Cooling and Condenser Coil Manufacture From Delhi

Cooling Coil

Usage	Industrial Use
Brand	ETI
Voltage	220 V
Liquid Flow Rate	4.12-15.2 L/s
Plate Thickness	20 SWG
Tube Diameter (Inch)	3/8,1/2,5/8 inch
Maximum Working Pressure	4.0 Mpa

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

Features:

Sturdiness
Dimensionally accurate
Corrosion resistance

Coils:

They are manufactured from annealed & seamless copper tubes

Fins:

Aluminium used for fins are super slit fins. Copper tubes are hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

Header:

M. S. Seamless pipe or copper pipe of heavy gauge

Casing

End covers, top & bottom channels are manufactured of 16 gauge of g. I sheets for protection & long life
Venting & draining system: the coils require only one drain & one vent
The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

Our range includes:

Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut
This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray
Electronic Coils. Industrial Coils
Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day
Procured from genuine vendors, we use good quality of raw material in the production of our gamut
The raw material includes 1 1/2′ C class and ISI duty ERW tubes
These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

Heating Ventilation Air Conditioning Coil

Usage/Application	Decorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall
Brand	Enviro Tech Industrial Products
Surface Treatment	Mill Finish
Air volume	170m3/h~12600m3/h
Heat	2700W~18900W
Operating Voltage	230 VAC

In order to meet huge market demands, we are involved in presenting huge array of Heating Ventilation Air Conditioning Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature. We are leading Heating Ventilation Air Conditioning Coil manufacturer in DELHI.

Features:

Superlative performance
Competitive prices
Best grade materials

Thermal Oil Coil

Usage/Application	Ahu
Size	48” X 60”
Material	Stainless Steel
Brand	Enviro Tech Industrial Products
Surface Treatment	Polished
Technique	ERW

We hold the proficiency to offer a variety of Oil Thermal Coil that are extensively used in downstream of boiler bank to preheat the feed water. These products are always water tube type that has different types of tubes for different applications. Our industrious professionals precisely engineer these products as per the necessities of the clients adhering to strict quality standard.

Evaporator Coil

Application	Induction Heater, Water Heater, Boiler, Automobile
Voltage	380 V
Maximum Working Pressure	25 bar
Ref.Capacity	81544 W
Fan Dia	550 mm
Cooling Area	265 m2

We are introducing our extremely effectual range of Evaporator Coil that are made from quality mild steel that provides an outstanding durability to the product. These Evaporator Coils are offered to our customers as per the drawings provided by them. With our voluminous knowledge in the manufacturing of these Evaporator Coils, we take special care of their quality.

Salient Features:

Tube Bundle Construction
Bundle types – tube bundle or tank heaters, duty fluid, steam or tank heater
Tube pitch – inline or equilateral

Dx Cooling Coil

Usage/Application	Industrial
Voltage	330 V
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 Mpa
Maximum Operating Pressure	250 psi
Maximum Fluid Temperature	150degF

We are one of the most leading manufacturer & supplier of Dx Cooling Coil. These coils are easily available at market leading prices. It is manufactured under the strict supervision of the experts. Known for their durability and fine finish, it is widely applauded among our clientele.

Chilled Water Coil

Material	Copper
Voltage	220-380 V
Structural Form	Vertical
Condensation Forms	Air-Cooled
Liquid Flow Rate	0.1~10 M/s
Maximum Working	4.5 MPa

We are one of the prominent manufacturers of best quality coils. Our Chilled Water Coils are highly required for their good productivity. We providing top quality of chilled water coil and glycol coils made from high grade materials soured from authorized and reliable vendors in the industry. We make available these chilled water coil and glycol coils with horizontal vertical tubes. We provide our clients different sizes of these coils which are easy to install and use. Our chilled water coil and glycol coils are highly demanded for its excellent quality and durability.

Features:

Cost efficient
Reliable
Easily manageable
Long lasting.

Industrial Cooling Coils

Usage	Industrial Use
Brand	Enviro Tech Industrial Products
Fin Material	Aluminium
Tube Size	8 mm OD to 50 mm OD
Rows	Single to twelve rows
FPI	3 FPI to 12 FPI

We are a prominent entity engaged in offering the best Industrial Cooling Coil. Our procuring agents ensure that the raw material is sourced from the distinguished vendors of the markets. All our products have been able to cater to the demands of the clients owing to their attributes such as low maintenance and high durability. Precisely designed by our experienced work force using hi-tech technical machinery, these products are in compliance with the stringent parameters of the industry.

Features:

Low maintenance
Easy to install
Compact design
Less power consumption
High performance

HVAC Coil

Technique	Cold Rolled
Aluminum Foil	Hydrophilic / Bare
Copper Tube	Smooth Tube / Inner Grooved Tube
Cooling Method	Direct Cooling
Tolerance	+-1%
Fin Space	1.2 mm

In order to meet huge market demands, we are involved in presenting huge array of HVAC Coil. These Chilled Water Coils are highly appreciated amongst our clients due to their various uses in suitable applications such as for a single purpose such as heating and cooling. Moreover, the offered products are highly durable in nature.We are leading HVAC Coil manufacturer in DELHI.

Features:

Superlative performance
Competitive prices
Best grade materials

Anti Corrosive Cooling Coils

Material	Copper
Liquid Flow Rate	3~10 M3/s
Maximum Working Pressure	3 MPa
Condensation Forms	Air-Cooled
Refrigerant	Steam
Structural Form	Vertical
Heat Transfer Mode	Regenerative

We have further developed Anti Corrosive Cooling Coils which enhance our products durability and functionality. Our Anti Corrosive Cooling Coils work in industrial zones where there are lot of harmful chemical in the atmosphere.

Expansion Coils

Tube Material	Copper
Usage/Application	Industrial
Fin Material	Aluminium
Surface Treatment	Polished
Technique	Hot Rolled, Cold Rolled, etc
Steel Grade	430

We supply Direct Expansion Coil which is primarily used for the cooling and heating purpose. This coil is from 1.0 to 2.5 tons with the DX chilled water. These units are appropriate for the floor standing and ceiling suspended. Procured from genuine vendors, we use good quality of raw material in the production of our gamut. The raw material includes copper tubing, sine wave aluminum fins and has vent valve for the removal of air. For the full comfort level, the motors for the blowers have 3 speeds and the casing is fabricated with G.I sheet and powder coated. Moreover, it can be easily customized in compliance with client necessity and is delivered on time.

Double Circuit Cooling Coils

Usage/Application	Ahu
Coil Type	Copper pipe
Fin Material	Aluminium
Voltage	220 V
Tube Diameter	7 mm
Tube Thickness	0.25 mm~1.0 mm

We offer Double Circuit Fin and Tube Type Cooling Coils, used widely in heavy industries including marine motor vessels. These are designed to offer the optimum level of heating and cooling levels desired. Further, our range of cooling coils are designed to maximize heat transfer, within the constraints of air pressure drop across the cooling coil.

Air Conditioner Coils

Usage/Application	Air Condition or Refrigerator
Voltage	220-380 V
Brand	Enviro Tech Industrial Products
Tube Diameter	7.94 mm, 9.52 mm and 12.7 mm
Liquid Flow Rate	2.5 m/s
Width	90 mm

Keeping in the mind the requirements of customers, we are involved in offering best quality of Air Conditioner Coils. The Air Conditioner Coils are frequently used with furnaces in the up flow or down flow position. Further, we ensure to satisfy the entire requirements of customers at market leading prices.

Features:

As per the industry standards
Corrosion resistant

A.H.U Cooling Coils

Material	Aluminium
Frequency	50 Hz
Fin Material	Copper
Voltage	220 V
Weight	5-500 kg
Maximum Working Pressure	4.5 Mpa

We offer advanced range of A.H.U Cooling Coils for air Handling Units That Ensures Excellent Heat Transfer Capability with low Air Side Pressure Drop. These A.H.U Cooling Coils Can be Made Available From us at industry Leading Prices.

Aluminum Finned Copper Coil

Minimum Order Quantity	50 Piece
Material	Copper
Usage/Application	Air Handling Unit
Size	610 MM X 610 MM
Brand	ETIP
Pipe Material	COPPER
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Tube Diameter	1/2 INCH
Max Operating Pressure	360 psi
Max Operating Temperature	350 deg F
Casing	18 gauge galvanized steel
Coil Tube	3/8″ seamless copper tubing
Coil Area	14×14 inches

Aluminum Finned Copper Coil

Applications:

Finned Coil Water to Air Heat Exchangers Can Be Used for Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling
Dehumidification
Liquid to air and air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Quantity: 1

14×14 Finned Coil Water to Air Heat Exchanger

Applications:

Finned Coil Water to Air Heat Exchangers Can be Used For Many Heating And Cooling Applications In Both Existing And Retrofit Residential And Light Commercial Construction, Including:
Forced Air Heating: Indoor/Outdoor Furnaces, Boilers, Stoves
Chilled Water Cooling

Dehumidification

Liquid To Air And Air to liquid heat transfer in light industrial and commercial applications, etc.

Technical Specifications:

Water to Air Heat Exchanger Dimensions And Technical

Specifications (pdf)

Coil Area: 14×14 Inches
Manifold Inlet & Outlet Connections: 1″ Copper Sweat (1-1/8″ O.D.)
Coil Tube: 3/8″ Seamless Copper Tubing
Casing: 18 Gauge Galvanized Steel
Fins: 12 Fins Per Inch, Aluminum
Max Operating Temperature: 350 deg F
Max Operating Pressure: 360 psi

Condenser Coil

Usage/Application	Ahu
Weight	2.1 kg
Voltage	320 V
Tube Diameter	7mm,7.94mm ,8mm,9.52mm 12.7mm,16mm
Fin Space	1.3-5.3mm

Our range of Condenser Coil is manufactured using a high quality of raw materials which have been bought from reliable vendors and they are supplied and exported to the clients located across the globe. These coils are used for a range of applications in different products and they offer a high performance to the customers. These products have been priced at very reasonable rates and they offer a long lasting service life to the customers in the market.

Features:

Effective
High performance
Cost effective

Specifications:

CONDENSER COIL
Model No	STANDARD SIZE	COPPER PIPE SIZE
ETIP	18′ X 16′ X 4 ROW	3/8′
ETIP	14′ X 14′ X 4 ROW	3/8′
ETIP	13′ X 12′ X 4 ROW	3/8′
ETIP	13′ X 12′ X 3 ROW	3/8′
ETIP	10′ X 12′ X 3 ROW	3/8′

CONDENSER COIL
Model No	STANDARD SIZE	COPPER PIPE SIZE
ETIP	10′ X 11′ X 3 ROW	3/8′
ETIP	10′ X 11′ X 2 ROW	3/8′
ETIP	10′ X 11′ X 2 ROW	3/8′
ETIP	9′ X 9′ X 2 ROW	3/8′

Low Temperature Coils

Usage/Application	Ahu
Cooler Type	GI Sheet
Material	Copper Pipe
Brand	ETI
Fin Material	Aluminium

We are engaged in offering best quality of Low Temperature Coils, which are highly appreciated for their premium quality. These Low Temperature Coils are manufactured using high grade material and tested for their quality assurance. Further, the offered Low Temperature Coils are frequently used in various applications.

Features:

Accurate results
High tensile strength
Excellent performance

Booster Coil

Usage/Application	Ahu
Size	915×610 mm
Brand	ETI
Tube Length	3 1/8″
Flat Side Plates	9 1/8″ Casing Height)

We offer Booster Coil, which are highly appreciated, among our valued clients for its simple configuration and abrasion resistant features. These are widely used in varied industrial applications and are offered in diverse specifications, which match the complete casing of original unit.

Automobiles Air Conditioner Coil

Usage/Application	Automobiles
Tube Size	5/8″, 1/2″ ,5/8″, 20, 1″ OD
Fin Space	5-20 mm
Operating Voltage	115 VAC
Mounting	Wall / Window Mount

Our customers can avail from us inclusive range of Automobiles Air Conditioner Coil that finds widespread application in factory industry. Under the supervision of our specialist professionals, the range is manufactured using premium quality raw material and advanced machines. Our professionals also support us in customizing the robust and highly functional variety as per the exact requirements of the customers.

Direct Expansion Coils

Minimum Order Quantity	12 Number
Usage/Application	Industrial
Voltage	220-380 V
Liquid Flow Rate	0.2-1.0m/s
Brand	Enviro Tech Industrial Products
Maximum Working	15 bar

We are instrumental in offering a qualitative range of Direct Expansion Coils. The entire range is manufactured in compliance with the industrial norms and standards. Our expansion coils are offered by us in varied dimensions to meet the customers’ needs.

Features:

Water proof
High durability
Corrosion and abrasion resistance

Heat Exchanger Coils

Minimum Order Quantity	12 Square Feet
Usage/Application	Ahu
Brand	Enviro Tech Industrial Products
Voltage	220-380 V
Liquid Flow Rate	0.2-1.0 m/s
Maximum Working	15 bar

We are instrumental in manufacturing and supplying a superior quality assortment of Heat Exchanger Coils. Offered product range is involved in providing solutions for various ventilation problems for commercial and industrial establishments. These products are manufactured using high grade raw material with advanced engineering concepts by our experts. We also offer these products in various specifications detailed by our esteemed clients. clients can avail these products at highly affordable prices.

Air Handling Unit Coils

Size	96” X 14”
Material	Copper, SS, Aluminium
Brand	ETI
Thickness	1-5 mm
Shape	Rectangle

As per the requirements of customers, we are involved in presenting huge array of Air Handling Coils. The Air Handling Unit Coils are available in market at reasonable prices. These Air Handling Coils are frequently used for refrigeration, air conditioning and process. Further, the offered products are highly tested for their quality assurance. We are leading.

Features:

Conform to the safety norms
Robust
Corrosion resistant

Gas To Air Coil

Usage/Application	Ahu
Brand	ETI
Coil Efficiency	0.88%
Coil Inlet Temp	35degC
Glycol Flow Rate	224-67 kg/s

Gas To Air Coil

These Gas to Air Coil offered by us are heavy in weight and takes less preservation cost. These cooling units consume less energy and necessitate very less space to place the products. These products are traded to our consumers at wide range. These cooling units are used in various applications like generator rooms, gas turbine intakes, industrial cooling of hot spots and hot zones.

Specifications:

Connection Form: Thread
Type: Direct Acting
Material: Alloy
Pressure: Ordinary Pressure

Bend Coils

Usage/Application	Ahu
Tube Material	Copper Pipe
Brand	ETI
Fin Material	Aluminium
Extension Spring Material	Oil Tempered Spring Steel Alloy

With the years of experience, we are providing an extensive array of Bend Coils which is highly demanded by clients due to their superior quality. Also, we keep the various demands and requirements of the clients in our mind while developing the range. We offer these Bend Coils to the clients at market leading prices.

Features:

Accurate results
High tensile strength
Rust free

AC Condenser

Usage/Application	Ahu Unit
Brand	ETI
Max Working	4.0 Mpa
Fin Surface	Powder paint, Bare
Working Temperature Range	30-45 degree
Voltage	320 V
Liquid Flow Rate	4.12-15.2 L/s

Being the leading names in the industry, we are manufacturing an extensive range of AC Condenser.

Features:

Excellent functionality
Precisely designed
High efficiency

Refrigeration Coils

Usage/Application	Refrigeration
Material	Copper
Brand	Enviro Tech Industrial Products
Fin Material	Aluminium
Voltage	380-420 V
Frequency	50 Hz
Phase	3 PH
Test Pressure	2.8 Mpa

To meet huge market demands, we are engaged in offering utmost quality of Refrigeration Coils. These Refrigeration Coils are manufactured by our professionals using high grade material and advance technology. Further, the Refrigeration Coils are frequently used in number of applications. Our products are of world class quality.

Features:

High performance
Most reasonable prices
Long functional life

Specifications:

Condensation Forms: Water-Cooled
Type: Steam Condenser
Material: Copper

Heating Coils

Power Source	Electric
Brand	ETI
Usage/Application	Industrial
Voltage	280 V
Thickness	0.6-3 mm
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 Mpa

Captivating the skills of our professionals, we are involved in offering utmost quality of Heating Coils. The offered Heating Coils are extensively used in variety of light commercial applications. Further, we ensure to provide unmatchable quality products to customers and satisfy their entire requirements in all manners.

Features:

Best grade materials
High performance
Long functional life

Ammonia Cooling Coils

Brand	ETI
Usage/Application	Industrial
Voltage	380 V
Capacity	Up to 50 tonne ice capacity per day
Material	Copper, Stainless Steel, Mild Steel, MS plate, 1 1/2′ C class and ISI duty ERW tubes
Frequency	50 Hz

We are offering Ammonia Cooling Coils that are manufactured as per the international quality standards. Finest quality material such as MS plate, 1 1/2′ C class and ISI duty ERW tubes are used in the manufacturing process. Our product-line is appropriate for an ice plant that has up to 50 tonne ice capacity per day and are available in various specifications as per the industrial standards. Furthermore, we offer these products to clients in a spectrum of specifications at incomparable prices.

Features:

Outstanding performance
Sturdy
Durable

Hot Water Coil

Brand	ETI
Application	Boiler, Induction Heater, Water Heater, Automobile
Fin Space	1.0-8.0 mm
Fin Type	Flat fin, Window fin, louver fin, Smooth sine wave fin
Tube O.D.	7mm. 7.94mm, 9mm, 9.52mm, 12.75mm, 15.88mm

The range of products which we supply and manufacture to the customers are inclusive of an excellent range of Hot Water Coil which are used with the hot water, steam and with the glycol solutions and they comprise of thick tube walls, continuous circuit tubes with return bends and strong brazed joints. These products offer a high performance to the customers and they have been made using a high quality of steel. Our products are non-corrosive and they are very affordable.

Features:

Durable
High performance
Trouble free operation

Cooling Coils

Brand	ETI
Usage/Application	Industrial
Voltage	330 V
Liquid Flow Rate	4.12-15.2 L/s
Maximum Working Pressure	4.0 MPa

A wide assortment of Cooling Coils is provided by us to clients at market leading prices. These Cooling Coils are extensively used with furnaces in the vertical position and in many other suitable applications. Further, we ensure to provide best quality products to clients and satisfy their entire requirements and needs.

Features:

Accurate results
Excellent performance
Rust free

Copper Coil

Material	Copper
Size	3/8 INCH, 1/2 INCH,5/8 INCH
Brand	ETI
Pressure	Medium Pressure
Usage/Application	Industrial

We are involved in the manufacture and export of high-quality Copper Coil for our esteemed clients. The base tube of these coils as well as their fin material is made of Copper. These coils help to increase the surface area of the tubes and improve the overall heat transfer efficiency. These coils are highly demanded by our clients for being light-weight, economic and corrosion-resistant.We are leading Copper Coil With Copper Fins manufacturer in DELHI.

Features:

Corrosion-resistant
Light-weight
Economically priced
Improves the overall heat-transfer efficiency

Industrial Steam Coils

Power Source	Electric
Usage/Application	Water Heater
Material	Brass
Brand	Enviro Tech Industrial Products
Copper Pipe	1/2 INCH
Pressure	Ordinary Pressure

We offer steam coils which are highly appreciated among our valued clients for its simple configuration and abrasion resistant features. These are extensively used in varied industrial applications and are offered in varied specifications, which match the entire casing of original unit.

These heating coils are primarily used in:

Steam
Water pre heat
Re heat
Boosters

Copper Fin Tube Coils

Fin Material	Copper
Tube Material	Copper plain, inner grooved surface
Brand	Enviro Tech Industrial Products
Tube Size	5/8″ , 1/2″ , 3/8″
Fin	0.12 mm , 0.16 mm Thick
Max Length	3 mtr
Max Width	1 mtr

Being an eminent company, we are engaged in offering best quality of Copper Fin Tube Coils. These Coils are extensively used in various suitable applications. Moreover, the Copper Coils are offered by us at market leading prices. Customers can avail these Coils in different sizes.

Features:

High durability
Competitive prices
Best grade materials

Heat Transfer Coil

Power Source	Electric
Size	915 mm X 915 mm
Application	Decorations, Heat Sink, Transportation Tools, Door & Window, Glass Wall, Automobile
Surface Treatment	Mill Finish
Brand	Enviro Tech Industrial Products
Coils Size	1/2″ and 3/8″, 5/8″

Heat Transfer Coil We are offering heat transfer coil. All types of coils with 1/2” and 3/8”,5/8”. For commercial and industrial applications. these include water, steam, evaporator, condenser & custom coils. our capacities extend past normal 60,000 sq. Ft. Of coils per month. very few can compete with zeco in areas of quality, response time and value.

Steam Coil

Brand	ETI
Material	Copper
Application	Induction Heater, Water Heater, Boiler, Automobile
Voltage	24 V
Tube Type	Smooth, Grooved
Maximum Working	40 bar
Liquid Flow Rate	19-100 m3/h

We are presenting a qualitative range of Steam Coil to our customers. These Coils can be produced with a diversity of casings and headers to withstand extreme pressure tolerances. We also custom design these circuits and manifolds that enables our clients to exploit their application competence. Moreover, our experts manufacture a top of the line steam coil designed specially for our clients needs.

Condensers Chillers

Material	SS
Weight	1-10 ton
Brand	Enviro Tech Industrial Products
Voltage	220-415 V
Cooling Method	Water-cooled

Leveraging on our vast industry experience, we are providing a broad array of Condensers Chillers. The offered chillers are manufactured by the use of finest grade components along with contemporary techniques at our well-established production unit. Owing to its supreme functionality and excellent chilling capability, these chillers are widely appreciated by our clients. Apart from this, clients can avail these chillers from us at the nominal price.

Features:

Supreme performance
Excellent efficiency
Optimum functionality

Chillers Condenser

Minimum Order Quantity	1 Number
Material	SS
Brand	Enviro Tech Industrial Products
Usage/Application	Industrial Use
Power Source	Electric
Finish	Color Coated

This is accurately developed Chillers Condenser that is used in commercial domain. The talented professionals design and develop these assortments of products using state-of-the-art technology and components. Patrons admire these products for their best quality and satisfactory performance. Additionally, customers can receive presented products at budget friendly prices.

Features:

High strength
Long life
High performance

Blue Fin Coil

Material	SS, MS, Aluminium, Copper
Brand	ETI
Application	Induction Heater, Water Heater, Automobile
Tube Diameter	7-50 mm
Tube Thickness	1-3.5 mm

Leveraging over the skills of our qualified team of professionals, we are instrumental in offering wide range of Blue Fin Coil.

