Series 629 Wet Differential Pressure Transmitter Wholesaler India DELHI

Series 629 Wet/Wet Differential Pressure Transmitter

Minimum Order Quantity	1 Number
Usage/Application	Industrial
Model Name/Number	Series 629
Brand	Dwyer
Protection Type	IP54
Measuring Range	20-200Pa to 200-4000Pa
Operating Temperature	-20 deg C to +60 deg C

Series 629 Wet/Wet Differential Pressure Transmitter

0.5% Accuracy, NEMA 4X Enclosure

This Series Is No Longer Available, See Series 629C For The Suggested Replacement.

The SERIES 629 Differential Pressure Transmitter Monitors Differential Pressure Of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability. Terminal block, zero and span adjustments are easily accessed under the top cover. The Series 629 Differential Pressure Transmitter is designed to meet NEMA 4X (IP66) construction.

FEATURES/BENEFITS

Versatile, high-accuracy device for liquid or gas supports designs requiring more precise measurements in support of application

Minimum components provide excellent response and reliability
Span and zero controls reduce installation and service time
Terminal block reduces wiring difficulties saving installation time
Optional LED indicator provides local status to identify operational conditions.
Optional 3-way valve manifold supports higher line pressures or simplifying removal of transmitter without interrupting process

APPLICATIONS

Flow Elements
Heat Exchangers
Filters
Coils
Chiller
Pumps

Specifications

Service:Compatible Gases and Liquids.
Wetted Materials:Without valve: 316, 316L SS. Additional wetted parts with 3-way valve option: Buna-N, silicone grease, PTFE, brass 360, copper, reinforced acetal copolymer.
Accuracy:±0.5% F.S. (includes linearity, hysteresis, and repeatability).
Temperature Limits:0 to 200°F (-18 to 93°C).
Compensated Temperature Limits:0 to 175°F (-18 to 79°C).
Pressure Limits:See Ordering page.
Thermal Effect:0.02%/°F (0.036%/°C) includes zero and span.
Power Requirements:13 to 30 VDC.
Output Signal:4 to 20 mA. Optional 0 to 5 or 0 to 10 VDC.
Response Time:50 ms.
Loop Resistance:0 to 1300 Ω maximum for current output. For voltage outputs, minimum load resistance: 2000 Ω.
Electrical Connections:Terminal block; 1/2″ female NPT conduit.
Process Connection:1/4″ female NPT.
Enclosure Rating:Designed to meet NEMA 4X (IP66).
Mounting Orientation:Mount in any position.
Weight:10.1 oz (286 g).
Agency Approvals:CE.
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale.

Dwyer 629C-02-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Monitor Differential Pressure Across,Flow Elements,Heat Exchangers,Filters,Pumps,Coils,Chiller
Model Name/Number	Dwyer 629C-02-CH-P2-E5-S1
Brand	Dwyer USA
Voltage	4 to 20 mA. Optional 0-5 or 0-10 VDC
Accuracy	+-0.5% F.S. (includes linearity, hysteresis, and repeatability)
Operating Range	10 PSID
Product Weight	10.1 oz (286 g)
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Country of Origin	Made in India

Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

Model: 629C
Order No: 629C-02-CH-P2-E5-S1

Monitors Differential Pressure of Air and Compatible Gases and liquids with 0.5% accuracy with a working pressure 20 psi and an over pressure 100 psi.

DESCRIPTION

Dwyer 629C Series Offers

Features

Versatile, high accuracy device for liquid or gas supports designs requiring more precise measurements in support of application
Minimum components provide excellent response and reliability
Zero control reduces installation and service time
Terminal block reduces wiring difficulties saving installation time

New Features

Powered by either DC or AC– take advantage of most readily available power source reducing installation costs.
Optional LCD does not need a separate power supply – lowers installed cost.
Selectable voltage ranges on voltage units – provides flexible choice for changing designs or matching inputs for controller equipment being used to monitor and control. Additionally minimizes number of stocked units.
Push button zero (versus trim pot adjustment)– easier more simpler zeroing provides easy install and calibration reducing installation time and possibility of operator error.
Rugged NEMA 4X enclosure even with optional LCD permits use in many environments.
Locking Hex nut connection prevents inadvertent stripping out of process connection.

