Author: admin

Elementor #1907


Low Cost Galaxy Differential Pressure Gauge

 

Rs 1,976 / Piece

Brand

Sensocon USA

.


Low Cost Galaxy Differential Pressure Gauge

 

We are leading supplier and trader of Low Cost Galaxy Differential Pressure Gauge. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge.

Product Details::

Pressure Range Model Number Pressure Range

Pa / kPa
0 – 0.25” S2000-60PA 0 – 60
0 – 0.5” S2000-125PA 0 – 125
0 – 1” S2000-250PA 0 – 250
0 – 2” S2000-500PA 0 – 500
0 – 3” S2000-750PA 0 – 750
0 – 4” S2000-1KPA 0 – 1
0 – 5” S2000-1.5KPA 0 – 1.5
0 – 6” S2000-2KPA 0 – 2
0 – 8” Zero Center
0 – 10” S2300-60PA 30 – 0 – 30
0 – 15” S2300-120PA 60 – 0 – 60
0 – 20” S2300-250PA 125 – 0 – 125
0 – 25” mm w.c.
0 – 30” S2000-6MM 0 – 6
0 – 50” S2000-10MM 0 – 10
0 – 100” S2000-25MM 0 – 25

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


Galaxy Make Magnehelic Differential Pressure Gauges

Rs 3,500 / Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

.


Galaxy Make Magnehelic Differential Pressure Gauges

 

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


Low Cost Galaxy Differential Pressure Gauges

Rs 3,500 / Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

.


Low Cost Galaxy Differential Pressure Gauges

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


Galaxy Make Magnehelic Gauge

 
Brand

Galaxy Make

.


Galaxy Make Magnehelic Gauge

Our specialization lies in offering a commendable range of Galaxy Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.

 

Features:

    • Compact size
    • Easy installation
    • Accuracy

 

Specifications :

      • Application: Industrial
      • Structure: Spring Pressure Gauge
      • Connection Type: Radial Direction
      • Function: Local Indication Type
      • Indicating Pressure Reference: Differential Pressure Gauge
    •  

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


Galaxy Make Magnetic Gauge

 

Rs 3,500 / Piece

Brand

Integerated Engineers India

.


Galaxy Make Magnetic Gauge

 

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


Galaxy Magnehelic Gauge

Rs 3,500 / Piece
Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

.


Galaxy Magnehelic Gauge

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Galaxy Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

    • Long service life
    • High functionality
    • Accuracy

Specifications :

      • We provide Galaxy magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge
      • Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%
      • Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others
      • We offer Galaxy magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas
      • In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover

  • Technical Specifications:

        • Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
        • Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option
        • HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)
        • Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
        • Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)
        • Size: 4 (101.6 mm) Diameter dial face
        • Mounting Orientation: Diaphragm in vertical position, Consult factory for
        • Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back
        • Weight: 1 lb 2 oz (510 g), MP HP 2 lb 2 oz (963 g)
        • Other position orientations

          Applications

          • Filter Status
          • Duct Static Pressure
          • Clean Room Pressure
          • Building Pressure
          • Fan and Blower Pressure
          • Paint Booths
          • Dust Collectors
          • Glove Box Pressure
          • Bubbler Systems
          • Cabinet Purging

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 

Elementor #1847


Capsuhelic Differential Pressure Gauge

Rs 5,401/ Piece

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

.


Capsuhelic Differential Pressure Gauge

Series 4000 Capsuhelic® Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic® Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Product Applications:

    • Fluid flow
    • Liquid storage tanks
    • Filter pressure drops
    • Vacuum or differential pressure

Specifications Service:

      • Aluminum Case: Air and compatible gases and oil based liquids.
      • Brass Case: Air and compatible gases and water based liquids.
      • Wetted Materials:Consult factory.
      • Housing: Die cast aluminum with impregnated hard coating, standard. Optional forged brass housing is required for water or water based fluids.
      • Special material diaphragms available, contact factory.
      • Accuracy: ±3% of FS at 70°F (21.1°C). (±2% on 4000S models, ±4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500).
      • Pressure Limits:-20″ Hg to 500 psig. (-0.677 bar to 34.4 bar).
      • Temperature Limits:20 to 200°F (-6.67 to 93.3°C)
      • Size:4″ (101.6 mm)
      • diameter dial face.
      • Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations.
      • Process Connections:1/4″ female NPT high and low pressure taps, duplicated – one pair top for air and gas, and one pair bottom for liquids.
      • Weight: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case.
      • Standard Accessories:Two 1/4″ NPT plugs for duplicate pressure taps, four flush mounting adapters with screws and four surface mounting screws.