Features:

Optimum performance
Shock proof
Perfect designs

Heat Exchanger

Usage/Application	Paper and Pulping Industry
Medium Pressure	1.6MPa-10.0MPa
Surface	450 Sqm
Dimension	W2500H2500Length 4000 mm
Power	8-500 kW

Steam Heating Radiator in Stainless Steel Pipe MS and in Copper Pipe With Aluminum Fins of Different Sizes For Tumble Dryer.

Cooling Tower PVC Fills Manufacture From India

Honeycomb P.V.C. Fills

Minimum Order Quantity	1000 Number
Shape	Rectangle
Size	600mm x 300mm x 150mm
Color	Blue
Brand	Enviro Tech Industrial Products
Usage/Application	Cooling Tower
Sheet Thickness	0.2 to 0.25 mm
Fill Flute Height	12mm to 19mm

We are a trusted name in manufacturing a comprehensive range of Honeycomb P.V.C. Fills which are continuously vacuum formed. These are superior in quality in terms of durability, user-friendliness and maintenance.

Some essentials features are:

These are specially treated to offer maximum contact area for heat exchange.
In it, the crossing of air and water streams is in close proximity
The proximity creates a diffused turbulence which is conducive to evaporation and efficient heat transfer.

Specifications:

Rigid Poly Vinyl chloride (PVC)
Honey comb design with double edge folded very large contact surface area

Black Honeycomb PVC Fills

Minimum Order Quantity	1000 Number
Material	PVC
Shape	Rectangle
Color	Black
Brand	ETI
Fill Size	600mm x 300mm x 150mm
Sheet Thickness	0.2 to 0.25 mm
Fill Flue Height	12mm to 19mm

Our qualitative range of Black Honeycomb PVC Fills are continuously vacuum formed.

These are long lasting, resistant to rugged environment, simple and sturdy in construct. Some essentials features are:

Specially treated to offer maximum contact area for heat exchange.
The crossing of air and water streams is in close proximity
The proximity develops a diffused turbulence which is conducive to evaporation and efficient heat transfer.

Specifications:

Rigid Poly Vinyl chloride (PVC)
Honey comb design with double edge folded very large contact surface area

Cooling Tower PVC Fill

Minimum Order Quantity	1000 Number
Material	PVC
Color	Black, White, Blue
Brand	Enviro Tech Industrial Products
Standard type of PVC fills	600mmx300mmx150mm
PVC honey combs.	25mm {12. 5 + 12. 5}.
Corrugation pitch.	2. 8 mm.
Corrugation depth	3 mm
Thickness of finished fills.	0. 30 mm
Weight of std. Fills.	800 gm to 1 kg.

We have emerged as the foremost manufacturer, trader, exporter and supplier of Cooling Tower PVC Fill. The offered pad is treated with stiffening and wetting agents to provide the cooling without any water carryover. Our quality controllers stringently check the entire range to ensures its superior performance. Apart from this, client can avail this pad from the market at most feasible price.

Features:

Lower operating cost
Comfortable habitation
Higher productivity
No water carry-over
Strong and self supporting
Dirt resistant
Low maintenance

Specifications:

Technical details of our PVC fills.
Standard type of PVC fills.	600mmx300mmx150mm
PVC honey combs.	25mm {12. 5 + 12. 5}.
Corrugation pitch.	2. 8 mm.
Corrugation depth	3 mm
Spiral angles.	21
No of PVC sheets per 150 mm width	12
Heat transfer area/cu. Ft. Of fills volume	1 cu. Ft.
Thickness of finished fills.	0. 30 mm
Heat distortion temp. For normal PVC	60 º c
For high grade.	80 º c { up to 120 º c }
Weight of std. Fills.	800 gm to 1 kg.

The evaporative cooling pad is cellulose material impregnated with insoluble anti-rot salts and rigidify saturates.
The material has spatial crossing linking technology with high absorb ability.
It is water resistant, anti-mildew and has a long service life.

Some of the applications of our cooling pads are:

Comfort cooling
Vegetable storage
Mushroom farming
Seed farming
Dairy farms

Blue Honeycomb PVC Fills

Minimum Order Quantity	1000 Number
Material	PVC
Shape	Rectangle
Size	610 X 305 X 150 mm
Color	Blue
Brand	ETI
Fill Flute Height	12mm to 19mm
Sheet Thickness	0.2 to 0.25 mm

Our qualitative range of Blue Honeycomb PVC Fills are continuously vacuum formed. These are long lasting, resistant to rugged environment, simple and sturdy in construct. Some essentials features are: Specially treated to offer maximum contact area for heat exchange. The crossing of air and water streams is in close proximity The proximity develops a diffused turbulence which is conducive to evaporation and efficient heat transfer. Specifications: Rigid Poly Vinyl chloride (PVC) Honey comb design with double edge folded very large contact surface.

PVC Evaporate Cooling Pad

Minimum Order Quantity	1000 Number
Color	Blue
Material	PVC
Usage/Application	Cooling Tower
Brand	ETI
Weight	600 G
Shape	Rectangle
Height	6 mm, 12 mm, and 19 mm
Sheet Thickness	1 mm and 1.2 mm

The fill is of rigid ploy vinyl chloride (PVC) and is of Honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the air washer & tower casing without any cutting for curves. The air pressure drop through the fill is negligible. The fills are available with flute height of 6mm, 12mm, and 19mm with sheet thickness of 1mm and 1.2mm.

Double Edge Fold Fills

Minimum Order Quantity	1000 Number
Material	PVC
Usage/Application	Cooling Tower
Color	Blue
Brand	Enviro Tech Industrial Products
Shape	Rectangle
Driven Type	Electric

To gain strong foothold in this industry, we are devoted toward offering a wide gamut of Double Edge Fold Fills. Only high quality raw material is used while manufacturing the offered range, for increased compliance with international standards of quality. The offered range is highly appreciated among clients for its excellent and sturdy design. Apart from this, our range is offered in various sizes and can be customized, as per precise needs of our clients at highly competitive prices.

Features:

Sturdiness
Excellent quality
Durability

Cooling Tower FRP Fills

Material	PVC
Size	600 X 300 X 150 mm
Usage/Application	Cooling Tower
Color	Blue, Black
Brand	ETI
Weight	610 G
Shape	Rectangle

With the extensive knowledge and experience in this respective domain we are engaged in offering high quality Cooling Tower FRP Fills,that are made by our by us using superior quality raw material.Addition to this, range that we offer is stringently inspected before dispatching it to the clients’ end.

PVC Fills Ball Type

Minimum Order Quantity	1000 Number
Size	2 INCH
Color	Black
Material	PVC
Moulded Parts Type	COOLING TOWER
Brand	Enviro Tech Industrial Products
I Deal In	New Only
Usage	Commercial
Thickness	1.0 mm

PVC Fills Ball Type

We Are The Supplier Of FRP & FRP Cooling Tower PVC Fills Ball Type. These Cooling Tower PVC Fills are widely used for Transferring Heat From Hot Water Without An Increase In The Energy Consumption Of The Fan.

PVC Fills Media

Minimum Order Quantity	1000 Number
Material	PVC
Usage/Application	Water Treatment, Cooling Tower
Color	Black, Blue
Sheet Thickness	0.2 to 1 mm
Brand	ETI
Size/Dimensions	610 X 305 X 150 mm
Motive Force	Gravity

Super plast offers a wide range of edge PVC Fills Media product to meet your specific applications in all sizes and color.These fills have been successfully deployed in various industries including humidification,effluent treatment,power,petrochemical,refining,paper chemical,steel and others.

HIP Fill

Minimum Order Quantity	500 Number
Material	PVC
Usage/Application	Cooling Tower
Color	Blue
Brand	Enviro Tech Industrial Products
Shape	Rectangle
Cooling Method	Cross Flow
Air Contact Form	Wet

The HIP Fills offered by us are designed to meet the specific cooling requirements of most Cooling Towers. The economical and efficient HIP Fills have longer functionality and are specially treated to cover maximum area for heat exchange.

ABS Fills

Minimum Order Quantity	10 Number
Material	ABS
Usage/Application	Cooling Tower
Color	White
Brand	Enviro Tech Industrial Products
Maximum Load	80degC both
Ventilation Mode	Mechanical Ventilation
Cooling Method	Cross Flow, Direct Cooling

High temperature fills are made from virgin materials & strength are almost double than any other fills. Generally used for dg set water, maximum load 80°c both side folded & work in any location.

Virgin PVC Fills

Material	PVC
Usage/Application	Cooling Tower
Color	White
Brand	Enviro Tech Industrial Products
Shape	Rectangle
Ventilation Mode	Mechanical Ventilation
Cooling Method	Counter Flow

We are an illustrious manufacturer and supplier of precisely fabricated and designed a quality-assured array of Virgin PVC Fills. Made obtainable in several finishing and sizes, these products are designed employing optimum-quality raw material which is been acquired from one of the certified vendors of the market. The complete range is checked for its quality and faultlessness before handing over to the patrons.

Features:

Easy to install
High efficiency
Reliable performance

Recycled PVC Fills

Material	PVC
Usage/Application	Cooling Tower
Color	Blue, Black
Brand	Enviro Tech Industrial Products
Weight	600 g
Fills Shape	Rectangle

Utilizing the most contemporary technology and modern machinery, we have come up with an extensive collection of Recycled PVC Fills. These products are specifically designed and developed in adherence with the set industry standards and norms at our innovative production unit. Highly used in domestic as well as industrial sectors, our offered product is quality checked in varied quality parameters under the command of our quality inspectors. We offer them at highly inexpensive rates.

Features:

Low maintenance
Easy to install
Highly durable

Specifications:

Characteristics	Units	ETIP – 1	ETIP – 2	ETIP – 3	ETIP – 4	ETIP – 5
Cooling Tower Application	Air Washer	Counter flow	Counter flow	Counter flow		Cross flow
Flute Height	mm	8	12	19	27	19
Longitudinal pitch	mm	25	38	50	75	50
Spiral angle	° (degree)	11/01/79	28	28	28	11/79
Std. Sheet size L x W	mm x mm	600 x 300	600 x 300	1200 x 600	600 x 600
Max Recommended Fill Sheet size L x W	mm x mm	600 x 600	1800 x 600			1930* x 600* – composite form
Surface area per unit volume	M²/m³ ft²/ft³	375 115	250 76	158 48	120 36	158 48
Maximum continuous Operating temp.	°C °F	55 131	55 131	55 131	55 131	55 131

PVC Fills Standard

Size	600 mm x 300 mm x 150 mm
Material	PVC
Usage/Application	Cooling tower
Color	Blue, Black
Size/Dimensions	600 mm x 300 mm x 150 mm
Sheet Thickness	0.25 mm
Brand	Enviro Tech Industrial Products
Weight	600 g

Owing to the immense experience and a competent team of experts, we are able to offer Pvc Fills Standard to respectable clients. These PVC Fills offered by us are made utilizing high grade raw material, which is sourced from trustworthy vendors of the market. In addition to this, the offered range of PVC Fills is applicable in humidification, effluent treatment, power, petrochemical, refining, paper chemical, steel and allied industries. This PVC Cooling Tower Fills is known for distributing the liquid and gas across the many interconnected channels within the surface material. For inducing highly turbulent mixing between the water and the air, which increases heat and moisture transfer, cross fluted designs is introduced.

Features:

Light weight
Fire safe

Decay proof
Mass transfer & heat transfer coefficient
Low pressure drop

Honey Comb Panels Cooling Tower PVC Fills

Color	Blue
Material	PVC
Sheet Thickness	0.2 to 0.25 mm
Shape	Rectangle
Size	600mm x 300mm x 150mm
Fill Flute Height	12mm to 19mm

We are a trusted name engaged in manufacturing a comprehensive range of Honey Comb Panels Cooling Tower which are continuously vacuum formed. These are superior in quality in terms of durability, user-friendliness and maintenance.

Some essentials features are:

These are specially treated to offer maximum contact area for heat exchange.
In it, the crossing of air and water streams is in close proximity
The proximity creates a diffused turbulence which is conducive to evaporation and efficient heat transfer.
Rigid Poly (PVC)
Honey comb design with double edge folded very large contact surface area

Cooling Tower Fills

Minimum Order Quantity	1000 Number
Material	PVC
Usage/Application	Cooling Tower
Color	Blue
Size/Dimensions	610 X 300 X 150 mm
Brand	Enviro Tech Industrial Products
Shape	Rectangle

Our company is involved in the manufacturing of Cooling Tower Fills, which are an essential component of all Cooling Towers.

The fills are used for extended contact area having a high heat transfer efficiency.

Heat Exchange PVC Fill

Size	600 X 300 X 150 mm
Color	Black, Blue
Material	PVC
Sheet Thickness	0.25 mm
Weight	650
Brand	ETI

The Heat Exchange PVC Fill offered by us are designed to meet the specific cooling requirements of most Cooling Towers. The economical and efficient HIP fills have longer functionality and are specially treated to cover maximum area for heat exchange.

PVC Fills Media

Minimum Order Quantity	1000 Number
Material	PVC
Sheet Thickness	0.2-0.55 mm
Color	Blue
Weight	610 G
Brand	Enviro Tech Industrial Products
Shape	Rectangle

Enviro Tech Industrial Products offers a wide range of edge PVC Fills Media product to meet your specific applications in all sizes and colour.These fills have been successfully deployed in various industries including humidification,effluent treatment,power,petrochemical,refining,paper chemical,steel and others…

Heat Exchange PVC Fills

Minimum Order Quantity	1000 Number
Material	PVC
Color	Blue, Black, White
Shape	Rectangle
Temperature	80-100
Model No.	Enviro Tech Industrial Products
Thickness	150 mm
Brand	Enviro Tech Industrial Products

Heat Exchange PVC Fills

The Heat Exchange PVC Fill offered by us are designed to meet the specific cooling requirements of most Cooling Towers. The economical and efficient HIP fills have longer functionality and are specially treated to cover maximum area for heat exchange.
Specifications:Cooling
Method: Cross FlowVentilation Mode: Natural VentilationMaterial: PVCAir Contact Form: Wet and Dry

Drift Eliminator PVC Fills

Minimum Order Quantity	1000 Number
Shape	Rectangle
Material	PVC
Color	Blue
Brand	Enviro Tech Industrial Products
Weight	600 G
Size	600 X 300 X 150 mm
Thickness	150 mm

Matching up with the increasing demands of our customers, we are highly engaged in providing a highest quality array of Drift Eliminator PVC Fills.

Polyvinyl Chloride Fills

Minimum Order Quantity	1000 Number
Size	600 X 300 X 150 mm
Material	Polyvinyl
Sheet Thickness	0.25mm-0.35mm
Moulded Parts Type	Cooling Tower
Color	Black, Blue
Weight	600 G
Packaging Type	1
Brand	Enviro Tech Industrial Products
I Deal In	New Only
Dry Weight	600 G
Usage/Application	COOLING TOWER
Shape	Rectangle

Polyvinyl Chloride Fills

We Are One Of The Prominent Names to offer a Wide Array Of Polyvinyl Chloride Fills That Are Highly Appreciated and Demanded by our clients. Offered Spectrum of Fills is Manufactured From Optimum Grade Quality Fabrication Material and Advance Methods of Production Under The Assistance of Highly Experienced Professionals. These Products Aare Strictly Designed as per the predefined quality control measures that are why ensuring high quality.

Features:

Various sizes
Durability
Low maintenance

Specifications
Fills Flute Height: 12 mm to 19 mm

Sheet Thick: 0.2 to 0.25 mm
Fill Size: 600 mm x 300 mm x 150 mm
Color: Blue
Material: PVC
Temperature: -35°C – 60°C

Accessories

Cooling Tower Fan Hub

Minimum Order Quantity	1 Number
Material	Chrome Steel
Usage/Application	Cooling Tower
Size/Dimensions	200 mm
Brand	Enviro Tech Industrial Products
Surface Finishing	Polished
Tolerance	P4

Outfitted with a modern infrastructure, we are the most prominent manufacturer, trader, exporter and supplier of a wide array of Cooling Tower Fan Hub. The offered hub is designed using premium quality raw material and is ideal for cooling towers. Before final dispatch, the offered hub is stringently checked at various quality parameters in order to provide a flawless range at clients’ end.

Features:

Rugged design
Anti-corrosive
Durable strength

Pipe Bond Blue PVC Fills

Minimum Order Quantity	1000 Number
Color	Blue
Shape	Rectangle
Size	600 mm X 300 mm X 150 mm
Weight	600 G
Material	PVC
Brand	ETI

Owing to the immense experience and a competent team of experts, we are able to offer Pipe Bond Blue PVC Fills to respectable clients. These PVC fills offered by us are made utilizing high grade raw material, which is sourced from trustworthy vendors of the market. In addition to this, the offered range of PVC fills is applicable in humidification, effluent treatment, power, petrochemical, refining, paper chemical, steel and allied industries. This PVC Cooling Tower Fills is known for distributing the liquid and gas across the many interconnected channels within the surface material. For inducing highly turbulent mixing between the water and the air, which increases heat and moisture transfer, cross fluted designs is introduced.

Features:

Light weight
Fire safe
Decay proof

Cooling Tower Fills Double Fold Filter

Minimum Order Quantity	250 No
Material	PVC
Usage/Application	COOLING TOWER
Color	Blue
Size/Dimensions	600 MM X 300 MM X 150 MM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Material Grade	PVC
I Deal In	New Only

Cooling Tower Fills Double Fold Filter

We Offer High Quality Cooling Tower Fills Double Fold. Water Cooling Tower Is Used To Remove Extra Heat To The Atmosphere Using Evaporation Or Naturally Existing Air. They Are Also Used For Cooling The Water, Which Is Circulated In Various Industries Like Chemical, Oil Refineries, Etc. Our Cooling Towers Are Manufactured Conforming To The Norms Of The Approved Standards. Our Cooling Towers Are Highly Efficient And Durable.

Cooling Tower Pad

Minimum Order Quantity	500 Number
Usage/Application	COOLING TOWER
Color	Blue
Width	600 MM X 300 MM X 150 MM
Brand	ENVIRO TECH
Cooler Body Material	Plastic
Weight	600 G
Country of Origin	Made in India

Cooling Tower Pad

We Are An Acclaimed Name Engaged In Offering Our Precious Clients Superior Quality Cooling Tower Pads. Moreover, We Provide This Tower Pad in Various Dimensions And Finishes At Rock Bottom Prices.

Features:

Lower operating cost
Comfortable habitation
Higher productivity
No water carry-over
Strong and Self Supporting
Dirt Resistant
Low Maintenance

Specifications:

Technical details of our PVC fills.
Standard type of PVC fills.	600mmx300mmx150mm
PVC honey combs.	25mm {12. 5 + 12. 5}.
Corrugation pitch.	2. 8 mm.
Corrugation depth	3 mm
Spiral angles.	21
No of PVC sheets per 150 mm width	12
Heat transfer area/cu. Ft. Of fills volume	1 cu. Ft.
Thickness of finished fills.	0. 30 mm
Heat distortion temp. For normal PVC	60 º c
For high grade.	80 º c { up to 120 º c }
Weight of std. Fills.	600 gm.

Blue Cooling Tower Pad

Minimum Order Quantity	1000 Number
Usage/Application	COOLING TOWER
Type Of Parts	COOLING TOWER
Color	Blue
Width	600 MM X 300 MM X 150 MM
Brand	ENVIRO TECH
Cooler Body Material	Plastic
Weight	600 G
Country of Origin	Made in India

Blue Cooling Tower Pad

We Are An Acclaimed Name Engaged In Offering Our Precious Clients Superior Quality Blue Cooling Tower Pads. Moreover, We Provide This Tower Pad in Various Dimensions And Finishes At Rock Bottom Prices.

Features:

Lower Operating Cost
Comfortable Habitation
Higher Productivity
No Water Carry Over
Strong And Self Supporting
Dirt Resistant
Low Maintenance

Specifications:

Technical Details Of Our PVC Fills.
Standard Type Of PVC Fills.	600 MM X 300 MM X 150 MM
PVC Honey Combs.	25 MM {12. 5 + 12. 5}.
Corrugation Pitch.	2. 8 MM.
Corrugation Depth	3 MM
Spiral Angles.	21
No of PVC Sheets Per 150 MM Width	12
Heat Transfer Area/Cu. Ft. Of Fills Volume	1 cu. Ft.
Thickness Of Finished Fills.	0. 30 MM
Heat Distortion Temp. For Normal PVC	60 º c
For High Grade.	80 º c { up to 120 º c }
Weight Of Std. Fills.	600 GM.

White Honeycomb PVC Fills

Minimum Order Quantity	1000 Number
Material	PVC
Shape	Rectangle
Size	610 X 300 X 150 mm
Color	White
Brand	Enviro Tech Industrial Products

Our qualitative range of White Honeycomb PVC Fills are continuously vacuum formed. These are long lasting, resistant to rugged environment, simple and sturdy in construct.

Some essentials features are:

Specially treated to offer maximum contact area for heat exchange.
The crossing of air and water streams is in close proximity
The proximity develops a diffused turbulence which is conducive to evaporation and efficient heat transfer.

Specifications:

Rigid Poly Vinyl chloride (PVC)
Honey comb design with double edge folded very large contact surface area

PVC Fills

Minimum Order Quantity	500 Number
Shape	Rectangle
Color	Blue, White, Black
Material	PVC
Brand	Enviro Tech Industrial Products
Usage/Application	Cooling Tower

Owing to the immense experience and a competent team of experts, we are able to offer PVC Fills to respectable clients. These PVC fills offered by us are made utilizing high grade raw material, which is sourced from trustworthy vendors of the market. In addition to this, the offered range of PVC fills is applicable in humidification, effluent treatment, power, petrochemical, refining, paper chemical, steel and allied industries. This PVC Cooling Tower Fills is known for distributing the liquid and gas across the many interconnected channels within the surface material. For inducing highly turbulent mixing between the water and the air, which increases heat and moisture transfer, cross fluted designs is introduced. Features Light weight Fire safe Decay proof Mass transfer & heat transfer coefficient Low pressure drop Specifications Cooling Method Cross Flow Material FRP Air Contact Form Wet Tower Shape Square Noise Level Low

Lps Ball Type Fills

Minimum Order Quantity	5000 Number
Usage/Application	Commercial
Color	Black
Size/Dimensions	2*2 inches
Brand	Enviro Tech Industrial Products
Material	PP

As an important entity of this domain, we provide the handpicked quality of LPS Ball Type Fills. For manufacturing of these ball fills, we make use of latest technology and machinery.

