admin

Hu Tek CeLPad Thailand Wholesaler India

Hutek Air Washers Cellulose Pads

Minimum Order Quantity	100 Square Feet
Usage/Application	Air Wesher
Color	Green Brown
Width	600 MM
Brand	Hu Tek Thailand
Cooler Body Material	Paper
Weight	5 kg

Hutek Air Washers Cellulose Pads The More Effective Solution For Evaporative Cooling and Humidification. Very Hot and Very Dry Climates Could have Devastating Effects on Productivity of livestock Productivity, Plants, and Humans. Evaporative cooling has proven to be one of the most reliable and economical methods to maintain optimum Temperature and Humidity. CeLPad is what you need for your evaporative cooling system to perform effectively and economically. When hot and dry air is induced through the wet CeLPad , it will be cooled down and humidified. Our long experience in designing evaporative systems ensures that CeLPad can make Evaporative Systems simpler and more efficient for you. Do not hesitate to contact us or your local distributor for more details.

CeLPad Has Two Basic Configurations

CeLPad 0760 (45/15 Flute Angle Configuration): Designed for minimizing pressure drop from the cooling pad. Suitable for the design with high air face velocity.
CeLPad 0790 (45/45 flute angle configuration): Designed for maximizing the evaporation efficiency by creating more contact time between air and water to allow for better Evaporation. Suitable for Typical Application With a moderate air face velocity Design Such as poultry, and greenhouses.
CeLPad Can Be Easily Installed Using Pad Plus , a Complete Frame System .

The CeLPad Advantages:

Maximum Efficiency : CeLPad is Designed to Provide Maximum Contact Surface Between Air and Water (approximately 460 m2/m3). Such massive surface enables an optimum Cooling and Humidification Effect From Evaporation.
Maximum Freshness : CeLPad acts as a Natural Filter That Purifies Inlet air. Carefully designed flute angle directs water towards both the air inlet and outlet side; the water then intrinsically flushes away dust, algae, and mineral build up on the evaporation surfaces.
Maximum Durability : CeLPad is made of special cellulose paper impregnated with insoluble chemical compounds to preserve its long working life in your system.
Maximum Toughness : CeLPad, with proper water bleed-off and regular brushing, can be used in imperfect water and air condition.

Temperature reduction during the day by CeLPad System(Tropical Area)

CeLPad Applications:

Livestock Farm: Poultry, Beef, Dairy, Swine.
Planting: Growing Crops, Greenhouse.
Pre-cooling & Spot Cooling: Industrial Application, Gas turbine, Residential & Commercial Building, Supermarket, etc.
Humidification: Spray Painting Booth, Industrial Application, Commercial Building.

Hutek Cel Pad Nano Xtreme

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Type Of Parts	Air Wesher Cooling Pad
Color	Blue Brown
Width	600 MM
Brand	Hu Tek Thailand
Cooler Body Material	Paper
Weight	5 kg

Hutek Cel Pad Nano Xtreme Evaporative Cooling System Celpad

Nano Xtreme:

The More Hygienic And Longer-Lasting Cooling Pad

Advantages:

Virus Inactivation
Anti Microbial
Mold Prevention
Anti Scaling
Anti Algae
Extended Life

CeLPad Nano:

Tested Against Spectrum Of Over 800 Types Of Bacteria, Molds, Algae, Viruses Including 60 Kinds Of Germs.
Active Nano Agents That Act Against Several Type Of Germ, Fungi,And Bacteria.
Enhance Hygienic Property Of Inlet Air.

CeLPad Xtreme:

White Area Represents Calcium Formation On Evaporation Surface.
R&D Collaboration With Nano Tec
Slow-Down Calcium Built Up On Evaporation Surface.
Better Long-Term Cooling And Less Long-Term Energy Consumption.

HuTek Cel Pad Nano

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Type Of Parts	Air Wesher Cooling Pad
Color	Blue Brown
Width	600 MM
Brand	Hu Tek Thailand
Cooler Body Material	Paper
Weight	5 kg

HuTek Cel Pad Nano, Evaporative Cooling System Celpad

Nano Xtreme:

The More Hygienic And Longer-Lasting Cooling Pad

Advantages:

Virus Inactivation
Anti Microbial
Mold Prevention
Anti Scaling
Anti Algae
Extended Life

CeLPad Nano:

Tested Against Spectrum Of Over 800 Types Of Bacteria, Molds, Algae, Viruses Including 60 Kinds Of Germs.
Active Nano Agents That Act Against Several Type Of Germ, Fungi,And Bacteria.
Enhance Hygienic Property Of Inlet Air.

CeLPad Xtreme:

White Area Represents Calcium Formation On Evaporation Surface.
R&D Collaboration With NANO TEC
Slow-Down Calcium Built Up On Evaporation Surface.
Better Long-Term Cooling And Less Long-Term Energy Consumption.

HuTek Cel Pad Xtreme

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Type Of Parts	Air Wesher Cooling Pad
Color	Blue Brown
Width	600 MM
Brand	Hu Tek Thailand
Cooler Body Material	Paper
Weight	6 kg

HuTek Cel Pad Xtreme, Evaporative Cooling System Celpad

Nano Xtreme

The More Hygienic And Longer-Lasting Cooling Pad

Advantages:

Virus Inactivation
Anti Microbial
Mold Prevention
Anti Scaling
Anti Algae
Extended Life

CeLPad Nano:

Tested Against Spectrum Of Over 800 Types Of Bacteria, Molds, Algae, Viruses Including 60 Kinds Of Germs.
Active Nano Agents That Act Against Several Type Of Germ, Fungi,And Bacteria.
Enhance Hygienic Property Of Inlet Air.

CeLPad Xtreme:

White Area Represents Calcium Formation On Evaporation Surface.
R&D Collaboration With NANO TEC
Slow-Down Calcium Built Up On Evaporation Surface.
Better Long-Term Cooling And Less Long-Term Energy Consumption.