Feature::

      • Gage capsule permits high-pressure usage with small differentials
      • Zero and range adjustments outside of gauge means no disassembly in normal service
      • Time-proven, simple, frictionless movement that permits full scale readings as low as 0.5 in w.c.
      • Diaphragm-actuated versus liquid filled gauge supports outdoor use
      • Options ASF Adjustable Signal Flag
      • B Brass Case
      • Scale Overlays Red, Green, Mirrored or Combination, Specify Locations

Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
 


1700 Low Differential Pressure Designed Switch

Rs 12,500 / Piece

Brand

DWYER USA

.

Model

1700

.


1700 Low Differential Pressure Designed Switch

Series 1700 Differential Pressure Switches were specifically designed to satisfy the demands of high volume original equipment manufacturers for a tough, dependable limit switch at a very low price. The Model 1710 uses Dwyer’s simple, time-proven method of mechanically coupling a sensitive 3″ diameter silicone rubber diaphragm to a versatile SPDT snap switch. The switch housing is precision molded of a high strength glass filled PPO which has excellent dimensional and thermal stability. This unique combination of existing and new technologies enables Dwyer to offer a limit switch priced less than comparable units without sacrificing performance. Installation is fast and simple with twist and tighten mounting screw slots, 14″ quick connect electrical terminals and dual size barbed pressure ports for 18″ and 316″ ID vinyl or rubber tubing.

For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz.

 

  • Product Applications High efficiency furnaces,Duct pressure monitor,Laboratory fume hoods,Monitor air filtercondition Etc

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
 


EDPS Differential Pressure Switch

Rs 4,000 / Piece

Brand

DWYER USA

.

Model

EDPS

.


EDPS Differential Pressure Switch

The Series ADPSEDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The ADPSEDPS is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. Series EDPS models meet UL508 and are constructed of plenum rated plastics. The compact size, adjustment knob and low cost make the ADPSEDPS the perfect choice for HVAC applications.

For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz.

 

  • Product Applications : Monitoring industrial cooling-air circuits,Monitoring air filters and ventilators,Monitoring flows in ventilation ducts,Frost protection for heat exchanges Etc.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
 


AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch

Rs 12,500/ Piece

Brand

DWYER USA

.

Model

AT1ADPS ATEX

.


AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch

The ATEX approved Series AT1ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 16 in w.c. (4000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing set point status on adjustment knob.

 

  • Important notes for installation : Cables must be fitted through 1/2″ NPT cable gland or ATEX conduit (not supplied with instrument) Etc.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
 


BDPA Adjustable Differential Pressure Alarm

Rs 12,500/ Piece

Brand

DWYER USA

.

Model

BDPA

.


BDPA Adjustable Differential Pressure Alarm

The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases.

 

The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDCVAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location.

 

The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive.

 

Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483).

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


1800 Low Differential Pressure Switch

Rs 25,000/ Piece

Brand

DWYER USA

.

Model

1800

.


1800 Low Differential Pressure Switch

Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.

 

CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.

Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483).

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


AT21823 ATEX Approved 1823 Differential Pressure Switch

Rs 12,500/ Piece

Brand

DWYER USA

.

Model

AT21823

.


AT21823 ATEX Approved 1823 Differential Pressure Switch

Essential for industrial environments, the ATEX approved Series AT21823 combines small size with 2% repeatability. Set point adjustment inside the switch allows for set point settings across 9 ranges from the low of .07 in w.c. to a maximum 85 in w.c. differential pressure. Series AT21823 flame-proof ATEX enclosures are available in aluminum and are ideal for low pressure hazardous area applications. Various housing options such as an overpressure relief valve or external setpoint adjustment knob are available. External setpoint knob allows adjustment without opening the enclosure

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


1900 Compact Low Differential Pressure Switches

Rs 12,500/ Piece

Brand

DWYER USA

.

