admin

Huba Switzerland Pressure Transmitter Wholesaler

Huba 511.915003841 Pressure Transmitter 0 – 4 bar

Minimum Order Quantity	1 Number
Model Number	511.915003841
Brand	Switzerland
Frequency Range	0 – 4 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Output Voltage	4-20mA
Product Weight	200 g
Rated Supply Voltage	8-33 VDC

Huba 511.915003841 Pressure Transmitter 0 – 4 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request

Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Huba 511.917003571 Pressure Transmitter 0 – 6 bar

Minimum Order Quantity	1 Number
Model Number	511.917003571
Brand	Switzerland
Frequency Range	0 – 6 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	8-33 VDC
Output Type	4-20 mA

Huba 511.917003571 Pressure Transmitter 0 – 6 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request

Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector

Huba 511.930003842 Pressure Transmitter 0 – 10 bar

Minimum Order Quantity	1 Number
Model Number	511.930003842
Brand	Switzerland
Frequency Range	0 – 10 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	8-33 VDC
Output Type	4-20 mA

Huba 511.930003842 Pressure Transmitter 0 – 10 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request

Medium Liquids And Gases

Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Huba 511.930007041 Pressure Transmitter 0 – 10 Bar

Minimum Order Quantity	1 Number
Model Number	511.930007041
Brand	Switzerland
Frequency Range	0 – 10 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	16-34 VDC
Output Type	0-10 V

Huba 511.930007041 Pressure Transmitter 0 – 10 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request

Medium Liquids And Gases

Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Huba 511.932003842 Pressure Transmitter 0 – 25 bar

Minimum Order Quantity	1 Number
Model Number	511.932003842
Brand	Switzerland
Frequency Range	0 – 25 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	8-33 VDC
Output Type	4-20 mA

Huba 511.932003842 Pressure Transmitter 0 – 25 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On RequestMedium Liquids And Gases:

Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Huba 511.940003842 Pressure Transmitter 0 – 60 Bar

Minimum Order Quantity	1 Number
Model Number	511.940003842
Brand	Switzerland
Frequency Range	0 – 60 Bar
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	8-33 VDC
Output Type	4-20 mA

Huba 511.940003842 Pressure Transmitter 0 – 60 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request:

Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Huba 511.941003842 Pressure Transmitter 0 – 100 bar

Minimum Order Quantity	1 Number
Model Number	511.941003842
Brand	Switzerland
Frequency Range	0 – 100 Bar
Accuracy	< 0.5% fs
Usage/Application	Industrial Process Monitoring, Irrigation System Pressure
Product Weight	200 g
Rated Supply Voltage	8-33 VDC
Output Type	4-20 mA

Huba 511.941003842 Pressure Transmitter 0 – 100 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.

Fixed Order Quantities On Request

Medium Liquids And Gases
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.

Series 1900 Compact Low Differential Pressure Switches Wholesaler

1900 Dwyer Series Compact Low Differential Pressure Switches

Minimum Order Quantity	1 Number
Model Number	1900
Frequency Range	0.07 to 20″ w.c.
Weight	1lb. 4.5 oz. (581 g)
Brand	Dwyer USA
Electrical Rating	15 A @ 120-480 VAC (~), 60 Hz
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Agency Approvals	CE,UL,CSA,FM
Pollution Degree	2
Process Connections	1/8″ female NPT
Repeatability	+-3%

1900 Dwyer Series Compact Low Differential Pressure Switches For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure and prevents tampering. UL, CE and CSA listed, and FM approved. Dwyer 1900 Series Offers

Features:

Oversized check valves for smooth controlled operation
Mash proof vent valve (no needle valve)
Patented non-oil based lubricants used on all moving parts
Dual O-rings on all pistons to ensure zero leakage

Applications:

Air conditioning refrigeration coil icing detection; defrost cycle initiation
Clogged filter detection
Variable air volume controller

1900-00 Dwyer Series Compact Low Differential Pressure Switch Range 0.07-0.15

Minimum Order Quantity	1 Number
Model Number	1900-00
Brand	Dwyer USA
Frequency Range	0.07-0.15″ W.C
Usage/Application	Variable Air Volume Controller,Clogged Filter Detection
Product Weight	1lb. 4.5 oz. (581 g)
Electrical Rating	15 A @ 120-480 VAC (~),60 Hz
Agency Approvals	CE,UL,CSA,FM
Pollution Degree	2
Process Connections	1/8″ female NPT
Repeatability	+-3%

1900-00 Dwyer Series Compact Low Differential Pressure Switch Range 0.07-0.15″ Most Popular SERIES 1900 Combines Advanced Design and Precision Construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.

Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.

1900-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55

Minimum Order Quantity	1 Number
Model Number	1900-0
Brand	Dwyer USA
Frequency Range	0.15-0.55″ W.C
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Power/Voltage	120-277 VAC
Pollution Degree	2
Weight	1lb. 4.5 oz. (581 g)
Agency Approvals	CE,UL,CSA,FM
Process Connections	1/8″ female NPT
Repeatability	+-3%
Altitude Limit	6560 ft (2000 m) max
Humidity Limit	80% RH (non-condensing)

1900-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55 The Dwyer 1910-0 Compact Low Differential Pressure Switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, 19100 switches have set points from 0.15 – 0.55″ w.c.. Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.

Flame-proof ATEX enclosure protects the device in hazardous areas
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications
Range screw protected inside switch enclosure prevents tampering
No power to operate DPDT switch means no additional wiring or conduit reduces material and installation labor costs
Easy access for modifying set point simplifies adjustment
Both control contacts activate at the same time eliminating system issues where lead switch activities preventing the lagging switch from sending a signal

1900-1 Dwyer Series Compact Low Differential Pressure Switch Range 0.40-1.6″ W.C

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
IP Rating	0.40-1.6″ W.C
Model Number	1900-1
Power/Voltage	120-277 VAC
Weight	1lb. 4.5 oz. (581 g)
Repeatability	+-3%

1900-1 Dwyer Series Compact Low Differential Pressure Switch Range 0.40-1.6″ W.C Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.

Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.

1900-5 Dwyer Series Compact Low Differential Pressure Switch Range 1.40-5.5

Minimum Order Quantity	1 Number
Model Number	1900-5
Brand	Dwyer USA
Frequency Range	1.40-5.5″ W.C
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Power/Voltage	120-277 VAC
Product Weight	1lb. 4.5 oz. (581 g)
Repeatability	+-3%
Process Connections	1/8″ female NPT
Pollution Degree	2

1900-5 Dwyer Series Compact Low Differential Pressure Switch Range 1.40-5.5″ Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.

Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.

1900-10 Dwyer Series Compact Low Differential Pressure Switch Range 3.0-11.75

Minimum Order Quantity	1 Number
Model Number	1900-10
Brand	Dwyer USA
Frequency Range	3.0-11.75″ W.C
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Product Weight	1lb. 4.5 oz. (581 g)
Agency Approvals	CE,UL,CSA,FM
Pollution Degree	2
Process Connections	1/8″ female NPT

1900-10 Dwyer Series Compact Low Differential Pressure Switch Range 3.0-11.75 Most popular Series 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.

Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.

1920-10 Dwyer Series Compact Low Differential Pressure Switch Range 4.0-20.0

Minimum Order Quantity	1 Number
Model Number	1920-10
Brand	Dwyer USA
Frequency Range	4.0-20.0″ W.C
Power	120-277 VAC
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Product Weight	1lb. 4.5 oz. (581 g)
Process Connections	1/8″ female NPT
Repeatability	+-3%
Agency Approvals	CE,UL,CSA,FM

1920-10 Dwyer Series Compact Low Differential Pressure Switch Range 4.0-20.0 Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.

Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.

1910-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55

Minimum Order Quantity	1 Number
Model Number	1910-0
Brand	Dwyer USA
Frequency Range	0.15-0.55″ W.C
Power	120-277 VAC
Usage/Application	Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Weight	1lb. 4.5 oz. (581 g)
Agency Approvals	CE,UL,CSA,FM
Pollution Degree	2
Process Connections	1/8″ female NPT
Repeatability	+-3%

1910-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55 The Dwyer 1910-0 Compact Low Differential Pressure Switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, 19100 switches have set points from 0.15 – 0.55″ w.c.. Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.

Flame-proof ATEX enclosure protects the device in hazardous areas
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications
Range screw protected inside switch enclosure prevents tampering
No power to operate DPDT switch means no additional wiring or conduit reduces material and installation labor costs
Easy access for modifying set point simplifies adjustment
Both control contacts activate at the same time eliminating system issues where lead switch activities preventing the lagging switch from sending a signal

Static Pressure Tips & Accessories Dwyer Instruments

Dps Duct Kit

Country of Origin	Made in India
Color	GRAY
Part Number	DPS Differential Air Pressure KIt
Weight	56 G
Material	Plastic/PVC
Special Feature	Unbreakable

DPS Duct Kit

Dwyer Differential pressure Transmitter For Air (DPTA) Accessories.

Duct Kit, Including 2M Silicone Hose And 2 Joining Pipes DPSJ With Screws.

Static Pressure Tip

Minimum Order Quantity	100 Unit
Moulded Parts Type	Static Pressure Tip
Color	White
Material	Plastic
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Packaging Type	100 NOS
Type	Static Pressure Tip
Usage/Application	Differential Pressure Switch
Weight	56 G
Country of Origin	Made in India

Static Pressure Tip

These Sensors Are For Use With Manometers, Magnehelic® Gages, Differential Pressure Switches and Other Controllers to Pick Up Or Sense Static Pressure Drop Across Air Filters And Cooling Coils, Blower Input And Discharge Pressures, etc.

Grey Static Pressure Tip

Material	ABS
Country of Origin	Made in India
Application	Chemical,Laboratory,Industrial
Special Feature	Unbreakable
Usage/Application	Differential Pressure Switch
Weight	56 G

Grey Static Pressure Tip

Our Company Has Created a Niche in The Field Of Offering Static Pressure Tip.

Dwyer Plastic Static Pressure Tip

Moulded Parts Type	A-480
Color	White
Material	Plastic
Brand	DWYER
Packaging Type	100
Usage/Application	Minihelic II Differential Pressure Gages, Magnesense Differential Pressure Transmitters, DigiMag Dig
Weight	0.800 ounces
Country of Origin	Made in India

Dwyer Plastic Static Pressure Tip

For Use With Dwyer Minihelic II Differential Pressure Gages, Magnesense Differential Pressure Transmitters, DigiMag Digital Differential Pressure and Flow Gages, ADPS/EDPS Differential Pressure Switches, and an array of other Dwyer products.

Specifications For This Item

Brand Name	Dwyer
Item Weight	0.800 ounces
Number of Items	1
Part Number	A-480

Plastic Static Pressure Tip

Material	Plastic
Country of Origin	Made in India
Moulded Parts Type	Static Pressure Tip
Color	Gray
Weight	56 G
Usage/Application	Differential Pressure Switch

Plastic Static Pressure Tip

These Sensors Are For Use With Manometers, Magnehelic Gages, Differential Pressure Switches and Other Controllers to Pick Up Or Sense Static Pressure Drop Across Air Filters And Cooling Coils, Blower Input And Discharge Pressures, etc.

ABS Static Pressure Tip

Material	ABS
Usage/Application	Differential Pressure Switch
Country of Origin	Made in India
Application	Industrial
Item Weight	0.800 ounces
MACK	ENVIRO TECH

Abs Static Pressure Tip
These Sensors Are For Use With Manometers, Magnehelic Gages, Differential Pressure Switches and Other Controllers to Pick Up Or Sense Static Pressure Drop Across Air Filters And Cooling Coils, Blower Input And Discharge Pressures, etc.