HuTek Cel Pad Green Brown

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Color	Green Brown
Width	600 MM
Brand	Hu Tek Thailand
Cooler Body Material	Paper
Weight	6 kg

HuTek Cel Pad Green Brown Celdek 7090 Evaporative Cooling Pad is Used in Systems Where High Efficiency Cooling is Required. It can be Used For Many Different Cooling Purposes But is Particularly Suitable For Cooling Of Live Stock Buildings And Green Houses.

Features.

High Evaporation Efficiency.
Superb Wetting Propertie.
Low-Pressure Drop When Wet, Leading To Lower Operating Cost.
No Water Carry-Over.
Low Scaling.
Self-Cleaning.
Strong And Self-Supporting.
Long Lifetime.
Low Running Cost.
Quick And Easy To Install.
Environmentally Friendly.
Consistent High Quality.

Celdek 7090-15 Hu Tek

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	Hu Tek Thailand
Weight	3 kg

Nano Xtreme:

The More Hygienic And Longer-Lasting Cooling Pad

Advantages:

Virus Inactivation
Anti Microbial
Mold Prevention
Anti Scaling
Anti Algae
Extended Life

CeLPad Nano:

Tested Against Spectrum Of Over 800 Types Of Bacteria, Molds, Algae, Viruses Including 60 Kinds Of Germs.
Active Nano Agents That Act Against Several Type Of Germ, Fungi,And Bacteria.
Enhance Hygienic Property Of Inlet Air.

CeLPad Xtreme:

White Area Represents Calcium Formation On Evaporation Surface.
R&D Collaboration With Nano Tec
Slow-Down Calcium Built Up On Evaporation Surface.
Better Long-Term Cooling And Less Long-Term Energy Consumption.

Celpad 7090-15 Hu Tek Asia

Minimum Order Quantity	300 Square Feet
Usage/Application	Air Wesher
Type Of Parts	Paper
Color	Brown
Width	600 mm
Brand	Hu Tek Thailand
Weight	3 kg
Country of Origin	Made in India

Celpad 7090-15 Hu Tek Asia, Evaporative Cooling System Celpad

Nano Xtreme:

The More Hygienic And Longer-Lasting Cooling Pad

Advantages:

Virus Inactivation
Anti Microbial
Mold Prevention
Anti Scaling
Anti Algae
Extended Life

CeLPad Nano:

Tested Against Spectrum Of Over 800 Types Of Bacteria, Molds, Algae, Viruses Including 60 Kinds Of Germs.
Active Nano Agents That Act Against Several Type Of Germ, Fungi,And Bacteria.
Enhance Hygienic Property Of Inlet Air.

CeLPad Xtreme

White Area Represents Calcium Formation On Evaporation Surface.
R&D Collaboration With NANO TEC
Slow-Down Calcium Built Up On Evaporation Surface.
Better Long-Term Cooling And Less Long-Term Energy Consumption

Flexible Ducts Wholesale Suppliers India

Flexible Ducts

Minimum Order Quantity	100 Number
Material	Aluminium
Color	Silver
Shape	Round
Diameter	4″ to 20″
Length	25 ft
Material Thickness	0.08~0.12 mm
Application	Air Conditioning Ventilation System

We are into offering Flexible Ducts. These Flexible Ducts give high performance along with trouble free functioning has made our range a requisite requirement for various industries. These Flexible Ducts are used for the purpose of controlling angular position. Renowned for their durability, these Flexible Ducts are equipped with motor, control mechanism, high quality components which combine together to improve their overall performance.

Features:

Quality specification
Fully tested
Trouble free performance

Decorative Ducts

Minimum Order Quantity	100 Number
Shape	Round
Material	Aluminium
Length	25 ft
Max. Permissible Velocity	5000 fpm
Max Recommended Working Pressure	8″ wg
Temperature Range	32deg-200deg F
Insulation Thickness	25 mm
Insulation Density	16 kg/ m3
Insulation R- Value	4.2 (degF – Ft2 – hr/Btu)

Decorative Ducts are newest type of ducts made of colored polyester covering on aluminum or OPP (on demand) and high steel wire. Suitable for interior like Auditorium, Restaurant, Banquet Halls and Shops, etc. insulated as well as un-insulated ducts are available.

Aluminium Ducts

Minimum Order Quantity	100 Number
Usage/Application	Ventilation
Shape	Round
Color	Silver
Features	Fire resistant
Diameter	4″ to 18″
Length	10 ft

Our Aluminium Ducts are manufactured from premium grade aluminium and offered to the clients in various sizes. These find application in air conditioners, exhausts and ducts, due to which these are highly demanded in the domestic market. We only deliver quality-tested products that are heat resistant, leak proof, flexible, durable and exhibit excellent ductility.

Chimney Ducts Pipe

Minimum Order Quantity	100 Number
Length of Pipe	6 m
Usage/Application	Air Conditioning Ventilation System
Color	Silver
Material	Aluminum
Feature	Fire resistant
Shape	Round

Transferring hot air and chemicals through a fireplace flue is heavy-duty work.The use of improper Chimney Ducts Pipe can lead to complications such as fire hazards, structural damage to the Chimney, and hazardous materials and fumes coming back into the building To handle the high temperature operating conditions, we recommend using heat resistant a stainless steel or an aluminum Chimney Ducts. At ENVIRO TECH, we have multiple Flexible Chimney Pipe options to provide you with the necessary tools for safe and effective operation.Corrosion is a serious issue that significantly reduces the lifespan of a fireplace flue. Fortunately, stainless steel and aluminum resist corrosion damage caused by moisture, chemicals, and fumes.Our stainless steel Chimney Ducts are an excellent long-term investment because they are resistant to chemicals and materials that would cause severe damage to clay and brick Chimney Ducts Along with great resistance to corrosive materials, the stainless steel construction of some our hose materials is heat resistant up to 1650 degrees Fahrenheit.