Features:

Thermal stability
Sturdy construction
Durability
Compact design
Impeccable finish
Dimensional accuracy

Drift Eliminator

Color	Blue
Brand	ETI
Diameter	600X600X120 mm
Material	PVC
Shape	Rectangle

We are one of the prominent manufacturers and suppliers of the Drift Eliminator, fabricated from the high grade of raw materials procured from reliable vendors. The product is highly acclaimed for the various features such as durability, reliability and perfect functioning. The Eliminator is of rigid PVC and is of fixed type having bare minimum water carry over losses.

Uses:

Reduces Carry over loss of water

Trickling Filter Media

Minimum Order Quantity	500 Number
Usage/Application	Air Filter
Color	Black
GSM	250-300
Material	PVC
Diameter	14.5*9.8 mm

Trickling Filter Media are very light in weight, easy to handle, and have Long time working capability. Plastic Random Packing materials are tower packing apparatus made of the plastics and polyethylene. They are heat-resistant, chemical and corrosion-resistant. We are offering them in lots of beautiful colors. It has a fixed setting for rolling. They are used for public places and entertainment purpose.

Features:

Handles wide range of hydraulic loading rates
Excellent for BOD Reduction
No channels or dead spots
Provides high Bio Surface Area
Random Dumping
Low minimum wetting rate
Longer Media Life
Extremely easy to install

Application:

Increase surface area
Used where waste water is generated

Mist Eliminator

Material	FRP/PVC
Brand	Enviro Tech Industrial Products
Color	Blue
Wire Diameter	0.07 – 0.5 mm
Packaging Type	Roll

We offer a wide range of Mist Eliminator, that are made of FRP/PVC, the eliminator is used to reduce water losses due to entertainment of moisture drops in the air stream. We also offer these as per our customers’ requirements & specifications.

PVC Fillers

Minimum Order Quantity	200 No
Color	Blue
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Size	600 MM X 300 MM X 150 MM
Shape	RectangleBlue, White, Black

PVC Fillers

Thermoplastic Elastomer Are a Unique Class of Engineering Materials Which Combine The Look, Feel And Elasticity Of Conventional Thermo Set Rubber With Processing Efficiency Of Plastics.
TPE’s Melt Process Ability Makes Them Very Suitable For High Volume Injection Molding And Extrusion. TPE Offer Vide Range Of Durometer, Low Compression Set And High Elongation.

Sigma Type PVC Fill

Sheet Thickness	0.32 mm
Material	PVC
Color	Black
Size	6′ X 3′
Brand	ETI
Corrugation Height	19 mm

Sigma Type PVC Fill

Over the years of experience in the industry, we have been able to provide the customers with a comprehensive assortment of Sigma Type PVC Fill. The offered range is widely used for transferring heat from hot water, without increasing the power need of the fans. Our range is widely used in varied industrial sectors such as effluent treatment, paper, steel, petrochemical, power, steel and other similar areas. We offer the range in following sizes64″ x 24″ (1600 mm x 600 mm)72″ x 24″ (1800 mm x 600 mm)72″ x 36″ (1800 mm x 900 mm)Some of the finest features of the range areLow pressure dropFire resistantDecay proofLight weightHigher mass heat transfer coefficientSpecificationsTower ShapeSquareNoise LevelLowApplication FieldsIndustrial

PP LPS Glass Type Fills

Minimum Order Quantity	5000 No
Material	PP
Color	White and Black
Usage/Application	LPG
Shape	Round
Brand	ETI
Size/Dimensions	4 inch

Since the inception of our company, we provide the handpicked quality of PP LPS Glass Type Fills. Known for their sturdy construction and easy installation, these products are manufactured by using modern machinery.

Features:

Simple installation
Compact design
Impeccable finish
Rugged construction
Sturdy construction
Durability

Cooling Tower Motor

Voltage	280 V
Speed (Rpm)	1440 rpm
Phase	Three Phase
Motor Brand	Enviro Tech Industrial Products
Frequency	50 Hz
IP Rating	IP 55
Power (Watts or HP)	3 HP

We have marked a distinct and dynamic position in the market by providing a high quality array of Cooling Tower Motor with unique features and state-of-the-art design combined with economy, reliability and efficiency. Under the strict vigilance of our adroit personnel, the offered motors are manufactured using premium quality anti corrosive components and sophisticated technology. Furthermore, we offer these motors to our prestigious clients at reasonable prices.

Features:

IP – 55 weatherproof design
Specially extended shaft
EN8 steel frame facing downward for mounting on top of the cooling tower Air conditioning, showroom, shopping mall, restaurant & bar, hotels, office, call center, building, schools, studio, institute, hospital, Pharmacy Company, clean room, etc.

Sigma Cooling Tower Fills

Material	PVC
Usage/Application	Industrial
Color	Black
Brand	ETI
Shape	Rectangle

Our company is involved in the manufacturing of sigma fills, which are an essential component of all marley, paharpur cooling towers. The fills are used for extended contact area having a high heat transfer efficiency.

Cooling Tower Sprinkler With Distribution Pipe

Material	ABS
Usage/Application	Irrigation
Capacity	Less than 50 L
Brand	Enviro Tech Industrial Products
Sheet Thickness	5 mm

We are an eminent entity engaged in offering an extensive range of Cooling Tower Sprinkler with Distribution Pipe. Highly acknowledged in the market, our offered sprinkler is in line with the international quality standards. Easy to use and install, provided sprinkler is manufactured using high grade raw material and modern technology. Furthermore, to fulfill the requirements of our esteemed clients we provide this product in customized options.

Features:

Impeccable design
High strength
Larger wet zone

Rotary sprinkler system:

It is a PVC pipe sprinkler system having graded holes for uniform distribution of water.
Its features are die-cast aluminum alloy body and up to 15 ft. sweep diameter with 4, 6, 8 pipes.

Header system:

It is a hot dip galvanized / P.V.C. branched distribution system.
Its specification includes:
PVC/ S.S./ Chrome plated brass nozzles in sizes, from ½” to 3”

Cooling Tower Fan

Material	Aluminium
Usage/Application	Commercial
Brand	Enviro Tech Industrial Products
Diameter	1200 mm
No of Black	6

Over the years, we have been engaged in offering a quality assured collection of Cooling Tower Fan with utmost quality. Our skilled professionals manufacture this fan using innovative technology and high grade non-conducting components in compliance with set industry standards. Our provided fan finds its wide applications in oil refineries, power plants, petrochemical plants, natural gas plant and other similar industrial facilities. According to various expectations of clients, the offered fan is available in various models to fulfill their requirements.

Features:

Energy efficient
Excellent surface finish
Corrosion-resistance

Specifications:

An aero-dynamically axial flow type fan is well balanced Construction.
The fan blades are of case aluminum Alloy, fan with variable pitched blades is dynamically balanced for low vibration and high efficiency.

Applications:

Cooling Towers
Humidification Towers
Air Washers
Fin Fan Coolers.
Cooling Towers Fan

Cooling Tower Sprinkler

Material	ABS,Aluminum alloy, SS
Usage/Application	Industrial
Brand	Enviro Tech Industrial Products
Material Grade	SS304, SS316
Working Pressure	0.2-6 Bar

We take pleasure to introduce ourselves as one of the renowned manufacturer, trader, exporter and supplier of Cooling Tower Sprinkler. As per defined industry parameters, offered sprinkler is manufactured by skilled professional using premium quality raw material and modish technology. Extensively used in several irrigation process, our offered sprinkler is widely appreciated and demanded in the market. Additionally, we provide it in various dimensions at leading market prices.

Features:

Uniform water supply
Portable design
Easy installation

Polypropylene Ampullar Type Nozzles

Product Details:

Minimum Order Quantity	250 Number
Material	PP

Polypropylene Ampullar Type Nozzles

Humidification & Ventilation Equipment – Cellulose Paper Pad

Water Cooler Pad

Minimum Order Quantity	100 Number
Material	Cellulose
Usage/Application	Air Wesher Unit
Type Of Parts	Water Cooler Pad
Color	Blue
Width	600 MM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India
Features	High durable,Cost-effectiveness ,Reliable performance

Water Cooler Pad

We Are The Distributor and Wholesaler of Wide Array of Water Cooling Pad That can be availed in several Sizes to Cater to the Varied Customers’ Needs. Appreciated for its High Durability, Reliable Performance and Cost Effectiveness, The Proposed Range is Vastly Popular in The Industry. These Evaporative Cooling Pads are Provided at Industry Leading Prices.

Features:

• High durable
• Cost-effectiveness
• Reliable performance Specifications:
• Type: Air-Cooled
• Application: Greenhouse, Poultry House, Workshop
• Color: Brown/Green/Black/Green&Brown
• Width(Mm): 300, 600

Evaporative Cooling Pad

Minimum Order Quantity	100 Number
Usage/Application	Air Washer Unit
Material	Paper
Brand	ETIP
Look Type	Honeycomb
Flute Angle	70, 90 Degree
Cooling Pad Size	1200 mm x 600 mm x 200 mm

With the support from our meticulous workforce, we are introducing an extensive array of Evaporative Cooling Pad. The offered product is manufactured using superior quality basic material and advanced technology with the set industry standards. Further, our offered pad undergoes stringent test to make sure that offered range is free from any kind of manufacturing defect.

Features:

Premium quality
Finely finished
Durability

Specifications:

Apart from manufacturing the fans for various applications
Enviro tech markets the cell deck cooling pad, made by various companies in India and abroad and is well established with respect to poultry, horticulture (green house) and industrial applications. The evaporative cooling pad (ecp) made of cell deck cooling pad paper is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies
The cell deck cooling pad media is treated with stiffening and wetting agents to provide the cooling, without any water carryover
the pads are designed for tropical and subtropical countries, ensures greater performance during summer seasons
The pad media is treated with anti-rot and rigidifying resins
The media is cross- corrugated to maximize the mixing of air and weather
Saturation effectiveness ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad
air flows horizontally, while the re-circulating water flows vertically, through the pad
The water is collected at bottom of the pad and is re-circulated again by a pump through the unique gutter system made of g. I. Sheet

Applications:

Live stocks
Greenhouses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.

Cellulose Cooling Pad

Minimum Order Quantity	100 Number
Usage/Application	Air Washer Unit
Brand	ETIP
Color	Brown
Available Sizes	1200 mm x 600 mm x 200 mm
Look Type	Honeycomb
Material	Paper

Cellulose Cooling Pad, Cellulose Cooling Pad Apart form manufacturing the fans for various applications, Enviro Tech make the Cellulose Pad, made by these Thailand and Italy various companies in India and are well established with respect to Poultry, Horticulture (Green House) and Industrial applications. The Evaporative Cooling Pad (ECP), made of cellulose paper is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cellulose media is treated with stiffening and wetting agents to provide the cooling without any water carryover. The pads are designed for tropical and subtropical countries, ensures greatest performance during summer seasons. Mixed Esters of Cellulose (MCE) or Cellulose Acetate (CA) is best for microbiology and environment monitoring test. Contrasting grid lines facilitate counting colonies on the filter surface and are tested to assure freedom from grid line inhibition. The Membrane Solutions MCE membranes are also tested for freedom from grid line inhibition and optimal color reactions on appropriate test media. Features The Cellulose Pad is cross corrugated coated with anti rot, rigidify & wetting resins. The 150 VAPUR Pad are made for maximum efficiency, at minimum pressure drop.The pad media is treated with anti-rot and rigidify resins. The media is cross-corrugated to maximize the mixing of air and water. Saturation efficiency ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad. Air flows horizontally, while the re-circulating water flows vertically, through the pad. The water is collected at bottom of the pad and is re-circulated, again by a pump through the unique gutter system made of G. I. Sheet. Availability:- Absorbent Pads Sterile Mixed Cellulose Ester (MCE) filter Petri Dishes Sterile Cellulose Acetate Filter Application:- Enviro Tech make Evaporative Cooler system this system is efficiently backed up by the cellulose pads that in turn amplifies the efficiency of the system on a whole and thus provides cooler air in the required area. Waste-water, Microbiological analysis of water, beverages. Quartz fiber filter for monitoring air pollution. Thimble filters for monitoring dust, organic, metal, or other pollutants. Small volume field sampling and analysis of fluids or aerosols

Cooling Pads

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Dimensions	48” x 24” x 8”, 36” x 24”, 60” x 24”
Brand	ETIP
Material	Paper
Thickness	100-200 mm

Cooling Pads, Enviro Tech Evaporative Cooling Pads for Poultry are used in most of the Poultry Farming and Poultry Industry. Poultry Equipment consultants and fabricators always trusts on economic and best cooling conditions with Enviro Tech Cooling Pads. Evaporative Cooling Pads are made of fluted cellulose sheet those are glued together. Cellulose Sheet is treated with unique ingredients to achieve high cooling efficiency & degradation resistance. As hot air passes through the Enviro Tech Evaporative Cooling Pads, a stream of cool and refreshing air is produced. Enviro Tech model 5090 & 7090 Evaporative Cooling Pads are developed to provide exceptional wetting properties and air flow to achieve optimum cooling capacity and maximum durability. Our Cooling Pads are your best choice!The cooling pad acts as a device that cools air through the evaporation of water. Enviro Tech Cellulose Cooling Pads differs from typical traditional Air Conditioning Systems and Evaporative cooling works by employing water’s large enthalpy of vaporization

Sample Availability : Yes
Supplier Product Code : ETIP

Competitive Advantages of the product:

On days when heat or humidity , excess pollen causes discomfort, people often head off to lakes or the seaside in search of relief. Evaporative Air Cooling is, in many ways, simulating the cooler conditions so often found at or near large expanses of water. It makes it possible to effectively cool factories, warehouses, offices and many other areas, When sitting in a breeze people feel cooler. The same is the case for Poultry Farming, where each and every Bird Life is considered equal to Human.
Main Markets/Key Customers : Poultry Farm, Greenhouse & Horticulture industry, Vegetable Storage,Mushroom Farming, Seed Farming, Floriculture, Poultry & livestock.

Air Cooling Pad

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Filter
Color	Brown
Brand	ETIP
Size	36” x 24′, 60” x 24”
Material	Craft Paper
Thickness	100-300 mm
Basic Weight	>201 g

Air Cooling Pad, We are eminent manufacturers and suppliers of Air Cooling Pad. They are made using highly qualitative raw materials and are well-known for their large evaporation surface area. They have excellent permeability and are used widely in meat, poultry and other similar industries. They are highly acclaimed for their ability to absorb water. They are designed in such a way that they do not disintegrate. They are energy-efficient equipment which consume less power and help reduce the electricity bill by a huge margin. They are available to clients at cost-effective rates in customized specifications.

Features:

High absorbent power
Power saving
Reasonably priced

Cellulose Paper Pad

Minimum Order Quantity	1000 Number
Usage/Application	Air Washer Unit
Color	Brown
Dimensions	72” x 24”, 36” x 24”, 60” x 24”
Brand	ETIP
Material	Paper
Available Thickness	50, 100, 150, 200, 300 mm
Flute Angle	45/45, 45/15
Flute Height	Approximate 7 mm

Cellulose Paper Pad

Features:

Premium quality
Finely finished
Durability

Applications:

Live stocks
Greenhouses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.

Cell Deck

Minimum Order Quantity	1000 Number
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Size	36” x 24”, 60” x 24”
Material	Paper
Thickness	100-200 mm

With the support from our meticulous workforce, we are introducing an extensive array of Cell Deck. The offered product is manufactured using superior quality basic material and advanced technology with the set industry standards. Further, our offered pad undergoes stringent test to make sure that offered range is free from any kind of manufacturing defect.

Features:

Premium quality
Finely finished
Durability

Applications:

Live stocks
Greenhouses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.

Specifications:

Style: European
Environmental Standard: E0
Function: Waterproove, Anti UV, Anti-Crack
Pattern: Sanding, Wood Grain, 3D Embossing
Color: Coffee, Grey, R

Honey Comb Pads

Minimum Order Quantity	100 Number
Usage/Application	Air Washer Unit
Size/Dimension	3′, 4′, 5′, 6′ and 200 mm
Color	Brown
Material	Paper
Brand	ETIP
Frame Material	SS

We are involve in offering superior quality Honey Comb Pads. These Honey Comb are made from high quality of raw material which ensure durability at its user end. These products are available in market at most economical rates. The unique design allows for a low pressure drop across the pad whilst achieving a high cooling efficiency. The pad is designed to be self-cleaning and will retain its rigid structure when exposed to water making it extremely durable. Our pads are able to achieve exceptional wetting abilities to allow for optimal cooling effect in the most economic and environmentally friendly way.

Air Washer Cooling Pad

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Dimensions	36” X 24”, 60” x 24”
Brand	ETIP
Material	Paper
Diameter Biades	910
Import Power	0.75 kw
Electric Current Type	AC
Thickness	100-200 mm

Air Washer Cooling Pad, Which is made of fluted cellulose sheet those are glued together. Cellulose sheet is treated with unique ingredients to achieve high cooling efficiency and degradation resistance.As hot air passes through the Evaporative Cooling Pad, a stream of cool and refreshing air is produced. Enviro Tech Model 5090 & 7090 evaporative cooling pads are developed to provide exceptional wetting properties and airflow to achieve optimum cooling capacity and maximum durability. Our cooling pads pads are your best choice!

Models & Parameter:

H (mm)	1200, 1500, 1800, 2000	As per requirement
W (mm)	900, 800	As per requirement
D (mm)	100, 150, 200, 300	50 – 150
h (mm)	7	5
ÃÂ±	45	45
ÃÂ²	45	45

H: Pad Height
W: Pad Width
h: Flute Height
D: Pad Depth
ÃÂ±: Flute Angle
ÃÂ²: Flute Angle

Features:

Excellent wetting properties
Strong and self supporting
No water carry-over
ECO friendly
High evaporation & cooling efficiency
Long life span
Self cleaning
Easy to install
Low Pressure drop
Dirt resistant
Low operation cost

Application:

Greenhouses & Horticulture industry
Vegetable storage
Mushroom farming
Seed farming
Seed farming
Floriculture
Poultry and Livestock industry
Poultry farms
Livestock
Hatcheries
Dairy farms
Industrial and comfort cooling
Cooling fan
Precoolers
Industrial humidification
Residential cooling.

Paper Fills

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	5 Kg

Paper Fills, The Evaporative Cooling Pad or paper fill is made of cellulose paper and is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cellulose media is treated with stiffening and wetting agents to provide the cooling without any water carryover. The pads are designed for tropical and subtropical countries, ensures greatest performance during summer seasons.

Mixed Esters of Cellulose (MCE) or Cellulose Acetate (CA) is best for microbiology and environment monitoring test. Contrasting grid lines facilitate counting colonies on the filter surface and are tested to assure freedom from grid line inhibition. The Membrane Solutions MCE membranes are also tested for freedom from grid line inhibition and optimal color reactions on appropriate test media.

Features:

The Cellulose Pad is cross corrugated coated with anti rot, rigidify & wetting resins. The 150 VAPUR+ Pad are made for maximum efficiency, at minimum pressure drop.The pad media is treated with anti-rot and rigidify resins. The media is cross-corrugated to maximize the mixing of air and water. Saturation efficiency ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad.
Air flows horizontally, while the re-circulating water flows vertically, through the pad. The water is collected at bottom of the pad and is re-circulated, again by a pump through the unique gutter system made of G. I. Sheet.

Availability:

Absorbent Pads
Sterile Mixed Cellulose Ester (MCE) filter
Petri Dishes

Application:

Enviro Tech make Evaporative Cooler system this system is efficiently backed up by the cellulose pads that in turn amplifies the efficiency of the system on a whole and thus provides cooler air in the required area.

Waste-water, Microbiological analysis of water, beverages.
Quartz fiber filter for monitoring air pollution.
Thimble filters for monitoring dust, organic, metal, or other pollutants.
Small volume field sampling and analysis of fluids or aerosols

Paper Pad (Imported)

Minimum Order Quantity	500 Number
Usage/Application	Air Washer Unit
Brand	ETIP
Color	Green, Brown
Size	1800 mm x 600 mm x 200 mm
Material	Paper
Look Type	Honeycomb
Flute Angle	70, 90 Degree

Paper Pad (Imported)

Our clients can avail premium quality of Paper Pads (Imported) from us. This is available Cellulose Paper Pad (Imported) in width 600 mm height 1200- 1800 mm and 100- 200 mm thick. This is the best cooling media available globally as it absorbs and retains water to provide the maximum cooling efficiencies. Specifications Type Water-Cooled Color Can Customize Size Can Customize Applications Residential Buildings Schools & institutes Auditoriums Banquet halls Poultry farms Shopping plazas Hotel Kitchens Generator rooms Pharmaceutical plants Food processing units Banks Offices Canteens Temples Hospitals Bakeries Factories Restaurants Show rooms Live stocks Green houses

Poultry Evaporative Cooling Pad

Minimum Order Quantity	1000 Unit
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Size	36” x 24”, 60” x 24”
Material	Paper
Thickness	100-200 mm

Poultry Evaporative Cooling Pad, Enviro TEch Poultry Evaporative Cooling Pad are used in most of the Poultry Farming and Poultry Industry. Poultry Equipment consultants and fabricators always trusts on economic and best cooling conditions with Enviro Tech Cooling Pads. Poultry Evaporative Cooling Pad are made of fluted cellulose sheet those are glued together. Cellulose sheet is treated with unique ingredients to achieve high cooling efficiency & degradation resistance. As hot air passes through the ENVIRO TECH Evaporative Cooling Pads, a stream of cool and refreshing air is produced.

ENVIRO TECH model 5090 & 7090 Evaporative Cooling Pads are developed to provide exceptional wetting properties and air flow to achieve optimum cooling capacity and maximum durability. Our cooling pads are your best choice! The cooling pad acts as a device that cools air through the evaporation of water.

ENVIRO TECH Cellulose Cooling Pads differs from typical traditional air conditioning systems and Evaporative cooling Pad works by employing water’s large enthalpy of vaporization.