Functional Specifications

Service: Compatible gases and liquids
Wetted Materials: Without valve: 316, 316L SS. Additional wetted parts with valve option: Buna-N, silicone grease, PTFE, brass 360, copper, and reinforced copolymer
Accuracy: ±0.5% F.S. (includes linearity, hysteresis, and repeatability)
±1% FS/year.
Compensated Temperature Limits: 0 to 175°F (-18 to 79°C)
Thermal Effect: 0.04%/°F (0.072%/°C) includes zero and span
Output Signal: 4 to 20 mA. Optional 0-5 or 0-10 VDC
Response Time: 400 msec
Loop Resistance: Current output 0-1250 Ω maximum, Rmax = 50(Vps-10, minimum load resistance: 5 kΩ
Current Consumption: 28 mA (max).
Electrical Connections: Terminal block; 1/2″ female NPT conduit
Process Connection: 1/4″ female NPT
Optional 4-1/2 digit LCD field attachable display
Mounting Orientation: Not position sensitive

General Specifications

Power Requirements: 13 to 30 VDC
Weight: 10.1 oz (286 g)

Applications

Monitor Differential Pressure Across:
Flow Elements
Heat Exchangers
Filters
Pumps
Coils
Chiller
Calibration Lab

INCLUDED
What’s Included With The Dwyer 629C Dwyer 629C-02-CH-P2-E5-S1 Wet/Wet Differential Pressure Transmitter Range 10 psid

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-R2-P1-E5-S1
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Model – 629C-02-R2-P1-E5-S1
Description–Wet/wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors And 20’Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-R2-P1-E5-S1
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-R2-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Model-629C-02-R2-P1-E5-S1
Description-Wet Differential Pressure Transmitter,Range 10 PSID,Working Pressure 20 PSI,Over Pressure 100 PSI With Remote Sensors and 20′ Shielded Cable

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X IP66 construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option

Specifications

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S.includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories
A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-CH-P2-E5-S3-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 10 PSID

Model – 629C-02-CH-P2-E5-S3-3
Description-Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 PSID,Working Pressure 50 PSI,Over Pressure 250 PSI.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-CH-P2-E5-S1-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 10 PSID

Model – 629C-02-CH-P2-E5-S1-3
Description – Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 10 psid,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-CH-P2-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 10 PSID

Model – 629C-02-CH-P2-E5-S3
Description-Wet/Wet Differential Pressure Transmitter,Range 10 PSID,Conduit Housing,1/4″ NPT Female Process Connections,0-10 V output.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-03-CH-P2-E5-S1
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-CH-P2-E5-S1
Description–Wet/Wet Differential Pressure Transmitter, Range 25 PSID, Working Pressure 50 PSI, Over Pressure 120 PSI.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-02-R6-P1-E5-S1
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	10 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID
Country of Origin	Made in India

Dwyer 629C-02-R6-P1-E5-S1 Wet Differential Pressure Transmitter Range 10 PSID

Model – 629C-02-R6-P1-E5-S1
Description–Wet/Wet Differential Pressure Transmitter, Range 10 PSID, Working Pressure 20 PSI, Over Pressure 100 PSI With Remote Sensors And 20′ Armored Cable

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Series 629C Wet/Wet Differential Pressure Transmitter

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Series 629C
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity,hysteresis & repeatability)
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Country of Origin	Made in India

Series 629C Wet/Wet Differential pressure Transmitter

0.5% Accuracy, NEMA 4X (IP66) Enclosure

The Series 629C Wet/Wet Differential Pressure Transmitter monitors Differential Pressure of Air and Compatible gases and liquids with 0.5% accuracy.The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button,are easily accessed under the top cover.
The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20” lengths.Installation is much simpler, reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction,which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Model Description

629C-02-CH-P2-E5-S1-Range 10 psid,Working Pressure 20 psi,Over Pressure 100 psi.
629C-02-CH-P2-E5-S1-3-With 3-Way Valve Package, Range 10 psid,conduit housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA
629C-02-CH-P2-E5-S3-Range 10 Psid,Conduit Housing, 1/4″ NPT Female Process Connections,0-10 V output.
629C-02-CH-P2-E5-S3-3-with 3-way valve package, range 10 psid,working pressure 50 psi,over Pressure 250 psi.
629C-02-R2-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” shielded cable.
629C-02-R6-P1-E5-S1-Range 10 psid,working pressure 20 psi,over pressure 100 psi with remote sensors and 20” armored cable.
629C-03-CH-P2-E5-S1-Range 25 psid,working pressure 50 psi,over pressure 120 psi.
629C-03-CH-P2-E5-S1-3-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA
629C-03-CH-P2-E5-S3-Range 25 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
629C-03-CH-P2-E5-S3-3-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.
629C-03-R1-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.
629C-03-R5-P1-E5-S3-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.
629C-04-CH-P2-E5-S1-Range 50 psid,working pressure 100 psi,over pressure 250 psi.
629C-04-CH-P2-E5-S1-3-With 3-way valve package, range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA
629C-04-CH-P2-E5-S3-Range 50 psid,conduit housing, 1/4″ NPT female process connections,0-10 V output.
629C-04-CH-P2-E5-S3-3-With 3-way valve package, range 50 psid, working pressure 100 psi,over pressure 250 psi.
629C-05-CH-P2-E5-S1-Range 100 psid,working pressure 200 psi,over pressure 500 psi.
629C-05-CH-P2-E5-S1-3-With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA
629C-05-CH-P2-E5-S3-Range 100 psid, conduit housing,1/4″ NPT female process connections,0-10 V output.
629C-05-CH-P2-E5-S3-3-With 3-way valve package, range 100 psid,working pressure 200 psi,over pressure 500 psi.
629C-05-R1-P1-E5-S3-Range 100 psid,working pressure 200 psi, over pressure 500 psi with remote sensors and 10” shielded cable.
629C-05-R5-P1-E5-S3-Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-03-CH-P2-E5-S1-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-CH-P2-E5-S1-3
Description-With 3-way valve package, range 25 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit,4-20 mA

