pressure Transmitter, 4 to 20 mA Output, 2 IN WC

Series 616KD-02 Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Number
Accuracy+-0.25% FS
Product Weight1.8 oz (51 g)
Temperature Limit0 to 140 DegreeF (-17.8 to 60 DegreeC)
Power Requirements4-20 mA
RatingIP 20
Warm Up Time20 min


These low-cost, compact transmitters reduce up-front costs as well as expenses over the life of the product. These transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume, and filter monitoring. With the One-Touch digital push button, both zero and span are calibrated simultaneously. Just let the unit sit at zero reference pressure, then push the button. Mounting is simple with integral mounting holes on the molded housing; unit can also be mounted on a 35-mm DIN rail. A protective cap snaps directly on to the housing to cover wiring terminals.

Specifications:

Accuracy±2% full-scale
Min Pressure (in WC)0
Max Pressure (in WC)2
Min Temperature (° F)32
Max Temperature (° F)122
Min Temperature (° C)0
Max Temperature (° C)50
Process Connection1/8″ and 3/16″ hose barbs
Unit Of Measurement” WC
Battery Type16 to 35 VDC
Electrical ConnectionsScrew terminal
Output4 to 20 mA
EnclosureRatingNEMA 1, IP20
HousingPolycarbonate
Media CompatibilityAir and noncombustible, compatible gases
DescriptionDifferential Pressure Transmitter, 4 to 20 mA Output, 3 IN WC

Series 616KD Differential Pressures Transmitter

 
 
Minimum Order Quantity12 Piece
Product Weight1.8 oz (51 g)
BrandDwyer
Current Consumption21 mA max
Warm Up Time30 min
Loop ResistanceDC: 1000 Q max.; AC: 1200 Q max
Output Signal4 to 20 mA or unit with field selectable 0 to 10 & 0 to 5 volt.
Zero and Span AdjustmentsPush button


The SERIES 616KD Differential Pressure Transmitters with One-Touch® Digital Push- Button Calibration Technology are designed for simplicity, making them the ideal choice for installers and maintenance professionals. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instruments during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources or separate calibration devices are necessary.
Product Applications:

  • Air handlers
  • Duct pressure
  • Variable air volume
  • Filter monitoring

Details:

ModelDescription
616KD-00Differential pressure transmitter, 0 to 1″ w.c., 4-20 mA.
616KD-01Differential pressure transmitter, 0 to 2″ w.c., 4-20 mA.
616KD-02Differential pressure transmitter, 0 to 3″ w.c., 4-20 mA.
616KD-03Differential pressure transmitter, 0 to 5″ w.c., 4-20 mA.
616KD-04Differential pressure transmitter, 0 to 10″ w.c., 4-20 mA.
616KD-05Differential pressure transmitter, 0 to 15″ w.c., 4-20 mA.
616KD-06Differential pressure transmitter, 0 to 20″ w.c., 4-20 mA.
616KD-07Differential pressure transmitter, 0 to 25″ w.c., 4-20 mA.
616KD-10Differential pressure transmitter, 0 to 250 Pa, 4-20 mA.
616KD-11Differential pressure transmitter, 0 to 500 Pa, 4-20 mA.
616KD-12Differential pressure transmitter, 0 to 750 Pa, 4-20 mA.
616KD-13Differential pressure transmitter, 0 to 1250 Pa, 4-20 mA.
616KD-14Differential pressure transmitter, 0 to 2500 Pa, 4-20 mA.
616KD-15Differential pressure transmitter, 0 to 5000 Pa, 4-20 mA.