Model

1900

.


1900 Compact Low Differential Pressure Switches

Our most popular series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.

CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.

Product Applications : Clogged filter detection,Air conditioning refrigeration coil icing detection; defrost cycle intiation,Variable air volume controller Etc.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


AT11910 ATEX Approved 1910 Differential Pressure Switch

Rs 25,000/ Piece

Brand

DWYER USA

.

Model

AT11910

.


AT11910 ATEX Approved 1910 Differential Pressure Switch

Our most popular Differential Pressure Switch is now available in an flame-proof ATEX approved package in the AT11910 Series. This pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. For air and non-combustible compatible gases, the AT11910 Series switches have set points from 0.07 to 20 in w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside the switch enclosure. Series AT11910 ATEX enclosures are available in aluminum enclosures and ideal for low pressure, hazardous area applications.

Important notes for installation

Cables must be fitted through 12″ NPT cable gland or ATEX conduit (not supplied with instrument).
Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve).
Open cover only after de-energizing instrument.
Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


MDA Miniature Adjustable Pressure Switch

Rs 25,000/ Piece

Brand

DWYER USA

.

Model

MDA

.


MDA Miniature Adjustable Pressure Switch

Sense differential pressure with the Series MDA Miniature Adjustable Pressure Switch. The switch features field adjustable set point and gold inlay contacts. Air or other compatible fluids can be used on the “high side”. The lightweight and compact size make the MDA ideal for any application with space constraints. Applications include industrial, HVAC, pump and motor control, medical, automotive, pools and spas.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Mark II Molded Plastic Manometer

Rs 12,500 / Piece

Brand

DWYER USA

.

Measuring Range

0-1”

.

Model

Mark II

.


Mark II Molded Plastic Manometer

Dwyer® Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


424 Durablock Inclined Manometer

Rs 9,500 / Piece

Brand

DWYER USA

.

Model

Dwyer No 424

.


424 Durablock Inclined Manometer

Dwyer® No. 424 inclined-vertical manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20″ to provide ample multiplication of indicating fluid movement in this critical lower part of the range.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


1235 Flex-Tube Well Manometer

Rs 8,500/ Piece

Brand

DWYER USA

.

Model

1235

.


1235 Flex-Tube Well Manometer

Dwyer Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Overpressure safety traps assure protection against loss of fluid. Heavy pure white acrylic plastic scales have sharp black silk screened figures and graduations sealed with clear mylar coating. Scales are adjusted with quick-acting positive mechanism. Heavy heat treated aluminum back plates have durable gray hammerloid finish. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5″ Hg (68″ w.c.).

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 616KD Differential Pressure Transmitter

Rs 12,500 / Piece

Brand

DWYER USA

.

Model

Series 616KD

.


Series 616KD Differential Pressure Transmitter

The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration.

 

Mounting is simple with integral mounting holes on the 616KD that are inherent to the molded housing. The 616KD has the expanded capability to be mounted on a 35 mm DIN rail either via its side or back integral DIN rail clips. The Series 616KD has easy-to-wire open screw terminals at the top of the housing. An optional protective cap snaps directly to housing to cover terminals.

 

The One-Touch® family of Differential Pressure Transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume and filter monitoring. Available models include ranges from 1 in w.c. to 20 in w.c. depending on series.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Model DTG Digital Tire Pressure Gage

Rs 25,000/ Piece

Brand

DWYER USA

.

Measuring Range

Model DTG-01

.

Model

Model DTG-01

.


Model DTG Digital Tire Pressure Gage

The Model DTG-01 Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. With ±1% FS accuracy, the DTG reads psi, bar and kPa with the ease of one-button operation. A protective rubber casing stands up against rough handling and short drops.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 628CR Pressure Transmitter

Rs 12,500 / Piece

Brand

DWYER USA

.