Aluminum Ducting Pipe

Minimum Order Quantity	100 Number
Surface Finish	Anodized
Shape	Round
Material	Aluminum
Color	Silver
Feature	Fire resistant
Length	3 mtr

We are offering Aluminum Ducting Pipe to our client.

Features:

Accurate dimensions
Longer service life
Low maintenance

Flexible Aluminum Ducting Hose

Minimum Order Quantity	100 Number
Material	Aluminum
Usage/Application	Air Conditioning Ventilation System
Length	25 ft
Color	Silver
Diameter	4″ to 20″
Feature	Fire resistant

With rich expertise, we offer our clients a wide range of Flexible Aluminum Ducting Hose which is constructed using special aluminum alloy. These prevents our product from corrosion and metal fatigue. The fabrication of our machines help us in producing a continuous lock seam. This allows the duct to be pulled open, compressed, bent and re-bent without any leakage. Further, these results in not being dry rot when heat aged. These can be installed with severe bends. Apart from this, these can also be installed in unlimited lengths while maintaining an unrestricted diameter. Our range is conveniently boxed in 5 foot, 10 foot and 15 foot lengths. It is compressed to nearly 3 times its original length. This ensures convenient shipping and handling.

Applications:

Heating air Conditioning
Exhausting
Fresh Air Intakes
Ideal for use in clothes dryer, bathroom and kitchen exhausts

Benefits:

Totally non-combustible Maximum operating temperature 435ºF
Can be bent into any configuration No need for elbows
Near zero permeability and leakage Reduces energy loss
Will not sag between 6 foot supports Easy installation

Specifications:

Performance Data
Flame Spread	Zero
Smoke Developed	Zero
Temperature Range	100°F to 435°F
Maximum Velocity	5000FPM
3″ to 10″ Diameter
Static Pressure – positive	12” W.G.
Static Pressure – negative	12” W.G.
12″ to 20″ Diameter
Static Pressure – positive	8” W.G.
Static Pressure – negative	8” W.G.
Permeance	Near Zero
Max. Installed Length	No Limit
Product Range
Diameters (inches)	3 4 5 6 8 10 12 14 16 18 20
Standard Length (Feet)	5 10 15

Features:

Easy to use
Durability quality
Corrosion resistance

Air Ducts

Minimum Order Quantity	12 Number
Material	Aluminum
Usage/Application	Air Conditioning Ventilation System
Shape	Round
Color	Silver
Diameter	4″ to 20″
Length	25 ft

Being the leading names in the industry, we are into offering a comprehensive range of Air Ducts that are available in varied dimensions and sizes. This Air Ducts is installed in carding and comber machines, blowers, washing machines and is acclaimed for exceptional fishing and durable standards. These are light in weight and are available with standard lengths. Moreover, we offer Air Ducts with customized solutions.

Features:

Easy installation
Corrosion resistance
Light weight

Aluminum Hose

Minimum Order Quantity	100 Number
Material	Aluminum
Length	5 mtr
Color	Silver
Shape	Round
Feature	Fire resistant

Specifications:

Ideal for ventilation & air conditioning system
High quality for Indian market

Materials:

Semi-rigid aluminum, high flexibility and axial compressibility, 0.11mm thickness or as request

Applications:

Low/Medium pressure central HVAC systems and ventilation systems
Recommended for Industrial Air Movement and Fume Control Applications; Abrasion Resistant;A/C Ventilation ;Chemical Fumes;Confined Space Ventilation ;Fume Exhaust;Garage Exhaust ;High Temperature Applications ;Pollution Control ;Ventilation

Aluminum Flexible Duct Pipe

Minimum Order Quantity	100 Number
Usage/Application	Ventilation
Surface Finish	Anodized
Shape	Round
Thickness	0.08~1 mm
Material	Aluminum
Feature	Fire resistant
Size	4″

Aluminium foil and fabric hose is used for Exhaust air ventilation, electrical component manufacture, manufacture. … Aluminium Kitchen Chimney Hose …

Hydraulic FILTER Manufacturer INDIA

Putzmeister Pump Hydraulic Oil Filer Elements

Minimum Order Quantity	12 No
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Usage/Application	Oil Filter
Filter Medium Material	Fiberglass
Material	Stainless Steel
Automation Grade	Manual
Packaging Type	1

Putzmeister Pump Hydraulic Oil Filer Elements

Owing To Our Rich Industrial Experience And Expertise, We Are Engaged In Exporting, Manufacturing And Supplying An Excellent Quality Collection of Putzmeister Hydraulic Oil Filter INDIA DELHI

Construction: Cartridge
Material: Glass Fiber
Filtration Rating: 1-100um
Working Temperature: -30a -110a
Working Pressure: 30-210bar
Working Life(month): 8-12
Filtration Efficiency: 99%
O-Ring Material: Viton, NBR
Working Medium: hydraulic oil,lubricating oil,water and oil
Application: Metallurgy Industry, Electronic Industry, Pharmaceutical Industry, Petroleum Gasification, Thermal Power, Nuclear Power, etc.

Hydraulic & Lubracation Oil Filter

Minimum Order Quantity	1 No
Material	SS 304
Filter Media	Glass Fibre Filtering Media,Stainless steel wire mesh filter media
Usage/Application	Engine Oil
Compressor Type	Air
Brand	Enviro Tech Industrial Products
Color	WHITE
Country of Origin	Made in India