A-480 DWYER Plastic Static Pressure Tip

Brand	Dwyer
Wetted Parts	Plastic
Color	White
Application	Industrial, Laboratory
Model	A – 480

DPS Differential Air Pressure Kit

Minimum Order Quantity	100 Piece
Color	GRAY
Packaging Type	100
Part Number	DPS Differential Air Pressure KIt
Quantity Per Pack	100
Warranty	YAS
Weight	56 G
Usage/Application	Differential Pressure Switch
I Deal In	New Only
Material	Plastic
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

DPS Differential Air Pressure KIt

Dwyer Differential pressure Transmitter For Air (DPTA) Accessories.

Duct Kit, Including 2M Silicone Hose And 2 Joining Pipes DPSJ With Screws.

Duct Fixing Kit

Minimum Order Quantity	100 Unit
Material	Plastic
Usage/Application	Differential Pressure Switch
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Design	Standard
Packaging Type	1
Color	GRAY
Country of Origin	Made in India

Duct Fixing Kit

Duct Fixing Kit ETIP 200 • ETIP 200 Includes 2 Plastic Tubes With Integrated Mounting Plate, 2 Metres PVC Hose And 4 Screws.

Duct Connection Set

Minimum Order Quantity	500 Unit
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Usage/Application	Differential Pressure Switch
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Plastic
Weight	56 G
Warranty	1 YERS
Product Type	Duct Connection Set
Place Of Origin	DELHI

Duct Connection Set

Duct Connection Set Comprising Two Plastic Pitot Tubes, Fixing Screws And 2 Metres of PVC Tubing, Suitable For 930.. & PTH-3202

Weight – 56 g

Series 1620 Single and Dual Pressure Switch Wholesaler

Dwyer 1620 Series Single and Dual Pressure Switches

Minimum Order Quantity	1 Number
Media Type	Gas, Air
Pressure Range	.15-1.5″ w.c
Model Number	1620
Brand	Dwyer USA
Usage/Application	Air And Non-combustible, Compatible Gases
Temperature Limits	-30 to 130 deg F ( -34.4 to 54.4 deg C)
Pressure Limits	Max. 50 in. w.c. (12.44 kPa) continuous, 2 psig (13.79 kPa) surge
Repeatability	+-1%
Process Connections	1/8″ female NPT

Dwyer 1620 Series Single and Dual Pressure Switches High Reliability, Repetitive Accuracy within ±1% On the Series 1620 Single and Dual Pressure Switch, our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model 1626 and 1627 differential pressure switches are identical in design and construction except that Model 1626 has a single electric switch and Model 1627 has dual electric switches. Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Both units have diaphragm sealed motion take outs providing maximum protection against leakage.

Caution:

For Use Only With Air Or Compatible Gases.

Product Applications:

Damper positioning
Duct air control

Features:

Up to 3900 readings can be saved
Entire memory can be read out in only 10 seconds
Watertight housing (IP65)
ComSoft 3 Basic Windows-compatible software facilitates graphs and tables, prints data, smoothes measurement curves, targeted value observation using crosshair function as well as logger programming and setting of limit values
Data transfer via serial interface

Dwyer 1627-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c.

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1627-1 Series1620
Pressure Range	.15-1.5″ W.C.
Weight	3 lb 11.8 oz
Electrical Rating	15A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz
Usage/Application	Damper Positioning
Temperature Limits	-30 to 130 deg F
Repeatability	+-1%
Agency Approvals	CE

Dwyer 1627-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c. Single and dual pressure switch, range .15-1.5″ w.c., .10 min. deadband, .20 max. deadband, 0.5 adj. diff. between set points.
Series 1620 Dual Pressure Switch, Range .15-1.5″ w.c., .10 min. Deadband, .20 max. Deadband, 0.5 Adj. Diff. Between Set Points High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has dual electric switches.Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Unit have diaphragm sealed motion take outs providing maximum protection against leakage.

Caution:

For Use Only With Air Or Compatible Gases.

Dwyer 1627-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	3 screw type, common, normally open and normally closed
Model Number	1627-10 Series 1620
Pressure Range	2.0-11″ W.C
Weight	3 lb 11.8 oz
Electrical Rating	15A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz
Usage/Application	Duct Air Control
Temperature Limits	-30 to 130 deg F
Pressure Limits	Max. 50 in. w.c. continuous, 2 psig surge
Switch Type	Two single-pole double throw (SPDT)
Repeatability	+-1%
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position
Set Point Adjustment	Screw adjustment
Agency Approvals	CE

Dwyer 1627-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c Single and dual pressure switch, range 2.0-11″ w.c., .25 min. deadband, .65 max. deadband, 2.3 adj. diff. between set points.
High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has dual electric switches.Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Unit have diaphragm sealed motion take outs providing maximum protection against leakage.

Caution:

For Use Only With Air Or Compatible Gases.

Dwyer 1627-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1627-20 Series1620
Pressure Range	8.0-24″ W.C
Weight	3 lb 11.8 oz
Electrical Rating	15A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz
Usage/Application	Damper Positioning
Temperature Limits	-30 to 130 deg F
Pressure Limits	Max. 50 in. w.c. continuous, 2 psig surge
Switch Type	Two single-pole double throw (SPDT)
Repeatability	+-1%
Electrical Connections	3 screw type, common, normally open and normally closed
Process Connections	1/8″ female NPT
Mounting Orientation	Diaphragm in vertical position
Set Point Adjustment	Screw adjustment
Agency Approvals	CE

Dwyer 1627-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c
Single and dual pressure switch, range 8.0-24″ w.c., .50 min. deadband, 1.20 max. deadband, 5.0 adj. diff. between set points. Series 1620 Single Electric Switch, Range 8.0-24″ w.c., .50 min. Deadband, 1.20 max. Deadband High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has dual electric switches.Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Unit have diaphragm sealed motion take outs providing maximum protection against leakage.

Caution:

For Use Only With Air Or Compatible Gases.

Dwyer 1627-05 Series 16220 Single and Dual Pressure Switch Range .5-6.0

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1627-05 Series 1620
Pressure Range	.5-6.0″ W.C
Weight	3 Ib,9.8 oz 1.64 kg
Usage/Application	Duct Air Control
Temperature Limits	-30 to 130 deg F
Process Connections	1/8″ female NPT
Agency Approvals	CE

Dwyer 1627-05 Series 16220 Single and Dual Pressure Switch Range .5-6.0 Single and dual pressure switch, range .5-6.0″ w.c., .15 min. deadband, .35 max. deadband, 1.2 adj. diff. between set points. Series 1620 Single Electric Switch, Range .5-6.0″ w.c., .15 min. Deadband, .35 max. Deadband High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has dual electric switches.Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Unit have diaphragm sealed motion take outs providing maximum protection against leakage.

Dwyer 1626-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c.

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1626-1
Application	Damper Positioning
Weight	1.64 kg
Electrical Rating	15 A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC,1/4 HP @ 250 VAC, 60 Hz
Temperature Limits	-30 to 130 deg F ( -34.4 to 54.4 deg C)
Pressure Limits	Max. 50 in. w.c. (12.44 kPa) continuous, 2 psig (13.79 kPa) surge
Repeatability	+-1%
Process Connections	1/8″ female NPT

Dwyer 1626-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c. Single and dual pressure switch, range .15-1.5″ w.c., .10 min. deadband, .20 max. deadband, 0.5 adj. diff. between set points. The Dwyer 1626-1 Single and Dual Pressure Switch has a range of .15-1.5″ w.c., 10 min. deadband, 20 max. deadband, and 0.5 adj. diff. between set points. Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model 1626 and 1627 differential pressure switches are identical in design and construction except that Model 1626 has a single electric switch and Model 1627 has dual electric switches. Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Both units have diaphragm sealed motion take outs providing maximum protection against leakage.

Caution:

For Use Only With Air Or Compatible Gases.

Product Applications:

Damper positioning
Duct air control

Features:

Up to 3900 readings can be saved
Entire memory can be read out in only 10 seconds
Watertight housing (IP65)
ComSoft 3 Basic Windows-compatible software facilitates graphs and tables, prints data, smoothes measurement curves, targeted value observation using crosshair function as well as logger programming and setting of limit values
Data transfer via serial interface

Dwyer 1626-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1626-10
Application	Damper Positioning
Weight	3 lb 9.8 oz
Electrical Rating	15A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz
Temperature Limits	-30 to 130 deg F
Repeatability	+-1%
Process Connections	1/8″ female NPT

Dwyer 1626-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c Single and dual pressure switch, range 2.0-11″ w.c., .25 min. deadband, .65 max. deadband, 2.3 adj. diff. between set points. Series 1620 Single Electric Switch, Range 2.0-11″ w.c., .25 min. Deadband, .65 max. Deadband High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has a single electric switch.

Caution:

For Use Only With Air Or Compatible Gases.

Dwyer 1626-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1626-20
Application	Duct Air Control
Weight	3 lb 9.8 oz

Dwyer 1626-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c Single and dual pressure switch, range 8.0-24″ w.c., .50 min. deadband, 1.20 max. deadband, 5.0 adj. diff. between set points. Series 1620 Single Electric Switch, Range 8.0-24″ w.c., .50 min. Deadband, 1.20 max. Deadband High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has a single electric switch.

Caution:

For Use Only With Air Or Compatible Gases.

Dwyer 1626-05 Series 1620 Single and Dual Pressure Switch Range .5-6.0″ w.c

Minimum Order Quantity	1 Number
Brand	Dwyer USA
Media Type	Gas
Electrical Connection	Screw Terminals
Model Number	1626-05
Application	Damper Positioning
Weight	3 Ib, 9.8 oz 1.64 kg
Electrical Rating	15A @ 120-480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz
Temperature Limits	-30 to 130 deg F
Repeatability	+-1%
Agency Approvals	CE

Dwyer 1626-05 Series 1620 Single and Dual Pressure Switch Range .5-6.0″ w.c Single and dual pressure switch, range .5-6.0″ w.c., .15 min. deadband, .35 max. deadband, 1.2 adj. diff. between set points. Series 1620 Single Electric Switch, Range .5-6.0″ w.c., .15 min. Deadband, .35 max. Deadband High Reliability, Repetitive Accuracy within ±1% Our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model differential pressure switches are identical in design and construction has a single electric switch.

Caution:

For Use Only With Air Or Compatible Gases.

Series RHP Humidity Temperature Transmitter Wholesaler

RHP-2D10 DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 Number
Model Name/Number	RHP-2D10
Brand	Dwyer USA
Voltage	10~35 VDC
Accuracy	2%
Usage/Application	Industrial
Product Weight	8.24 oz Gross Weight:1 lb
Protection Type	RHP-2D10 DWYER Humidity Temperature Transmitter
Part Type	RHP-2D10 DWYER Humidity Temperature Transmitter
Size	H x W x D:4 in x 4.4 in x 11.75 in
Item	RHP-2D10 DWYER Humidity Temperature Transmitter
Precautions For Use	Air Economizers,Outdoor Temperature and Relative Humidity Reference,Pool Room Humidity Monitoring
Sensor Output	4~20 mA
Humidity	0 to 100% RH
Packaging Type	1 NOS
Country of Origin	Made in India

RHP-2D10 DWYER Humidity Temperature Transmitter

Overview

Dwyer Instruments

Humidity Sensors, RHP Series

Item# RHP-2D10 – Duct Mount Humid- Ity Transmitter Wtih 2% Sensor And 4-20 Ma Output

RHP Series Information

The Series RHP Temperature and Humidity Transmitter Combine the Voltage or Current Humidity Transmitter output with a passive Temperature Thermistor or RTD output. Featuring Polymer Capacitance Humidity Sensors, Models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD Display.