Model

Series 628CR

.


Series 628CR Pressure Transmitter

Accurate to ±1% of full scale, The Series 628CR Pressure Transmitter, contains a low cost ceramic sensor housed in a compact, rugged, NEMA 4X stainless steel body. Ideal for the budget conscious OEM’s that require high levels of performance, reliability and stability at an unbeatable price. The 628CR housing is small and lightweight for optimum compatibility with OEM systems. The design allows for a variety of pressure ranges from 30 to 500 psi and optional electrical connections allowing you to select the right transmitter for your application.

 

  • Product Applications : Pump Monitoring,Compressors,Irrigation Equipment,HVAC,Pneumatic Systems

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 626 & 628 Industrial Pressure Transmitter

Rs  9,500/ Piece

Brand

DWYER USA

.

Model

Series 626 & 628

.


Series 626 & 628 Industrial Pressure Transmitter

The Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing.

The Dwyer Series 628 Pressure Transmitters are ideal for OEM’s with 1% full scale accuracy sensors. The transmitter is also available in the general purpose stainless steel housing and the cast aluminum conduit housing.

The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

 

  • Product Applications : CompressorsPumping Systems,Irrigation System Pressure Etc.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 673 Pressure Transmitter

Rs 12,500 / Piece

Brand

DWYER USA

.

Model

Series 673

.


Series 673 Pressure Transmitter

The low cost Series 673 Pressure Transmitter is a fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC equipment, industrial engines and compressor control.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Magnehelic Gauge SS Plate Front Cover

Rs 350 / Piece

Brand

Integerated Engineers India

.

Material

Steel

.

Connection

New

.


Magnehelic Gauge SS Plate Front Cover

We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients.

 

Specifications:

  • Metal of construction S.S. 304
  • Dial size: 4″
  • Ranges: mm/wc,In/wc, Pascal
  • Enclosure type: consul type & wall mounting
  • Front panel: zero calibration gas selector switch optional

 

Available in different specifications ranging from:

  • 0-10,
  • 0-25,
  • 0-40,
  • 0-50,
  • 0-100 MM Wc , And
  • 0- 60 pA,
  • 0-250 pA.

 

Uses:

  • Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series TPT Industrial Pressure Transmitter

 
Brand

DWYER USA

.

Model

Series TPT

.


Series TPT Industrial Pressure Transmitter

The Series TPT Pressure Transmitter is the ideal choice for all types of industrial pressure applications. Machined from a solid piece of 17-4PH SS, the TPT provides a leak proof, all metal system without O-rings, welds, or organics exposed to the pressure media. Its design allows for stable operation when subject to shock and vibration. Utilizing piezoresistive technology with digital compensation and temperature correction, the TPT gives high accuracy and stability under harsh environmental conditions. Available in ratiometric and 4 to 20 mA outputs.

 

  • Product Applications : Process automation and control, Test and measurement equipment Etc.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 682 Industrial Pressure Transmitter

 
Brand

DWYER USA

.

Model

Series 682

.


Series 682 Industrial Pressure Transmitter

The Series 682 Industrial Pressure Transmitter is designed to withstand environmental effects such as shock, vibration, temperature, and EMIRFI. The electronics and capacitive sensor are packaged in a welded stainless steel housing and meets NEMA 4 (IP65) protection ratings. The transmitter features external zero and span adjustments and reverse polarity protection. The Series 682 delivers high performance in tough applications such as off road equipment, hydraulic systems, compressor control, industrial engines, or industrial refrigeration.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 672 Low Pressure Transducer

 
Application

Panel Meter, PLC, Switches, Pumps

.


Series 672 Low Pressure Transducer

The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10″ w.c. up to 400″ w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 634ES Adjustable Range Pressure Transmitter

 
Brand

DWYER USA

.

Model

Series 634ES

.


Series 634ES Adjustable Range Pressure Transmitter

Series 634ES Transmitters sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal. Positive pressure can be measured within an accuracy of ±0.5% of span. The Series 634ES uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge. Convenient 2-wire operation simplifies installation. Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish. Enclosure is designed to meet NEMA 4X requirements.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series 681 Sanitary Pressure Transmitter

 
Brand

DWYER USA

.