The Series 629C Wet/Wet Differential Pressure Transmitter Monitors Differential pressure of air and Compatible Gases and Liquids with 0.5% Accuracy.The Design Employs Dual Pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.Small internal volume and minimal moving parts result in exceptional response and reliability.The terminal block,as well as a zero adjustment button, are easily accessed under the top cover.The Series 629C,with the optional factory installed remote sensors,are connected to the unit,either via armored or shielded cable and available in 10 and 20′ lengths.Installation is much simpler,reducing labor and material cost versus traditional copper piping installations and no need for valve manifolds.The 629C family has a robust NEMA 4X (IP66) construction, which is also available with an integral LCD for localized data monitoring and with a remote sensor option.

Specifications

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-03-CH-P2-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-CH-P2-E5-S3
Description-With 3-way valve package, range 25 psid, working pressure 50 psi,over pressure 250 psi.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-03-CH-P2-E5-S3-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected)
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-CH-P2-E5-S3-3
Description-Range 25 psid,conduit housing,1/4″ NPT female process connections,0-10 V output.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-04-CH-P2-E5-S3-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	50 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of Origin	Made in India

Dwyer 629C-04-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 50 PSID

Model – 629C-04-CH-P2-E5-S3-3
Description-With 3-Way Valve Package,Range 50 PSID,Working Pressure 100 PSI,Over Pressure 250 PSI.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-04-CH-P2-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	50 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID
Country of Origin	Made in India

Dwyer 629C-04-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 50 PSID

Model – 629C-04-CH-P2-E5-S3
Description-Range 50 psid,conduit housing,1/4″ NPT Female Process Connections,0-10 V Output..

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-04-CH-P2-E5-S1-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	50 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID
Country of Origin	Made in India

Dwyer 629C-04-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 50 PSID

Model – 629C-04-CH-P2-E5-S1-3
Description-With 3-way valve package,range 50 psid,conduit housing,NEMA 4X,1/4″ female NPT, 1/2″ female NPT conduit, 4-20 mA

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-04-CH-P2-E5-S1
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	50 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID
Country of Origin	Made in India

Dwyer 629C-04-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 50 PSID

Model – 629C-04-CH-P2-E5-S1
Description-Range 50 psid,working pressure 100 psi,over pressure 250 psi.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-03-R1-P1-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-R1-P1-E5-S3
Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” shielded cable.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-R5-P1-E5-S3
Brand	DWYER USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-R5-P1-E5-S3
Description – Range 100 psid,working pressure 200 psi,over pressure 500 psi with remote sensors and 10” armored cable.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155–Cable Gland With 1/2″ Male NPT Fitting,A-228–Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B–Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3–Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-R1-P1-E5-S3
Brand	DWYER USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-R1-P1-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-R1-P1-E5-S3
Description–With 3-way valve package, range 100 psid, conduit housing,NEMA 4X,1/4″ female NPT,1/2″ female NPT conduit,4-20 mA

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-CH-P2-E5-S3-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	100 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-CH-P2-E5-S3-3 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-CH-P2-E5-S3-3
Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Working Pressure 200 PSI,Over Pressure 500 PSI.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Accessories

A-155-Cable Gland With 1/2″ Male NPT Fitting,A-228-Stainless Steel Flex Hose,12″ (30.48 cm) Long,1/8″ Male NPT Connections,BBV-1B-Mini 3-Valve Block Manifold,A-62X-LCD-Field Upgradeable LCD Display,A-629C-3V-3-Way Manifold & Bracket For Pressure Transmitters