Hydraulic & Lubracation Oil Filter

Hydraulic Filters Are Used Anywhere In A Hydraulic System Particle Contamination Is To Be Removed. The Return Line Filter Traps Particles As They Enter The Reservoir, Providing Clean Fluid For Reintroduction Into The System. We Are Offering Pressure Line Filter That Is Designed To Bear Pressure Up To The Range Of 210 Bar Or Even More. We Have a Excellent Range of Hydraulic and Lubrication Oil Filter That Include Pressure Line Filter, Return Line Filter, Hydraulic Filter, Compressor Oil Filter and Strainer Filter.
Features
TECHNICAL SPECIFICATIONS
– High Filtration Area- Low Pressure Drop- High Contamination Retention Capacity
Following Are The Medias Used For Hydraulic And Lube Oil Filtration
1.Glass Fibre Filtering MediaUsed For Mineral Oils, Hydraulic Oils And Lubrication OilsAbsolute FiltrationHigher Dirt Hold Capability
2. Paper Filtering Media- Made Up Of Paper And Cellulose- High Material Stability And Strength
3. Stainless Steel Wire Mesh Filter Media- Provides Nominal Filtration Area- Provides High Resistance With Longer Filter Life And Also Cleanable Partially
Types Of Filters- Pressure Line Filters- Return Line Filters- Strainer Filters- Hydraulic Filters- Compressor Oil Filters
APPLICATIONS
Engine Oil- Transmission Oil- Lubricating Oil- Hydraulic Oil

Semi Automatic Hydraulic Filter

Minimum Order Quantity	12 No
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS.
Filter Type	Suction Filters
Material	SS 304
Usage/Application	Industrial
Product Type	Semi Automatic Hydraulic Filter
Color	SELVER
Filter Medium Material	Metal
Automation Grade	Manual
Packaging Type	1
Item Code	Semi Automatic Hydraulic Filter
Is It Washable	Non Washable
I Deal In	New Only
Country of Origin	Made in India

Semi Automatic Hydraulic Filter

We Are An Acclaimed Name Occupied In Offering a Superior Quality Range Of Return And Pressure Line Hydraulic Filter. Offered hydraulic Filter Is Very Much Demanded In Varied Industries. Provided Hydraulic Filter Is Made Available In Numerous Sizes And Other Specifications To Meet Clients’ Various Requirements. In Addition To This, Our Precious Customers Can Purchase This Quality Assured Hydraulic Filter From Us At Affordable Prices.
Features:

Excellent Filtration
Hassle Free Installation
Longer Working Life Price Range: Rs. 800 to 15000 (Per Piece)

Hydraulic Oil Filter For Pressure Line Filter Cartridge

Minimum Order Quantity	12 Number
Material	SS 304
Filter Media	Stainless Steel
Usage/Application	Sugar Mill
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	SELVER
Country of Origin	Made in India

Hydraulic Oil Filter For Pressure Line Filter Cartridge

As The Name Suggested, These Filters Are Capable Of Bearing Pressures Up To The Range of 210 Bar And More. These Are Mainly Installed Between The Pump And The Control Valves In Order To Eliminate Contamination Problems And Protect The Valves From Pump Failures.
Failure of these Pumps and Valves Sometimes run into losses up to lakhs of rupees.Thus, in order to protect the machine and for its longevity appropriate filters is required.Hydraulic Filters are Industrial Filter that are Designed to Purify Petroleum-Based Liquids Such as oils. These Types of Filters are Often Found in a Different Hydraulic Systems to Prevent a Breakdown Caused By Oil Impurities. Its Possible to use Hydraulic Filters to Purify Water Based Liquids, Too.Hydraulic Filters and Oil Filters are Made in a Variety of Shapes, Sizes, Micron Ratings, Pressure Ratings and Materials of Construction ENVIRO TECH INDUSTRIAL PRODUCTS offers a complete line of Hydraulic Oil Filters ,Return line, Pressure Line, & Lube Oil Filters for Removing Dirt Particles and Water From Oil. With Rich OEM Experience. From Hydraulic Oil Filter Elements, Lube Oil Filter Elements, High Flow Oil Filter Elements Are Design to Clean Hydraulic & Lubrication Oil For Maximum Service Life and Reduce Disposal Costs.An Oil Filter Element is Media Whose Design is such that it Traps All Oil Contaminants.Basically, an Oil Filter Element Removes All Particles and Contaminants From Circulating Within The Engine And Hydraulic Machines.
Features:

Stable Structure.
Large Circulation Area.
High Filter Efficiency.
Simple Structure.
Big Dirt-Holding Capacity.
Light Weight.Uniform Air Holes.
High Filtration Accuracy.
Long Equipment Life.
Low Maintenance Cost.

Suction Hydraulic Filter For Putzmeister

Minimum Order Quantity	12 No
Filter Medium Material	Stainless Steel
Usage/Application	Putzmeister concrete pump
Pore Size	Standard
Size	Standard
Color	Dull Zinc
Material	SS304L

Suction Hydraulic Filter For Putzmeister

Putzmesiter Suction Hydraulic Filter, PUTZ1404 and 1407 Hydraulic Filter, Aquarious Hydraulic Filter, Concrete Pump Hyd Filter

ALSO AVALIABLE CUMMINS FILTERS , JCB FILTERS, DUST FILTERS FOR TPS MACHINES, FILTERS FOR ACTION CONSTRUCTION EQUIPMENTS, ACE, 6CT KIT, CUMMINS 6CT KIT, LF9009, FS1212, WF2075 EQUIVALENT IMPORTED KIT.

Suction Filter

Minimum Order Quantity	12 No
Brand	Enviro Tech Industrial Products
Filter Medium Material	Stainless Steel
Color	Silver
Material	Fiberglass,Microfiber,Paper ,Metal,Stainless Steel
Flow Rate	8 LPM to 600 LPM
Connection BSP	1/4″ to 3″ Inch
Accuracy Micron	Reusable stainless steel 100 mesh / 149 Micron Std
Sealent	Epoxy Based

Suction Filter

We Are The Most Trusted Name Amongst The Topmost Companies In This Business, Instrumental In Offering The High Quality Array Of Suction Filter.