Model

Series 681

.


Series 681 Sanitary Pressure Transmitter

The Series 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series BYDS Bypass Damper Switch

 
Brand

DWYER USA

.

Model

BYDS

.


Series BYDS Bypass Damper Switch

The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical onoff pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application.

CONTROL OPERATION

The BYDS Bypass Damper Switch is designed for use with a three wire floating point damper actuator used to control the static pressure on zone control systems requiring motorized bypass dampers. A bypass damper, bypasses air from the discharge air side of the HVAC unit back in the return air side. The air flow is modulated in order to maintain a constant static pressure in the system as individual zone dampers open and close. The static pressure control is equipped with solid-state switching which dramatically increases the life of the control. On an increase in static pressure the BYDS will send 24 volts out and start the actuator to drive open. When the static pressure reaches set-point the actuator will stop. After a ten second delay the actuator will start to drive the damper closed if there has not been an increase in static pressure. A green LED indicates when the damper is in the open position or being driven open. A 24 VAC transformer is required to power the BYDS control and damper actuator. The unit includes tubing and two static pressure probes

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


TRI2 Tridicator Gage

Rs 25,000/ Piece

Brand

DWYER USA

.

Model

Series TRI2

.


TRI2 Tridicator Gage

The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


SGP Stainless Steel Low Pressure Schaeffer Gage

Rs 10,780/ Piece

Brand

DWYER USA

.

Model

Series SGP

.


SGP Stainless Steel Low Pressure Schaeffer Gage

The Series SGP Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGP gages are designed with 304 SS housings, a 316L SS chamber and a 316 SS diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available.

 

Applications : Chemical,Fertilizer,PowerPharmaceutical,Petrochemical

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


SGO Stainless Steel Schaeffer Gage

Rs 12,500/ Piece

Brand

DWYER USA

.

Model

Series SGO

.


SGO Stainless Steel Schaeffer Gage

The Series SGO Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGO gages are designed with 304 SS housing, a 316L SS chamber and PTFE coated diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges are available from full vacuum, compound to 300 psi.

Product Applications: : Chemical,Refinery,Fertilizer Petrochemical, Power Pharmaceutical Pulp and PaperCement.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


SGF Stainless Steel Low Pressure Gage

Rs 4,000 / Piece

Brand

DWYER USA

.

Model

Series SGX SGF

.


SGF Stainless Steel Low Pressure Gage

The Series SGXSGF Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGXSGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 212°F (100°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle.

  • Product Applications : Pneumatic,Draft Measurement,Filter Monitoring,Liquid Level

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 

Series WDG Weatherproof Digital Pressure Gage

Rs 25,000 / Piece

Brand

DWYER USA

.

Measuring Range(mm)

4-digit backlit display

.

Model No.

Series WDG

.


Series WDG Weatherproof Digital Pressure Gage

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 

Series DPGA & DPGW Digital Pressure Gauge

Rs 12,500/ Piece

Brand

DWYER USA

.

Measuring Range(mm)

0-50 MM WC

.

Model No.

Series DPGA

.


Series DPGA & DPGW Digital Pressure Gauge

The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

 

The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases.

 

Product Applications : Ideal for checking process pressure at system startup

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 

Series DPGAB Digital Pressure Gauge

Rs  28,562/ Piece

Brand

DWYER USA

.

Measuring Range(mm)

Range 0 to 200 psig

.

Model No.

Series DPGWBDPGAB

.


Series DPGAB Digital Pressure Gauge

The Series DPGWB DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The DPGWB stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGWBDPGAB come with a protective rubber boot to protect against short drops and rough handling.

 

Product Applications : Ideal for checking line pressures at system startup

 

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series DPG Digital Pressure Gage

Rs 25,000 / Piece

Brand

DWYER USA

.

Model

Series DPG

.


Series DPG Digital Pressure Gage

Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages.

 

Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units.