Product Applications

Air Economizers
Outdoor Temperature and Relative Humidity Reference
Pool Room Humidity Monitoring

Specifications

Item Number: RHP-2D10
Brand:Dwyer Instruments
Item Category:HVAC Sensors
Subcategory:Humidity Sensors
Series:RHP
Application:Duct
Input:10~35 VDC
Output:4~20 mA
Display:None
Humidity Range:0 to 100% RH
Temperature Sensor:No
Approvals:CE
Size:H x W x D:4 in x 4.4 in x 11.75 in
Net Weight:8.24 oz
Gross Weight:1 lb

RHP-2D1B DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 Number
Model Name/Number	RHP-2D1B
Brand	DWYER USA
Voltage	4-20 mA
Accuracy	2%
Usage/Application	Industrial
Warranty	1 YERS
Color	WHITE
Item	RHP-2D1B DWYER Humidity Temperature Transmitter

RHP-2D1B DWYER Humidity Temperature Transmitter

RHP-2D1B | Dwyer Instruments | Humidity

Relative Humidity, Passive Temperature Sensor Transmitter, 2%, Duct Mount with Plastic Hydrophobic Filter, 4-20 mA RH Output, 10K @ 25°C Thermistor Type II, No Options

Manufacturer:Dwyer Instruments
MPN:RHP-2D1B
SKU:RHP-2D1B

FAMILY DESCRIPTION

The Series RHP Temperature and Humidity Transmitter Combine The Voltage or Current Humidity Transmitter Output With a Passive Temperature Thermistor or RTD Output.The Polymer Capacitance Humidity Sensor is Not Affected By Condensation,Fog, High Humidity,or Contaminants.The Humidity Sensors Are Available With 2% or 3% accuracies.Duct Mounted Transmitters Are Available With an Optional Two-Line Alpha Numeric LCD Display.Application Note: For Duct Mount Installations,The Sintered Filter Option Should Be Ordered For Applications Where The Humidity Transmitter Is Mounted In The Supply Air Duct After The Fan And Cooling Coils.

ENVIRO TECH Description – 2% DUCT RH/TEMP XMITER 4-20MA 10K II

Manufacturer – Dwyer Instruments

PRODUCT APPLICATIONS

Air Economizers
Outdoor Temperature and Relative Humidity Reference
Pool Room Humidity Monitoring

PRODUCT HIGHLIGHTS

Duct Mount
2% RH/Temperature Transmitter
4-20 mA RH Output
10K at 25 C Thermistor Temperature Output

PRODUCT FAMILY FEATURES

Robust Capacitance Humidity Sensor
Models With LCD Display
Interchangeable Filter And Replaceable Sensor Options

RHP-3D11 DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 No
Model Name/Number	RHP-3D11
Brand	DWYER USA
Voltage	0-5/10V
Accuracy	+-3%
Usage/Application	Industrial
Warranty	1 YEAR
Product Weight	Duct mount: .616 lb (.3 kg); OSA: 1 lb (.45 kg).
Rated Supply Voltage	0-5/10V
Response Time	15 seconds.

RHP-3D11 DWYER Humidity Temperature Transmitter

The Series RHP Temperature and Humidity Transmitter combine the Voltage or current Humidity Transmitter output with a passive temperature thermistor or RTD output. The polymer capacitance humidity sensor is not affected by condensation, fog, high humidity, or contaminants. The humidity sensors are available with 2% or 3% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display. Application Note: For duct mount installations, the sintered filter option should be ordered for applications where the Humidity Transmitter is mounted in the supply air duct after the fan and cooling coils.
Availability: Item ships in about Ships in 4-6 weeks
Product Highlights

Duct mount
3% RH/temperature transmitter
4-20 mA RH output
4-20 mA temperature output

OTHER CONFIGURATIONS AVAILABLE
PRODUCT SPECIFICATIONS

Relative Humidity Range: 0 to 100% RH.
Temperature Range: -40 to 140°F (-40 to 60°C).
Accuracy, RH: RHP-2XXX ±2% 10-90% RH @ 25°C; RHP-3XXX ±3% 20-80% RH @ 25°C; RHP-5XXX ±5% 20-80% RH @ 25°C.
Accuracy, Thermistor Temp Sensor: ±0.2°C @ 25°C (±0.36°F @ 77°F).
Accuracy, RTD Temp Sensor: DIN Class B; ±0.3°C @ 0°C (±0.54°F @ 32°F).
Hysteresis: ±1%.
Repeatability: ±0.1% typical.
Temperature Limits: -40 to 140°F (-40 to 60°C).
Storage Temperature: -40 to 176°F (-40 to 80°C).
Compensated Temperature Range: -4 to 140°F (-20 to 60°C).
4-20 mA Loop Powered Models: Power Requirements: 10-35 VDC. Output Signal: 4-20 mA.
0-5/10V Output Models: Power Requirements: 15-35 VDC or 15-29 VAC. Output Signal: 0-10V @ 5 mA max.
Response Time: 15 seconds.
Electrical Connections: Removable screw terminal block.
Conduit Connection: Duct Mount: 1/2″ NPS; OSA: 1/2″ (22.3 mm).
Drift: <1% RH/year.
RH Sensor: Capacitance polymer.
Temperature Sensor:

Types 1, 2, 3: Solid state band gap;
Curves A,B,C; Thermistor;
Curves D,E; Platinum RTD DIN 385. (See R-T Lookup Table).

Enclosure: Duct Mount: PBT; OSA: Polycarbonate.
Enclosure Rating: NEMA 4X (IP65) for OSA mount only.
Display: Duct Mount only, Optional 2-line alpha numeric, 8 characters/line.
Display Resolution: RH: 0.1%; 0.1°F (0.1°C).

RHP-3S22 DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 No
Usage/Application	For Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring
Model Name/Number	RHP-3S22
Brand	DWYER USA
Voltage	15 – 35 VDC or 15 – 29 VAC
Accuracy	3%
Warranty	YAS
Output Type	0 – 10 V (RH); 0 – 10 V (Temperature)
Size	5-1/8″ x 2-1/4″ x 6-25/32″

RHP-3S22 DWYER Humidity Temperature Transmitter

RHP-3S22 – DWYER HUMIDITY/TEMPERATURE TRANSMITTER, OUTSIDE AIR WITH SINTERED FILTER, 0-10V RH & TEMP

DESCRIPTION

The Series RHP Temperature and Humidity Transmitter combine the Voltage or Current Humidity Transmitter output with a Passive Temperature Thermistor or RTD output. The polymer capacitance Humidity Sensor is Not Affected by Condensation, Fog,High Humidity, or Contaminants.

• Housing Design – Outside Air With Sintered Filter

PRODUCTS INFORMATION

MANUFACTURER:Dwyer
PART NUMBER:RHP-3S22
SHORT DESCRIPTION:RHP-3S22 – Humidity/Temperature Transmitter, 3%, Outside Air with Sintered Filter, 0-10V RH and Temperature Output
PRODUCT SERIES:Dwyer RHP Series Humidity/Temperature Transmitter
TEMPERATURE TYPE:Humidity/Temperature Sensors
SENSOR TYPE:Outdoor Sensor
ACCURACY:3%
RELATIVE HUMIDITY RANGE:0 to 100%
ACCURACY (TEMP):+/-0.2°C at 25°C
CONNECTION:Conduit Connection: 1/2″ NPS; Electrical Connection: Removable Screw Terminal Block
OUTPUT(S):0 – 10 V (RH); 0 – 10 V (Temperature)
VOLTAGE:15 – 35 VDC or 15 – 29 VAC
MAX TEMPERATURE:-40 to 140
CONSTRUCTION:Polycarbonate Housing
HOUSING TYPE:RHP Series OSA w/Sintered Filter
STANDARDS/APPROVALS:CE Approved
DIMENSIONS:5-1/8″ x 2-1/4″ x 6-25/32″
ADDITIONAL PRODUCTS OR REQUIREMENTS:Related Items: A-452, A-453, RHRS
USED WITH:Air Handling Economizers
APPLICATIONS:For Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring

RHP-2D22 DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 No
Usage/Application	For Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring
Model Name/Number	RHP-2D22
Brand	DWYER USA
Voltage	15 – 35 VDC or 15 – 29 VAC
Accuracy	2%
Warranty	YAS
Output Type	0 – 10 V (RH); 0 – 10 V (Temperature)
Size	3-7/16″ x 11.59″

RHP-2D22 DWYER Humidity Temperature Transmitter

RHP-2D22 – DWYER HUMIDITY/TEMPERATURE TRANSMITTER, OUTSIDE AIR WITH SINTERED FILTER, 0-10V RH & TEMP

DESCRIPTION

The Series RHP Temperature and Humidity Transmitter Combine The Voltage or Current Humidity Transmitter Output With a Passive Temperature Thermistor or RTD Output. The polymer capacitance Humidity Sensor is Not Affected by Condensation, Fog,High Humidity, or Contaminants.
• Housing Design – Outside Air With Sintered Filter

PRODUCTS INFORMATION

MANUFACTURER:Dwyer
PART NUMBER:RHP-2D22
SHORT DESCRIPTION:RHP-2D22 – Humidity/Temperature Transmitter, 3%, Outside Air with Sintered Filter, 0-10V RH and Temperature Output
PRODUCT SERIES:Dwyer RHP Series Humidity/Temperature Transmitter
TEMPERATURE TYPE:Humidity/Temperature Sensors
SENSOR TYPE:Outdoor Sensor
ACCURACY:2%
RELATIVE HUMIDITY RANGE:0 to 100%
ACCURACY (TEMP):+/-0.2°C at 25°C
CONNECTION:Conduit Connection: 1/2″ NPS; Electrical Connection: Removable Screw Terminal Block
OUTPUT(S):0 – 10 V (RH); 0 – 10 V (Temperature)
VOLTAGE:15 – 35 VDC or 15 – 29 VAC
MAX TEMPERATURE:-40 to 140
CONSTRUCTION:PBT Housing
HOUSING TYPE:RHP Series Duct Mount w/Membrane Filter
STANDARDS/APPROVALS:CE Approved
DIMENSIONS:3-7/16″ x 11.59″
ADDITIONAL PRODUCTS OR REQUIREMENTS:Related Items: A-452, A-453, RHRS
USED WITH:Air Handling Economizers
APPLICATIONS:For Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring

RHP-3O22 DWYER Humidity Temperature Transmitter

Minimum Order Quantity	12 No
Usage/Application	For Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring
Model Name/Number	RHP-3O22
Brand	DWYER USA
Voltage	15 – 35 VDC or 15 – 29 VAC
Accuracy	3%
Warranty	YAS
Temperature Range	-40 to 140 DegreeF
Output Type	0 – 10 V (RH), 0 – 10 V (Temperature)
Part Type	DWYER Humidity Temperature Transmitter
Size	5-1/8″ x 2-15/64″ x 6-25/32″
Item	NEW
Temp Range	-40 to 140 DegreeF
Humidity	0 – 100%
Packaging Type	1

RHP-3O22 DWYER Humidity Temperature Transmitter

RHP-3O22 – DWYER HUMIDITY/TEMPERATURE TRANSMITTER, 3%, OSA (OUTSIDE AIR)

DESCRIPTION

The Series RHP Temperature and Humidity Transmitter Combine The Voltage or Current Humidity Transmitter Output With a Passive Temperature Thermistor or RTD output. The Polymer Capacitance Humidity Sensor is Not Affected By Condensation, Fog, High Humidity, Or Contaminants.
• Housing Design – Outside Air

PRODUCTS INFORMATION

MANUFACTURER:Dwyer
PART NUMBER:RHP-3O22
SHORT DESCRIPTION:RHP-3O22 – Humidity/Temperature Transmitter, 3%, OSA (Outside Air), 0-10V RH and 0-10V Temperature Output
PRODUCT SERIES:Dwyer RHP Series Humidity/Temperature Transmitter
TEMPERATURE TYPE:Humidity/Temperature Sensors
ACCURACY:3%
RELATIVE HUMIDITY RANGE:0 – 100%
ACCURACY (TEMP):+/-0.2°C at 25°C
CONNECTION:Electrical Connection: Removable Screw Terminal Block, Conduit Connection: 1/2″
OUTPUT(S):0 – 10 V (RH), 0 – 10 V (Temperature)
VOLTAGE:15 – 35 VDC or 15 – 29 VAC
MAX TEMPERATURE:-40 to 140°F
CONSTRUCTION:Polycarbonate
MOUNTING OPTIONS:OSA (Outside Air)
HOUSING TYPE:RHP Series OSA (Outside Air)
STANDARDS/APPROVALS:CE Approved
DIMENSIONS:5-1/8″ x 2-15/64″ x 6-25/32″
ADDITIONAL PRODUCTS OR REQUIREMENTS:Related Items: A-452, A-453, RHRS
APPLICATIONS:For Air Economizers, Outdoor Temperature and Relative Humidity Reference, Pool Room Humidity Monitoring

DWYER Series RHP Humidity Temperature Transmitter

Minimum Order Quantity	12 No
Model Name/Number	DWYER Series RHP
Brand	DWYER USA
Accuracy	2%, 3% or 5%
Usage/Application	Industrial
Warranty	YAS
Part Type	DWYER Series RHP
Item	NEW
Packaging Type	1

Series RHP Humidity/Temperature Transmitter

Passive Temperature Outputs, Sintered Filter Options

The Series RHP Temperature and Humidity Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.