Features:

– Best Grade Material Used High Dirt Holding Capacity- Compatible With a Wide Range Of Fluids

Specifications:

Flow Rate: Suction Strainers Are Available From a Flow Rate of 5 to 250 lpm
Nominal Particle Rating: Filters Are Available From 10 Microns To 150 Microns Filtration Rating
Filter Caps: Die Cast Aluminium Nut And Caps Are Installed
Filter Media: Stainless Steel Wire Mesh And Perforated Steel Core
Sealant: Epoxy Based
Sizes: Custom Build Sizes Are Offered
Operating Conditions: Filter Can Withstand Temperature Up to 120ºc. Filter Is Washable Or Can Be Cleaned By Applying Air Pressure And Reused

Filter For Hydraulic Injection Moulding

Minimum Order Quantity	12 Number
Filter Type	Return Line Filters
Material	Polyester
Usage/Application	Industrial
Color	White
Application	For use With Hydraulic Fluids Oil Coolants
Application	Cutting Oil and Lubricants

Filter For Hydraulic Injection Moulding

We provide Filter For Hydraulic Injection Moulding.
Size:
Multiple Length ElementsStainless Steel Woven Wire 140 MicronMicro Glass beta 75 in 3 to 10 Micron

Application:

For use With Hydraulic Fluids Oil CoolantsCutting Oil and Lubricants.

Types of Elements Used:

High Pressure Element
Low Pressure Elements
Size-Multiple Length Elements
Filtrations Media & Micron

Features:

Micro Glass Fiber, Beta 75 in, 1,3,5, 10 and 25 Micron
Cellulose 3, 10, 25 Micron
Stainless Steel Woven Wire From 5 to 200 Micron
Temperature Range 10 °C to 100 “C
Working Pressure Across the Element is 30 Bar to 315 Bar

Hydraulic Filter Jacks & Cylinders

Minimum Order Quantity	12 No
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	SS 304
Usage/Application	Industrial
Country of Origin	Made in India
Dimension (LxWxH)	65 mm x 65 mm x 215 mm
Filtration grades	70 micrometer – 2 millimeter
Working pressure	21 bar – 210 bar

Hydraulic Filter Jacks & Cylinders

Our Clients Can Avail Premium Quality Of Hydraulic Filters From Us. Our Professionals Made The Offered Hydraulic Filters By Making Use Of The Nylon Microfibers Via Melt-Blown Process So As To Make These Capable Of Working With Chemicals. These Filters Are Used In Industries To Remove Metals And Other Contaminated Material From The Existing Source.

Pleated Sintered Mesh Cartridge

Minimum Order Quantity	12 No
Usage/Application	Air Filter
Type	Pleated Sintered Mesh Cartridge
Diameter	2″-3″
Shape	Round
Length	10″-15″
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Micron Ratings	100
Size	150 MM
Model Name/Number	ETIP
Country of Origin	Made in India

Pleated Sintered Mesh Cartridge

The Main Component Of Pleated Sintered mesh cartridge is the folded filter layer. It is made from sintered mesh, then folded and cut into cylinder shape. The inner part can be made into perforated metal cylinder to reinforce its mechanical strength. Fittings of pleated sintered mesh cartridge may be o-rings or zinc-pleated end caps.

Application
Sintered metal filters are recommended for filtration application of air, liquid, solid at higher operating temperature and corrosive environment (Nitrate, sulfuric, acetic, hydrogen, acetylene, etc.), sintered metal powder filter is especially for sour gas Filtration. As a porous Material, sintered metal filter is widely used in the industries such as catalyst recycling, food and beverage, environmental protection, chemical, pharmaceutical, and metallurgy.

Gases: filter fine particles in nitrogen stream.
Food and beverage: iron oxides removal in steam service, and pulp removal from fruit juices.
Chemicals: filtration in chemical processing, precious metal catalyst removal from organic intermediates stream.
Water: pure water production and circulating water filtration in electric power plant.

Air Washer Filters Suppliers – Manufacture From India

Panel Filter

Minimum Order Quantity	12 Number
Brand	ETI
Filter Type	Suction Filters
Usage/Application	Filters
Filtration Grade	Pre Filter
Shape	Rectangle
Efficiency	G2
Medium Material	Metal Mesh

Our technical expertise enables us to manufacture and supply a high quality range of Panel Filter. The offered panel filters are manufactured in compliance with international quality standards using excellent quality raw material and sophisticated technology. These panel filters are designed with high precision and tested on various quality parameters. In, addition to this we offer these panel filters in various technical specifications at highly competitive prices.

Features:

Optimum functionality
Less maintenance
Durable finish standards

Pleated Type Pre Filters

Usage/Application	Filters
Is It Reusable	Reusable
Frame Material	Cardboard/Galvanized Iron/Aluminum/Stainless Steel
Media	Synthetic/HDPE/Glass Fibre
Filter Class	G2/G3/G4
Average Arrestance	80/90/95%

High Performance pleated panel air filters for HVAC & General Ventilation used as pre filtration to extend the life of Fine Filters.

Features:

Low initial pressure drop
Disposable/Washable
Maintenance Free
Compact Design

Dust Air Filter

Minimum Order Quantity	12 Number
Usage/Application	Filters
Material	Nylon
Shape	Rectangular
Color	Black
Brand	ETI
Average Arrestance	65%

Dust Air Filter:

Large air flow and low resistance
Temperature and moisture resistance
High acid and alkali resistant

Dust Air Filter:

Application: Filter Dust, be widely used in Fan Coil Unit , Diffuser and the Indoor equipment with the large Air Flow, also applied to the pre filtration of the air conditioning system and the clean room.

Technical parameters.
				EN799
Dimensions)			Rated Air Flow		Layers	Initial Resistance
( mm )			( M3/H )			( Pa )

Height	Width	Depth
595	595	10	4000	G1	1-2
595	295	10	2000	G1	1-2
595	595	21	4000	G1	1-2	25
595	295	21	2000	G1	1-2	25
595	595	46	5000	G2	2-4
595	295	46	2500	G2	2-4

,,.In case specifications, structural changes to the latest data provided by the company, which ever is the concern of this update, please attention the company’s Web site.)