 

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series DCGII Digital Calibration Pressure Gage

Rs 25,000 / Piece

DWYER USA

Series DCGII

.


Series DCGII Digital Calibration Pressure Gage

The Series DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability.

 

Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Model HTG Handheld Digital Tire Pressure Gage

Rs 35,000 / Piece

Brand

DWYER USA

.

Model

Model HTG-01

.


Model HTG Handheld Digital Tire Pressure Gage

The Model HTG-01 Handheld Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. Its lightweight, handheld design makes it portable and user friendly with its one button operation. A backlit 14″ LCD display and illuminated tip ensures easy visibility in low light. The Series HTG also displays three different units of psi, bar and kPa with the push of a button.

 

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series DSGT Digital Indicating Transmitter

Rs 35,000 / Piece

Brand

DWYER USA

.

Model

Series DSGT

.


Series DSGT Digital Indicating Transmitter

Series DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches.

The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update dampening rates.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 

250-AF Inclined Manometer Air Filter Gage

 
Brand

DWYER USA

.

Connection

New

.

Condition

New

.


250-AF Inclined Manometer Air Filter Gage

Dwyer® Durablock® Series 250-AF Gages are precision machined 1″ thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002″ to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by “O” rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions.

Economy Models 451-AF and 452-AF are similar to 250 Series except they are not equipped with over pressure traps. Two A-324 14″ compression fittings are included with each Gage. Bodies are of 58″ thick acrylic and scales are mirror polished, epoxy coated aluminum.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


300 Durablock Solid Plastic Stationary Gage

Rs 9,000/ Piece

Brand

dwyer usa

.


300 Durablock Solid Plastic Stationary Gage

Dwyer® solid plastic stationary gages – or draft gages – are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrications of acrylic instruments.

Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series UGI Utility Gage

Rs 25,000 / Piece

Brand

DWYER USA

.

Model

DWYER USA

.


Series UGI Utility Gage

1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales

The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators.

 

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series UGJ Utility Gage

Rs 25,000 / Piece

Brand

DWYER USA

.

Model

DWYER USA

.


Series UGJ Utility Gage

 

The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 


Series SG5 Contractor Gage

Rs 4,000 / Piece
Brand

DWYER USA

.
Model

Series SG5

.


Series SG5 Contractor Gage

The Series SG5 Contractor Gages are ideally manufactured for contractors because of their large dial and compact design. Since the gages are lightweight and slim, they are easy to transport. The large 4.5″ scale makes them simple to read. The Series SG5 gages possess psi scales with 1% full-scale accuracy. The gages are made with a stainless steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). These qualities make the SG5 series perfect for contractors and industrial applications. A wide offering of ranges are available from full vacuum to 300 psi.

 

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Delhi
 

Elementor #1829


Dwyer Digital Differential Pressure Gauge

Rs 18,500 / Piece

Brand

DWYER USA

.


Dwyer Digital Differential Pressure Gauge

Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

 Specifications:

  •   Measuring Range: Medium-pressure Gauge
  •   Accuracy: 0.5
  •   Application: Industrial

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
 

Elementor #1717

Model 480 Vaneometer Swing Vane Anemometer

Rs 7,500 / Piece

Model 480 Vaneometer Swing Vane Anemometer The 480 Vaneometer™ Swing Vane Anemometer is a durable low-priced instrument specifically designed to simplify the measurement of low air velocities from 25 to 400 feet per minute. OSHA, EPA and other safety ventilation requirements for spray booths and at fume, smoke and dust exhaust hoods can now be quickly checked, even by untrained personnel. Its small size and light weight – only four ounces make it ideal to carry from one work station to another. A versatile steel mounting bracket for continuous monitoring is also included. The Vaneometer™ Swing Vane Anemometer is accurate to ±5% of full scale to 100 FPM and ±10% from 100 FPM to top of scale. It has a spirit level to ensure accurate readings and the large scales are easy to read and visible from both sides. The housing is molded from tough ABS plastic and easy to clean with soap and water. The polyester vane can be cleaned with lacquer thinner. A spare vane is provided. Use a Vaneometer™ Swing Vane Anemometer to measure velocity of air flow into laboratory fume hoods and at paint spray booths to determine when to change filters. Or wherever needed to meet OSHA standards of ventilation for smoke, dust or fume removal. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: delhi Production Capacity: 8368801023