Product Applications

Air Economizers,Outdoor Temperature and Relative Humidity Reference,Pool Room Humidity Monitoring

Model Description

RHP-2D10:Duct mount 2% RH transmitter with 4-20 mA RH output.
RHP-2D11:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 4-20 mA temperature output.
RHP-2D11-LCD:Duct mount 2% RH/temperature transmitter, 4-20 mA RH output and 4-20 mA temperature output, with LCD.
RHP-2D1A:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 10K Curve A passive temperature output.
RHP-2D1B:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 10K @ 25°C thermistor temperature output.
RHP-2D1D:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 100 Ohm RTD Curve D passive temperature output.
RHP-2D1E:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 1K Ohm RTD DIN 385 temperature output.
RHP-2D1F:Duct mount 2% RH/temperature transmitter with 4-20 mA RH output and 20K NTC thermistor temperature output.
RHP-2D20:Duct mount 2% RH transmitter with 0-10 VDC RH output.
RHP-2D22:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 0-10 VDC temperature output.
RHP-2D22-LCD:Duct mount 2% RH/temperature transmitter, 0-10 VDC RH output and 0-10 VDC temperature output, with LCD.
RHP-2D2A:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 10K Curve A passive temperature output.
RHP-2D2B:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 10K @ 25°C thermistor temperature output.
RHP-2D2D:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 100 Ohm RTD Curve D passive temperature output.
RHP-2D2E:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 1K Ohm RTD DIN 385 temperature output.
RHP-2D2F:Duct mount 2% RH/temperature transmitter with 0-10 VDC RH output and 20K NTC thermistor temperature output.
RHP-2M11:Sintered filter duct mount humidity/temperature transmitter with 2% sensor, 4 to 20 mA output for humidity and temperature.
RHP-2M22:Sintered filter duct mount humidity/temperature transmitter with 2% sensor, 0 to 10 V output for humidity and temperature.
RHP-2O10:OSA 2% RH transmitter with 4-20 mA RH output.
RHP-2O11:OSA 2% RH/temperature transmitter with 4-20 mA RH output and 4-20 mA temperature output.
RHP-2O1A:OSA mount 2% RH/temperature transmitter with 4-20 mA RH output and 10K type III NTC thermistor temperature output.
RHP-2O1B:OSA mount 2% RH/temperature transmitter with 4-20 mA RH output and 10K type II NTC thermistor temperature output.
RHP-2O1D:OSA mount 2% RH/temperature transmitter with 4-20 mA RH output and Pt100 RTD temperature output.
RHP-2O1E:OSA mount 2% RH/temperature transmitter with 4-20 mA RH output and Pt1000 RTD temperature output.
RHP-2O1F:OSA mount 2% RH/temperature transmitter with 4-20 mA RH output and 20K NTC thermistor temperature output.
RHP-2O20:OSA 2% RH transmitter with 0-10 VDC RH output.

Series 2-5000 Minihelic II Differential Pressure Gage Wholesaler

Series 2-5000 Minihelic II Differential Pressure Gauge

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	Series 2-5000
Model Name/Number	Series 2-5000
Usage/Application	Duct
Connection	New
Housing	Glass Filled Nylon Polycarbonate Lens
Service	Air and Compatible Gases
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection
Mounting Orientation	Diaphragm in Vertical Position
Weight	6 oz (170.1 g)
Agency Approvals	Meets the technical requirements of EU Directive 2011/65/EU (RoHS II)

Series 2-5000 Minihelic II Differential Pressure
Gage

Combining High Accuracy, Compactness, Dependability, and Low CostCombining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Series 2-5000 Minihelic® II Differential Pressure Gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig

Product Applications:

Room Positive Pressure Sensing
Local Indication on Filter Status
Face Velocity on Fume Hood
Duct Pressures
Cabinet Air-Purging
Medical Respiratory Equipment
Air Samplers
Electronic Air Cooling Systems
Laminar Flow Hoods

Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0 – 25 MM WC

Minimum Order Quantity	12 Number
Brand	Dwyer USA
Measuring Range	0 – 25 MM WC
Model Name/Number	2-5000-25MM
Usage/Application	Duct
Material	Glass Filled Nylon Polycarbonate Lens
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight	6 oz (170.1 g)
Dial Size	67 MM

Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0-25 MM W.C Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-25mm Minihelic Ii, Differential Pressure Gauge, 0/25mm

Housing is molded from Strong Mineral and Glass Filled Nylon.
Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
Full view lens is Removable and Molded of Tough Acrylic.
Aluminum scale litho-printed black on white, enhances Readability.
Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-50MM Minihelic II Differential Pressure Gauge 0-50 MM WC

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-50 MM WC
Model Name/Number	Dwyer 2-5000-50MM
Usage/Application	Duct
Material	Glass Filled Nylon Polycarbonate Lens
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight	6 oz (170.1 g)
Size	67 MM

Dwyer 2-5000-50MM Minihelic II Differnntial Pressure Gauge 0-50 MM w.c Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-50mm Minihelic Ii, Differential Pressure Gauge, 0/50mm

Housing is molded from Strong Mineral and Glass Filled Nylon.
Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
Full view lens is Removable and Molded of Tough Acrylic.
Aluminum scale litho-printed black on white, enhances Readability.
Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-100MM Minihelic II Differential Pressure Gauge 0-100 MM WC

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-100 MM WC
Model Name/Number	Dwyer 2-5000-100MM
Usage/Application	Duct
Material	Glass Filled Nylon Polycarbonate Lens
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Dial Size	67 MM
Pressure Limits	30 psig (2.067 bar) Continuous to Either Pressure Connection
Temperature Limits	20 to 120 deg F (-6.67 to 48.9 deg C)

Dwyer 2-5000-100MM Minihelic II Differnntial Pressure Gauge 0-100 MM w.c Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-100mm Minihelic Ii, Differential Pressure Gauge, 0/100mm

Housing is molded from Strong Mineral and Glass Filled Nylon.
Pointer Stops of Molded Rubber Prevent Pointer Over-Travel Without Damage.
Full view lens is Removable and Molded of Tough Acrylic.
Aluminum scale litho-printed black on white, enhances Readability.
Red Tipped Aluminum Pointer, Rigidly Mounted to Helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-125 Pa
Model Name/Number	Dwyer 2-5000-125PA
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 deg F (21.1 deg C)
Weight	6 oz (170.1 g)
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa
Housing is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops Of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-125pa Minihelic Ii, Differential Pressure Gauge, 0/125 Pa

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-250PA Minihelic II Differential Pressure Gauge 0-250 Pa

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-250 Pa
Model Name/Number	Dwyer 2-5000-250PA
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight	6 oz (170.1 g)
Dial Size	63 mm
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-250PA Minihelic II Differential Pressure Gauge 0-250 Pa
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-250pa Minihelic Ii, Differential Pressure Gauge, 0/250 Pa

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-500 Pa
Model Name/Number	Dwyer 2-5000-500PA
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature	20 to 120 Degree F (-6.67 to 48.9 Deg C)
Weight	6 oz (170.1 g)
Size	63 MM
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-500pa Minihelic Ii, Differential Pressure Gauge, 0/500pa

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-1KPA Minihelic II Differential Pressure Gauge 0-1 KPA

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-1 KPA
Model Name/Number	Dwyer 2-5000-1KPA
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Weight	6 oz (170.1 g)
Dial Size	63 MM
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection
Temperature Limits	20 to 120 deg F (-6.67 to 48.9 deg C)
Mounting Orientation	Diaphragm in Vertical Position

Dwyer 2-5000-1KPA Minihelic II Differential Pressure Gauge 0-1 KPA
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-1kpa Minihelic Ii, Differential Pressure Gauge, 0/1 Kpa

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Dwyer 2-5000-3KPA Minihelic II Differential Pressure Gauge 0-3 KPA

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-3 KPA
Model Name/Number	Dwyer 2-5000-3KPA
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature	20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Dial Size	63 MM
Mounting	Diaphragm In Vertical Position
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-3KPA Minihelic II Differential Pressure Gauge 0-3 KPA
Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-3kpa Minihelic Ii, Differential Pressure Gauge, 0/3 Kpa

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm

Dwyer 2-5205-5PSI Minihelic II Differential Pressure Gauge 0-5 PSI

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-5 PSI
Model Name/Number	Dwyer 2-5205-5PSI
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 DegreeF (21.1 DegreeC)
Temperature	20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Weight	6 oz (170.1 g)
Dial Size	63 MM
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection
Temperature Limits	20 to 120 deg F (-6.67 to 48.9 deg C)
Mounting Orientation	Diaphragm in Vertical Position

Dwyer 2-5205-5PSI Minihelic II Differential Pressure Gauge 0-5 PSI
Designed For Panel Mounting in a 2-5/8″ Diameter Hole. Pressure Connections Are Barbed. Dwyer 2-5205 Minihelic II Differential Pressure Gauge
The Dwyer 2-5205 Differential Pressure Gauge has barbed connections and a range of 0-5 psi. Combining clean design , small size and low cost with enough accuracy for all but the most demanding applications our Minihelic® II gauge offers the latest in design Features for a dial type differential pressure gauge. It is our most compact gauge but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic® II gauge is designed for panel mounting in a single 2-5/8″ diameter hole. Standard pressure connections are barbed fittings for 3/16″ ID tubing; optional 1/8″ male NPT connections are also available. Over-Pressure protection is built into the Minihelic® II gauge by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gauge. With removable lens and rear housing, the gauge may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gauge will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic® II gauge make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gauge, the Minihelic® II gauge finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic® II gauge is suitable for many of the same applications as the Magnehelic® gauge where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic® gauge are not required.

Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH

Minimum Order Quantity	10 Number
Brand	Dwyer USA
Measuring Range	0-0.5 inch
Model Name/Number	Dwyer 2-5000-0
Usage/Application	Industrial
Accuracy	+-5% of FS at 70 deg F (21.1 deg C)
Temperature	20 to 120 DegreeF (-6.67 to 48.9 DegreeC)
Weight	6 oz (170.1 g)
Dial Size	63 MM
Pressure Limits	30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-0 Minihelic Ii, Differential Pressure Gauge, 0/0.5

Housing is molded from strong mineral and glass filled nylon.
Pointer stops of molded rubber prevent pointer over-travel without damage.
Full view lens is removable and molded of tough acrylic.
Aluminum scale litho-printed black on white, enhances readability.
Red tipped aluminum pointer, rigidly mounted to helix is easy to see.
Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.
Jewel bearings provide virtually friction-free helix motion.
Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.
Zero adjustment screw, located behind the removable lens, eliminates tampering.
Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.
Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.
Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.
Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.
Low pressure tap connects to rear chamber.
Coil spring link provides a resilient connection between the diaphragm and the range spring.
Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.
High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

Series 251 Wet Differential Pressure Transmitter

Sensocon Series 251-04 Wet Differential Pressure Transmitter

Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Operating Temperature	-40o to 185o F (-40o to 85o C)
Over Pressure	Positive – 2x F.S.; negative – 1x F.S.
Working Pressure	1000 PSI (7MPa)
Stability	0.5% F.S/yr
Response Time	100 ms

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm
sensor technology that outperforms standard double sensor products in accuracy,
reliability and static operating pressure. This differential pressure sensing technology
offers 0.25% accuracy with static operating pressures up to 1000 PSI (7 MPa). The
Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP
65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn
down and comes standard with a certificate of calibration.

Sensocon Series 251-05 Wet Differential Pressure Transmitter

Brand	Sensocon
Measuring Range	Series 251-05
Model Name/Number	Series 251-05
Usage/Application	Industrial
Connection	New
Model No.	Series 251
Accuracy	+/- 0.25% F.S.
Over Pressure	Positive – 2x F.S.; negative – 1x F.S.
Working Pressure	1000 PSI (7MPa)
Power Supply	12-36 VDC
Response Time	100 ms

Sensocon USA Wet/Wet Differential Pressure Transmitter Series 251-05

The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Media compatibility:
Gas and Liquids compatible with 316SS
Accuracy:
+/- 0.25% F.S.
Over Pressure:
positive – 2x f.S.; negative-1x F.S.
Working Pressure:
1000 PSI (7MPa)
Temperature Limits:
Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)
Thermal Effect:
+/- 0.028% FS/°F (0.050%FS/°C)
Stability:
+/- 0.5% FS/year
Power Supply:
12-30 VDC
Output Signal:
4-20 mA, 2-wire
Electrical Connetction:
mini DIN 43650
Response Time:
100 ms
Turn Down:
5:1
Enclosure Rating:
NEMA 4X (IP 65)
Process Connection:
1/4″ NPT female, optional 1/4″ G
Mounting Position Effect:
0.1% F.S., can be corrected by zero adjust

Model Number Range
251-05 0 – 50 PSI ( 344.7 kPa )

Sensocon Series 251-01 Wet Differential Pressure Transmitter

Minimum Order Quantity	1 Number
Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Response Time	100 ms
Media Compatibility	Gas and Liquids compatible with 316SS
Over Pressure	Positive – 2x F.S.; negative – 1x F.S.
Working Pressure	1000 PSI (7MPa)
Thermal Effect	0.028%/o F (0.050%/o C)
Power Supply	12-36 VDC

Sensocon USA Series 251-01 Wet Differential Pressure Transmitter

The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration

Media compatibility:Gas and Liquids compatible with 316SSAccuracy:+/- 0.25% F.S.Over Pressure:positive – 2x f.S.; negative-1x F.S.Working Pressure:1000 PSI (7MPa)Temperature Limits:Operating: -40° to 185°F (-40° to 85°C)
Compensated: -4° to 158°F (-20° to 70°C)Thermal Effect:+/- 0.028% FS/°F (0.050%FS/°C)Stability:+/- 0.5% FS/yearPower Supply:12-30 VDCOutput Signal:4-20 mA, 2-wireElectrical Connetction:mini DIN 43650Response Time:100 msTurn Down:5:1Enclosure Rating:NEMA 4X (IP 65)Process Connection:1/4″ NPT female, optional 1/4″ GMounting Position Effect:

0.1% F.S., can be corrected by zero adjust

Model Number	Range
251-01	0 – 5 PSI ( 34.5 kPa )

Sensocon Series 251-02 Wet Differential Pressure Transmitter

Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Media Compatibility	Gas and Liquids compatible with 316SS
Working Pressure	1000 PSI (7MPa)
Thermal Effect	0.028%/o F (0.050%/o C)
Power Supply	12-36 VDC
Output Signal	4-20 mA, 2 wire

Sensocon Series 251-08 Wet Differential Pressure Transmitter

Brand	Sensocon
Model No.	SERIES 251-08
Accuracy	+/- 0.25% F.S.
Media Compatibility	Gas and Liquids compatible with 316SS
Over Pressure	Positive – 2x F.S.; negative – 1x F.S.
Working Pressure	1000 PSI (7MPa)
Thermal Effect	0.028%/o F (0.050%/o C)
Power Supply	12-36 VDC
Response Time	100 ms

Sensocon Series 251-07 Wet Differential Pressure Transmitter

Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Media Compatibility	Gas and Liquids compatible with 316SS
Working Pressure	1000 PSI (7MPa)
Thermal Effect	0.028%/o F (0.050%/o C)
Stability	0.5% F.S/yr
Power Supply	12-36 VDC

Sensocon Series 251-06 Wet Differential Pressure Transmitter

Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Media Compatibility	Gas and Liquids compatible with 316SS
Working Pressure	1000 PSI (7MPa)
Power Supply	12-36 VDC
Response Time	100 ms

Sensocon Series 251-03 Wet Differential Pressure Transmitter

Brand	Sensocon
Accuracy	+/- 0.25% F.S.
Over Pressure	Positive – 2x F.S.; negative – 1x F.S.
Working Pressure	1000 PSI (7MPa)
Thermal Effect	0.028%/o F (0.050%/o C)
Stability	0.5% F.S/yr
Output Signal	4-20 mA, 2 wire

The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration

Series 251 Wet Differential Pressure Transmitter

Accuracy	+/- 0.25%
Response Time	10 ms
Working Pressure	1000 PSI (7MPa)
Power Supply	12-36 VDC
Housing Material	316 SS
Protection	IP 65
Output Signal	4-20 mA, 2-wire

The Series 251 Wet/Wet Differential Pressure Transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.

Model Number	Range
251-01	0 – 5 PSI ( 34.5 kPa )
251-02	0 – 10 PSI ( 68.9 kPa )
251-03	0 – 15 PSI ( 103 kPa )
251-04	0 – 30 PSI ( 206.8 kPa )
251-05	0 – 50 PSI ( 344.7 kPa )
251-06	0 – 100 PSI ( 689.5 kPa )
251-07	0 – 150 PSI ( 1034 kPa )
251-08	0 – 300 PSI ( 2068 kPa )

ENVIRO TECH / Replacement Filter In Assam

ENVIRO TECH / Replacement Filter In Assam

With a Firm Commitment To Quality and Customer Satisfaction, We Specialize In The Manufacturing And Supply of ENVIRO TECH Replacement Filters Across INDIA. Our Diverse Product Range Includes a Complete Line of Filters And Cartridges Designed For Low, Medium, And High-Pressure Applications. Each Filter is Available In Various Media Efficiency Options, Ensuring Optimal Performance Tailored To Your Specific Application Needs.

A Sole Proprietorship (Individual) Based Company, Actively Engaged In Manufacturing And Supplying The Best Quality Array Of Air Filter, Oil Filter, Gas Filter, Fuel Filter, Hydraulic Filter etc.

WE ARE MANUFACTURER FOR INDUSTRIAL FILTER LIKE THIS ENVIRO TECH,HYDAC,REXROTH, PALL,Triveni,PARKER,MP FILTRI,MAHLE, STUFF, FILTREC,INTERNORMAN, EPE & BHAGWATI REPLACEMENT ALL TYPE FILTER.

MATERIAL

Wire Mesh
Glass Fibre Paper
1 Micron To 1000 Micron

INDUSTRIAL USES

POWER PLANT
CEMENT PLANT
STEEL PLANT
FERTILIZER
TEXTILE

Additional Information:

Item Code: ENVIRO TECH / Replacement Filter In Assam
WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
www.envirotechindia.co.in
www.envirotechdelhi.in
www.envirotechdelhi.net
www.envirotechindia.info
www.envirotechdelhi.info
www.envirotechindia.net
www.envirotechdelhi.co.in

Setra USA Model 265 Differential Pressure Transducer Wholesaler

Setra Model 265 Differential Pressure Transducer Range 0- 50 Pac

Brand	Setra
Frequency Range	0- 50 PAC
Usage/Application	Static duct and cleanroom pressures
Output Voltage	9 to 30VDC
Automation Grade	Manual
Weight	0.09 Kg
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 50 PAC 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 25 Inch

Brand	Setra
Frequency Range	0- 25 inch
Usage/Application	Variable Air Volume and Fan Control
Automation Grade	Manual
Weight	0.09 Kg
Output Type	9 to 30VDC
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 25 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 10 Inch

Model Number	2651-010WDACT1C
Brand	Setra
Frequency Range	0- 10 inch
Usage/Application	HVAC systems
Product Weight	0.09 Kg
Output Type	9 to 30VDC @ 20 mA

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

Features:

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Informations:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0-10 Inch 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 2.5 Inch

Minimum Order Quantity	1 Number
Application	HVAC systems
Model Number	265
Brand	Setra USA
Frequency Range	0- 2.5 INCH
Usage/Application	Energy management systems
Display Type	no
Automation Grade	Manual
Product Weight	0.09 Kg
Range	0- 2.5 INCH
Output Type	9 to 30VDC
Weight	0.09 Kg
Warranty	yas
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d
Net Weight	0.09 Kg
Certification Required	Yes
Applications	Variable Air Volume and Fan Control (VAV)
I deal in	New Only

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K¿¿¿, 4-20mA @ 750¿¿¿ (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150¿¿¿ (-18 to 65¿¿¿)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 2.5 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 1 Inch

Brand	Setra
Frequency Range	0- 1 inch
Usage/Application	Energy management systems
Automation Grade	Manual
Product Weight	0.09 Kg
Output Type	9 to 30 VDC
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 1 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 0.5 Inch

Brand	Setra
Frequency Range	0- 0.5 inch
Usage/Application	Static duct and cleanroom pressures
Automation Grade	Manual
Product Weight	0.09 Kg
Output Type	9 to 30VDC
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 0.5 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 25 Pac

Brand	Setra
Frequency Range	0- 25 PAC
Usage/Application	Environmental pollution control
Output Voltage	9 to 30VDC
Automation Grade	Manual
Product Weight	0.09 Kg
Size/Dimension	3.16 Inch w x 1.89 Inch h x 1.64 Inch d

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 25 PAC 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 50 Inch

Brand	Setra
Frequency Range	0- 50 inch
Usage/Application	HVAC systems
Product Weight	0.09 Kg
Output Type	9 to 30VDC

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K¿¿¿, 4-20mA @ 750¿¿¿ (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150¿¿¿ (-18 to 65¿¿¿)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

Features:

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 50 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 5 Inch

Brand	Setra
Frequency Range	0- 5 inch
Usage/Application	Static duct and cleanroom pressures
Product Weight	0.09 Kg
Output Type	9 to 30 VDC

Supply Voltage

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 5 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer

Brand	Setra
Automation Grade	Manual
Weight	3 ounces
Power Supply	0-5 VDC
Usage/Application	Switches
Output Voltage	4-20 mA
Pressure	12 mA
Electrical Load	0 to 800 Ohms
Pressure Fittings	1/4″ Fitting

Setra Systems 265 pressure transducers sense Differential or gauge static pres sures andconvert this pressure difference to a proportional electrical output.The 265 is offered witha high level 0-5 VDC output or a 4-20 mA output.It is also offered with 0-5 or 0-10 VDC output in the 24 VAC excitation version. Used in Building Energy Management Systems, these transducers are capable of measuring pressures and fl ows with the accuracy necessary for proper building pressurization and air flow control. The 265 Series very low pressure transducers are available for air pressure ranges as low as 0.25 in. WC full scale up to 100 in. WC full scale. Static accuracy is±1% full scale in normal ambient temperature environments.The units are temperature compensated to less than ±0.033% FS/oF of thermal error over the temperature range of 0oF to +150oF. The Model 265utilizes an improved all stainless steel micro-tig welded sensor. The tensioned stainless steel diaphragm and insulated stainless steel electrode,positioned close tothe diaphragm, form a variable capacitor. Positive pressure moves the diaphragm toward the electrode, increasing the capacitance. A decrease in pressure moves the diaphragm awayfrom the electrode, decreasing the capacitance.The change in capacitance is detected and converted to a linear DC electrical signal by Setra’s unique electronic circuit. The micro-tig welded tension sensor allows up to 10 PSI overpressure range dependent with no damage to the unit.In addition, the sensor parts have thermally matched coeffi cients, which promote improved temperature performance and excellent long-term stability.