,.We accept the orders of non-standard specifications, but the prices separately negotiable)

ROD Frame Type Pre Filter

Minimum Order Quantity	12 Number
Usage/Application	RO Filters
Material	Synthetic Fiber
Efficiency	98%
Brand	ETI
Air Volume	400 m3/H
Shape	Rectangle

To serve escalating requirement of our clients, we are committed towards offering a wide range of ROD Frame Type Pre Filter. Our skilled professionals manufacture the entire range by using well-tested raw material and sophisticated technology. In addition to this, our offered filter is rigorously tested by our quality controllers against diverse parameters in order to deliver a defect-free range at clients’ end. Moreover, the offered filter is extensively appreciated by our clients for featuring variegated attributes like low maintenance and sturdiness.

Features:

Strong construction
Durability
Washable

Construction: are made from high quality synthetic non-woven media, supported by stitching HDPE media on both sides. Media is then stitched and housed inside a rod frame.

Pre Filter

Minimum Order Quantity	40 Number
Filter Type	Suction Filters
Usage/Application	Filters
Material	Aluminium
Color	White
Efficiency	98%
Brand	ETI
Shape	Rectangle

Keeping track of the latest market development, we are introducing a wide range of Pre Filter. Offered in varied sizes and specifications as per the application requirements of our clients, this filter is manufactured using superior quality raw material and employing contemporary technology. In addition, our quality examiner conduct a series of test on this range in order to eradicate any kind of defect in it.

Features:

High dust holding capacity
Low maintenance
Durability

Enviro Tech Pre Filters Are Most Suited For :

Air handling units (ahus), air-conditioning systems, power plants, chemical and fertilizer complexes, green houses, automatic drain holes, paint shops, textile mills, cement factories, laminar air flow units, biosafety hoods, fan filter units (ffu), gas turbine industry, compressor, diesel engines, nuclear power station, cd-rom production industry, picture tube production industry, semi-conductor industry, aeronautical industry and miscellaneous.

Pre Filters Ductable Unit

Minimum Order Quantity	12 Number
Filtration Grade	Pre Filter
Construction	Box Filter
Medium Material	Synthetic Fiber, Microfiber
Rated Flow	2000 CFM
Efficiency	95 %
Pressure Drop	25 MM WC

Pre filters are manufactured from high density polyethylene mesh which has excellent washable properties as compared to other filter media. Since this filter encounters maximum dust loading, such washable property ensures longer service life of the filter. These filters can be offered in non woven synthetic media and can be supplied either in flange type or box (cassette) type construction. The filter can be supplied in MS, Aluminium or Stainless Steel frames.

Applications:

Heating, Ventilation & Air Conditioning
Thermal power plants
Nuclear power plants, research organizations & nuclear installations
Pharmaceutical industry
Clean rooms
Computer installations
IC manufacture
Aerospace applications

Other Details:

These filters are widely used in Fresh Air supply , AHU systems.Central A/C Units, Fan coil Units etc.. With synthetic non woven media /HDPE they are designed to give an efficiency of 90% down to 10 to 20 microns,Similar to micro fine, they are also made as box types or Flange types. Usual sizes available are.

HDPE Pleated Rod Type Pre Filter

Minimum Order Quantity	12 Number
Usage/Application	Filters
Efficiency	97.99%
Brand	ETI
Frame Material	Aluminium
Shape	Rectangle

Construction: are made from high quality synthetic non-woven media, supported by a fine HDPE media on both sides. Media is then housed inside an extruded aluminium frame.

Specifications:

SPECIFICATION
Efficiency	Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order.
Filtration Class	Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available
Frame Type	Available in flange or box type
Frame Material	Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order.
Filter Media	HDPE and non-woven synthetic.
Gasket	No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request
Separators	None
Sealant	PU based epoxy
Face Guard	No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides
Nominal Depth	Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type)
Sizes	Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order.
Pressure Drop	Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG
Operating Conditions	Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused.
Application	Athlete Pre filters are most suited for:
	Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation.

Air Washer Filter

Minimum Order Quantity	12 Number
Efficiency	90-99% down to 15-3 micron
Temperature	70degC max 160degC
Size	24 X 24 X 12”
Filter Media	HDPE , Nonwaven High temperature Fabric
Frame	GI, Aluminium, S.S, Anadiged Aluminium

Our competency lies in offering our clients an excellent quality range of Air Washer Filter at the most cost effective prices. Only high quality raw material is used while manufacturing the offered range, for increased compliance with international standards of quality. This is widely used in pharma processing units, chemical & fertilizers plants and hospitals. The offered range is highly appreciated among clients for its high quality and compact design. Clients can avail the offered filter from us at highly affordable prices.

Features:

Sturdiness
Easy to clean
High efficiency

Specifications:

Air filters are of many types and are designed, manufactured, and applied to meet a wide variety of industrial and commercial requirements for clean air.
Commercially available filters are divided into three distinct categories based on how they operate to remove suspended particulate matter from the air passing through them.
The largest category, often referred to as ventilation or heating, and air conditioning (hvac) filters, is composed of highly porous beds of resin-bonded glass or plastic fibers.
Technotech airflow systems offer air filters, which protect the equipment and delicate instruments from the dirt, water, and oil usually, found in compressed air.
Our filters remove these contaminants at an efficiency rate of 99. 99% for 0. 01-micron particles and droplets.

Applications:

Pharma processing units.
Chemical & fertilizers plants.
Hospitals – operating rooms & icu’s.
Main frame computer installations.
Paint booths.
Cement factories.
Film processing labs.
Pre filter to hepa systems.
Mushroom farms.