Series 477 Handheld Digital Manometer
Measuring Range 0 to 20 inch WC
Connection 3/16 inch ID Tubing
Brand Dwyer
Power Supply 9 V battery
Series 477 Handheld Digital Manometer Series 477 Handheld Digital Manometers are packed with features you need to make low pressure measurement and recording faster, easier and more accurate than ever. First, you can instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. Next, a non-volatile memory function enables storage of up to 40 readings – perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct. The Series 477 is FM approved intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. When working in poorly lighted areas, just switch on the handy backlight feature. It automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. We even included an audible alarm to warn you of overpressure plus a visual alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.
  • Product Applications : Field calibration.,Clean room checks,Air velocity monitoring with Dwyer Pitot tube. etc.
SPECIFICATIONS Service: Air and non-combustible compatible gases. Accuracy: ±0.10% of full-scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scalefrom 32 to 60 and 78 to 104°F (0-15.6 and 25.6-40°C). Pressure Hysteresis: ±0.1% of full-scale. Pressure Limits: See chart. Temperature Limits: 32 to 140°F (0 to 60°C). Storage Temperature Limits: -4 to 176°F (-20 to 80°C). Display: 0.42?? (10.6 mm) 4 digit LCD. Resolution: See chart. Power Requirements: 9 V alkaline battery, installed non-functional, userreplaceable. Weight: 10.2 oz. (289 g). Process Connections: Two barbed connections for use with 1/8?? (3.18 mm) or3/16?? (4.76 mm) ID tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only.Two compression fittings for use with 1/8?? (3.18 mm) ID x 1/4?? (6.35 mm) ODtubing for 477A-6 and 477A-7 only.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
475 Mark III Handheld Digital Manometer
Brand DWYER USA
Model 475 Mark III
475 Mark III Handheld Digital Manometer The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1″ w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1″ w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42″ LCD display is easy to read, minimizing data collection errors. Units include a “low battery” indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 18″ or 316″ I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
HM35 Precision Digital Pressure Manometer

Brand DWYER USA
Model HM35
Application Industrial, Laboratory
HM35 Precision Digital Pressure Manometer The High Precision Series HM35 Digital Manometer is designed to reliably measure and log pressure measurements for critical applications. This family of manometer can measure absolute pressure, differential pressure or gauge pressure with up to 0.05% accuracy. The data logging function can store up to 10,742 readings and transmit the readings to a PC through an IR serial port. The large display can graphically display trends in the data as well as peaks and valleys. The series HM35 comes standard with a calibration certificate so that the instrument can be used as a secondary calibration standard when testing other pressure instrumentation. This manometer is ideal for laboratories, calibration facilities, and other critical pressure applications.

Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
HM28 Handheld Digital Manometer

Brand DWYER USA
Model HM28
Application Industrial, Laboratory
HM28 Handheld Digital Manometer The Series HM28 Digital Hand-Held Manometer is a precision instrument designed to measure a wide range of pressures to a very high accuracy. The unit incorporates a variety of features in an easy to use format that makes it useful in a wide variety of applications. Features include: measurement in all common pressure ranges, display resolution to 0.001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. We are so proud of the accuracy of the HM28 that we provide a certificate of calibration with the unit at no additional cost. Depending on your application, the HM28 can be used as a secondary calibration standard for your other pressure instrumentation.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
490 Wet Handheld Digital Manometer

Brand DWYER USA
Model 490
Application Industrial, Laboratory
490 Wet Handheld Digital Manometer Series 490 Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings for later recall and a backlight provides auxiliary lighting for hard-to-see locations. Standard are a hold feature and both visual and audible overpressure alarms. A new feature added to the Series 490 is a field adjustable damping. This allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications. A 9V alkaline battery is included that provides up to 100 hours of operation.  
  • Product Applications : Balance hydronic heating or cooling water loops,Check pump or chiller performance,Determine pressure head loss from valves and pipe reduction.
Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
1223 Flex-Tube U-Tube Manometer

