Mounting Options Dwyer Instruments

Magnehelic Gauge with S.S. Enclosure

Brand	ETIP
Material	SS
Dial Size	4 inch
Material Grade	SS304
Ranges	mm/wc,In/wc, Pascal
Enclosure Type	Consul Type & Wall Mounting
Front Panel	Zero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge With S.S. Enclosure. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

Available in different specifications ranging from:

0-10,
0-25,
0-40,
0-50,
0-100 MM Wc , And
0- 60 pA,
0-250 pA.

Uses:

Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

Sensocon USA Differential Pressure Gauge 10-0-10 Mm Wc

Minimum Order Quantity	1 Number
Measuring Range(mm)	10-0-10 MM WC
Model No.	2300-20MM
Brand	Sensocon USA
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection	1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
Accessories	Two 1/8″ NPT barbed fittings,two 1/8″ NPT plugs, and three mounting tabs and screws
Approvals	RoHS, CE

Sensocon Usa Differential Pressure Gauge10-0-10 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc

Minimum Order Quantity	1 Number
Display Type	Analog Dial
Measuring Range(mm)	6-0-6 MM WC
Model No.	2300-10MM
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Resolution	0.2
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 Degree to 140 deg F (-7 deg to 60 deg C)
Approvals	RoHS, CE

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon USA Differential Pressure Gauge 0 To 200 Mm Wc

Minimum Order Quantity	1 Number
Display Type	Analog
Measuring Range(mm)	0 to 200 MM WC
Brand	Sensocon USA
Model No.	S2000-200MM
Accuracy	+-2% full-scale
Resolution	0.2
Media Compatibility	Gases and liquids compatible with wetted materials
Dial Size (in)	4
Dial Size (mm)	102
Max Pressure (in WC)	10
Wetted Materials	Aluminum
Case	Aluminum
Lens Material	Acrylic
Process Connection	1/8″ NPT
Unit Of Measurement	” WC

Sensocon Usa Differential Pressure Gauge 0 To 200 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc

Minimum Order Quantity	1 Number
Display Type	Analog Dial
Measuring Range(mm)	0 to 150 MM WC
Model No.	S2000-150MM
Accuracy	+-2% full-scale
Case And Bezel	Aluminum
Resolution	0.2
Brand	Sensocon USA
Media Compatibility	Gases and liquids compatible with wetted materials
Dial Size (in)	4
Dial Size (mm)	102
Max Pressure (in WC)	10
Wetted Materials	Aluminum
Lens Material	Acrylic
Process Connection	1/8″ NPT
Unit Of Measurement	” WC
Description	Magnehelic Differential Pressure Gauge, Type , 0 to 150 MM WC

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 TO 30 MM WC
Model No.	S2000-30MM
Brand	Sensocon USA
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection	1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Approvals	RoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 to 15 MM WC
Model No.	S2000-15MM
Brand	Sensocon USA
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection	1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
Approvals	RoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 to 25 MM WC
Brand	Sensocon USA
Model No.	S2000-25MM
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection	1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Approvals	RoHS, CE

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Magnehelic Gauge With SS Enclosure

Brand	ENVIRO TECH
Model Name/Number	Magnehelic Gauge With SS Enclosure
Usage/Application	Industrial
Material	Steel
Connection	New
Color	Silver
Size	160 X160 X 80 mm
Gauge	20 SWG
Warranty	1 YERS
Material Grade	SS 304
I Deal In	New Only
Country of Origin	Made in India

Magnehelic Gauge With SS Enclosure

Price Will Be Change As Per Size And MOC

Sensocon USA Differential Pressure Gauge 0 To 80 Mm Wc

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 to 80 MM WC
Model No.	S2000-80MM
Brand	Sensocon USA
Accuracy	+/- 2% full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 deg F (21 deg C)
Weight	1 lb 2 oz (510 g)
Housing Material	Die cast aluminum case and bezel (ABS for P2000), with acrylic cover
Media Compatibility	Air and compatible gasses
Warranty	2 years
Pressure Limits	-20″ Hg to 15 PSI (-0.677 bar to 1.034 bar)
Temperature Ranges	20 deg to 140 deg F (-7 deg to 60 deg C)
Process Connection	1/8″ female NPT
Approvals	RoHS, CE

Bezel provides flange for flush mounting in panel. Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.

Sensocon 2000-80mm Differential Pressure Gauge0-80 Mm

Precision litho-printed scale is accurate and easy to read.
Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
Pointer stops of molded rubber prevent pointer over-travel without damage.
“Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
O-ring seal for cover assures pressure integrity of case.