Applications where ENVIRO TECH Cooling Pads are used

Greenhouse & Horticulture industry
Vegetable Storage
Mushroom Farming
Seed Farming
Floriculture
Poultry & livestock
Poultry Farms
Livestock
Hatcheries
Dairy Farms
Industrial & comfort cooling
Cooling Fan
Precoolers
Industrial Humidification
Residential Cooling

Cooling Pads reduce the temperature inside of buildings. Earlier Water saturated cloth sacks were placed in openings in the structure of the building. As warm air entered, it passed through the sacks and was cooled. Evaporative coolers have been used in warmer climates. As the effects of global warming are the use of Evaporative Coolers is becoming more widespread.

On days when heat or humidity , excess pollen causes discomfort, people often head off to lakes or the seaside in search of relief. Evaporative air cooling is, in many ways, simulating the cooler conditions so often found at or near large expanses of water. It makes it possible to effectively cool factories, warehouses, offices and many other areas . When sitting in a breeze people feel cooler. The same is the case for Poultry Farming, where each and every Bird Life is considered equal to Human Life.

Desert Cooler Pad

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Size	24” x 24”, 48” x 24”, 72” x 24”
Material	Paper
Thickness	100-200 mm

We are offering our clients a comprehensive assortment of Desert Cooler Pad that is manufactured using sophisticated machines and advanced technology. Also, we ensure that only high grade basic material is used in the manufacturing process of this product. Moreover, we also provide our clients with customization facility of this range in order to meet their variegated application requirements. Our quality controllers inspect this range on diverse aspects to ensure its flawlessness.

Features:

Environment friendly
Dirt resistance
Fine finish

Enviro Tech Cooling Pad

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Width	300-600 mm
Brand	ETIP
Weight	4 Kg
Available Height	1500mm, 1800mm, 2000mm
Available Depth	100mm, 150mm, 200mm, 300mm

Our organization is offering Enviro Tech Cooling Pad to our clients. Our offered Enviro Tech Cooling Pad is proved to be an economical way of cooling for mushroom farming, poultry farms, dairy farms livestock farms, green houses and industrial coolers. Easy installation, low maintenance and light weight are some of the main features of this pad.

Rigid Cooling Media

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Cooler Body Material	Cross Corrugated Cellulose Paper Coated With Anti Rot Rigidifying And Wetting Resins
Available Depth	2″, 4″, 6″, 8″, 10″, 12″
Available Height	12″, 24″, 36″, 48″, 60″, 72″
Flute Height	7 mm
Available Width	12″, 24″

Rigid Cooling Media, We offer a comprehensive range of Rigid cooling Media, which is fabricated using quality material to ensure high performance. The Pure Cool Evaporative Cooling Pads (ECP) are made using cellulose paper and cross sectional specially treated flute media that is capable to absorb and retain the water for providing maximum cooling efficiencies. To increase its life, the cellulose media is treated with stiffening and rot-resisting agents. Further, the media is cross corrugated to maximize the mixing of air and water saturation effectiveness that ranges between 50 to 98%. This could be easily achieved depending upon air velocity and depth of the cooling pad.

Absorbent Kraft Paper Honeycomb Cooling Pad

Minimum Order Quantity	100 Square Feet
Color	Brown
Usage/Application	Air Washer Unit
Width	600 mm
Paper Size	24 in. x 24 in. x 8 in., 36 in. x 24 in. x 8 in., 48 in. x 24 in x 8 in
Brand	ETIP
Weight	3 Kg

Absorbent Kraft Paper Honeycomb Cooling Pad, Backed by Rich Industry Experience And Market Understanding, we are involved in offering a wide Array of Honeycomb Cooling Pad to our valued patrons.

Applications:

Live stocks
Greenhouses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.

Available Size:

Dimensions: 24 in. x 24 in. x 8 in.
Dimensions: 36 in. x 24 in. x 8 in.
Dimensions: 48in. x 24 in. x 8 in.
Dimensions: 60 in. x 24 in. x 8 in.
Dimensions: 72 in. x 24 in. x 8 in.

Desert Room Cooler Pad

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Washer Unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Dimension	360x300x870 mm
Net Weight	9.5 kg
Gross Weight	11.4 kg

With the help of our professionals, we have been able to offer our clients a qualitative range of Desert Room Cooler Pad. The offered product is efficiently manufactured by our professionals using premium quality basic material procures from the trustworthy vendors of the market. This pad is designed as per industry standards. Moreover, our clients can avail this product from us in various technical specifications at a very reasonable rate.

Features:

Self Cleaning
Provide excellent cooling
Easy to clean

High Intensity Cooling Pad

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Width	600 mm
Brand	ETIP
Weight	3 Kg
Hight	Up to 2 m
Thicknes	100-150 mm

We are a leader in offering a best quality of High Intensity Cooling Pad to our clients. Our offered High Intensity Cooling Pad is treated with unique chemical material to achieve high cooling efficiency and degradation.

Features:

Excellent wetting properties
Strong and self supporting
High evaporative & cooling efficiency
Applicable to positive-nagative

Cooler Packing Pads

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	3 Kg

We are offering Cooler Packing Pads for our client. These products are designed using technically advanced machinery and by making use of premium grade raw material.

Evaporative Air Cooler Pad

Features:

Resistance against corrosion
Sturdy construction
Fine finish

Desert Cooler Pad

Features:

Easy to clean
Eco-friendly
Dust resistance

Wet Cooler Pad

Features:

Easy to clean
Eco-friendly
Dust resistance

Air Cooler Pads

Features:

Easy to clean
Eco-friendly
Dust resistance

Poly House Cooling Pad

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer Unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	4 Kg

Poly House Cooling Pad

Size Available:

Size: 6 ft.x 2 ft. x 8″ width.,
Size: 5 ft.x 2 ft. x 8″ width.,
Size: 4 ft.x 2 ft. x 8″ width.,
Size: 3 ft.x 2 ft. x 8″ width.,

CELdek 7090-15 Evaporative Cooling Pad

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Green and Brown
Width	600 mm
Brand	ETIP
Cooler Body Material	Paper
Weight	4 Kg

CELdek 7090-15 Evaporative Cooling Pad, CELdek® 7090-15 Evaporative Cooling Pad is Used in Systems Where High Efficiency Cooling is required. It can be used for many different cooling purposes but is particularly suitable for cooling of live stock buildings and Green Houses. The Green stripe pad consists of specially impregnated and corrugated cellulose paper sheets with different flute angles, one steep (60°) and one flat (30°) that have been bonded together. This unique design yields a cooling pad with a high evaporation efficiency while still operating at a very low pressure drop. In addition scaling is kept to a minimum and no water carry-over occurs due to the fact that the water is directed to the air inlet side of the pad. This is Where Most of the Evaporation Takes Place. The impregnation procedure for the cellulose paper ensures a strong self supporting product, with high absorbance, which is protected against decomposition and rotting and therefore increasing longevity. The distribution pad constitutes a vital part of a complete system and should always be ordered in combination with CELdek Evaporative Cooling Pads. Placed on top of the cooling pad it ensures a uniform supply of the Water to The Cooling Pad and minimises the risk of dry spots.
The Evaporative Cooling Technology
Water is circulated through a Pump Station and supplied to the top of the Cooling Pad via a distribution manifold. A Distribution Pad on the top of The Cooling Pad ensures an even water distribution. The water flows down the corrugated surface of the CELdek Evaporative Cooling Pad. Part of the water is Evaporated by the warm and dry air that passes through the pad. The rest of The Water Assists in Washing The Pad, and is Drained back to The Pump Station Through a Gutter System. The heat that is needed for the evaporation is Taken From the Air Itself.
The Air That leaves the Pad is Therefore Cooled and Humidified simultaneously without any external energy supply for the evaporation process. This is nature’s own Cooling Proces.

Equipment 7090-15

High evaporation efficiency:

Superb wetting properties
Low pressure drop when wet, leading to lower operating costs
No Water Carry-Over
Low Scaling
Self Cleaning
Strong And Self Supporting
Long life time
Low Running Costs
Quick and easy to Install
Environmentally Friendly
Consistent High Quality

Celdek Cooling Pad 7090

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	3 Kg

Celdek Cooling Pad 7090, We Have Carved a Niche in the industry by Manufacturing and supplying a commendable array of Celdeck Cooling Pad. In order to eradicate the production defects, these products are thoroughly tested on defined parameters of quality. Our offered pads have gained admiration from every nook and corner of the country for their remarkable quality and durability. These products can be availed from us in different specifications options at leading market prices.

Features:

Flawlessness
Long life
Precisely manufactured

Product Description:

Celdeck Cooling Pad is the ideal and most economical method of cooling.

Celdeck Cooling Pad is the process in which air is cooled by using the heat in the air to evaporate the water from an adjacent surface. A temperature reduction of 10 to 20°C (50-68°F) can be achieved by passing the hot fresh air through the wetted pads. The Temperature Reduction depends on the dry bulb and wet bulb temperature of the ambient incoming air, the thickness of the pad (in the direction of the air travel), the geometry of the pad, the air velocity through the pad and provided the proper amount of water is used and distributed evenly so that all of the pads are wet through their depth, height and width. The hotter and drier the incoming air, the higher the temperature reduction, after passing through the wetted Eaporative Cooling Pads.

Cooling Pad 7090

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	3 Kg

Cooling Pad 7090, Suitable for Typical Application with a Moderate air Face Velocity design such as poultry, and Green Houses.

Other Details:

( α – 45/ β – 45 flute angle configuration flute Ht. – 7 MM):

Features:

Use of space cross link technology, high absorbability, and long service life.
Large evaporative surface area, cooling efficiency as high as 80%
Our cooling pad involves use of surface active agent which absorb water naturally and rapidly thereby having long lasting effectiveness. A Drop of water can diffuse in 4-5 seconds.
The Products Don’t contain phenol which is easy to skin allergy and other chemical substances, when installed, it is non-toxic harmless to human body, safe, energy saving and environment protection
Variety of color available in cooling pads: Brown, Green, and Blue coated.

Applications:

Livestock Farm: Poultry, Dairy, Swine.
Planting: Growing Crops, Greenhouse.
Pre-cooling & Spot cooling: Industrial application, Residential & Commercial Building, Supermarket, Desert Coolers, Air Coolers, Swamp Coolers etc.
Humidification: Industrial Application, Commercial Building.

Why You Should Trust “ENVIRO TECH Cooling Technologies “For Evaporative Cooling Pads:

We use 100% virgin Kraft Paper (Euro origin) and there is no mixing with any softwood pulp or recycle paper. Our paper is anti – bacteria and anti – fungus.
Our pads are impregnated with high quality of chemical agents which makes it usable for a longer period.
Our white glue is imported from Best American Companies to maintain the quality of pads.
We have always believed that quality products can be made only if it is made out of quality raw materials thereby assuring best of our services to our valued customers

Evaporative Cooling Pad 7090

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	ETIP
Weight	3 Kg

Evaporative Cooling Pad 7090, The Cellulose Pad is cross corrugated coated with anti rot, rigidifying & wetting resins. The 150 VAPUR+ Pad are made for maximum efficiency, at minimum pressure drop.The pad media is treated with anti-rot and rigidifying resins. The media is cross-corrugated to maximize the mixing of air and water. Saturation efficiency ranging from 50 to 98% can be achieved depending upon air velocity and depth of the cooling pad. Air Flows Horizontally, while the re-circulating water flows vertically, through the pad. The water is collected at bottom of the pad and is re-circulated, again by a pump through the unique gutter system made of G. I. Sheet.

Availability:

Absorbent Pads
Sterile Mixed Cellulose Ester (MCE) filter
Petri Dishes
Sterile Cellulose Acetate Filter

Application:-ENVIRO TECH Make Evaporative Cooler system this system is efficiently backed up by the cellulose pads that in turn amplifies the efficiency of the system on a whole and thus provides cooler air in the required area. Wastewater, Microbiological analysis of water, beverages.Quartz fiber filter for monitoring air pollution.Thimble filters for monitoring dust, organic, metal, or other pollutants.Small volume field sampling and analysis of fluids or aerosols.

Water Evaporative Cooling Pad

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Dimensions	60” X 24” X 8”
Brand	ETIP
Material	Paper
Thickness	100-200 mm

Water Evaporative Cooling Pad, We are the distributor and wholesaler of wide array of Water Cooling Pad that can be availed in several sizes to cater to the varied customers’ needs. Appreciated for its high durability, reliable performance and cost effectiveness, the proposed range is vastly popular in the industry. These evaporative cooling pads are provided at industry leading prices.

Features:

High durable
Cost-effectiveness
Reliable performance

Green House Cooling Pad

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Width	600 mm
Brand	ETIP
Weight	4 Kg
Noise Level	Low

Green House Cooling Pad, We are Reckoned as the Foremost Manufacturer, Trader and supplier of Green House Cooling Pad that are offered in variety sizes, thickness and other related specifications. Manufacture with the aid of latest Technology at our well-developed manufacturing unit, this product is designed in compliance with set industry norms. Moreover, clients can avail the offered range from us at market leading prices.

Features:

Weather resistance
Easy to clean
Environment friendly

Energy Efficient Honeycomb Celdek Cellulose Pad

Minimum Order Quantity	100 Square Feet
Usage/Application	AIR WESHER
Color	Brown
Width	600 MM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Weight	25 kg approx
Country of Origin	Made in India

Energy Efficient Honeycomb Celdek Cellulose Pad

We At ENVIRO TECH Manufacturers The Energy Efficient HONEYCOMB Celdek Cellulose Pads, They Are Designed With High Water To Air Contact Area To Promote Water Evaporation.
Energy Efficient HONEYCOMB Celdek Cellulose Pads Are Made From Cellulose Sheets In a Honeycomb Structure. It Has a Higher Saturation Efficiency And Much Longer Life Span. Energy Efficient HONEYCOMB Celdek Cellulose Pads Normally Last 4-5 Years Depending On Water Quality.
Currently We Are Producing 2 Models of ENVIRO TECH Energy Efficient HONEYCOMB Celdek Cellulose Pads 5090 & 7090 With The Flute Size of 5 MM and 7 MM.
Energy Efficient HONEYCOMB Celdek Cellulose Pads for Domestic Air Coolers, Industrial Air Coolers, AHU’s, HVAC’s.It is Made From Europe’s Best Energy Efficient HONEYCOMB Celdek Cellulose Pads.Dynea’s Best Resin and Glued With American Material.

Key Benefits Of The Product:

High Strength
Non Hazardous & Environment Friendly For Use
Rust Resistant & Good Water Absorption
Longer Pad Life,
Cost Effective Solution
Light In Weight & Low Maintenance

High Efficiency Cellulose Pad

Material	Cellulose
Usage/Application	AIR WESHER
Color	Brown
Width	600 MM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Weight	25 kg approx
Country of Origin	Made in India

High Efficiency Cellulose Pad

We At ENVIRO TECH Manufacturers The High Efficiency Cellulose Pad, They Are Designed With High Water To Air Contact Area To Promote Water Evaporation.

High Efficiency Cellulose Pad Are Made From Cellulose Sheets In a Honeycomb Structure. It Has a Higher Saturation Efficiency And Much Longer Life Span. High Efficiency Cellulose Pad Normally Last 4-5 Years Depending On Water Quality.

Currently We Are Producing 2 Models of ENVIRO TECH High Efficiency Cellulose Pad 5090 & 7090 With The Flute Size of 5 MM and 7 MM.
High Efficiency Cellulose Pad for Domestic Air Coolers, Industrial Air Coolers, AHU’s, HVAC’s.It is Made From Europe’s Best High Efficiency Cellulose Pad.Dynea’s Best Resin and Glued With American Material.

Key Benefits Of The Product:

High Strength
Non Hazardous & Environment Friendly For Use
Rust Resistant & Good Water Absorption
Longer Pad Life,
Cost Effective Solution
Light In Weight & Low Maintenance

Wet Cooler Pad

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Width	600 mm
Brand	ETIP
Weight	4 Kg

Backed by rich industry experience and knowledge, we have been able to satisfy the diverse needs of clients by providing an assorted gamut of Wet Cooler Pad. For the manufacturing of this range, we make use of optimum quality basic material and inoculate contemporary technology. Our team of diligent professionals examines the entire production process in order to eradicate all kinds of flaw and offer perfect range at the clients’ end.

Features:

Easy to clean
Eco-friendly
Dust resistance

Cooling Pad For Poly House

Minimum Order Quantity	1000 Square Feet
Usage/Application	Air Washer unit
Color	Brown
Width	600 mm
Brand	ETIP
Weight	4 Kg

Cooling Pad For Poly House

Made up of cellulose:

Size: 6 ft.x 2 ft. x 8″ width.,
Size: 5 ft.x 2 ft. x 8″ width.,
Size: 4 ft.x 2 ft. x 8″ width.,

8 Inch Rigid Media Pad

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Washer Unit
Dimensions	60 in. x 24 in. x 8 in.
Color	Brown
Brand	ETIP
Material	Paper

8 inch Rigid Media Pad

Available from these sellers.
Made with premium CELdek media
Easily installed in your existing evaporative cooler Strong and durable construction with a multi-layer design for higher efficiency. Multi-layer design for a higher efficiency rating and a stronger, more durable construction
GREENGUARD Certified by Munters guarenteeing no harmful emissions are present

Dimensions: 24 in. x 24 in. x 8 in.
Dimensions: 36 in. x 24 in. x 8 in.
Dimensions: 48in. x 24 in. x 8 in.
Dimensions: 60 in. x 24 in. x 8 in.
Dimensions: 72 in. x 24 in. x 8 in.

4 Inches Thickness Air Cooling Pads

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Size	60 in. x 24 in. x 4 in.
Material	Paper

4 Inches Thickness Air Cooling Pads

Available from these sellers. Made with premium CELdek media Easily installed in your existing evaporative cooler Strong and durable construction with a multi-layer design for higher efficiency. Multi-layer design for a higher efficiency rating and a stronger, more durable construction
GREENGUARD Certified by Munters guarenteeing no harmful emissions are present

Dimensions: 24 In. X 24 In. X 4 In.
Dimensions: 36 In. X 24 In. X 4 In.
Dimensions: 48in. X 24 In. X 4 In.
Dimensions: 60 In. X 24 In. X 4 In.
Dimensions: 72 In. X 24 In. X 4 In.

8 Inches Thickness Air Cooling Pads

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Washer Unit
Color	Green & Brown
Brand	ETIP
Size	72 in. x 24 in. x 8 in.
Material	Paper

8 Inches Thickness Air Cooling Pads

Available from these sellers.

Made with premium CELdek media
Easily installed in your existing evaorative cooler
Strong and durable construction with a multi-layer design for higher efficiency. Multi-layer design for a higher efficiency rating and a stronger, more durable construction
GREENGUARD Certified by Munters guarenteeing no harmful emissions are present
Dimensions: 24 in. x 24 in. x 8 in.
Dimensions: 36 in. x 24 in. x 8 in.
Dimensions: 48in. x 24 in. x 8 in.
Dimensions: 60 in. x 24 in. x 8 in.
Dimensions: 72 in. x 24 in. x 8 in.

Cooling Wet Curtain

Minimum Order Quantity	100 Unit
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Material	Paper
Thickness	100-200 mm

Cooling Wet Curtain, We are specialized in offering Cooling Wet Curtain to our customers. Our presented product is extremely used in the market owing to their top features.

Features:

Affordable rates
Low maintenance

Other Detail:

With Galvanized Frame

Enviro Tech Evaporative Cooling Pads

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Washer Unit
Color	Brown
Brand	ETIP
Cooler Body Material	Plastic, Fiber
Material	Paper

Evaporative Cooling with Enviro Tech Evaporative Cooling Pads is the ideal and most economical method of cooling. Evaporative Cooling is the process in which air is cooled by using the heat in the air to evaporate the water from an adjacent surface. A temperature reduction of 10 to 20 degree C (50-68 degree F) can be achieved by passing the hot fresh air through the wetted pads. The temperature reduction depends on the dry bulb and wet bulb temperature of the ambient incoming air, the thickness of the pad (in the direction of the air travel), the geometry of the pad, the air velocity through the pad and provided the proper amount of water is used and distributed evenly so that all of the pads are wet through their depth, height and width. The hotter and drier the incoming air, the higher the temperature reduction, after passing through the wetted Enviro Tech pads.

Why Enviro Tech Evaporative Cooling Pad ?

Exported to Europe, Australia, Middle East and USA
Available in Standard and Customised Sizes
Durable
Compatible
Economical
All-India Network
Technical Support
No Edge Build Up
Good Quality Gluing
Quick Deliveries
Water Retention
Samples available on request

Ideal for:

Green houses, mushroom farming, agrihot and floriculture
Poultry farms, hatcheries, breeding areas, livestock and dairy farms
Commercial and industrial areas
Industrial Coolers

Voltas Air Cooling Pad

Minimum Order Quantity	100 Number
Usage/Application	Air Washer Unit
Color	Brown
Width	600 mm
Brand	ETIP
Material	Paper
Height	1200-2000 mm
Depth	100-300 mm

We are eminent manufacturers and suppliers of Voltas Air Cooling Pad. They are made using highly qualitative raw materials and are well-known for their large evaporation surface area. They have excellent permeability and are used widely in meat, poultry and other similar industries. They are highly acclaimed for their ability to absorb water. They are designed in such a way that they do not disintegrate. They are energy-efficient equipments which consume less power and help reduce the electricity bill by a huge margin. They are available to clients at cost-effective rates in customized specifications.

Features:

High absorbent power
Power saving
Reasonably priced

Honeycomb Panels

Minimum Order Quantity	100 Square Feet
Position	Interior
Brand	ETIP
Material	Cellulose Honeycomb Media
Dimension	1800 MM X 600 MM X 200 MM
Country of Origin	Made in India
Application	Poultry House, Green House, Air Coolers
Weight	25 kg approx
Type	Honeycomb Cooling Pad

Honey Comb Panels

We Are Offering A High Quality Collection Of Honey Comb Panels To Our Valuable Customers.

Applications:

Live Stocks
Green Houses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.
Greenhouses & Horticulture industry
Vegetable storage
Mushroom farming
Seed farming
Seed farming
Floriculture
Poultry and Livestock industry
Poultry farms
Livestock
Hatcheries
Dairy farms
Industrial and comfort cooling
Cooling fan
Precoolers
Industrial humidification
Residential cooling.