Unidirectional Pressure Bidirectional Pressure:

0 to 0.25 in. WC 0 to ±0.1 in. WC
0 to 0.5 in. WC 0 to ±0.25 in. WC
0 to 1 in. WC 0 to ±0.5 in. WC
0 to 2.5 in. WC 0 to ±1 in. WC
0 to 5 in. WC 0 to ±2.5 in. WC
0 to 10 in. WC 0 to ±5 in. WC
0 to 25 in. WC 0 to ±10 in. WC
0 to 50 in. WC 0 to ±25 in. WC
0 to 100 in. WC 0 to ±50 in. WC
0 to 25 Pa ±25 Pa
0 to 50 Pa ±50 Pa
0 to 100 Pa ±100 Pa
0 to 250 Pa ±250 Pa
0 to 500 Pa ±500 Pa
0 to 1000 Pa ±1000 Pa

Applications:

Heating, Ventilating and

Air Conditioning (HVAC)
Energy Management Systems
Variable Air Volume and Fan Control (VAV)
Environmental Pollution Control
Static Duct and Clean Room Pressures
Oven Pressurization and

Furnace Draft Controls

Setra Model 265 Differential Pressure Transducer Range 0- 1000 Pac

Transducer Type	Pressure Transducer
Brand	Setra
Voltage	9 to 30VDC
Size	8.0 x 4.8 x 4.2 cm
Mounting Type	2,#10 screws
Pressure Range	0- 1000 PAC

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

Features:

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0-1000 PA 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 100 Pac

Transducer Type	Pressure Transducer
Brand	Setra
Usage/Application	Heating Ventilating and Air Conditioning
Size	3.16 Inch w x 1.89 Inch h x 1.64 Inch d
Mounting Type	2,10 screws
Pressure Range	0- 100 PAC
Supply Media	24 VDC or 24 VAC

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 100 PAC) 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 100 Inch

Transducer Type	Pressure Transducer
Brand	Setra
Usage/Application	Energy management systems
Output Voltage	9 to 30VDC
Size	3.16 Inch w x 1.89 Inch h x 1.64 Inch d
Mounting Type	2,10 screws
Weight	0.09 Kg

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

More Information:

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 100 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 500 Pac

Transducer Type	Pressure Transducer
Brand	Setra
Power	24 VDC or 24 VAC
Usage/Application	Heating Ventilating and Air Conditioning
Size	3.16 Inch w x 1.89 Inch h x 1.64 Inch d
Mounting Type	2,10 screws
Energy Management Systems	Variable Air Volume and Fan Control
Environmental Pollution Control	Static Duct and Clean Room Pressures

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 500 PAC) 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 250 Pac

Transducer Type	Pressure Transducer
Brand	Setra
Power	24 VDC or 24 VAC
Usage/Application	Heating Ventilating and Air Conditioning
Size	3.16 Inch w x 1.89 Inch h x 1.64 Inch d
Mounting Type	2,10 screws
Energy Management Systems	Variable Air Volume and Fan Control
Environmental Pollution Control	Static Duct and Clean Room Pressures

Supply Voltage:

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 250 PAC) 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Setra Model 265 Differential Pressure Transducer Range 0- 0.25 Inch

Transducer Type	Pressure Transducer
Brand	Setra
Usage/Application	Variable Air Volume and Fan Control
Size	3.16 Inch w x 1.89 Inch h x 1.64 Inch d,8.0 x 4.8 x 4.2 cm
Mounting Type	2 and 10 screws

Supply Voltage

Current output -9 to 30VDC @ 20 mA
Voltage Output – 0-5(10)v output 9(12) to 30VAC @ 0.6 VA; 0-5(10)v output 9(12) to 30V @ 25 mA
Accuracy – ± 1% Full scale, Opt .4% and .25%
Signal Output – 0-5V @ 5K???, 4-20mA @ 750??? (loop powered)
Sensor Type – Capacitive
Adjustments – (Z/S) Zero & Span trim POTs
Normal Measurement Range – (0 to 100″WC) or±(0.1 to 50″WC)
Overpressure – (Burst) ±10 psid (68.95 kPa)
Max Operating Pressure – (Proof) -50″WC to +100″WC
Operating Temperature – 0 to 150??? (-18 to 65???)
Operating Humidity – 10 to 95% Non-condensing
Wetted Parts – Stainless steel
Media Compatibility – Inert dry air
Process Connection – 3/16″OD plastic, for 1/4″ OD tubing
Wiring Exposed terminals – 2-(4-20mA), 3-(Volts)
Mounting – 2 , #10 screws
Enclosure Rating – NEMA1 equivalent, plastic UL94-V-0
Dimensions – 3.16″ w x 1.89″ h x 1.64″d, (8.0 x 4.8 x 4.2 cm)
Weight – 0.19 lb (0.09 Kg)
Approvals – CE
Warranty – 1 year

1% accuracy improves variable air volume

Optional accuracies 0.4% or 0.25% FS

24 VDC or 24 VAC excitation

Signal level 0-5 VDC, 0-10 VDC or 2-Wire 4-20 mA

UL94-V-), rated for Plenums

Fully protected against reverse wiring

Family Description – The Setra Model 265 Differential Pressure Transducer Provides Superior Positive and Negative Pressure Sensing Required For High Efficiency, Air-Control Systems. The Model 265 is a ±1.0% Full Scale Accuracy unit (±0.4%, ±0.25% FS Optional) With an Available Snap-on Conduit Enclosure Molded From High Impact Lexan®.
Enviro Tech Description – DP TRAN 0- 0.25 INCH 24 VDC/0-5VDC +/-1% FS W/ CERT
Manufacturer – SETRA USA

Dwyer USA Mark II Plastic Manometer Wholesaler

Mark II Model 40-1-AV Dwyer Manometer Range 0-1.1 Inches w.c

Material	Molded Plastic
Accuracy	+-3% FS
Model Name/Number	MARK II MODEL 40-1-AV MANOMETER
Brand	Dwyer USA
Scale Length	Approx. 8-1/4″ (21 cm)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Weight	1.04 lb (472 g)/1.23 lb (558 g)

Mark II Model 40-1-AV Dwyer Manometer Range 0-1.1 Inches w.c
Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for air velocity and air filter gage applications. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:
Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Below are other pressure ranges available for Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 40-1	.1-0-1.0 in w.c.	Red oil, .826 s.g.
Mark II 40-25mm	0-26 mm w.c	Red oil, .826 s.g.
Mark II 40-250PA	10-0-250 Pa	Red oil, .826 s.g.
Mark II 41-2	.2-0-2.4 in w.c.	Blue oil, 1.91 s.g.
Mark II 41-60mm	0-60 mm w.c.	Blue oil, 1.91 s.g.
Mark II 41-600PA	20-0-600 Pa	Blue oil, 1.91 s.g.
Mark II 40-1-AV*	0-1.1 in w.c. & 0-4200 fpm	Red oil, .826 s.g.
Mark II 40-250PA-AV*	0-260 Pa & 0-21 mps	Red oil, .826 s.g.
Mark II 41-2-AV*	0-2.5 in wc. & 0-6300 fpm	Blue oil, 1.91 s.g.

Mark II Model 40-1 Dwyer Manometer Range .1-0-1.0 Inches W.C

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Air Filter Gage
Brand	Dwyer
Model Name/Number	MARK II MODEL 40-1
Scale Length	Approx. 8-1/4″ (21 cm)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Weight	1.04 lb (472 g)/1.23 lb (558 g)

Mark II Model 40-1 Dwyer Manometer Range .1-0-1.0 Inches w.c Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for Air Velocity and Air Filter Gage Applications. Capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:

Included with each
Mark II Manometer
are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Below are other pressure ranges available for Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 40-1	.1-0-1.0 in w.c.	Red oil, .826 s.g.
Mark II 40-25mm	0-26 mm w.c	Red oil, .826 s.g.
Mark II 40-250PA	10-0-250 Pa	Red oil, .826 s.g.
Mark II 41-2	.2-0-2.4 in w.c.	Blue oil, 1.91 s.g.
Mark II 41-60mm	0-60 mm w.c.	Blue oil, 1.91 s.g.
Mark II 41-600PA	20-0-600 Pa	Blue oil, 1.91 s.g.
Mark II 40-1-AV*	0-1.1 in w.c. & 0-4200 fpm	Red oil, .826 s.g.
Mark II 40-250PA-AV*	0-260 Pa & 0-21 mps	Red oil, .826 s.g.
Mark II 41-2-AV*	0-2.5 in wc. & 0-6300 fpm	Blue oil, 1.91 s.g.

Mark II Model 28 Dwyer Manometer Range 0-10,500 FPM

Minimum Order Quantity	1 Number
Model Name/Number	MARK II MODEL 28
Usage/Application	Laboratory
Accuracy	+-3% FS
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Material	Molded Plastic
Brand	Dwyer
Scale Length	Approx. 8-1/4″ (21 cm
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)

Mark II Model 28 Dwyer Manometer Range 0-10,500 fpm Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:

Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.

Below are other pressure ranges available for Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 25	0-3 in w.c.	Red oil, .826 s.g.
Mark II 26	0-7 in w.c.	Blue oil, 1.91 s.g.
Mark II 27*	0-7000 fpm	Red oil, .826 s.g.
Mark II 28*	0-10,500 fpm	Blue oil, 1.91 s.g.
Mark II MM-80	0-80 mm w.c.	Red oil, .826 s.g.
Mark II MM-180	0-180 mm w.c.	Blue oil, 1.91 s.g.
Mark II M-700PA	10-0-700 Pa	Red oil, .826 s.g.

Mark II Model 27 Dwyer Manometer Range 0-7000 FPM

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Air Filter Gage
Brand	Dwyer
Model Name/Number	MARK II MODEL 27
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm).

Mark II Model 27 Dwyer Manometer Range 0-7000 fpm Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.

Installation

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories

Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.

Below are other pressure ranges available for Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 25	0-3 in w.c.	Red oil, .826 s.g.
Mark II 26	0-7 in w.c.	Blue oil, 1.91 s.g.
Mark II 27*	0-7000 fpm	Red oil, .826 s.g.
Mark II 28*	0-10,500 fpm	Blue oil, 1.91 s.g.
Mark II MM-80	0-80 mm w.c.	Red oil, .826 s.g.
Mark II MM-180	0-180 mm w.c.	Blue oil, 1.91 s.g.
Mark II M-700PA	10-0-700 Pa	Red oil, .826 s.g.