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-CH-P2-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	100 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-CH-P2-E5-S3 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-CH-P2-E5-S3
Description–Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Conduit Housing, 1/4″ NPT Female Process Connections, 0-10 V Output.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-CH-P2-E5-S1-3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	100 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-CH-P2-E5-S1-3 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-CH-P2-E5-S1-3
Description–Wet/Wet Differential Pressure Transmitter With 3-Way Valve Package,Range 100 PSID,Conduit Housing,NEMA 4X,1/4″ Female NPT,1/2″ Female NPT Conduit,4-20 mA.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

Minimum Order Quantity	1 Number
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	Dwyer 629C-05-CH-P2-E5-S1
Brand	DWYER USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs (
Protection Type	Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID
Country of Origin	Made in India

Dwyer 629C-05-CH-P2-E5-S1 Wet Differential Pressure Transmitter Range 100 PSID

Model – 629C-05-CH-P2-E5-S1
Description – Wet/Wet Differential Pressure Transmitter, Range 100 PSID, Working Pressure 200 PSI, Over Pressure 500 PSI.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Minimum Order Quantity	1 Pack
Usage/Application	Flow Elements,Heat Exchangers,Filters,Coils,Chiller,Pumps
Model Name/Number	629C-03-R5-P1-E5-S3
Brand	Dwyer USA
Voltage	2-wire: 10 to 35 VDC; 3-wire: 13 to 35 VDC or isolated 16 to 33 VAC (reverse polarity protected).
Accuracy	+-0.5% FS (includes linearity, hysteresis & repeatability)
Operating Range	25 PSID
Product Weight	629C-XX-CH: 10.1 oz (286 g); 629C-XX-R2-P1-E5-XX: 2.3 lbs (1.04 kg); 629C-XX-R6-P1-E5-XX: 4.55 lbs
Protection Type	Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Rated Supply Voltage	13 to 30 VDC
Supply Voltage Limits	13 to 30 VDC
Part Type	Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID
Country of Origin	Made in India

Dwyer 629C-03-R5-P1-E5-S3 Wet Differential Pressure Transmitter Range 25 PSID

Model – 629C-03-R5-P1-E5-S3
Description-Range 25 psid,working pressure 50 psi,over pressure 250 psi with remote sensors and 10” armored cable.

Service:Compatible Gases and Liquids
Wetted Materials:Without Valve:316,316L SS.Additional Wetted Parts with 3-Way Valve Option:Buna-N,Silicone Grease,PTFE,Brass 360,copper,Reinforced Acetal Copolymer
Accuracy:±0.5% F.S. includes linearity,Hysteresis,And Repeatability
Temperature Limits:0 to 200°F (-18 to 93°C)
Compensated Temperature Limits:0 to 175°F (-18 to 79°C)
Pressure Limits:See Ordering Page
Thermal Effect:0.02%/°F (0.036%/°C) Includes Zero And Span
Power Requirements:13 to 30 VDC
Output Signal:4 to 20 mA.Optional 0 To 5 or 0 to 10 VDC
Response Time:50 ms
Loop Resistance:0 to 1300 Ω maximum for current output.For voltage outputs,Minimum load Resistance: 2000 Ω
Electrical Connections:Terminal Block;1/2″ female NPT Conduit
Process Connection:1/4″ Female NPT
Enclosure Rating:Designed to Meet NEMA 4X (IP66)
Mounting Orientation:Mount in any position
Weight:10.1 oz 286 g
Agency Approvals:CE
NOTE:Pressures Exceeding The Working Pressure Limit May Cause a Calibration Shift of Up to ±3% of Full Scale

Features

Powered By Either DC or AC-Take advantage of Most Readily Available Power Source Reducing Installation Costs
Optional LCD Does Not Need a Separate Power Supply Lowers Installed Cost
Selectable voltage Range-Provides Flexible Choice For Changing Design or Inputs For Process/HVAC Controllers Being Used to Monitor and Control
Push button zero versus trim pot more simple zeroing provides easy install and calibration reducing installation time and possibility of operator error
Optional LCD indicator provides local status to identify operational condition
Remote sensor option reduces installation labor and material

Options

-3V 3-Way Valve Package for Chillers-LCD 4.5 Digit LCD Display-NIST NIST Traceable Certificate,Remote Sensor Available in 10 & 20 ft Shielded R1,R2,or Armored Cable R5,R6

+91-9868958924, 9650264867

E-mail us

India

Category: Series 629 Wet Differential Pressure Transmitter Wholesaler India DELHI