Features:

Excellent Wetting Properties
Strong And Self Supporting
No Water Carry Over
ECO Friendly
High Evaporation & Cooling Efficiency
Long Life Span
Self Cleaning
Easy To Install
Low Pressure Drop
Dirt Resistant
Low Operation Cost

Paper Honeycomb Panel

Minimum Order Quantity	100 Square Feet
Position	Interior
Brand	ETIP
Material	Paper
Dimension	1800 MM X 600 MM X 200 MM
Country of Origin	Made in India
Application	Poultry House, Green House, Air Coolers
Weight	25 kg approx
Type	Honeycomb Cooling Pad
Depth	50 MM,100 MM,150 MM, 200 MM, 300 MM

Paper Honeycomb Panel

We Are Offering A High Quality Collection Of Paper Honey Comb Panels To Our Valuable Customers.

Applications:

Live Stocks
Green Houses
Gas Turbine
Pre Cooler For Air Cooled Condenser
Spray Painting Booth
Industrial Applications
Commercial Applications
Humidification.
Greenhouses & Horticulture industry
Vegetable storage
Mushroom farming
Seed farming
Seed farming
Floriculture
Poultry and Livestock industry
Poultry farms
Livestock
Hatcheries
Dairy farms
Industrial and comfort cooling
Cooling fan
Precoolers
Industrial humidification
Residential cooling.

Features:

Excellent Wetting Properties
Strong And Self Supporting
No Water Carry Over
ECO Friendly
High Evaporation & Cooling Efficiency
Long Life Span
Self Cleaning
Easy To Install
Low Pressure Drop
Dirt Resistant
Low Operation Cost

Cooling Pad Filter

Minimum Order Quantity	1 Square Feet
Material	Paper
Color	Brown
Diameter (Inch)	200 mm
Usage/Application	Air Washer Unit
Brand	ETIP

Cooling Pad Filters, We are offering our clients a comprehensive assortment of Cooling Pad Filters that is manufactured using sophisticated machines and advanced technology.Also, we ensure that only high grade basic material is used in the manufacturing process of this product.Moreover, we also provide our clients with customization facility of this range in order to meet their variegated application requirements. Our quality controllers inspect this range on diverse aspects to ensure its flawlessness.

Features:

Environment friendly
Dirt resistance
Fine finish

AHU Filter Manufacture From India

Industrial Filters

Material	Non Woven
Usage/Application	Industrial
Flow Rate	0-500 m^3/hr
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Thickness	10 mic

Industrial Filters

we offer a comprehensive range of industrial filters for pharmaceutical industries.

following are some of the industrial filters for pharmaceutical industries:

microwave filters
pre filters
automotive hdpe filters
fine filter
hepa filter
mini plate hepa filter
ulpa cells filters
super fine filters
high temperature hepa air filter
absolute compact filter
hepa filters (standard flow)
hepa filter terminal box
high efficiency particulate air filter
ulpa filters
deep pleat hepa filters
semi hepa filter
air hepa filters
industrial hepa filters

specifications:

type: niphos water filter
usage: environmental protection
motive force: pressure

Air Handling Unit Filter

Usage/Application	Industrial
Filter Area	4.1 m3
Rated Airflow	425 m3/h
Initial Resistance	235 Pa
Maximum Final Resistance	1300 Pa
Recommended Airflow	250-500 m3/h

Air Handling Unit Filter Keeping track of the latest market development, we are introducing a wide range of Air Handling Unit Filter. Offered in varied sizes and specifications as per the application requirements of our clients, this filter is manufactured using superior quality raw material and employing contemporary technology. In addition, our quality examiner conduct a series of test on this range in order to eradicate any kind of defect in it. Features High dust holding capacity Low maintenance Durability Specifications Efficiency Standard hdpe pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order. Frame Type Available in flange or box type Frame Material Standard model is constructed in galvanized steel. Other models with aluminium anodized/stainless steel frame with or without powder coating are also available on order. Filter Media HDPE and non-woven synthetic. Sealant PU based epoxy Support Large frame size models are made wobble resistant using gi/aluminium/ss support Face Guard No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides Nominal Depth Depth size is available from 1. 0 inches to 6 inches (pre hdpe pleated and rod type) Pressure Drop Initial pressure drop ~2. 5mm wg and recommended final pressure drop is 5-10mm wg Operating Conditions Filter can withstand temperature up to 80c and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused. Application Enviro tech pre filters are most suited for air handling units (ahus), air-conditioning systems, power plants, chemical and fertilizer complexes, green houses, automatic drain holes, paint shops, textile mills, cement factories, laminar air flow units, biosafety hoods, fan filter units (ffu), gas turbine industry, compressor, diesel engines, nuclear power station, cd-rom production industry, picture tube production industry, semi-conductor industry, aeronautical industry and miscellaneou

Industrial AHU Filters

Brand	Enviro Tech Industrial Products
Filtration Grade	Pre Filter
Usage/Application	Commercial
Efficiency	F8
Frame Material	Aluminium
Material	PVC

We also meet the requirement of replacement AHU Filters which are widely used for filtering the air and thus, ensure clean air for healthy breathing. Our assortment of AHU Filters is used for proper ventilation & suctions of AHU’ s installed at hospitals, hotels, malls and other such establishments.

Further, these filters are available in two variants:

Pre Filters
Fine Filters

Salient Features:

Pre -Filter:

Efficiency: 90% down to 5 to 25
Media: Non-woven synthetic that is washable with soap, water, or solvent
Initial pressure drop: 2.5mm WG or as per requirement

Fine Filter:

Efficiency: 99.9% down to 1 to 5
Media: Non-woven synthetic (cleaned by dry air)
Initial pressure drop: 6.5mm WG or as per requirement

Air Conditioning Filter

Efficiency	95%
Application	Air Washer
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Synthetic Fiber, Fiberglass, Microfiber
Filtration Grade	Hepa Filter, Pre Filter
Filter Type	Box Filter
Flow Rate (m3/hr)	2000 CFM
Min Working Pressure	25 mm WC
Material	GI sheet
Product dimension (LBH in mm)	610 X 610 X 50 mm

We produce a wide variety of Air Conditioning Filter. Manufactured using high quality raw substance, these are sourced from our reliable vendors. Our filters are highly efficient in attracting the dust, pollen and also confine pet dander, bacterial and various other viruses. Our company always fulfills the requirement of our clients at affordable prices.

Combination Filter

Brand	Enviro Tech Industrial Products
Filter Type	Suction Filters
Material	Non Woven
Filtration Medium Material	Fiberglass
Usage/Application	Industrial
Shape	Square
Thickness	10 mic
Frame Material	GI

In order to keep pace with the never ending demands of customers, we are involved into offering wide range of Combination Air Filter.

Features:

Perfect design
Long lasting
High performance

Pleated Type Pre Filters

Minimum Order Quantity	12 Number
Filter Medium Material	Non Woven Synthetic Filter Media
Usage/Application	Coolant, Cutting, Oil and Lubricant
Material	Non Woven Synthetic Filter Media
Initial Pressure	25 mm WC
Efficiency	95%
Brand	Enviro Tech Industrial Products

Our company has gained immense experience in the field of presenting Pre Filters Pleated Type.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Yes! I am interested

Flat Type Synthetic Pre Filter

Minimum Order Quantity	10 Number
Size	12″x24″
Usage/Application	Industrial
Material	Synthetic
Shape	Rectangle
Thickness	25-50 mm
Brand	Enviro Tech Industrial Products

High Performance pleated panel air filters for HVAC & General Ventilation used as pre filtration to extend the life of Fine Filters.

Features:

Low initial pressure drop
Disposable/Washable
Maintenance Free
Compact Design

PAH Series HVAC Filter

Brand	Enviro Tech Industrial Products
Material	Non Woven
Usage/Application	Industrial
Effiency	90%
Thickness	20 micron
Face Velocity	1.80 m/sec

We offer wide range of filters for clean rooms and hvac applications, these products are widely used in pharmaceuticals, aeronautical,electronics, capacitor, cables, optical and other industries.

Element Filter Air Primary

Minimum Order Quantity	100 Number
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Non Woven
Usage/Application	Industrial
Color	White
Efficiency	95%
Filtration Grade	Ulpa Filter, Medium Filter, Pre Filter
Medium Material	Microfiber, Synthetic Fiber
Filter Type	Compressed intake filters, Air Filter
Rated Flow(m3/hr)	2000
Min Working Pressure	25 mm WC
Brand	Enviro Tech Industrial Products

Element Filter Air Primary

Manufacturer : Enviro Tech Industrial Products

Size mm – 610 MM X 610 MM X 50 MM

Technical Specifications

Proucts – Element Filter Air Primary Box Type

Material – Frame Aluminium, G.I, Stainless Steel

Media – Synthetic Non Woven With HDPE 40 Mesh On Air Entry Side & Aluminium Expanded On Air Exit Sides.

Efficiency – 95 % Down To 10 Micron EU-7

Sealing – Epoxy Sealing

Gasket – Food Grade

Initial Pressure Drop – More Than 25 MMWC

GI Frame Panel Element Filter

Minimum Order Quantity	100 Number
Brand	Enviro Tech Industrial Products
Filter Type	Suction Filters
Material	Non Woven
Usage/Application	Industrial
Shape	Square
Thickness	5-10 mic
Frame Material	GI

GI Frame Panel Element Filter

we are leading supplier & distributors of gi fram panel element.

manufacturer : enviro tech industrial products
item covered
sl.no.	size mm
	height	width	depth	quentity
01	610 mm	610 mm	50 mm	1

technical specifications

product

gi fram panel element box type

material

frame gi / aluminum

media

synthetic non woven with hdpe 40 mesh on air entry side & alu. expanded on air exit sides.

efficiency

95 % down to 10 micron eu-7

sealing

epoxy sealing

gasket

food grade

initial pressure drop

more than 25 mm/wc

Air Filter Folded Media

Brand	Enviro Tech Industrial Products
Material	Non Woven
Filtration Medium Material	Fiberglass
Filtration Grade	Pre Filter
Synthetic Non Woven Media	GI Mesh
Aluminum Mesh	SS Mesh

With the proficiency of this field, we are capable to present an extensive range of Air Filter Folded Media. in addition, we present these cabins in varied sizes and designs that meet on patron’s demand.

Heating Ventilation Air Conditioning Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Medium Material	Synthetic Fiber
Filtration Grade	Pre Filter
Filter Type	Box Filter
Material	PVC
Efficiency	99.99%
Temperature	80degC
Air Volume	400 m3/h

Owing to our extensive years of industry experience and profound market understanding, we are providing a wide gamut of Heating Ventilation Air Conditioning Filter. It is widely used in HVAC Systems, AHU Systems and for other industrial blower applications where dust and dirt are to be removed. In order to provide an excellent range to our clients, this filter is manufactured by employing sophisticated technology by our professionals. Apart from this, we provide this filter at industry leading prices. HVAC Filter There is an increasing need for cleaner environment be it office, plants and homes. We have a wide range of air filters used in HVAC Systems, AHU Systems and for other industrial blower applications where dust and dirt are to be removed. We offer a wide range of air filters for this application. They have different names, panel filters, box or flange type, blower filters, pocket filters, mini pleat and deep pleat filters.

Features:

Large dust collection
High efficiency
Optimum quality

Range are available:

Deep Pleat Filter
Mini Pleat Filter
Pocket Filter
Pre Filter
Panel Filter
FRP Coated Air Filter

Pre Filter Flange Type

Filtration Grade	Non Woven Synthetic Filter Media
Filter Type	Panel Filter
Usage/Application	Hospitals Pharmaceuticals
Material	Aluminium Sheet / GI Sheet
Flow Rate	2000 CFM
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter Box Type

Filtration Grade	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Usage/Application	Clean Room Application
Material	Aluminium Sheet / GI Sheet
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter 3 Micron

Filtration Medium Material	Thermally Bonded Synthetic Filter Media
Filter Type	Box Filter
Usage/Application	Hospitals Pharmaceuticals
Thickness	3 mic
Efficiency	50-99%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Applications:

Laminar Flow Units
Clean Room Application
Hospitals Pharmaceuticals

Pre Filter 10 Micron

Application	Clean Room Application
Filter Medium Material	Non Woven Synthetic Filter Media
Size	610 X 610 X 50 mm
Flow Rate	2000 CFM
Efficiency	95%
Brand	Enviro Tech Industrial Products
Thickness	10 mic

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Applications:

Laminar Flow Units
Clean Room Application
Hospitals Pharmaceuticals

Pre Filter Aluminum Sheet Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Usage/Application	Hospitals Pharmaceuticals
Material	Aluminium Sheet / GI Sheet
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Pre Filter GI Sheet Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Usage/Application	Ahu
Material	GI Sheet
Efficiency	95 %
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm
Is It Washable	Washable

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

Pre Filter Aluminum Section Frame

Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Box Filter
Usage/Application	Air Washer
Material	Aluminium
Shape	Square
Efficiency	95%
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 50 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Pre Filter Flange Type / Box Type.

AHU Air Filters

Application	HVAC system
Material	ABS/PVC
Weight	2.8 kg
Porosity	0.3micron
Header Size	20/25mm

We are involved in manufacturing and supplying a wide range of AHU Air Filters. These are widely recommended by various numbers of clients owing to its uninterrupted functioning and effective performance. these find their wide application in various industries for filtering the air and thus, ensure clean air for healthy breathing. Following the specific requirements of clients, we provide these filters in various range.

Features:

Optimum performance
High functional efficiency
Longer functional life

Furnace HVAC Filter

Brand	Enviro Tech Industrial Products
Material	Non Woven
Usage/Application	Hydraulic Oil, Coolant, Cutting
Frame Material	Aluminium anodized
Size	610x610x50 mm
Thickness	10-20 mic

Our company holds vast experience in this domain and is involved in offering Furnace HVAC Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

AC HVAC Filter

Usage/Application	Hydraulic Oil, Coolant, Cutting
Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Features	Eco Friendly
Size	25mm and 50mm
Efficiency	92%

We bring forth vast industrial experience and expertise in this business, instrumental in AC HVAC Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Pre Filter Pleated Type

Brand	Enviro Tech Industrial Products
Shape	Square
Flow	120 cfm
Initial Pressure Drop	12 mm
Recommended Final Pressure Drop	25 mm
Frame	Al. Andoized/ GL/ SS 304

To meet the various requirements of the customers, we are involved in offering a wide assortment of Pre Filter Pleated Type.

Applications: Laminar flow units, clean room application, hospitals pharmaceuticals

Primary Filters

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Grade	Hepa Filter
Medium Material	Paper, Synthetic Fiber, Microfiber
Construction	Panel Filter
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 mm WC

Primary Filters

Product Description:

Primary Filters We are acclaimed Manufacturers and suppliers of a qualitative range of AHU Primary Filter. These find their wide application for the industrial ventilation and air conditioning purposes. Made as per world class standards, these filters are extensively acclaimed for high dust loading capacity and excellent performance. Compact sized our AHU Primary Filter ensure easy installation and effective performance.
Features:Excellent performance Finest quality Robustness

About Us

We, Enviro Tech Industrial Products are a Delhi, India based company. Our firm determination, hard work, sincere efforts and professional behavior makes us a leading Manufacturer, Exporter, Trader and Supplier. The clients can purchase superior quality Air Distribution Products, Air Cooling Systems, Cooling Tower Accessories, Air Distribution Machine, Industrial Air Cooler, Air Handling Unit, Air Ventilator Machine, Axial Flow Fan etc. in different technical specifications. Offered Air Cooling Machine is mainly used in the offices, residences and commercial complexes for cooling the air. By providing exceptional quality goods, we are constantly meeting the diversified requirements of roofing industry, agriculture dairy, poultry farm industries, textile, garment, dyeing, engineering, food, hospitality industries, pharma and electronic industries. Under the guidance of our mentor, Mr. Ravinder Pal Sharma (Founder), we have been able to collaborate with the well known names of the market. The brands who are availing our goods includes Indo Chem, Ananda, Uflex, Klintoz, Intas Bio Pharmaceuticals, Phoenix Contact and many more.

Our Products and Delivery

Primary Business : Manufacturer

Delivery Locations : All Over India

Secondary Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Filtration Grade	Hepa Filter
Medium Material	Paper, Synthetic Fiber, Microfiber
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 mm WC

Banking on the skills of our qualified team of professionals, we are engaged in offering superb quality assortment of Secondary Fine Filter.

Additional Information:

We offer a wide range Secondary Fine Filters which provides maximum filtration area and high shelf life. These filters are made as per G.D method and are easy to wash, clean and conforms to ASHRAE 52.2/EN779. Made from hi-quality non woven synthetic felt (Needle punched filter media) supported by HDPE wire mesh, these fine filters can hold 5 micron of dust present in the environment. In these Secondary Fine Filters, the filter media is stitched and pleated together to give utmost filtration area in the space provided & finally housed in a metal frame. Specially designed for high efficiency filtration, these fine filters is compulsorily used as – ‘Pre Filters’ to ‘HEPA Filters’.

Application:

Pharmaceuticals
Hospitals
Computer installations
Fertilizers plants
Central AC plants
Ventilation systems

All Metallic Wire Mesh Filter (Duplex Type)

Specifications:

Available in G.I., MS and MS powder coated frames
Available both in flang and box type frames in different sizes and depths as per system air flow

About Us

Established in the year 1995, Enviro Tech Industrial Products has carved a niche amongst the most trusted names in the market. The head quarter of our organization is situated at DELHI, Gandhi Nager. We are dedicatedly involved in manufacturing, importing and exporting a superior quality array of Pocket Filter, Filter Media and many more. These products are manufactured by utilizing optimum quality raw material. We are also involved in exporting 10-15% of our products to Bangladesh, Oman, Brazil, France and Japan. We also import 10-15% of our products from USA, China and Asian countries

Our Products and Delivery

Primary Business : Manufacturer

Delivery Locations : Deals In India As Well As Global

FILTER GRADE	FILTER SIZE IN MM	AIR FLOW CAPACITY	INITIAL PRESSURE DROP
Pre filter 90% efficiency @ 10 microns (G3)	610 x 610 x 48	1150 CFM	4 mm WC
Fine filter 95% efficiency @ 5 microns (F5)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	7 mm WC 7 mm WC
Fine filter 95% efficiency @ 3 microns (F7)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	12 mm WC 12 mm WC
Fine filter 95% efficiency @ 1 microns (F9)	610 x 610 x 150 610 x 610 x 300	1000 CFM 2000 CFM	15 mm WC 15 mm WC
Super fine filter 70% efficiency @ 0.3 microns (H10)	610 x 610 x 295	2000 CFM	15 mm WC
Hepa filter (Deep pleat) 99.99% efficiency @ 0.3 microns (H13)	610 x 610 x 145 610 x 610 x 295	625 CFM 1275 CFM	18 mm WC,br>18 mm WC
Hepa filter (Mini pleat) 99.99% efficiency @ 0.3 microns (H13)	610 x 610 x 70	625 CFM	18 mm WC
High flow Hepa filter (H13) 99.97% efficiency @ 0.3 microns	610 x 610 x 295 610 x 610 x 295	2000 CFM	25 mm WC

Microwave V Filter

Brand	Enviro Tech Industrial Products
Shape	Square, Rectangle
Usage/Application	Commercial
Filter Medium Material	Microfiber
Aluminum Frame	SS Frame
Thickness	5 mic

To keep the client satisfied, we manufacture, trade, export and supply high quality Microwave V Filter. the offered filters are designed to arrest finer particles up to 5 microns. it is normally used as a secondary filter after pre filters to have prolonged service life. this range is used in any air handling application. being a quality-oriented organization, we assure our clients that these products are the best in quality. our skilled professionals only utilize fine quality raw material, while manufacturing the entire range.

Features:

Easy to clean
Easy installation
Precisely design

Multi Layer Filter Media Folding

Usage/Application	Air Filter
GSM	250-300
Filtration Medium Material	Synthetic Fiber
GI Mesh	Aluminum Mesh
Thickness	10 & 20 Micron
Filtration Media	Filter Paper
Liquid to be Filtered	Distil Water

With the proficiency of this field, we are capable to present an extensive range of Multi Layer Filter Media Folding. In addition, we present these cabins in varied sizes and designs that meet on patron’s demand.

Biogas Filter

Minimum Order Quantity	12 Number
Filter Type	Bag Filter
Diameter	1-2 inch
Application	Industrial
Length	5-10 inch
Filter Medium Material	Activated Carbon
Operating Pressure	10 bar

Originating from biomass is gaining increasing worldwide importance as a recognized renewable energy source.

Box Frame Filter

Minimum Order Quantity	100 Number
Filter Type	Box Filter
Filtration Grade	Pre Filter
Brand	Enviro Tech Industrial Products
Filter Medium Material	EU 4
Material	Galvanized Iron
Initial Pressure	25 MM WC
Efficiency	95 %
Size	610 X 610 X 50 mm
Flow Rate	2000 CFM

Owing to our industrial experience, we have been able to manufacture and supply the best quality of Box Frame Filter. These filters are known for their rich features such as easy installation and leakage resistance finish. We have been able to meet the bulk demands of the offered filters, owing to our large production capacity.

Features:

Resistance against leakage
Thermal stability
Easy to install

Out Door Cabinet Filter

Usage/Application	Industrial
Filter Type	Cartridge Filter
Brand	Enviro Tech Industrial Products
Shape	Rectangle
Filter Medium Material	Metal, Fiberglass, Microfiber
Flow Rate (cubic meters/hr)	0-500, 500-1000, 1000-2000, 2000-3000

Our organization has successfully expanded its business in market owing to the offered elevated quality array of Out Door Cabinet Filter. The offered range is manufactured utilizing superior quality raw material and latest technology. Moreover, a team of our quality controllers conducts a series of quality tests on the entire range to seek out any possible defect. In tune with international standard, we provide this filter in various sizes and industry leading prices.

Features:

Compact size
Durability
Easy to install

Specification:
Efficiency :standard HDPE Foam type filters have an efficiency of 90% for 10 micron size particles. filters with an efficiency rating of 80 to 90% to capture 10 micron to size particles are also available on order.