Mark II Model 26 Dwyer Manometer Range 0-7 Inches WC

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Air Velocity Measurement
Brand	Dwyer
Model Name/Number	MARK II MODEL 26
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Scale Length	Approx. 8-1/4″ (21 cm)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)

Mark II Model 26 Dwyer Manometer Range 0-7 Inches WC Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction

Mark II manometers

are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:

Included with each Mark II manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.

Below Are Other Pressure Ranges Available For Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 25	0-3 in w.c.	Red oil, .826 s.g.
Mark II 26	0-7 in w.c.	Blue oil, 1.91 s.g.
Mark II 27*	0-7000 fpm	Red oil, .826 s.g.
Mark II 28*	0-10,500 fpm	Blue oil, 1.91 s.g.
Mark II MM-80	0-80 mm w.c.	Red oil, .826 s.g.
Mark II MM-180	0-180 mm w.c.	Blue oil, 1.91 s.g.
Mark II M-700PA	10-0-700 Pa	Red oil, .826 s.g.

Mark II Model 25 Dwyer Manometer Range 0-3 Inches WC

Material	Molded Plastic
Usage/Application	Air Velocity Measurement
Accuracy	+-3% FS
Model Name/Number	MARK II 25 SERIES MARK II
Brand	Dwyer USA
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Size	Approx 8-1/4 INCH 21 cm
I Deal In	New Only
Scale Length	Approx. 8-1/4″ (21 cm)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)

Mark II Model 25 Dwyer Manometer Range 0-3 Inches WC Dwyer Mark II Series Molded Manometers are of the inclined and inclined-Vertical Types. The Curved Inclined-Vertical Tube of the Model 25 Gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. Capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Construction:

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations, optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Moderate overpressures are accommodated by an overflow tank. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories:

Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8 feet of flexible double column plastic tubing. Portable operation is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the pressure connections to contain the gage oil in transit.

Below Are Other Pressure Ranges Available For Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 25	0-3 in w.c.	Red oil, .826 s.g.
Mark II 26	0-7 in w.c.	Blue oil, 1.91 s.g.
Mark II 27*	0-7000 fpm	Red oil, .826 s.g.
Mark II 28*	0-10,500 fpm	Blue oil, 1.91 s.g.
Mark II MM-80	0-80 mm w.c.	Red oil, .826 s.g.
Mark II MM-180	0-180 mm w.c.	Blue oil, 1.91 s.g.
Mark II M-700PA	10-0-700 Pa	Red oil, .826 s.g.

Mark II Dwyer Molded Plastic Manometer

Minimum Order Quantity	1 Number
Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Size	Approx 8-1/4 INCH 21 cm
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II Dwyer Molded Plastic Manometer Series Mark Iimolded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and Air Filter Gage applications. Both Gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Included with each Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 1 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8′ of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage fluid in transit. The Model 40 contains two 4-1/2′ lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps. Click here, if you require a Safety Data Sheet for the Blue Gage Fluid or the Red Gage Fluid.

Product Applications:

Paint Booths
Air Velocity Measurement
Air Filter Gage

Models & Ordering:

Model	Description
MARK II 25	Molded Plastic Manometer, Range 0-3″ w.c., Red Oil, .826 sp. gr.
MARK II 26	Molded Plastic Manometer,Rrange 0-7″ w.c., Blue Oil, 1.91 sp. gr.
MARK II 27	Molded Plastic Manometer, Range 0-7000 fpm, Red Oil, .826 sp. gr., Requires Pitot Tube *Sold Separately.
MARK II 28	Molded Plastic Manometer, Range 0-10,500 fpm, Blue Oil, 1.91 sp. gr., Requires Pitot Tube *Sold Separately.
MARK II 40-1	Molded Plastic Manometer, Range .1-0-1.0″ w.c., Red Oil, .826 sp. gr.
MARK II 40-1-AV	Molded Plastic Manometer, Range 0-1.1″ w.c. & 0-4200 FPM, Red Oil, .826 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 40-250PA	Molded Plastic Manometer, Range 10-0-250 Pa, Red Oil, .826 sp. gr.
MARK II 40-250PA-AV	Molded Plastic Manometer, Range 0-260 Pa & 0-21 MPS, Red Oil, .826 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 40-25MM	Molded Plastic Manometer, Range 0-26 mm w.c., Red Oil, .826 sp. gr.
MARK II 41-2	Molded Plastic Manometer, Range .2-0-2.4″ w.c., Blue Oil, 1.91 sp. gr.
MARK II 41-2-AV	Molded Plastic Manometer, Range 0-2.5″ w.c. & 0-6300 FPM, Blue Oil, 1.91 sp. gr., Requires Pitot Tube Sold Separately.
MARK II 41-600PA	Molded Plastic Manometer, Range 20-0-600 Pa, Blue Oil, 1.91 sp. gr.
MARK II 41-60MM	Molded Plastic Manometer, Range 0-60 MM W.C., Blue Oil, 1.91 sp. gr.
MARK II M-700PA	Molded Plastic Manometer, Range 10-0-700 Pa, Red Oil, .826 sp. gr.
MARK II MM-180	Molded Plastic Manometer, Range 0-180 MM W.C., Blue Oil, 1.91 sp. gr.
MARK II MM-80	Molded Plastic Manometer, Range 0-80 MM W.C., Red Oil, .826 sp. gr.

Mark II Model 40-250PA Dwyer Manometer Range 10-0-250 Pa

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Model Name/Number	MARK II MODEL 40-250PA
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II Model 40-250PA Dwyer Manometer Range 10-0-250 Pa Dwyer Mark II Series Molded Manometers are of the inclined and inclined-vertical types. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. Also, it is ideally suited for air velocity and air filter gage applications. Capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Construction

Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. The portable stand is a standard feature on Model 40. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof “O” ring seals. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.

Installation:

Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

Accessories

Included with each

Mark II Manometer are two tubing connectors for 1/8″ pipe or sheet metal ducts, two mounting screws, 3/4 ounce bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 40 contains two 4-1/2 foot lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Below are other pressure ranges available for Series Mark II Manometer:

Model	Range	Fluid Used
Mark II 40-1	.1-0-1.0 in w.c.	Red oil, .826 s.g.
Mark II 40-25mm	0-26 mm w.c	Red oil, .826 s.g.
Mark II 40-250PA	10-0-250 Pa	Red oil, .826 s.g.
Mark II 41-2	.2-0-2.4 in w.c.	Blue oil, 1.91 s.g.
Mark II 41-60mm	0-60 mm w.c.	Blue oil, 1.91 s.g.
Mark II 41-600PA	20-0-600 Pa	Blue oil, 1.91 s.g.
Mark II 40-1-AV*	0-1.1 in w.c. & 0-4200 fpm	Red oil, .826 s.g.
Mark II 40-250PA-AV*	0-260 Pa & 0-21 mps	Red oil, .826 s.g.
Mark II 41-2-AV*	0-2.5 in wc. & 0-6300 fpm	Blue oil, 1.91 s.g.

Mark II Model 40-250PA-AV Dwyer Manometer Range 0-250 Pa,0-21 mps

Minimum Order Quantity	1 Number
Material	Molded Plastic
Accuracy	+-3% FS
Model Name/Number	MARK II MODEL 40-250PA-AV
Brand	Dwyer USA
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II Model 40-250PA-AV Dwyer Manometer Range 0-250 Pa,0-21 mps
Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:

Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
Requires Pitot Tube, Not Included

Applications:

Air Velocity
Air Filter Guge

Other Details:

The Dwyer MARKII40250PAAV Molded Plastic Inclined Manometer, 0-260 Pa, 0-21 mps, Red Gauge Fluid, Requires Pitot Tube Provides Linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure measurements above and below atmospheric as well as differential pressure measurements. The MARK II 40-250PA-AV includes accessories to enable portable use of the unit.

Included:

2 – Tubing connectors for 1/8 in. pipe or sheet metal ducts
2 – Mounting screws
2 – 4-1/2” lengths of clear plastic tubing
1 – Plastic swing-out stand
1 – Leveling screw
1 – 1 ounce bottle of indicating fluid
1 – Set of red and green pointer flags
1 – User Manual

Mark II Model 40-25MM Dwyer Manometer Range 0-26 MM W.C

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Model Name/Number	MARK II MODEL 40-25MM
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)

Mark II Model 40-25MM Dwyer Manometer Range 0-26 MM W.C Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:

Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
Requires Pitot Tube, Not Included

Applications:

Air Velocity
Air Filter Guge

Other Details:

The Dwyer MARKII40255MM Molded Plastic Inclined Manometer, 0-26 mm w.c., Red Gauge Fluid Provides linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements. The MARK II 40-255MM includes Accessories to Enable Portable Use of The Unit

Included:

2 – Tubing connectors for 1/8 in. Pipe or Sheet Metal Ducts
2 – Mounting Screws
2 – 4-1/2” lengths of clear plastic Tubing
1 – Plastic Swing-Out Stand
1 – Leveling Screw
1 – 1 ounce bottle of indicating fluid
1 – Set of red and green pointer flags
1 – User Manual

Mark II Model 41-2 Dwyer Manometer Range .2-0-2.4 Inches

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Air Velocity Measurement
Model Name/Number	MARK II MODEL 41-2
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II Model 41-2 Dwyer Manometer Range .2-0-2.4 Inches Dwyer A-489 SS Straight Static Pressure Tip With Flange, 4″ (101 MM) Insertion Depth

Key Features:

Rapid Shutoff Pressure Connections and Integral Overpressure Safety Traps
Requires Pitot Tube, Not Included

Applications:

Air Velocity
Air Filter Guge

Other Details:

The Dwyer MARKII412 Molded Plastic Inclined Manometer, .2-0-2.4 INCHES., Blue Gauge Fluid Provides linear Calibration and Excellent Resolution Throughout its Range. This model is capable of pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements. The MARK II 412 includes Accessories to Enable Portable Use of The Unit

Included:

2 – Tubing connectors for 1/8 in. Pipe or Sheet Metal Ducts
2 – Mounting Screws
2 – 4-1/2” lengths of clear plastic Tubing
1 – Plastic Swing-Out Stand
1 – Leveling Screw
1 – 1 ounce bottle of indicating fluid
1 – Set of red and green pointer flags
1 – User Manual

Mark II Model 41-2-AV Dwyer Manometer 0-2.5 inch W.C

Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Model Name/Number	MARK II MODEL 41-2-AV
Scale Length	Approx. 8-1/4″ (21 cm)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Weight	1.04 lb (472 g)/1.23 lb (558 g)

Mark II Model 41-2-AV Dwyer Manometer 0-2.5 inch w.c The Dwyer Mark II Series provides linear calibration and excellent resolution throughout its range and is ideally suited for air velocity and air filter gage Applications.

Mark II Model 41-600PA Dwyer Manometer 20-0-600 Pa

Minimum Order Quantity	1 Number
Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Model Name/Number	MARK II MODEL 41-600PA
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II Model 41-600PA Dwyer Manometer 20-0-600 Pa

Dwyer MARK II 41-600PA Inclined Manometer (20-0-600 Pa) using Blue Gauge Fluid
Model: MARK II 41-600PA | Order No: 41-600PA

Designed to Give Fast, Accurate Indication of Differential Pressures. The Gage May be used as a Readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure.

Dwyer 41-600pa Manometer, Air Filter Gauge, 0-1

There are no moving parts – no mechanical linkages – nothing to wear out, jam or deteriorate from vibration.
They never need calibration.
2 psi max. Pressure.
The mirror polished inclined scale allows the operator to easily read minute differences in differential pressure across the filter accurately without parallax error.
Over pressure safety traps

Specifications:

For Architects and Engineers
An Air Filter Gage for measuring the resistance to Air Flow through the filters shall be installed, one for each bank of filters. The gage shall be of inclined tube Differential Type (equipped with vent valves for zeroing) shall be of solid acrylic plastic construction with built-in level vial, shall have an adjustable mirror-polished scale, shall be furnished complete with two 5-foot lengths 1/4″ tubing, two static pressure tips, mounting hardware, additional bottle of Red Gage oil and instructions.