Lightweight Pleated Filters

Brand	ETI
HEPA Filter Type	Type A
Efficiency	G2-G4(EN779:2002)
Filter Medium Material	Microfiber, Activated Carbon, Fiberglass
Usage	Air Filter
Resistance	50 Pa

Rlement for primary filtration-smooth air flow. Ideal as a Pre Filter fram in multi-stage filter for centrifugal compressor air inlet.Galvanized frame provides strength and corrosion resistance. Synthetic Filter medium . Our engineering skills and experience go back more than 50 years and because we are not overloaded with layers of management, we are able to respond to needed changes quickly. Most importantly we are a filter manufacturing company.
We are here to meet the growing needs for air filtration and look forward to giving our customers what they need, when they need it and at a competitive price.
Characters Large flowing rate, lower resistance and high dirt holding,washable.
Frame Aluminum or Galvanized Steel frame designed can be knocked-down. Filter media The filter media can be reused for many times, lower resistance and high dirt holding.

Belt Driven Centrifugal Blower Manufacturer Delhi

Centrifugal Blower Belt Driven 12000 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	High Pressure
Phase	3 Phase
Model Name/Number	ETIP-65
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	12000 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	12000 CFM
Part No.	ETIP-65
Packaging Type	1
Fan Speed	12000 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 12000 CFM

FAN MODEL – ETIP-65
FLOW CFM – 12000
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 12.5 HP
RPM – 1440

SCOPE OF SUPPLY –

Fan With Drive Pack ( Include,Bearing,Pulley,Shaft,Belt,Belt Guard ) Motor 3 Phase 415 V 50 Hz Crompton,Havells,BBL Make ) INLET & Outlet Matching Flanges And Single Channel Base Frame.

Features:

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 7500 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	High Pressure
Phase	3 Phase
Model Name/Number	ETIP-45
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	7500 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	7500 CFM
Part No.	ETIP-45
Packaging Type	1
Fan Speed	7500 CFM
Air Flow Rate	7500 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 7500 CFM

FAN MODEL – ETIP-45
FLOW CFM – 7500
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 7.5 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 2500 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-20
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	2500 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	2500 CFM
Part No.	ETIP-20
Packaging Type	1
Fan Speed	2500 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 2500 CFM

FAN MODEL – ETIP-20
FLOW CFM – 2500
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 2 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 9500 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-55
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	9500 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	9500 CFM
Part No.	ETIP-55
Packaging Type	1
Fan Speed	9500 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 9500 CFM

FAN MODEL – ETIP-55
FLOW CFM – 9500
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 10 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 16000 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-75
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	16000 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	16000 CFM
Part No.	ETIP-75
Packaging Type	1
Fan Speed	16000 CFM
Air Flow Rate	16000 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 16000 CFM

FAN MODEL – ETIP-75
FLOW CFM – 16000
ST.PR.MM WG – 70
DRIVE – BELT
MOTOR – 15 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 600 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	III
Model Name/Number	ETIP-10
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	600 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	600 CFM
Part No.	ETIP-10
Packaging Type	1
Fan Speed	600 CFM
Air Flow Rate	600 CFM
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 600 CFM

FAN MODEL – ETIP-10
FLOW CFM – 600
ST.PR.MM WG – 35
DRIVE – BELT
MOTOR – 0.5 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 1100 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-15
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	1100 CFM
Air Volume	1100 CFM
Part No.	ETIP-15
Packaging Type	1
Fan Speed	1100 CFM
Air Flow Rate	1100 CFM
Impeller	MS
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 1100 CFM

FAN MODEL – ETIP-15
FLOW CFM – 1100
ST.PR.MM WG – 50
DRIVE – BELT
MOTOR – 1 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 4500 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-25
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	4500 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	4500 CFM
Part No.	ETIP-25
Packaging Type	1
Fan Speed	4500 CFM
Air Flow Rate	4500 CFM
Impeller	MS
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 4500 CFM

FAN MODEL – ETIP-25
FLOW CFM – 4500
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 3 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Ecmt200 Aerosense Caron Monoxide Transmitter

Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-85
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	19000 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	19000 CFM
Part No.	ETIP-85
Packaging Type	1
Fan Speed	19000 CFM
Air Flow Rate	19000 CFM
Impeller	MS
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 19000 CFM

FAN MODEL – ETIP-85
FLOW CFM – 19000
ST.PR.MM WG – 70
DRIVE – BELT
MOTOR – 20 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Centrifugal Blower Belt Driven 6000 CFM

Minimum Order Quantity	1 Piece
Blower Type	Centrifugal Blower Belt Driven
Usage/Application	Industrial
Power	3 Phase 415 V 50 Hz
Fan Type	Centrifugal Blower Belt Driven
Pressure	Medium Pressure
Phase	3 Phase
Model Name/Number	ETIP-35
Power Source	Electric Blower
Blade Material	MS
Electric Current Type	AC
Speed	6000 CFM
Voltage	3 Phase 415 V 50 Hz
Air Volume	6000 CFM
Part No.	ETIP-35
Packaging Type	1
Fan Speed	6000 CFM
Air Flow Rate	6000 CFM
Impeller	MS
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

Centrifugal Blower Belt Driven 6000 CFM

FAN MODEL – ETIP-35
FLOW CFM – 6000
ST.PR.MM WG – 65
DRIVE – BELT
MOTOR – 5 HP
RPM – 1440

Longer Service Life
Rugged In Construction
Efficient Performance

Applications:

Fume Extraction
Ventilation
Scrubbing
Degasification

Air Distribution Product Louvers Manufacture From India

Fresh Air Louvers

Usage/Application	Office Use
Material	Aluminium
Brand	ETIP
Shape	Square
Finishing Type	Powder Coated
Open Style	Sliding

We manufacture Fresh Air Louvers which are used for the intake of fresh air. Our Fresh Air Louvers are made from extruded aluminum profiles. These louver blades are wrapped up on the main frame of the louver by an appropriate ‘l’ section aluminum filters. As an option for filtering, controlling and protecting the intake of air, we have fixed a bird screen and volume control dampers.

Double Louver Aluminum Grill

Louver Type	Adjustable
Usage/Application	Air Deflector, Air Ventilation
Material	Aluminum Alloy
Brand	ETIP
Finishing Type	Powder Coated
Open Style	Sliding

Our name is counted among the prominent companies, engaged in offering our clients a huge gamut of Double Louver Aluminum Section Grill. Fabricated with quality grade aluminum, this product is known for its characteristic like- easy installation, robust design. The rendered product finds its wide application for the supply and return of air process. The machine possesses ongoing interior trend quality which requires linear grilles for ceiling and side wall application.