Frame Type : Available in are Box type Aluminium Frame.
Frame Material : standard model is constructed in Aluminium Frame. are also available on order.
Filter Media :HDPE and non- Woven synthetic.
Net :Aluminium.
Standard Filter Sizes : -375 MM 225 MM

Fine Filter 10 MIcron

Filter Medium Material	Non Woven Synthetic Filter Media
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Application	Hospitals Pharmaceuticals
Flow Rate	0-500 m^3/hr
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Flange Type Micro Fine Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Laminar flow units, clean room application, hospitals pharmaceuticals
Filter Medium Material	Microfiber
Size	610x610x305 mm
Shape	Square

Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of Micro Fine Filter Flange Type.

Fine Filter

Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven
Filtration Grade	Pre Filter
Filter Type	Box Filter, Panel Filter
Min Working Pressure	25 mm WC
Material of construction	Aluminum, Stainless Steel
Size	610 X 610 X 305 mm

Filters has achieved the status of a major indian air filters and clean room equipment manufacturer and regular clients include most of the leading pharmaceutical and electronic product manufacturers,as well as nuclear power, atomic energy and space research establishments. leading consultants, user industries and hvac turn-key engineering companies have approved our products and test facilities.enviro tech industrial products fine filters are used for high level pre filtration in air conditioning of paint booths, air handling units etc.

Fine Filters are available in the range of 1 to 5 micron:

low initial pressure drop.
light in weight and easy to handle.
high cost / performance ratio.
high dust holding capacity.
cleanable / washable.

Applications:

general filtration for air-conditioning and air handling units.
general air filtration and pre-filtration.
spray booths and pre-filtration.

Specifications:

type: flange or box
frame: galvanized steel, aluminum anodized,ss304
separators: aluminum
filter media: hdpe media / non woven synthetic media

All these filters are washable and hence reusable. normal sizes available are:

no	sizes in inchs	flow ( cfm )
1.	20 x 12 x 6	120
2.	20 x 15 x 6	520
3.	20 x 20 x 6	700
4.	24 x 24 x 6	1000
5.	24 x 24 x 12	2000

HEPA Filter Terminal Box

Filter Medium Material	Microfiber
Usage/Application	Home, Industry, Medical, Engineering
Flow Capacity Range	0-500 cfm
Diameter	>4″
Purifying Technology	Hepa
Air Volume	400 m3/h

We have uniquely positioned ourselves as a dependable firm, engaged in manufacturing, trading, exporting and supplying a commendable array of HEPA Filter Terminal Box. The offered terminal box is used as boxes for flange type HEPA filter. This product is manufactured using excellent quality raw material and latest technology by our skilled professionals. In order to ensure quality, this is stringently tested on various parameters by our experts. Apart from this, clients can avail the offered terminal box from us at market leading prices.

Features:

Highly efficient
Sturdiness
Anti corrosive body

Terminal filter boxes are normally used as boxes for flange type hepa filter made from s. W. G 16 gauge C. R. C. A sheets for overall construction with epoxy powder coated finish. Housing box for hepa filter is complete with:

Inside M. S. Angle frames duly powder coated
Hold fast (grounding arrangement/ceiling suspension angles)
Fixing and tightening bolts
Flexible canvas connection for two-side aluminum flange
Perforated aluminum sheets, duly powder coated and fixing screws.

Dry Type Microvee Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Industrial
Filtration Grade	Pre Filter
Shape	Square
Size	610x610x305 mm

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Micro V Dry Air Filter

Minimum Order Quantity	12 Number
Brand	Enviro Tech Industrial Products
Rated Flow(m3/hr)	2000 CFM
Min Working Pressure	25 MM WC
Filtration Grade	Hepa Filter, Pre Filter, Ulpa Filter, Medium Filter
Medium Material	Microfiber, Synthetic Fiber
Construction	Cartridge Filter, Panel Filter, Box Filter, Bag Filter, Wire Mesh

Among these we offer Micro-V Dry Air Filter These have been specially designed to meet the requirement of clean air in general ventilation and air conditioning system in Hospitals, Synthetic fiber industries and compressor applications.

Construction: The heart of the filters is a reinforced washable synthetic non-woven filter media/fire retardant glass fiber media pleated in a format along with the support of wire/HDPE netting. The mediums are carefully selected to offer the best possible performance to suit the specific need. In order to obtain uniformity of dust loading the filter pleats are kept apart by means of aluminium separators.

Media: The media is a special synthetic non-woven bounded fiber designed to give high efficiency and long service life. It is pressed in the form of a fabric and given special treatment which prevents fungus growth. An alternative media in superior felt is also available, which gives long run trouble free services, and economical in usage.

Features:

Efficiency : 99.9% down to 5 microns
Pressure drop : 6.5 mm of wg. At rated flow
Frame : Galvanized steel sheet/MS/ Aluminium/ stainless steels sheet
Finish : Painted/ powder coated
Filter media : Synthetic Non-woven filter media supported with HDPE mesh and Gl/aluminium Expanded mesh
Media : Pleated
Sealant : Available
Type : Box type / Flange type

Specifications of Standard Models:

Model No.	Nominal Dimension Millimeters Inches		Rated Capacity @ 6.5 WG M³ / Hr CFM		App. Wt. (Kg.)
DP – 6001	254x254x85	10x10x3.25	170	100	5
DP – 6002	508x254x85	20x10x3.25	330	195	8
DP – 6003	508x254x152	20x10x6	560	330	10
DP – 6004	508x381x152	20x15x6	890	525	15
DP – 6005	508x381x152	20x20x6	1220	710	18
DP – 6006	610x610x150	24x24x6	1670	1050	25
DP – 6007	610x610x305	24x24x12	3000	1800	50

Micro V Filter

Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Filtration Grade	Hepa Filter,Pre Filter,Ulpa Filter
Min Working Pressure	25 mm WC
Frame Type	Box Type / Flange Type .
Brand	Enviro Tech Industrial Products
Size	610 X 610 X 305 mm
Material	GI Sheet / Aluminium Sheet
Medium Material	Microfiber,Synthetic Fiber
Rated Flow(m3/hr)	2000 CFM

Micro V Filter are designed /constructed with firm aluminum frame/ G.I Frame and having separators in each pleat side. Filters are having the oval hole on flange on four sides for bolting adjustments on side installation.

Box Type Fine Filter

Usage/Application	Clean Room Application
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Thickness	305 mm
Material of construction	GI sheet
Efficiency	95%
Diameter	610 X 610 X 305 mm

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type.

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter Flange Type

Usage/Application	Hospitals Pharmaceuticals
Brand	Enviro Tech Industrial Products
Filtration Grade	Pre Filter
Flow Rate	2000 CFM
Material of construction	Aluminum
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Flange Type.

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

GI Frame Fine Filter

Usage/Application	Laminar Flow Units
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Efficiency	95%
Initial Pressure	25 mm WC

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter Aluminum Frame

Minimum Order Quantity	12 Number
Usage/Application	Clean Room Application
Material	Aluminum
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Box Filter
Material of construction	Aluminum
Efficiency	95%
Is It Washable	Washable
Room Size Feet X Feet X Feet	610 MM X 610 MM X 305 MM
I Deal In	New Only

Fine Filter Aluminum Frame

Enriched By Our Vast Industrial Experience In This Business, We Are Involved In Offering An Enormous Quality Range Of Micro Fine Filter Box Type / Flange Type .
Specifications:
Micron – 3,5,10
Material Used: GI Sheet / Aluminium Sheet
Flow: Standard Flow
Size: 610 MM X 610 MM X 305 MM
Applications:

Laminar Flow UnitsClean Room ApplicationHospitals Pharmaceuticals
Application : IndustrialMaterial : MetalDurability : Long LifeResistivity : Rust ResistantDrive Type : ElectricSurface Finishing : Polished

Additional Information:

Item Code: Fine-Filter-Aluminum-Frame
Production Capacity: www.envirotechdelhi.net
Delivery Time: www.envirotechindustrialproducts.co.in
Packaging Details: www.envirotechindia.info

Fine Filter 5 Micron

Usage/Application	Ahu
Micron ratings	5 mic
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filtration Grade	Pre Filter
Filter Type	Panel Filter
Efficiency	95%

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Applications:

Laminar Flow Units

Clean Room Application

Hospitals Pharmaceuticals

Fine Filter 3 Micron

Usage/Application	Laminar Flow Units
Brand	Enviro Tech Industrial Products
Filtration Medium Material	Non Woven Synthetic Filter Media
Filter Type	Box Filter
Flow Rate	2000 cfm
Shape	Rectangle
Efficiency	95 %

Enriched by our Vast Industrial Experience in This Business, we are involved in offering an Enormous Quality Range of Micro Fine Filter Box Type / Flange Type .

Super Fine Filters

Frame	Al. Andoized/ GL/ SS 304
Gasket	Sponge/ Foam/ Felt
Initial Pressure Drop	12 mm
Face Guard	Aluminium/ GI/SS-Expanded/ None
Separators	Aluminium /GI/SS

We are offering Super Fine Filters to our client.

Specifications:

frame : aluminum, s.s,gi, box type / flange type
adhesive: epoxy based adhesive for leak proof joint between filter media and casing.
gasket: felt / natural rubber / pe foam gaskets as per customer choice for sealing the filters on mounting frames.
temperature & humidity : recommended for operating temperature : up to 75°c. operating humidity up to 100% rh, high temp. against order.
cleaning : washable by detergent / water solution or by air! vacuum cleaner as per design.
product range : filters are available with air handling capacity in the range of 170 cubic meter! hr (100 cfm) to 3400 cubic meter / hr. (2000 cfm) : filter -grade from g3 to f9 (20 micron to 1 micron) plated hdpe mesh or special grade felt are used in pre-filters, which have filtration capacity for 10 micron and larger size particles. non-woven filter fabric is used in fine or microwave filters which have filtration capacity for 5 micron and larger particles, in both washable as well as non-washable type.

Microvee Type Fine Filter

Brand	Enviro Tech Industrial Products
Usage/Application	Industrial
Frame Type	Al. Andoized/ GL/ SS 304
Sealing Type	Expoxy/Foam
Size	610x610x305 mm
Initial Pressure Drop	12 mm of WC
Recommended Final Pressure Drop	25 mm OF WC

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Panel Microvee Filter

Brand	Enviro Tech Industrial Products
Material	Aluminium anodized
Usage/Application	Industries Like Chemical Process, Food Processing, Electronics
Size	610x610x305 mm
Thickness	10 mic
Shape	Rectangle

In order to keep pace with never ending demands of clients, our company offers Panel Microvee Filter.

Features:

High Dwell Time
Low Pressure Drop
Long Life
High Dust Holding Capacity

Digital Differential Pressure Gauge A1 – Sensocon

Digital Differential Pressure Gauge Series A1

Digital Differential Pressure Gauge Series A1

The Series A1 Digital Differential Pressure Gauge is a patented microprocessor based digital pressure gage for positive, negative,and differential measurement designed to be a direct replacement for mechanical gauges.The Series A1 digital differential pressure gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%.For applications requiring better accuracy, the A1 is also available with 0.5% or 0.25% accuracy.The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal.The A1 features a bright ½” LED display,which gives the gauge improved readability and precision.The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in.w.c., mm w.c.,cm w.c.,kPa, and Pa.The Series A1 offers an improved look,and performance compared to mechanical gauges.

SPECIFICATION

Maximum Pressure:Ranges -00 to -07 = 2 PSI (13.8kPa)
Ranges -08 to -12 = 10 PSI (68.9pKa)
Media Compatibility:Air and Compatible Non-Combustible, Non-Corrosive Gases
Accuracy:1.0%, 0.5%,or 0.25%Temperature Ranges:Compensated and Operating:-10° to 140°F (-23° to 60°C) Thermal Effect:+/- 0.02% FS/°F Output Signal:4-20 mA (option) Loop Resistance:750 Ω Max (for internally sourced power);1800 Ω Max (for externally sourced power of 36 VDC) Power Supply:Universal 24-240 VAC or VDC Housing Material:Glass Filled Nylon Enclosure Rating:Designed to meet NEMA 4X (IP 65) face;with optional
cover the entire product is weatherproof Electrical Connections:screw terminals Response Time:<100 ms Display:4 Digit,Red LED,½” (12.7mm) digits Process Connection:Push on connection for 3/16″ (5MM) Tubing Agency Approvals:CE

Custom calibration including improved accuracy and thermal effect are available.

Sensocon Digital Differential Pressure Gauge Modal A1000-00

Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|+-60 Pa
Model Name/Number	A1000-00
Usage/Application	Industrial
Connection	3/16″ NPT
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-00
Color	Black
Scale Range	+-0.25″ WC\|\|+-60 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Warranty	1 YERS
Series	A1
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-00

Digital Differential Pressure Gauge, ±1.00%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1000-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±0.25″ WC||±60 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±0.25″ WC, ±60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:PNL MOUNT DISPLAY, 1%, 0.25IN (60 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1000-01
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-01

Digital Differential Pressure Gauge, ±1.00%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1000-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±0.50″ WC, 125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±0.50″ WC||±125 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description:PNL MOUNT DISPLAY, 1%, 0.50IN (125 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-10

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1000-10
Usage/Application	Industrial
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-10

Digital Differential Pressure Gauge, ±1.00%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1000-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±20.00″ WC||±5000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-11

Minimum Order Quantity	1 Piece
Dial Size	5.00″
Accuracy	+-1.00%
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Usage/Application	Industrial
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-11
Display Type	YAS
Brand	Sensocon USA
Model Name/Number	A1000-11
Warranty	1 YERS
Mounting	Center Back Mount
Signal Output	Optional 4-20 mA output
Power	24-240 VAC/VDC
Design	Digital
Color	Black
Thread Connection	3/16″ NPT
I Deal In	New Only
Packaging Type	1 NOS
Diameter	5.00″
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-11

Digital Differential Pressure Gauge, ±1.00%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±30.00″ WC||±7500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-12

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1000-12
Usage/Application	Industrial
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-12

Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1000-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±40.00″ WC||±10000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-13

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1000-13
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-13

Digital Differential Pressure Gauge, ±1.00%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±50.00″ WC||±12500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-02

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1000-02
Usage/Application	Industrial
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-02

Digital Differential Pressure Gauge, ±1.00%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1000-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±1.00″ WC||±250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1000-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-03

Digital Differential Pressure Gauge, ±1.00%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1000-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±2.00″ WC||±500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 2.0IN (500 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-04

Dial Size	5.00″
Connection	New
Accuracy	+-1.00%
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-04
Usage/Application	Industrial
Display Type	Yas
Brand	Sensocon USA
Model Name/Number	A1000-04
Mounting	Center Back Mount
Signal Output	Optional 4-20 mA output
Power	24-240 VAC/VDC
Design	Digital
Color	Black
Thread Connection	3/16″ NPT
I Deal In	New Only
Packaging Type	1 NOS
Series	A1
Diameter	5.00″
Scale Range	+-3.00″ WC\|\|+-750 Pa
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-04

Digital Differential Pressure Gauge, ±1.00%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1000-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±3.00″ WC||±750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 3.0IN (750 PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1000-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-05
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-05

Digital Differential Pressure Gauge, ±1.00%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1000-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range:±4.00″ WC||±1000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 4.0IN (1.0 K PA)

Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1000-06

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1000-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	yas
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-06

Digital Differential Pressure Gauge, ±1.00%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1000-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa,
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Additional Information:

Item Code: A1000-06
Production Capacity: www.envirotechindustrialproducts.co.in
Delivery Time: www.envirotechindustrialproduct.co.in
Packaging Details: www.envirotechindustrialproduct.in

Sensocon Digital Differential Pressure Gauge Modal A1000-08

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1000-08
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-08

Digital Differential Pressure Gauge, ±1.00%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1000-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-07

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1000-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-07

Digital Differential Pressure Gauge, ±1.00%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1000-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-02

Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1001-02
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-0.50%
Diameter	5.00″
Weight	Digital
Power	24-240 VAC/VDC
Dial Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-02

Digital Differential Pressure Gauge, ±0.50%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1001-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±1.00″ WC||±250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1001-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1001-01
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-01

Digital Differential Pressure Gauge, ±0.50%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1001-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±0.50″ WC, ±125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.50″ WC||±125 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

Sensocon Digital Differential Pressure Gauge Modal A1000-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1000-09
Usage/Application	Industrial
Material	Aluminium
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1000-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-1.00%
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1000-09

Digital Differential Pressure Gauge, ±1.00%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1000-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±1.00%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±1.00%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-10

Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1001-10
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-0.50%
Design	DIGITAL
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-10

Digital Differential Pressure Gauge, ±0.50%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1001-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±20.00″ WC||±5000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 20.0IN (5.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-11

Brand	Sensocon USA
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Model Name/Number	A1001-11
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-11
Color	Black
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Accuracy	+-0.50%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-11

Digital Differential Pressure Gauge, ±0.50%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±30.00″ WC||±7500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 30.0IN (7.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-12

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1001-12
Usage/Application	Industrial
Material	Aluminium
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-0.50%
Design	Digital
Power	24-240 VAC/VDC
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-12

Digital Differential Pressure Gauge, ±0.50%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1001-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±40.00″ WC||±10000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 40.0IN (10 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-13

Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1001-13
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-0.50%
Power	24-240 VAC/VDC
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-13

Digital Differential Pressure Gauge, ±0.50%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±50.00″ WC||±12500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%,50.0IN (12.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1001-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-0.50%
Design	Digital
Diameter	5.00″
Power	24-240 VAC/VDC
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-03

Digital Differential Pressure Gauge, ±0.50%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1001-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±2.00″ WC||±500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 2.0IN (500 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-04

Brand	Sensocon USA
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Model Name/Number	A1001-04
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-04
Color	Black
Scale Range	+-3.00″ WC\|\|+-750 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-04

Digital Differential Pressure Gauge, ±0.50%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1001-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±3.00″ WC||±750 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 3.0IN (750 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1001-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Yas
Type	Digital
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-05

Digital Differential Pressure Gauge, ±0.50%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1001-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±4.00″ WC||±1000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 4.0IN (1.0 K PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-06

Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1001-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-06

Digital Differential Pressure Gauge, ±0.50%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1001-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-07

Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1001-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	YAS
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YEAR
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-07

Digital Differential Pressure Gauge, ±0.50%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1001-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-08

Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1001-08
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-08

Digital Differential Pressure Gauge, ±0.50%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1001-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description:DIAL GAUGE, DIGITAL, ±0.50%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 10.0IN (2.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1001-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1001-09
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1001-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-0.50%
Diameter	5.00″
Power	24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1001-09

Digital Differential Pressure Gauge, ±0.50%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1001-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.50%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.50%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.50%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.50%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-00

Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|60 Pa
Model Name/Number	A1002-00
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-00
Color	Black
Scale Range	+-0.25″ WC\|\|60 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	1 YERS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-00

Digital Differential Pressure Gauge, ±0.25%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1002-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.25″ WC||60 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±0.25″ WC, 60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 0.25IN (60 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-01

Minimum Order Quantity	1 Piece
Brand	Sensocon USA
Measuring Range	+-0.50″ WC\|\|+-125 Pa
Model Name/Number	A1002-01
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-01
Color	Black
Scale Range	+-0.50″ WC\|\|+-125 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	Yas
Series	A1
Packaging Type	1 Nos
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-01

Digital Differential Pressure Gauge, ±0.25%, ±0.50″ WC, ±125 Pa
Manufacturer:Sensocon USA
MPN:A1002-01

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±0.50″ WC, ±125 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.50″ WC||±125 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±0.50″ WC, ±125 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 0.50IN (125 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-10

Brand	Sensocon USA
Measuring Range	+-20.00″ WC\|\|+-5000 Pa
Model Name/Number	A1002-10
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-10
Color	Black
Scale Range	+-20.00″ WC\|\|+-5000 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-10

Digital Differential Pressure Gauge, ±0.25%, ±20.00″ WC, ±5 kPa
Manufacturer:Sensocon USA
MPN:A1002-10

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±20.00″ WC, ±5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±20.00″ WC||±5000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±20.00″ WC, ±5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 20.0IN (5.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-11

Brand	Sensocon USA
Measuring Range	+-30.00″ WC\|\|+-7500 Pa
Model Name/Number	A1002-11
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-11
Color	Black
Scale Range	+-30.00″ WC\|\|+-7500 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-11

Digital Differential Pressure Gauge, ±0.25%, ±30.00″ WC, ±7.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-11

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±30.00″ WC, ±7.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±30.00″ WC||±7500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±30.00″ WC, ±7.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 30.0IN (7.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-12

Brand	Sensocon USA
Measuring Range	+-40.00″ WC\|\|+-10000 Pa
Model Name/Number	A1002-12
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-12
Color	Black
Scale Range	+-40.00″ WC\|\|+-10000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-12

Digital Differential Pressure Gauge, ±0.25%, ±40.00″ WC, ±10 kPa
Manufacturer:Sensocon USA
MPN:A1002-12

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±40.00″ WC, ±10 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±40.00″ WC||±10000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±40.00″ WC, ±10 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUN
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 40.0IN (10 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-13

Brand	Sensocon USA
Measuring Range	+-50.00″ WC\|\|+-12500 Pa
Model Name/Number	A1002-13
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-13
Color	Black
Scale Range	+-50.00″ WC\|\|+-12500 Pa
Accuracy	+-0.25%
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-13

Digital Differential Pressure Gauge, ±0.25%, ±50.00″ WC, ±12.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-13

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±50.00″ WC, ±12.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±50.00″ WC||±12500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±50.00″ WC, ±12.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 50.0IN (12.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-02

Brand	Sensocon USA
Measuring Range	+-1.00″ WC\|\|+-250 Pa
Model Name/Number	A1002-02
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-02
Color	Black
Scale Range	+-1.00″ WC\|\|+-250 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-02

Digital Differential Pressure Gauge, ±0.25%, ±1.00″ WC, ±250 Pa
Manufacturer:Sensocon USA
MPN:A1002-02

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±1.00″ WC, ±250 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±1.00″ WC||±250 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±1.00″ WC, ±250 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 1.0IN (250 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-03

Brand	Sensocon USA
Measuring Range	+-2.00″ WC\|\|+-500 Pa
Model Name/Number	A1002-03
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-03
Color	Black
Scale Range	+-2.00″ WC\|\|+-500 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-03

Digital Differential Pressure Gauge, ±0.25%, ±2.00″ WC, ±500 Pa
Manufacturer:Sensocon USA
MPN:A1002-03

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±2.00″ WC, ±500 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±2.00″ WC||±500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±2.00″ WC, ±500 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 2.0IN (500 PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-04