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

Minimum Order Quantity	1 Number
Display Type	Analog dial
Measuring Range(mm)	0 to 125 MM WC
Model No.	S2000-125MM
Brand	Sensocon USA
Accuracy	+-2% full-scale
Case And Bezel	Aluminum
Resolution	0.2
Media Compatibility	Gases and liquids compatible with wetted materials
Dial Size (in)	4
Dial Size (mm)	102
Max Pressure (in WC)	10
Wetted Materials	Aluminum
Lens Material	Acrylic
Process Connection	1/8″ NPT
Unit Of Measurement	” WC
Description	Magnehelic Differential Pressure Gauge, Type , 0 to 125 MM WC

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

MS Flesh Type Magnehelic Gauge

Brand	ETIP
Material	PS for Cup, PP for Ring
Measurement Object	Depth
Gauge Type	Limit Gauge
Surface Finish	Polished

We are one of the topmost manufacturer, exporter and supplier of a superior quality range of MS Box Flesh type Magnehelic Gauge. These instruments are designed and made utilizing the finest grade raw material by following high definition engineering principles. Furthermore, these are widely appreciated for some of the salient features like accurate dimension, durability, superior performance and corrosion resistance. We provide these to our clients in both, standard and customized options according to the specific demands of customers.

GI Magnehelic Gauge Box

Display Type	Analog
Material	GI Sheet
Brand	ETIP
Size/Dimension	4 inch
Connection Type	Axial
Indicating Pressure Reference	General Pressure Gauge
Installation Structure	Convex

We have been continuously indulged in supplying a high quality array of GI Magnehelic Gauge Box to our highly valued consumers. Our products are highly acclaimed for their performance and quality. These are widely execute in numerous sectors. These products are gettable at leading market prices.

Magnehelic Gauge SS Plate Front Cover

Material	SS
Brand	ETIP
Wetted Parts	SS 304
Diameter	4 inch
Ranges	mm/wc,In/wc, Pascal
Enclosure Type	Consul Type & Wall Mounting
Front Panel	Zero Calibration Gas Selector Switch Optional

We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

Available in different specifications ranging from:

0-10,
0-25,
0-40,
0-50,
0-100 MM Wc , And
0- 60 pA,
0-250 pA.

Uses:

Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

Magnehelic Gauge L Plat

Material	SS
Packaging Type	1
Material Grade	SS 304
Brand	ETIP
Wetted Parts	SS 304
Applications	Magnehelic Gauge L Plat
I Deal In	New Only
Plate Shape	L Shape
Thickness Of Sheet	1 mm

L Plat Magnehelic Gauge

Sheet SS 304
MACK Enviro Tech Industrial Products
Application Product MAGNEHELIC GAUGE
Thickness Of Sheet 1 MM

Magnehelic Gauge Shape Plate

Material	SS
Usage/Application	Magnehelic Gauge
Shape	Square
Material Grade	SS 304
Brand	ETIP
Wetted Parts	SS 304
Thickness Of Sheet	1 mm

MAGNEHELIC GAUGE Shape Plate

Sheet —- SS 304
MACK —- Enviro Tech Industrial Products
Application Product——-MAGNEHELIC GAUGE
Thickness Of Sheet——1 MM
Center Hole —————100 MM

Magnehelic Differential Pressure Gauge SS Box

Brand	ETIP
Display Type	Analog
Material	Stainless Steel
Measurement Object	Length
Dial Type	Dial Indicator

This SS-304, SS-202, stainless steel hinged box has a polished satin finish. This box has a hinged door with a face cutout to accept a Dwyer magnehelic pressure gauge. Box comes complete with holes to accept pressure differential sensors. Box is fabricated with a flanged face for recess mounting.

Connection Kit for Pressure Gauge

Material	Plastic
Brand	ETIP
Color	Black
Size	5×8 mm
Tube Length	2 m

Connection kit for pressure Gauge:
Used to access pressure measurement points . e.g either side of the filter on an Air Handling Unit.

Mounting Box

Material	SS
Brand	ETIP
Material Grade	SS304
Installation Structure	Direct Mounting
Function	Local Indication Type
Display Type	Analog

Bracket is Surface Mounted. Steel With Gray Hammer tone Epoxy Finish. For Use With Dwyer Series.

Wall Grouting Box

Brand	ETIP
Material	SS
Wetted Parts	SS 304
Weight	60 kg
Power	2200 W
Size	105x50x105 cm
Capacity	20 L
Mounting Of Gauge	18 SWG
Voltage	220 V AC

Wall Grouting Box is a Mild Steel Powder Coated Box with Stainless Steel Front Flush Plate for mounting Differential Pressure Gauges into Brick Walls / Modular Walls.

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

Minimum Order Quantity	1 Number
Dial Size	4 inch / 100 mm
Brand	Dwyer
Pressure Range	3-0-3 MM WC
Use	HVAC Systems
Display Type	Analog
Pressure Type	Differential Pressure
Connection Type	NPT
Connection Size	1/8 inch
Accuracy	+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Temperature Limits	20 to 140 deg F (-6.67 to 60 deg C)
Agency Approval	RoHS

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnehelic gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

Minimum Order Quantity	1 Number
Dial Size	4 inch / 100 mm
Pressure Range	-0.677 to 1.034 bar
Use	HVAC Systems
Display Type	Analog
Pressure Type	Differential Pressure
Connection Type	NPT
Connection Size	1/8 inch
Accuracy	+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Brand	Dwyer USA
Agency Approval	RoHS
Temperature Limits	20 to 140 deg F (-6.67 to 60 deg C)
Overpressure	25 psig (1.72 bar)