What”s Included With The Dwyer MARK II 41-600PA

Dwyer MARK II 41-600PA Inclined Manometer (20-0-600 Pa) Using Blue Gauge Fluid

Mark II Model 41-60MM Dwyer Manometer 0-60 MM

Minimum Order Quantity	1 Number
Material	Molded Plastic
Accuracy	+-3% FS
Usage/Application	Paint Booths
Brand	Dwyer
Model Name/Number	MARK II MODEL 41-60MM
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm).

Mark II Model 41-60MM Dwyer Manometer 0-60 MM Dwyer MARK II 41-60MM Molded Plastic Inclined Manometer, 0-60 mm w.c., Blue Gauge Fluid

Product Features:

Range: 0-60 mm w.c.
Blue Gauge Fluid
Accuracy: ±3% FS
Pressure Limits:15 psi (100 kPa)
Rapid Shutoff Pressure Connections and integral overpressure safety Traps

Applications:

Air Velocity
Air Filter Gauge

The Dwyer MARKII4160MM Molded Plastic Inclined Manometer, 0-60 mm w.c., Blue Gauge Fluid provides linear calibration and excellent resolution throughout its range. This model is capable of pressure measurements above and below atmospheric as well as differential pressure measurements. The MARK II 41-60MM includes accessories to enable portable use of the unit.

2 – Tubing connectors for 1/8 in. pipe or sheet metal ducts
2 – Mounting screws
2 – 4-1/2” lengths of clear plastic tubing
1 – Plastic swing-out stand
1 – Leveling screw
1 – 1 ounce bottle of indicating fluid
1 – Set of red and green pointer flags
1 – User Manual

Model -A-489 Dwyer A-489 SS Straight Static Pressure Tip with Flange, 4″ (101 mm) Insertion Depth

Mark II M – 700Pa Dwyer Manometer 10-0-700 Pa

Minimum Order Quantity	1 Number
Measuring Range	10-0-700 PA
Accuracy	3%
Material	Molded Plastic
Usage/Application	Paint Booths
Model Name/Number	MARK II M – 700PA
Brand	Dwyer
Weight	250 g

Mark II M – 700Pa Dwyer Manometer 10-0-700 Pa

Dwyer MARK II M-700PA Inclined/Vertical Manometer (10-0-700Pa) Using Red Gauge Oil
Model: MARK II M-700PA

Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple with Virtually indestructible Molded white Styrene-Acrylonitrile Housing, indicating tube and fluid wells, Molded ABS Knobs and Zero adjust plunger, shock Mounted Glass level vial and Leak Proof “O” Ring Seals.

Description:

Dwyer MARK II M-700PA Molded Plastic Manometer, Range 10-0-700 Pa
The Dwyer Mark II M-700PA Molded Plastic Manometer has a Range of 10-0-700 Pa, Red Oil, .829 sp. gr.

Dwyer® Mark II Series Molded Manometers are of the inclined and inclined-Vertical Types. The curved inclined-vertical Tube of the Model 25 gage provides higher Ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter gage Applications. Both Gage Types are Capable of Pressure Measurements above and below Atmospheric as well as Differential Pressure Measurements.

Included:

What”s included With the Dwyer MARK II M-700PA
Dwyer MARK II M-700PA Inclined/Vertical Manometer (10-0-700Pa) Using Red Gauge Oil

Mark II MM-180 Dwyer Manometer 0-180 MM W.C

Minimum Order Quantity	1 Number
Accuracy	+-3% FS
Brand	Dwyer
Model Name/Number	MARK II MM-180
Weight	1.04 lb (472 g)/1.23 lb (558 g)
Temperature Limits	140 deg F (60 deg C)/150 deg F (65 deg C)
Pressure Limits	10 psi (70 kPa)/15 psi (100 kPa)
Scale Length	Approx. 8-1/4″ (21 cm)

Mark II MM-180 Dwyer Manometer 0-180 MM W.C

Dwyer Mark II MM-180 Inclined/Vertical Manometer (0-180mm w.c.) Using Blue Gauge Oil
Model: MARK II MM-180

Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple with Virtually indestructible Molded white Styrene-Acrylonitrile Housing, indicating tube and fluid wells, Molded ABS Knobs and Zero adjust plunger, shock Mounted Glass level vial and Leak Proof “O” Ring Seals.

Description:

Dwyer MARK II MM-180 Molded Plastic Manometer 0-180 mm w.c.
The Dwyer Mark II MM-180 Molded Plastic Manometer Has a Range of 0-180 mm w.c., Blue Oil, 1.91 sp. gr.

Dwyer® Mark II Series Molded Manometers are of the inclined and Inclined-Vertical Types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter Gage Applications. Both gage types are capable of pressure measurements above and below atmospheric as well as Differential Pressure Measurements.

Included:

What”s Included With The Dwyer MARK II MM-180
Dwyer Mark II MM-180 Inclined/Vertical Manometer (0-180mm w.c.) Using Blue Gauge Oil

Mark II MM-80 Dwyer Manometer 0-80 MM W.C

Minimum Order Quantity	1 Piece
Material	Molded Plastic
Accuracy	3%
Usage/Application	Paint Booths
Pressure Range	0-80 MM W.C
Brand	Dwyer
Model Name/Number	MARK II MM-80
Weight	250 f

Mark II MM-80 Dwyer Manometer 0-80 MM W.C

Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) using Red Gauge OilModel: MARK II MM-80

Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) Using Red Gauge Oil
Model: MARK II MM-80

Construction – Mark II Manometers are Economically Priced, Compact and Available in Both Stationary and Portable Configurations. Construction is Simple With Virtually Indestructible Molded White Styrene-Acrylonitrile Housing, Indicating Tube and Fluid Wells, Molded ABS Knobs and Zero Adjust Plunger, Shock Mounted Glass level vial and Leak Proof “O” Ring Seals.

Description:

Dwyer MARK II MM-80 Molded Plastic Manometer, 0-80 mm w.c.
The Dwyer Mark II MM-80 Molded Plastic Manomater has a range of 0-80 mm w.c., red oit, .829 sp. gr.

Dwyer® Mark II Series Molded Manometers are of The Inclined and Inclined-Vertical Types. The curved inclined-vertical tube of the Model 25 Gage Provides Higher Ranges with More Easily Read increments at low readings. The Model 25 is excellent for General Purpose work. The Model 40 inclined Gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for Air Velocity and Air Filter Gage Applications. Both gage Types Are Capable of Pressure Measurements above and below atmospheric as well as Differential Pressure Measurements.

What”s included with the Dwyer MARK II MM-80

Dwyer Mark II MM-80 Inclined/Vertical Manometer (0-80mm w.c.) Using Red Gauge Oil

E-mail us

India

Huba 511.915003841 Pressure Transmitter 0 – 4 bar

Huba 511.917003571 Pressure Transmitter 0 – 6 bar

Huba 511.930003842 Pressure Transmitter 0 – 10 bar

Huba 511.930007041 Pressure Transmitter 0 – 10 Bar

Huba 511.932003842 Pressure Transmitter 0 – 25 bar

Huba 511.940003842 Pressure Transmitter 0 – 60 Bar

Huba 511.941003842 Pressure Transmitter 0 – 100 bar

1900 Dwyer Series Compact Low Differential Pressure Switches

1900-00 Dwyer Series Compact Low Differential Pressure Switch Range 0.07-0.15

1900-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55

1900-1 Dwyer Series Compact Low Differential Pressure Switch Range 0.40-1.6″ W.C

1900-5 Dwyer Series Compact Low Differential Pressure Switch Range 1.40-5.5

1900-10 Dwyer Series Compact Low Differential Pressure Switch Range 3.0-11.75

1920-10 Dwyer Series Compact Low Differential Pressure Switch Range 4.0-20.0

1910-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55

Dps Duct Kit

Static Pressure Tip

Grey Static Pressure Tip

Dwyer Plastic Static Pressure Tip

Plastic Static Pressure Tip

ABS Static Pressure Tip

A-480 DWYER Plastic Static Pressure Tip

DPS Differential Air Pressure Kit

Duct Fixing Kit

Duct Connection Set

Dwyer 1620 Series Single and Dual Pressure Switches

Dwyer 1627-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c.

Dwyer 1627-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c

Dwyer 1627-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c

Dwyer 1627-05 Series 16220 Single and Dual Pressure Switch Range .5-6.0

Dwyer 1626-1 Series 1620 Single and Dual Pressure Switch Range – .15-1.5″ w.c.

Dwyer 1626-10 Series 1620 Single and Dual Pressure Switch Range 2.0-11″ w.c

Dwyer 1626-20 Series 1620 Single and Dual Pressure Switch Range 8.0-24″ w.c

Dwyer 1626-05 Series 1620 Single and Dual Pressure Switch Range .5-6.0″ w.c

RHP-2D10 DWYER Humidity Temperature Transmitter

RHP-2D1B DWYER Humidity Temperature Transmitter

RHP-3D11 DWYER Humidity Temperature Transmitter

RHP-3S22 DWYER Humidity Temperature Transmitter

RHP-2D22 DWYER Humidity Temperature Transmitter

RHP-3O22 DWYER Humidity Temperature Transmitter

DWYER Series RHP Humidity Temperature Transmitter

Series 2-5000 Minihelic II Differential Pressure Gauge

Dwyer 2-5000-25MM Minihelic II Differnntial Pressure Gauge 0 – 25 MM WC

Dwyer 2-5000-50MM Minihelic II Differential Pressure Gauge 0-50 MM WC

Dwyer 2-5000-100MM Minihelic II Differential Pressure Gauge 0-100 MM WC

Dwyer 2-5000-125PA Minihelic II Differential Pressure Gauge 0-125 Pa

Dwyer 2-5000-250PA Minihelic II Differential Pressure Gauge 0-250 Pa

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa

Dwyer 2-5000-1KPA Minihelic II Differential Pressure Gauge 0-1 KPA

Dwyer 2-5000-3KPA Minihelic II Differential Pressure Gauge 0-3 KPA

Dwyer 2-5205-5PSI Minihelic II Differential Pressure Gauge 0-5 PSI

Dwyer 2-5000-0 Minihelic II Differential Pressure Gauge 0-0.5 INCH

Sensocon Series 251-04 Wet Differential Pressure Transmitter

Sensocon Series 251-05 Wet Differential Pressure Transmitter

Sensocon Series 251-01 Wet Differential Pressure Transmitter

Sensocon Series 251-02 Wet Differential Pressure Transmitter

Sensocon Series 251-08 Wet Differential Pressure Transmitter

Sensocon Series 251-07 Wet Differential Pressure Transmitter

Sensocon Series 251-06 Wet Differential Pressure Transmitter

Sensocon Series 251-03 Wet Differential Pressure Transmitter

Series 251 Wet Differential Pressure Transmitter

Setra Model 265 Differential Pressure Transducer Range 0- 50 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 25 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 10 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 2.5 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 1 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 0.5 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 25 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 50 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 5 Inch

Setra Model 265 Differential Pressure Transducer

Setra Model 265 Differential Pressure Transducer Range 0- 1000 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 100 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 100 Inch

Setra Model 265 Differential Pressure Transducer Range 0- 500 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 250 Pac

Setra Model 265 Differential Pressure Transducer Range 0- 0.25 Inch

Mark II Model 40-1-AV Dwyer Manometer Range 0-1.1 Inches w.c