Brand	Sensocon USA
Measuring Range	+-3.00″ WC\|\|+-750 Pa
Model Name/Number	A1002-04
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-04
Color	Black
Scale Range	+-3.00″ WC\|\|+-750 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-04

Digital Differential Pressure Gauge, ±0.25%, ±3.00″ WC, ±750 Pa
Manufacturer:Sensocon USA
MPN:A1002-04

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±3.00″ WC, ±750 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±3.00″ WC||±750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±3.00″ WC, ±750 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 3.0IN (750 PA)
Manufacturer:Sensocon USA

Additional Information:

Item Code: A1002-04
Production Capacity: www.envirotechindustrialproducts.in
Delivery Time: www.envirotechindustrialproduct.com
Packaging Details: www.envirotechindustrialproducts.com

Sensocon Digital Differential Pressure Gauge Modal A1002-05

Brand	Sensocon USA
Measuring Range	+-4.00″ WC\|\|+-1000 Pa
Model Name/Number	A1002-05
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-05
Color	Black
Scale Range	+-4.00″ WC\|\|+-1000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-05

Digital Differential Pressure Gauge, ±0.25%, ±4.00″ WC, ±1 kPa
Manufacturer:Sensocon USA
MPN:A1002-05

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±4.00″ WC, ±1 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±4.00″ WC||±1000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±4.00″ WC, ±1 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 4.0IN (1.0 K PA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-06

Brand	Sensocon USA
Measuring Range	+-5.00″ WC\|\|+-1250 Pa
Model Name/Number	A1002-06
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-06
Color	Black
Scale Range	+-5.00″ WC\|\|+-1250 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	Yas
Warranty	Yas
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-06

Digital Differential Pressure Gauge, ±0.25%, ±5.00″ WC, ±1.25 kPa
Manufacturer:Sensocon USA
MPN:A1002-06

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±5.00″ WC, ±1.25 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±5.00″ WC||±1250 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±5.00″ WC, ±1.25 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: MOUNT DISPLAY, 0.25%, 5.0IN (1.25 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-07

Brand	Sensocon USA
Measuring Range	+-8.00″ WC\|\|+-2000 Pa
Model Name/Number	A1002-07
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-07
Color	Black
Scale Range	+-8.00″ WC\|\|+-2000 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-07

Digital Differential Pressure Gauge, ±0.25%, ±8.00″ WC, ±2.0 kPa
Manufacturer:Sensocon USA
MPN:A1002-07

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±8.00″ WC, ±2.0 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±8.00″ WC||±2000 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±8.00″ WC, ±2.0 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 8.0IN (2.0 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-08

Brand	Sensocon USA
Measuring Range	+-10.00″ WC\|\|+-2500 Pa
Model Name/Number	A1002-08
Usage/Application	Industrial
Material	Aluminium
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-08
Color	Black
Scale Range	+-10.00″ WC\|\|+-2500 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-08

Digital Differential Pressure Gauge, ±0.25%, ±10.00″ WC, ±2.5 kPa
Manufacturer:Sensocon USA
MPN:A1002-08

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±10.00″ WC, ±2.5 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±10.00″ WC||±2500 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±10.00″ WC, ±2.5 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 10.0IN (2.5 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1002-09

Brand	Sensocon USA
Measuring Range	+-15.00″ WC\|\|+-3750 Pa
Model Name/Number	A1002-09
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1002-09
Color	Black
Scale Range	+-15.00″ WC\|\|+-3750 Pa
Accuracy	+-0.25%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1002-09

Digital Differential Pressure Gauge, ±0.25%, ±15.00″ WC, ±3.75 kPa
Manufacturer:Sensocon USA
MPN:A1002-09

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±0.25%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, ±0.25%, ±15.00″ WC, ±3.75 kPa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±15.00″ WC||±3750 Pa
Short Description: DIAL GAUGE, DIGITAL, ±0.25%, ±15.00″ WC, ±3.75 KPA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 0.25%, 15.0IN (3.75 KPA)
Manufacturer:Sensocon USA

Sensocon Digital Differential Pressure Gauge Modal A1010-00

Minimum Order Quantity	1 Number
Brand	Sensocon USA
Measuring Range	+-0.25″ WC\|\|60 Pa
Model Name/Number	A1010-00
Usage/Application	Industrial
Material	Aluminium
Connection	New
Display Type	Digital
Type	Sensocon Digital Differential Pressure Gauge Modal A1010-00
Color	Black
Scale Range	+-0.25″ WC\|\|60 Pa
Accuracy	+-1.00%
Design	Digital
Diameter	5.00″
Power	Universal Power 24-240 VAC/VDC
Dial Size	5.00″
Signal Output	Optional 4-20 mA output
Size	5.00″
Mounting	Center Back Mount
Thread Connection	3/16″ NPT
Calibration	YAS
Warranty	YAS
Series	A1
Packaging Type	1 NOS
I Deal In	New Only
Battery Included	No
Country of Origin	Made in India

Sensocon Digital Differential Pressure Gauge Modal A1010-00

Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±0.25″ WC, 60 Pa
Manufacturer:Sensocon USA
MPN:A1010-00

Availability: Usually Ships in Less Than 6-7 Week

PRODUCT SPECIFICATIONS

Accuracy:±1.00%
Connection:3/16″ NPT
Description:Digital Differential Pressure Gauge, 4-20 mA, ±1.00%, ±0.25″ WC, 60 Pa
Dial Size:5.00″
Direction:Bi-Directional
Filling:Dry
Measurement:Inches of Water Column||Pascals
Mount:Center Back Mount
Range: ±0.25″ WC||60 Pa
Short Description: DIAL GAUGE, DIGITAL, ±1.00%, ±0.25″ WC, 60 PA, 5.00″ DIAL, 3/16″ NPT, DRY, CENTER BACK MOUNT
Type:Digital

PRODUCT FAMILY FEATURES

Mounts in Industry Standard Holes
1.6? (41 mm) Panel Depth
LED or OLED Program Display
Measures Flow & Velocity
Optional 4-20 mA output
Universal power 24-240 VAC/VDC
Two 8A SPDT Relays

MORE INFORMATION & RELATED DOCUMENTS

Family Description:

The Sensocon Series A1 and A2 Digital Differential Pressure Gauges Utilize a Patent Pending Microprocessor Based Digital Pressure Gage For Positive, Negative, and Differential Measurement Designed to be a Direct Replacement for Mechanical Gauges. The Series A Digital Differential Pressure Gauges utilize an extremely stable piezoresistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the Series A1 and A2 are Also Available with 0.5% or 0.25% accuracy. The Series A1 and A2 also Have an optional 4-20 mA output for applications requiring an output signal. While the A1 features a bright LED Display, the A2 adds a bright process arch which Gives the Gauge Improved Visibility, readability and precision. Both the Series A1 and A2 Digital Differential Pressure Gauges also Feature 5 User Selectable Engineering units including inches of W.C., mm W.C., cm W.C., kPa, and Pa. The Sensocon Series A3 and A4 Digital Differential Pressure Controllers are a patent pending Microprocessor Based Pressure Controllers For Positive, negative, and Differential Pressure as well as Velocity and Flow. These Series A3 and A4 Differential Pressure Controllers include (2) 8A SPDT relays and an associated Programming Menu That Allows Full Configuration of Variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user Friendly menu on the LCD(A3) or OLED (A4) display or uploaded using an Opti Link.

ENVIRO TECH Description: PNL MOUNT DISPLAY, 1%, 0.25IN (60 PA), 4-20 MA
Manufacturer:Sensocon USA

Aerosense Series ASG Differential Pressure Gauge Wholesaler

Aerosense Model ASGC-02 INCH Differential Pressure Gauge Range 1-0-1 Inch

Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-04 INCH Differential Pressure Gauge Range 2-0-2 Inch

Model Number	ASGC-04
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10 INCH Differential Pressure Gauge Range 5-0-5 INCH

Brand	Aerosense
Model Name/Number	ASGC-10 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure – either positive, negative or differential.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20 INCH Differential Pressure Gauge Range 10-0-10 Inch

Brand	Aerosense
Model Name/Number	ASGC-20 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30 INCH Differential Pressure Gauge Range 15-0-15 Inch

Brand	Aerosense
Model Name/Number	ASGC-30 inch
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections	1/8″ female NPT

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-15CM Differential Pressure Gauge Range 0-15 CM of Water

Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-20CM Differential Pressure Gauge Range 0-20 CM of Water

Model Number	ASG-20CM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Brand	Aerosense
Measuring Range	0-25 CM of Water
Model Name/Number	ASG-25CM
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Aerosense Model ASG-25CM Differential Pressure Gauge Range 0-25 CM of Water

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-50CM Differential Pressure Gauge Range 0-50 CM of Water

Brand	Aerosense
Model Name/Number	ASG-50CM
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-80CM Differential Pressure Gauge Range 0-80 CM of Water

Brand	Aerosense
Model Name/Number	ASG-80CM
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100CM Differential Pressure Gauge Range 0-100 CM of Water

Brand	Aerosense
Model Name/Number	ASG-100CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-150CM Differential Pressure Gauge Range 0-150 CM of Water

Brand	Aerosense
Model Name/Number	ASG-150CM
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-200CM Differential Pressure Gauge Range 0-200 CM of Water

Model Number	ASG-200CM
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250CM Differential Pressure Gauge Range 0-250 CM of Water

Model Number	ASG-250CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-300CM Differential Pressure Gauge Range 0-300 CM of Water

Model Number	ASG-300CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-6MM Differential Pressure Gauge Range 3 -0-3 mm

Model Number	ASGC-6MM
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10MM Differential Pressure Gauge Range 5 -0-5 mm

Model Number	ASGC-10MM
Usage/Application	Filter monitoring
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-20MM Differential Pressure Gauge Range 10 -0-10 mm

Model Number	ASGC-20MM
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Brand	Aerosense
Measuring Range	0.125-0-0.125 Inch
Model Name/Number	ASGC-00 inch
Usage/Application	Industrial
Material	Mild Steel
Connection	New
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Aerosense Model ASGC-00 INCH Differential Pressure Gauge Range 0.125-0-0.125 Inch

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differe

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60”C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-01 INCH Differential Pressure Gauge Range 0.5-0-0.5 INCH

Brand	Aerosense
Model Name/Number	ASGC-01inch
Accuracy	+-2% of full scale
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-0 INCH Differential Pressure Gauge Range 0.25-0-0.25 Inch

Brand	Aerosense
Model Name/Number	ASGC-0 inch
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF

Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Model Number	ASGC-1KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2KPA Differential Pressure Gauge Range 1-0-1 KPA

Model Number	ASGC-2KPA
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-2.5KPA Differential Pressure Gauge Range 1.25-0-1.25 KPA

Model Number	ASGC-2.5KPA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-3KPA Differential Pressure Gauge Range 1.5-0-1.5 KPA

Model Number	ASGC-3KPA
Usage/Application	Filter monitoring
Brand	Aerosense
Weight	510 g
Size	4″ (101.6 mm) diameter dial face
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-4CM Differential Pressure Gauge Range 2-0-2 CM

Model Number	ASGC-4CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-10CM Differential Pressure Gauge Range 5-0-5 CM

Model Number	ASGC-10CM
Usage/Application	Blower Vacuum Monitoring
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-30CM Differential Pressure Gauge Range 15-0-15 CM

Model Number	ASGC-30CM
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60NPA Differential Pressure Gauge Range 10-0-50 PA

Model Number	ASG-60NPA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-60PA Differential Pressure Gauge Range 0-60 PA

Model Number	ASG-60PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-100PA Differential Pressure Gauge Range 0-100 PA

Model Number	ASG-100PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-125PA Differential Pressure Gauge Range 0-125 PA

Model Number	ASG-125PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-250PA Differential Pressure Gauge Range 0-250 PA

Model Number	ASG-250PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-500PA Differential Pressure Gauge Range 0-500 PA

Model Number	ASG-500PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-750PA Differential Pressure Gauge Range 0-750 PA

Model Number	Series ASG
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2%
Temperature	20 to 140 degF
Size	4″
Housing Material	Die cast aluminium
Pressure Limits	20 in hg
Over Pressure	25 psig

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASG-1000PA Differential Pressure Gauge Range 0-1000 PA

Model Number	ASG-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-60PA Differential Pressure Gauge Range 30-0-30 PA

Model Number	ASGC-60PA
Usage/Application	Fan Pressure Indication
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″ female NPT
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-100PA Differential Pressure Gauge Range 50-0-50 PA

Model Number	ASGC-100PA
Usage/Application	Fan Pressure Indication
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Brand	Aerosense
Housing Material	Die cast aluminum case
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-200PA Differential Pressure Gauge Range 100-0-100 PA

Model Number	ASGC-200PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Housing Material	Die cast aluminum case
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-120PA Differential Pressure Gauge Range 60-0-60 PA

Model Number	ASGC-120PA
Usage/Application	Fan Pressure Indication
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-250PA Differential Pressure Gauge Range 125-0-125 PA

Model Number	ASGC-250PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Accuracy	+-2% of full scale
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm)
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Temperature Limits	20 to 140degF
Process Connections	1/8″ female NPT

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specification:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-300PA Differential Pressure Gauge Range 150-0-150 PA

Model Number	ASGC-300PA
Usage/Application	Duct, Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Temperature Limits	20 to 140degF
Pressure Limits	-20 in Hg
Over Pressure	25 psig
Process Connections	1/8″

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-500PA Differential Pressure Gauge Range 250-0-250 PA

Model Number	ASGC-500PA
Usage/Application	Clean Room Positive Pressure Indication
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Aerosense Model ASGC-1000PA Differential Pressure Gauge Range 500-0-500 PA

Model Number	ASGC-1000PA
Usage/Application	Duct,Room or Building Pressures
Brand	Aerosense
Weight	1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Process Connections	1/8″
Temperature Limits	20 to 140degF
Over Pressure	25 psig
Pressure Limits	-20 in Hg

Product Applications:

Filter monitoring
Blower Vacuum Monitoring
Fan Pressure Indication
Duct, Room or Building Pressures
Clean Room Positive Pressure Indication

Specifications:

Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
Temperature Limits: 20 to 140“F*(-6.67 to 60’C).*low Temperature models available as special option.
Size: 4″ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps • one pair back.
Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Company Insights

ABOUT US

Our Business Philosophy

ENVIRO TECH INDUSTRIAL PRODUCTS is the company promoted in India by the Executives having a combined experience of more then 19 years in the filter & Air Conditioning industry. The company was started its operation in India in November 1995. We, Enviro Tech Industrial Products are a reputed name for Manufacturing Variety of Air Filters & Air Conditioning Related Components. By providing clean air solutions to a large number of customers from power generation, refineries & petrochemicals, engineering, pharmaceuticals, food, beverages and allied industries, we have earned recognition in the market. The product range of industrial filters, we offer include Air Filter, Pre Filter, Fine Filter, Hepa Filter, Mini Pleat Hepa Filter, Bag Filter, Hi-Tem. Hepa Filter, Air Pipeline Filters, Gas Pipeline Filters, Liquid Pipeline Filters, Pocket Filters, Vacuum Filters, Hvac Filters, Wire Mesh Filter, Fuel Filters, Microvee Filter, activated carbon filters,Rod Type Filter,Rod Type Pre Filter,AHU UNIT,Air Curtain,Air Washer,Axial Flow Fan,Cellulose Paper Pad, Fan Coil Unit, Fresh Air Unit,Grill,Damper, Diffusers, Pressure Relief Damper, Motorized Dampers, Acrylic Inclined Manometer,Magnehelic Gauge, Pass Box, Cooling Tower Fan Hub, Cooling Tower Motors, Cooling Tower Packing Pall Ring, Cooling Tower Sprinkler,Cooling Tower Fan, Cooling Tower Spray Nozzels,Cooling Tower PVC Fills,Air Shower,Laminar Flow Bench,Sampling Dispensing Booth, Our company works under the leadership of Mr.R.P.SHARMA .

Product Applications

Air Conditioning, Showroom, Shopping Mall, Restaurant & Bar, Hotels, Office, Call Centre, Building, Schools, Studio, Institute, Hospital, Pharma company, Clean Room, etc.

ABOUT US

Our USP

ENVIRO TECH INDUSTRIAL PRODUCTS

- Wide experience of more then 21 years
- Expertise in making high purity solvents
- Known in the market for service & Quality
- High commitment towards customer satisfaction
- “Ethics” & “Transparency” are pillars of our business value system.

We, ENVIRO TECH INDUSTRIAL PRODUCTS are a reputed name for Manufacturing Variety of Air Filters & Air Conditioning Related Components.By providing clean air solutions to a large number of customers from power generation, refineries & petrochemicals, engineering, pharmaceuticals, food, beverages and allied industries, we have earned recognition in the market. The product range of industrial filters, we offer include Air Filter, Pre Filter, Fine Filter, Hepa Filter, Mini Pleat Hepa Filter, Bag Filter, Hi-Tem. Hepa Filter, Air Pipeline Filters, Gas Pipeline Filters, Liquid Pipeline Filters, Pocket Filters, Vacuum Filters, Hvac Filters, Wire Mesh Filter, Fuel Filters, Microvee Filter, activated carbon filters,Rod Type Filter,Rod Type Pre Filter,AHU UNIT,Air Curtain,Air Washer,Axial Flow Fan,Cellulose Paper Pad, Fan Coil Unit, Fresh Air Unit,Grill,Damper, Diffusers, Motorized Dampers, Acrylic Inclined Manometer, Magnehelic Gauge, Pass Box, Cooling Tower Fan Hub, Cooling Tower Motors, Cooling Tower Packing Pall Ring, Cooling Tower Sprinkler,Cooling Tower Fan, Cooling Tower Spray Nozzels,Cooling Tower PVC Fills,Air Shower,Laminar Flow Bench,Sampling Dispensing Booth Our Company Works under the leadership of Mr.RP.SHARMA .

Product Applications

Websites :-
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.in
www.envirotechindustrialproduct.com
www.envirotechindustrialproducts.com
www.envirotechindustrialproducts.in
www.envirotechindustrialproducts.net

Air Conditioning
Showroom
Shopping Mall
Restaurant & Bar
Hotels
Office
Call Centre
Building
Schools
Studio
Institute
Hospital
Pharma company
Clean Room, etc.

Elementor #1257

RHP-2D10 DWYER Humidity Temperature Transmitter
Rs 9,500 / Piece
Brand	DWYER USA
Model Name/Number	RHP-2D10
Usage/Application	Pharma
RHP-2D10 DWYER Humidity Temperature Transmitter Overview Dwyer Instruments Humidity Sensors, RHP Series Item# RHP-2D10 – Duct Mount Humid- Ity Transmitter Wtih 2% Sensor And 4-20 Ma Output RHP Series Information The Series RHP Temperature and Humidity Transmitter Combine the Voltage or Current Humidity Transmitter output with a passive Temperature Thermistor or RTD output. Featuring Polymer Capacitance Humidity Sensors, Models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD Display. Product Applications Air EconomizersOutdoor Temperature and Relative Humidity ReferencePool Room Humidity Monitoring Specifications Item Number: RHP-2D10Brand:Dwyer InstrumentsItem Category:HVAC SensorsSubcategory:Humidity SensorsSeries:RHPApplication:DuctInput:10~35 VDCOutput:4~20 mADisplay:NoneHumidity Range:0 to 100% RHTemperature Sensor:NoApprovals:CEH x W x D:4 in x 4.4 in x 11.75 inNet Weight:8.24 ozGross Weight:1 lb

Model 670 Fume Hood Monitor

Model 670 Fume Hood Monitor

The Model 670 Fume Hood Monitor continuously senses air flow through the face of the fume hood, ensuring safe levels of fresh air are exhausting potentially hazardous fumes eliminating operator exposure. The 670 provides a highly accurate hot wire sensor to detect very low flows common on fume hoods. This fume hood monitor provides several key features such as simplified calibration and mounting, LED safe and alarm status indicators, audible alarm with temporary or permanent horn silence, relay alarm output, sash alarm input and an input for night set-back. The Model 670 comes with everything required to quickly install the unit including a mounting bracket, 24″ of tubing for connecting to the inside of the hood wall and a 120 Volt AC power adapter.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model 660 Air Velocity Monitor

Model 660 Air Velocity Monitor

Model 660 Air Velocity Monitors are a practical, affordable way to continuously monitor for safe air flows through laboratory fume hoods. They are typically installed in the fume hood side fascia and connected to the interior sidewall via 1-18″ flexible tubing. As the exhaust fan draws air through the device, a sensitive constant temperature thermistor measures flow and lights a green (normal), yellow (high) or red (low) LED. An audible alarm also warns of low flow and requires manual resetting. Mounting holes fit standard single gang electrical box.

Product Applications : Warns user if insufficient fume hood face velocity is encountered.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model 530 Air Flow Switch
Brand	DWYER USA
Model Number	Model 530
Model 530 Air Flow Switch The Model 530 air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple, with only two screws needed. Vane fits 6″ or larger ducts. Product Applications : Low air flow condition duct alarm. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series AVFS Air Flow Switch
Brand	DWYER USA
Model Number	Series AVFS
Flow Media Type	Liquid, Gas, Steam
Series AVFS Air Flow Switch The new Series AVFS Adjustable Air Flow Switch complements the Dwyer Instruments line of thermo-anemometer transmitters and handheld instruments. The AVFS is specifically designed to monitor air flow in ducts and provides a 3A contact output to indicate a change or loss of flow. Simply turn on the fan or air handling unit and adjust the set-point via the potentiometer to show normal status. Then alter a damper or decrease fan speed to activate the AVFS. The AVFS will signal a loss of flow and the N.O. SPST output will indicate the detected decrease. For ease of installation and system troubleshooting, the Series AVFS possesses a redgreen LED indication to provide local status if the air flow is above (green) or below (red) the set-point. The AVFS provides a ±5% set-point repeatability across a full scale range of 1-10 ms (197-1969 fpm) and includes a mounting bracket for quick duct mounting. The AVFS Series Adjustable Air Flow Switches come in a compact, rugged PBT enclosure that is rated NEMA 4X (IP65), making them ideal for any ventilation system installation or similar BAS application. Product Applications : Fan monitoring,Damper feedback,Filter monitoring,Air handlers. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series AVU Air Velocity Transmitter

Series AVU Air Velocity Transmitter

The Dwyer Series AVU Air Velocity Transmitter is ideal for a wide range of HVAC measurement and control applications, particularly in complete building control and energy management systems. The Series AVU offers 5% accuracy at a surprisingly low cost, with six units covering ranges from 0-785 fpm to 0-3150 fpm, with either 4-20 mA or 0-10 VDC output.