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Magnehelic Gauge Enclosures

Material	SS 304
Shape	Square, Triangle
Brand	ENVIRO TECH
Color	Black
Size/Dimension	160 X160 X 80 mm
Mounting Plate Thickness	20 SWG
Type	SS 304
Warranty	1 YERS
Model Name/Number	Magnehelic Gauge Enclosures
Packaging	1
Usage/Application	Magnehelic Gauge
I Deal In	New Only
Country of Origin	Made in India

Magnehelic Gauge Enclosures

Price Will Be Change As Per Size And MOC

A – 103 Mounting Plate

Minimum Order Quantity	100 No
Brand	ETIP
Material	Aluminum, SS
Surface Finish	Polished
Shape	Square
Steel Grade	SS304

A – 103 Mounting Plate

Aluminium / ss metal plate and screws to surface mount the S2000 differential pressure gauge

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 to 500 MM WC
Brand	Dwyer USA
Model No.	2000-500MM
Accuracy	+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case and bezel
Wetted Materials	Consult Factory
Pressure Limits	-20 in Hg to 15 psig
Overpressure	25 psig (1.72 bar)
Temperature Limits	20 to 140 deg F (-6.67 to 60 deg C)
Agency Approval	RoHS

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Dwyer USA Magnehelic Gauges 0 To 10 MM WC

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 to 10 MM WC
Brand	Dwyer USA
Model No.	2300-10MM
Accuracy	+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die Cast Aluminum Case And Bezel
Pressure Limits	-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar)
Temperature Limits	20 to 140 deg F (-6.67 to 60 deg C)
Agency Approval	RoHS

Dwyer Usa Magnehelic Gauges 0 To 10 Mm

Wcincludes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Specifications & Description:

Accuracy+-2% full-scale
Dial Size (in)4
Dial Size (mm)102
Min Pressure (in WC)0
Max Pressure (in WC)10
Wetted MaterialsAluminum
CaseAluminum
Lens Materialacrylic
Process Connection1/8″ NPT
Unit Of Measurement” WC
Displayanalog dial
Media CompatibilityGases and liquids compatible with wetted materials
Resolution0.20
DescriptionMagnehelic Differential Pressure Gauge, Type , 0 to 10 MM WC

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

Minimum Order Quantity	1 Number
Measuring Range(mm)	0 TO 6 MM WC
Brand	Dwyer USA
Model No.	2000-6MM
Accuracy	+-2% of FS (+-3% on – 0, -100 Pa, -125 Pa, 10MM and +-4% on – 00, -60 Pa, -6MM ranges)
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Size	4″ (101.6 mm) diameter dial face
Pressure Limits	-20 in Hg to 15 psig (-0.677 to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig
Temperature Limits	20 to 140 deg F (-6.67 to 60 deg C)
Process Connections	1/8″ female NPT
Agency Approval	RoHS

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

Includes:

Two 1/8″ NPT plugs, two 1/8″ rubber tubing adapters, and three mounting adapters with screws

More About This Item:

The Magnahelic guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge’s motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.
The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

+91-9868958924, 9650264867

E-mail us

India

Category: Mounting Options Dwyer Instruments

Magnehelic Gauge with S.S. Enclosure

Sensocon USA Differential Pressure Gauge 10-0-10 Mm Wc

Sensocon USA Differential Pressure Gauge 6-0-6 Mm Wc

Sensocon USA Differential Pressure Gauge 0 To 200 Mm Wc

Sensocon USA Differential Pressure Gauge 0 To 150 Mm Wc

Sensocon Usa Differential Pressure Gauge 0 To 30 Mm Wc

Sensocon Usa Differential Pressure Gauge 0 To 15 Mm Wc

Sensocon Usa Differential Pressure Gauge 0 To 25 Mm Wc

Magnehelic Gauge With SS Enclosure

Sensocon USA Differential Pressure Gauge 0 To 80 Mm Wc

Sensocon USA Differential Pressure Gauge 0 To 125 Mm Wc

MS Flesh Type Magnehelic Gauge

GI Magnehelic Gauge Box

Magnehelic Gauge SS Plate Front Cover

Magnehelic Gauge L Plat

Magnehelic Gauge Shape Plate

Magnehelic Differential Pressure Gauge SS Box

Connection Kit for Pressure Gauge

Mounting Box

Wall Grouting Box

Dwyer USA Magnehelic Gauges 3-0-3 MM WC

Dwyer USA Magnehelic Gauges 0 To 300 MM WC

Magnehelic Gauge Enclosures

A – 103 Mounting Plate

Dwyer USA Magnehelic Gauges 0 To 500 MM WC

Dwyer USA Magnehelic Gauges 0 To 10 MM WC

Dwyer USA Magnehelic Gauges 0 To 6 MM WC

Recent Posts

About Us

Quick Links

Contact Us

Reach Us