Brand DWYER USA
Model 1223
1223 Flex-Tube U-Tube Manometer These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility. You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 

1212 Gas Pressure Kit Slack Tube Manometer
Brand DWYER USA
Model 1212
1212 Gas Pressure Kit Slack Tube Manometer 1211 Handy Roll-Up Manometer with Laboratory Accuracy Dwyer® Slack Tube® Manometers are as accurate as the finest laboratory “U” gages – yet they are made to roll up compactly for easy carrying and to withstand rough usage. Simply unroll the Dwyer® Slack Tube® Manometer and set up to read static pressure, vacuum, or differential pressure. Magnetic clips hold it firmly to any steel surface or hang it on a nail. Turn connectors one revolution to open. When the pressure is imposed, add the number of inches one column travels up to the number of inches the other column travels down. When reading is completed turn connectors to seal columns, roll up manometer into compact coil and tuck it away in its plastic case or a tool box. No fluid lost. No loose caps or inserts to lose. Dwyer® Slack Tube® Manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches. Use them in determining velocity and static pressures, for leakage, fan and blower tests, calibrating control devices, checking gas pressure and many other applications. All models have flexible vinyl-plastic columns and flexible spring steel scale calibrated in inches of water using water; and inches of mercury using mercury. Scale is center-mounted between columns to eliminate parallax error and has a full 2″ sliding zero adjustment. All Dwyer® Slack Tube® Manometers feature exclusive molded nylon tubing connector assemblies with rapid shutoff design in an acrylic plastic top. One turn counter clockwise and the instrument is ready for use. Another turn seals the tubes completely. Molded all-nylon construction makes this assembly corrosion-proof, leak-proof and practically unbreakable. Tubing connectors extend horizontally allowing 360° freedom. Tubes won’t bend or pinch off. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
 

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

 

BrandDWYER USA

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

1227 as a regular U-tube manometer to read high-range pressure on the right leg, or as an inclined manometer to read low-range pressure on the bottom leg. Simply incline manometer until fluid levels read zero. No spirit level required. Magnetic clips hold the gage in position on a steel duct surface.

Most versatile and useful low cost manometer we know of. Designed for installation and servicemen. A sturdy, clear plastic manometer, it offers single, direct readings in two ranges: As a U-tube, it reads from 0 to 16″ of water; as an inclined gage, it reads from -.20 to 0 to 2.6″ of water. Model 1227M (Metric) is 0 to 400 mm water column as a U-tube and -5 to 0 to 70 mm water column as an inclined gage. “How-to-use” instructions are printed directly on the scale.
Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 

Series 1213 Gas Pressure Manometer

Brand DWYER USA
Model Series 1213
Series 1213 Gas Pressure Manometer
Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 18″ nylon male NPT to barb fitting. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
Model THI-10 Digital Thermohygrometer

Brand DWYER USA
Model THI-10 Digital Thermohygrometer The Model THI-10 Digital Thermohygrometer accurately measures relative humidity and ambient temperature. Up to 99 readings can be stored in non-volatile memory allowing the HVAC technician to record the data after returning to the office. This compact thermohygrometer also features user selectable engineering units, MaximumMinimum functions, dew point and wet bulb temperature measurements. The Model THI-10 includes a soft carrying case with a belt loop for easy transportation. Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023

 
Model ANE-1 Differential Pressure Anemometer

Brand DWYER USA
Model Model MW-1
Usage Industrial, Laboratory
Model MW-1 Pocket Wind Meter Measure wind speed and temperature with the Model MW-1 Pocket Wind Meter. Easily view readings on the four digit 2″ (51 mm) high LCD display with wind speed bar graph. Selectable air velocity ranges include ms, ftmin, kmh, mph, and knots. Ambient temperature recorded in °F or °C. The MW also features automatic shut-off, detailed instruction manual and protective plastic water resistant housing that floats. Accessories include a lanyard.Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: DELHI
  • Production Capacity: 8368801023