The Series AVU Transmitter operates by measuring the heat loss from one of the two sensing elements in the air-stream, then calculating the air velocity. Units are virtually immune to drift due to the design of the sensing element, which makes the transmitter accurate over the whole air velocity range.

Product Applications : Supply and Exhaust Fan Tracking,Clean Room Systems,Medical Rooms

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

The Series AVU Transmitter operates by measuring the heat loss from one of the two sensing elements in the air-stream, then calculating the air velocity. Units are virtually immune to drift due to the design of the sensing element, which makes the transmitter accurate over the whole air velocity range.

Product Applications : Supply and Exhaust Fan Tracking,Clean Room Systems,Medical Rooms

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series VTT Hot-Wire Air Velocity Transmitter

Series VTT Hot-Wire Air Velocity Transmitter

The Series VTT Hot-Wire Air Velocity and Temperature Transmitter provides a versatile unit for air velocity and temperature needs. The VTT offers five field-selectable ranges as well as operating in metric (ms, °C) or English (fpm, °F) units. The VTT can measure up to 30 ms (6000 fpm) and 50°C (122°F). The units are available with or without an LCD display which alternates between velocity and temperature. Series VTT can be ordered in duct mount or remote mount configurations with 4-20 mA or 0-10 V outputs. The VTT is a useful transmitter for many common HVAC applications.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series 641 Air Velocity Transmitter

Series 641

Air Velocity Transmitter

Series 641 Air Velocity Transmitter

The new Series 641 Air Velocity Transmitter is the ideal instrument for monitoring air flow. This transmitter uses a heated mass flow sensor which allows for precise velocity measurements at various flow rates and temperatures. The 641’s 16 field selectable ranges provides it the versatility to be selected for several air flow applications. The optional LED produces a complete, low-cost solution for local indication of air flow.

Product Applications : Exhaust Stack Flow Monitoring,HVAC Air Velocity Measurements,Clean Room Fresh Air Supply Etc.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model 641B Air Velocity Transmitter

Model 641B

Ranges of 1.25 MPS to 10 MPS

Model 641B Air Velocity Transmitter
The Model 641B Air Velocity Transmitter uses a heated mass flow sensor technology. It has four user-selectable ranges from 250 FPM to 2000 FPM with four corresponding metric ranges of 1.25 MPS to 10 MPS. The 641 B provides an isolated 4-20 mA output proportional to the velocity.

The Model 641B’s steel sensor allows the unit to be used in dirty air environments. This rugged sensor is ideally suited for quick field cleaning from a simple cloth to a pulse of air from an air source. Proper sensor performance can be maintained in these polluted environments by easily removing dust and debris from the sensor which is problematic for Pitot tubes and other flow sensing transmitters.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series PAFS-1000 Averaging Flow Sensor

Series PAFS-1000

models PAFS-1002 to PAFS-1005

Series PAFS-1000 Averaging Flow Sensor

The Series PAFS-1000 Averaging Flow Sensor is ideal for sensing differential pressure in the inlet section of variable air volume terminal units and fan terminal units. Units can also be used to sense differential pressure at other locations in the main or branch duct systems.

The “H” port senses total pressure and the “L” port senses static pressure. The difference between these signals is the differential, or velocity pressure. For models PAFS-1002 to PAFS-1005, up to four sensing points and lengths of 3-532″ to 9-2932″ (8.02 to 25.26 cm) to accommodate box size diameters of 4″ to 16″ (10.16 to 40.64 cm) are available. For models PAFS-1006 to PAFS -1011, up to 10 sensing points and lengths from 12-12″ to 23-2932″ (31.75 to 60.72 cm) are available to accommodate appropriately sized duct dimensions.

Applications : Zone control in HVAC systems

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series DAFM Duct Air Flow Measuring Probe
Brand	DWYER USA
Model	Series DAFM
Series DAFM Duct Air Flow Measuring Probe The Model DAFM Duct Air Flow Measuring Probe uses evenly distributed total and static pressure measuring points to deliver an accurate measurement of flows in a duct. The Air Flow Measuring Probe can be completely installed from outside of the duct making it very easy to install. With its lightweight and durable construction in addition to its ease of installation, this product lends itself to being used in the HVAC industry. These air flow measuring probes may be ordered for either round or rectangular ducts. In order to ensure accurate measurements you must determine the number of probes needed for your size duct. If the duct is rectangular, then consult the chart to determine appropriate quantity of probes. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series Rhp-w Wall Mount Humidity Transmitter

Series RHP-W Wall Mount Humidity Transmitter
The Series RHP-W Wall Mount HumidityTemperatureDew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. An optional LCD display can be integral to the transmitter or a remote display can be ordered for building balancing or LEED® validation. The LCD display indicates the ambient temperature along with the humidity or dew point. The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point.

The humidity and temperature sensors are field replaceable to reduce service cost and inventory. The humidity and the dew point are measured using a capacitive polymer sensor that completely recovers from 100% saturation. The humidity and dew point can have either a current or voltage output, while the optional temperature output can be a current, voltage, RTD or thermistor. For models with current or voltage for the temperature output, the temperature range is field selectable. For models with resistive thermistors or RTD outputs, please click here for temperature to resistance lookup tables.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series Rhp Temperature Transmitter

Series RHP Temperature Transmitter

The Series RHP Temperature and Humidity Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. The polymer capacitance humidity sensor is not affected by condensation, fog, high humidity, or contaminants. The humidity sensors are available with 2% or 3% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display. The Series RHP is available with interchangeable filter options as well as replaceable sensors.

For models with resistive thermistors or RTD outputs, please click here for temperature to resistance lookup tables.

Application : For duct mount installations, the sintered filter option should be ordered for applications where the humidity transmitter is mounted in the supply air duct after the fan and cooling coils.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series Rhrs Outside Air Humidity Radiation Shield

Series RHRS Outside Air Humidity Radiation Shield

The Series RHRS Radiation Shield protects outside air humidity transmitters from rain and radiated heat. With the curved shape and color of the plates, air flow is able to move across the sensor to keep radiated temperatures from rooftops and surrounding surfaces from affecting humidity readings. For ease of installation, the Series RHRS has integral pipe mounting hardware which can be removed for surface mounting applications. The brackets on the Series RHRS are specifically designed to be installed on the Dwyer Series RHP outside air humidity transmitters with sintered filters. The pipe mounting bracket fits 34″ to 1-12″ iron pipe.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model 657C-1 Relative Humidity Transmitter

Model 657C-1 Relative Humidity Transmitter
The Model 657C-1 Transmitter features the same circuit design as the 657-1 providing two 4-20 mA channels to produce separate output signals for both relative humidity and temperature. However, this model is housed in a tough die cast aluminum protective conduit enclosure with gasketed cover. An internal terminal block is provided for electrical connections. The sensor employed in the 657C-1 features a state-of-the-art integrated polymer film humidity sensor and a thin-film platinum temperature sensor to assure high reliability and rock-solid stability over years of continuous service. Stainless steel probe measures 516″ x 9-110″ (0.8 x 23.1 cm) and can be easily mounted to most ductwork using either of two optional kits.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

HHT Hazardous Area Humidity Transmitter

HHT Hazardous Area Humidity Transmitter

The Series HHT Hazardous Area HumidityTemperature Transmitter takes accurate measurements in the harshest of environments. The transmitter is offered in explosion-proof and intrinsically-safe versions depending on the application’s requirements. The explosion-proof model is offered with 4 to 20 mA output for humidity only. The intrinsically-safe version is offered with 4 to 20 mA output for humidity and temperature. Both versions have an optional two line alphanumeric display to show the current humidity and temperature.

The Series HHT humiditytemperature transmitter is excellent for offshore HVAC applications, dust and grain applications. Intrinsically safe models require an intrinsically safe barrier.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Inclined Manometer
Model	Dwyer Usa
Brand	Dwyer Usa
Inclined Manometer Dwyer® Durablock® Series 250-AF Gages are precision machined 1″ thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002″ to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by “O” rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions. thick : 5/8″ Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Thermal Dispersion Flow Switch

The Series TDS Thermal Dispersion Flow Switch offers solid state flow detection of non-coating liquids for pump and process protection. SPDT output allows for interfacing with remote PLC or relay control device. The adjustable switch point is factory calibrated at 0.2 fps with LED indication of flow and calibration status. Units feature selectable NO or NC operation and are not damaged by over-ranging flow velocities.

calibrated : 0.2 fps

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model AAFS Adjustable Air Flow Paddle Switch
Model No.	Model AAFS
Brand	Dwyer Usa
Model AAFS Adjustable Air Flow Paddle Switch The Model AAFS-1 Adjustable Air Flow Switch is capable of detecting a wide range of air velocities with minimal user calibration. The adjustable screw changes the set point at which the SPDT snap switch engages. Quality features include a stainless steel vane, galvanized steel base, and ABS enclosure. The unit is field adjustable from 200 to 1800 FPM (1 to 9.2 msec). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series 641RM Air Velocity Transmitter

Application

Clean Room Fresh Air Supply,HVAC Air Velocity Measurements,Fan Supply and Exhaust Tracking,Ensure Po

Series 641RM Air Velocity Transmitter with Cable

The Series 641RM is the ideal instrument for monitoring air flow. This transmitter uses a heated mass flow sensor, which allows for precise velocity measurements at various flow rates and temperatures. The 641’s 16 field selectable ranges from 0-250 to 15,000 FPM (0-1.25 to 75 MPS) provide it the versatility to be selected for a multitude of applications. The units 6′ cable which connects the sensing probe with the electronic enclosure allows the enclosure to be mounted where it can be more easily accessed. Longer cable lengths are available fro ducts that are at very high elevations from the plant floor. The optional LED produces a complete, compact solution for local indication of air flow.

Product Applications : Clean Room Fresh Air Supply,HVAC Air Velocity Measurements,Fan Supply and Exhaust Tracking,Ensure Porper Lab Hood Exhaust Flow Rates

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series MAFS Metal Averaging Flow Sensor

Series MAFS

applications in the HVAC industry

Series MAFS Metal Averaging Flow Sensor
The Series MAFS is ideal for use with Dwyer Instruments, Inc. precision air velocity gages, transmitters and switches. The Series MAFS uses evenly distributed total and static pressure measuring points to deliver an accurate measurement of flows in a duct. The blade profile provides enhanced performance with minimal flow disruption in the air stream. The air flow measuring probe can be completely installed from the outside of round or circular ducts, making it very quick to install. With its lightweight and durable construction, in addition to its ease of installation, the MAFS flow sensor lends itself superbly to applications in the HVAC industry.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series AFG Averaging Flow Grid

Brand

DWYER USA

Series AFG Averaging Flow Grid

The Series AFG Flow Grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the AFG Flow Grid is quick and easy, the AFG is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60″.

The AFG Flow Grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate.

How the AFG Flow Grid Works
The AFG Flow Grid consists of two tubes mounted diagonally across a square or rectangular duct, or diametrically across a round duct. The tubes are drilled with a series of equi-spaced holes.

Applications : To display differential pressure, velocity of volume flow using a micro manometer etc.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series FAFM Fan Inlet Air Flow Measuring Probe
Brand	DWYER USA
Model	Series FAFM
Series FAFM Fan Inlet Air Flow Measuring Probe The Model FAFM Fan Inlet Air Flow Measuring Probes use evenly distributed total and static pressure measuring points to deliver an accurate measurement of flows in a fan inlet. The Air Flow Measuring Probes can be completely installed from outside of the fan making it ideal for when proper duct locations are unavailable. With its lightweight and durable construction in addition to its ease of installation, this product lends itself to being used in the HVAC industry. There are two versions of the model FAFM fan inlet air flow probes to choose from depending on the depth of the fan inlet. For fan inlets with depth less than 3-12″ (8.89 cm): Please order a fan inlet probe with an “S” suffix. This probe has a diameter of .375″ (.95 cm). It employs one total flow measuring tube and one static measuring tube. Each probe is covered with an extruded aluminum anodized coat. Each measuring tube has multiple sensing points. For fan inlets with depth greater than 3-12″ (8.89 cm): Please order a fan inlet probe with a “D” suffix. This probe has a diameter of 3-12″ (8.89 cm). It employs extruded aluminum anodized coated probes with both total and static sensors on each tube. Please Note: These are sold in sets of two. A set is necessary in order to ensure an accurate reading. No more than two air flow measurement probes will be needed to obtain an accurate reading. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series FLST Duct Mounted Airflow Measurement Station
Brand	DWYER USA
Model	Series FLST
Series FLST Duct Mounted Airflow Measurement Station The Series FLST Airflow Measurement Station is easy to install — simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. Standard materials consist of a G90 galvanized casing and 6063-T5 anodized aluminum flow sensors, suitable for most HVAC applications. The Series FLST utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other had producing primary elements. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. Total pressure sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. Applications : Sensing fan, blower, and air handler output,Determine duct flow rates in various zones in builiding Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series STRA Duct Mounted Airflow Measurement Station
Brand	DWYER USA
Model	Series STRA
Series STRA Duct Mounted Airflow Measurement Station The Series STRA Airflow Measurement Station is easy to install — simply connect the tubing to the station fittings, then to a differential pressure manometer, gage, transmitter or switch. Single or multiple airflow elements are factory mounted and pre-piped in a casing designed for flanged connection to the duct work. The Series STRA utilizes an airflow averaging element in a head-type device, generating a differential (velocity) pressure signal similar to the orifice, venturi, and other head producing primary elements. It has been developed with a honeycomb airflow straightening section for use in duct systems having highly turbulent conditions at the point of measurement. Strategically located sensing ports continually sample the total and static pressures when inserted normal to flow. Total pressures sensed by the upstream ports are continually averaged within the airflow element in an isolated chamber. The static sensing ports are averaged in a second isolation chamber. Multiple elements are joined together for connection to a differential measurement device (gage, transmitter, etc.) for flow measurement and indication purposes. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series HS Humidity Switch

Brand

DWYER USA

Model No.

Series HS

Series HS Humidity Switch

The microprocessor based Series HS Humidity Switch provides control for humidifying or dehumidifying. Relative humidity, output status, and error messaging can be viewed on the bright green LED. The switch features 9 user defined parameters including setpoint, hysteresis, control type, cycle time, and probe adjustment. Access to programming parameters can be locked for security purposes using the password protection feature. The Series HS includes a fitting clip for panel mounting, gasket, rear terminal cover, and instruction manual.

Product Applications Industrial Chillers,Environmental Chambers,Walk-ins and Freezers,Heat SealersBeer and Wine Chillers,Mug Frosters Etc.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series THC Temperature Switch
Brand	DWYER USA
Model	Series THC
Series THC Temperature Switch Simultaneously measure and control temperature and humidity with the Series THC TemperatureHumidity Switch. The unit offers a 3-digit red display for temperature indication and a 3-digit green display indicating humidity. The Series THC is equipped with four independent relays, two for temperature control and two relays for humidity control. The unit offers 61 programmable parameters for temperature and humidity control including set point, differential, directreverse acting, cycle time, alarm clock time, and decimal point adjustment. In the event of a probe error, the default operation of the relays can be set to open or close. The THC features error or alarm messaging and password protection. The THC TemperatureHumidity Switch accepts up to two temperature probe inputs (sold separately) and a humidity sensor. A humidity sensor with 0-1V, 0-3V (sold separately), or 4-20 mA output can be used with the Series THC. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Series RH-R Temperature Transmitter

Series RH-R Temperature Transmitter
The Series RH-R Humidity Transmitter is the ideal transmitter for those applications where space is limited. The compact sensor is protected by a removable filter. It can be mounted up to 16 feet away from the weatherproof base. The Series RH-R is ideal for environmental chambers, rubber bladder burst detection and air handler applications.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

657-1 Relative Temperature Transmitter

657-1 Relative Temperature Transmitter
The Model 657-1 Transmitter provides two 4-20 mA channels to produce separate output signals for both relative humidity and temperature. This inexpensive device delivers ±2% accuracy for humidity and ±3% for temperature measurements. The sensor employed in the 657-1 features a state-of-the-art integrated polymer film humidity sensor and a thin-film platinum temperature sensor to assure high reliability and rock-solid stability over years of continuous service. Stainless steel probe measures 516″ x 10″ (0.8 x 24.4 cm) and can be easily mounted to most ductwork using either of the two optional kits.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

WHT Weather-Resistant Humidity Transmitter

The Compact Series WHT HumidityTemperature Transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 mA or 0 to 10 VDC output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications.

Space Mount Carbon Dioxide Transmitter

Display Type

Analog, Digital

Space Mount Carbon Dioxide Transmitter

The Ventostat 8000 Series represents a full range of wall mount CO2 and temperature transmitters with display options plus active humidity and temperature outputs.

Features: : Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low cost package,Etc.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series CDX Wall Mount Carbon Dioxide Transmitter

The Series CDX Carbon Dioxide Transmitter is a low cost and high performing CO2 sensor. This product will provide immediate energy savings by functioning in conjunction with building automation systems and allowing the user to effortlessly and effectively control fresh air into preferred areas. On-Demand ventilation using CO2 sensors prevents energy losses from over ventilation while maintaining indoor air quality. The potential for the greatest energy saving occurs in areas where occupancy alters over the duration of the day. The Series CDX Transmitters utilize the patented Automatic Background Calibration (ABC) Logic self-calibration system. ABC Logic virtually eliminates the need for manual calibration in applications where the indoor CO2 level drops to outside levels during unoccupied periods. If the transmitter is being used in an application where a building is continuously occupied 24 hours per day, then the user will permit that the ABC Logic feature be turned off.

Product Applications : On Demand Ventilation

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model CDD Duct Mount Carbon Dioxide Transmitter
Display Type	Analog, Digital
Model	DWYER USA
Model CDD Duct Mount Carbon Dioxide Transmitter The Model CDD Duct Mount Carbon Dioxide Transmitter monitors the occupancy in a room by detecting the concentration of carbon dioxide in the return air duct. The non-dispersive infrared sensing technology automatically updates the calibration of the transmitter using a proprietary logic feature which limits the amount of error due to drift. The Model CDD can measure up to 2000 PPM in duct air flows less than 1500 FPM. Product Applications : On demand room ventilation
Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Remote Reading Thermometer

Brand

DWYER USA

Remote Reading Thermometer

The Series RRT3 Remote Reading Thermometer with Switch combines an easy to read 3-14″ dual scale dial thermometer and a SPDT relay. Color coordinated pointers display the current process temperature and set point. In order to change the set point, a front adjustment knob controls the red set point pointer. The design of the internal mechanical switch movement prevents the set point pointer from sticking to the process indicating pointer. A 10.5 ft (3.2 m) stainless steel flex hose capillary prevents kinking and leaking of the measuring fluid when bending the capillary. For quick installation, electrical connections can be made to male quick connects or to the finger-safe screw terminals. Thermometer includes a u-clamp mounting bracket for panel mounting.

dual scale 3-1/4″

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Digital Pressure Transmitter
Model Number/Name	Series DPT
Brand	DWYER USA
digital pressure transmitter The Series DPT Digital Pressure Transmitter with Switches combines a large, 14-segment LED display with two programmable solid state switches into one compact unit. A unique, 3-way rotating design allows the DPT to meet specific installation requirements without any retrofitting. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. Large, ergonomically designed push buttons allow for quickeasy programming and thin-film piezoresistive sensor technology guarantees long-term reliability and stability. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Digital Process Meter
Model Number/Name	Series DPMA
Brand	DWYER USA
Application	Industrial, Laboratory
Digital Process Meter Series DPMA Adjustable LCD Digital Panel Meter offers a 3-12 digit display for easy viewing in a standard 18 DIN package. Unit accepts 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC inputs with a wide bipolar span and zero adjustment. Standard features include field selectable engineering units and decimal point positions. Choose from red, amber, or green segments for easy viewing at a distance. A 24 VDC power supply is required for the operation of the backlight. Unit accepts : 4 to 20 mA, 0 to 5 VDC, or 0 to 10 VDC Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

+91-9868958924, 9650264867

E-mail us

India

Cooling Coil

Heating Ventilation Air Conditioning Coil

Thermal Oil Coil

Evaporator Coil

Dx Cooling Coil

Chilled Water Coil

Industrial Cooling Coils

HVAC Coil

Anti Corrosive Cooling Coils

Expansion Coils

Double Circuit Cooling Coils

Air Conditioner Coils

A.H.U Cooling Coils

Aluminum Finned Copper Coil

Condenser Coil

Low Temperature Coils

Booster Coil

Automobiles Air Conditioner Coil

Direct Expansion Coils

Heat Exchanger Coils

Air Handling Unit Coils

Gas To Air Coil

Bend Coils

AC Condenser

Refrigeration Coils

Heating Coils

Ammonia Cooling Coils

Hot Water Coil

Cooling Coils

Copper Coil

Industrial Steam Coils

Copper Fin Tube Coils

Heat Transfer Coil

Steam Coil

Condensers Chillers

Chillers Condenser

Blue Fin Coil

Heat Exchanger

Honeycomb P.V.C. Fills

Black Honeycomb PVC Fills

Cooling Tower PVC Fill

Blue Honeycomb PVC Fills

PVC Evaporate Cooling Pad

Double Edge Fold Fills

Cooling Tower FRP Fills

PVC Fills Ball Type

PVC Fills Media

HIP Fill

ABS Fills

Virgin PVC Fills

Recycled PVC Fills

PVC Fills Standard

Honey Comb Panels Cooling Tower PVC Fills

Cooling Tower Fills

Heat Exchange PVC Fill

PVC Fills Media

Heat Exchange PVC Fills

Drift Eliminator PVC Fills

Polyvinyl Chloride Fills

Cooling Tower Fan Hub

Pipe Bond Blue PVC Fills

Cooling Tower Fills Double Fold Filter

Cooling Tower Pad

Blue Cooling Tower Pad

White Honeycomb PVC Fills

PVC Fills

Lps Ball Type Fills

Drift Eliminator

Trickling Filter Media

Mist Eliminator

PVC Fillers

Sigma Type PVC Fill

PP LPS Glass Type Fills

Cooling Tower Motor

Sigma Cooling Tower Fills

Cooling Tower Sprinkler With Distribution Pipe

Cooling Tower Fan