Features:

Easy to install
Installs in ceiling and side-wall application
Robust and sturdy structure
Durable Longer service life.

Air Intake Grills Louver

Minimum Order Quantity	12 Unit
Usage/Application	Air Conditioner
Brand	ETIP
Finishing Type	Powder Coated
Open Style	Hinged
Material	Aluminum
Size	610 x 610 mm
HIPS Size	150×300 mm, 250×250 mm, 300×300 mm, 360×360 mm

The commitment to quality has placed us among the top notch Outside Air Intake Louver Exporters from India. Our Air Intake Grills Louver are available with a flat surface mounting lighting fixtures and electrical outlets. They help in taking air in and out from the houses. Fabricated in square & rectangular shapes, these ceiling diffusers are compatible with modular ceiling applications, where any size of diffuser replaces ceiling tile. These Fresh Air Intake Louvers are made from quality raw material to ensure durability, resistance to moisture and resistance against wear & tear.

Intake Louvers

Usage/Application	Office Use
Material	Aluminium
Size	150 to 250 Inch Neck
Brand	ETIP
Finishing Type	Color Coated (Ra l9010 or Ral 9016 Paint)
Open Style	Sliding

We manufacture fresh air louvers which are used for the intake of fresh air. Our air control louvers and dampers are made from extruded aluminum profiles. These louver blades are wrapped up on the main frame of the louver by an appropriate ‘l’ section aluminum filters. As an option for filtering, controlling and protecting the intake of air, we have fixed a bird screen and volume control dampers.

External Weather Louvers

Minimum Order Quantity	12 Number
Louver Type	Double
Usage/Application	Air Conditioner
Material	Stainless Steel
Type	Venetian-Style Outlet
Brand	ETIP
Finishing Type	Powder Coated
Open Style	Sliding

Leveraging on the skills of our professionals, we are involved in offering a wide assortment of External Weather Louvers. These External Weather Louvers are extensively used as covering grilles in air supply and exhaust openings. Further, these products are easy to use and available in market at reasonable prices.

Applications:

Used for exhaust/intake system

Drum Louver

Usage/Application	Air Conditioner
Material	Aluminium
Brand	ETIP
Finishing Type	Powder Coated
Open Style	Sliding

Construction:

Frame : Constructed with high quality extruded aluminium profiles.
Drum : Aluminiium sheet and specially shaped extruded aluminium profiles.
Blades: High quality extruded aluminium adjustable directional blades.
Damper: Opposed blade damper made with aluminium profiles.

Description:

Blades are fixed inside the drum body made with aluminium sheets and specially shaped profles and the opposed blade damper is attached to the drum body. The whole assembly is fixed to the frame by mechanical fasteners so as to enable rotation in the vertical direction.
The opposed blade damper in supply diffuser can be easily adjusted through the face of the unit by means of screw driver.
The louver is suitable for both long and short throw patterns with trajectory control.
The drum can be adjusted in the vertical direction 0 to 30 degree up or down to direct the air throw in the desired direction.
Foam gasket is sealed around the back of the frame to avoid air leakage.

Single Louver Aluminum Grill

Usage/Application	Industrial
Brand	ETIP
Blade Spacing	20 mm
Available Material	Aluminium, MS, SS
Available Finish	Powder Coated, Anodized, Emulsion Painted, Primer Coated

We are a reputed company, offering our clients a huge assortment of Single Louver MS Grill. The offered product is used as a fan-outlet, that is used to control the flow of air. The product have a two rows of parallel and opposed configuration bar respectively, that are externally linked to optimize fan performance. Apart from this, the product is manufactured with quality supreme quality raw materials, sourced from certified vendors.

Features:

Controls flow of air
Used as Fan-outlet
Longer life cycle
Designed with Nylon Bushes for efficient, smooth and quiet operation & to avoid rattling noise
Aerofoil shaped blades
Deflection blades are adjustable manually and individually
Single/Double deflection with high Quality anodizing or powder coating.
With or Without Opposed blade Dampers
Can be handled in desired pattern of air- flow

Double Louver MS Grill

Minimum Order Quantity	1 Unit
Brand	ETIP
Dimension	1220 x 480 x 1140 mm
Usage/Application	Air Deflector, Air Ventilation
Material	Aluminum
Finishing Type	Powder Coating

Double Louver MS Grill Our company is instrumental in present an array of Double Louver MS Grill. The offered product range finds its application supply and return of air process, as fresh air section exhaust discharge for protection from dust and rain. This product is power coated to ensure longer service life and durability in any working condition. The product is also preferred for its various features and characteristic, namely Protects against dust and rain Longer service life Durable Capable of working in any situation Fabricated with top quality raw materials.

Single Louver MS Grill

Material	Mild Steel
Brand	ETIP
Shape	Rectangular
Surface Finish	Powder Coated
Usage/Application	Air Deflector, Air Ventilation

Single Louver MS Grill provides a combination of isolation and flow control. The assembly consists of a single row of blades, all of which are externally linked in a parallel or opposed configuration depending upon the desired flow pattern. The parallel arrangement is often used on fan inlets to optimize fan performance. The opposed arrangement is used where a more linear flow is desired such as fan outlets.

Aluminum Louvers

Minimum Order Quantity	100 Unit
Usage/Application	Air Deflector, Air Ventilation
Material	Aluminum
Brand	ETIP
Finishing Type	Powder Coated
Open Style	Sliding

Backed by years of experience in these domain, we are able to render our patron, a comprehensive range of Aluminum Louvers. The offered product control both the isolation and air flow. The Louver Aluminium Section comprises a series of two row of blade both horizontally and vertically, that interlinks each other and that can be move according to desired pattern. The product is often used for the purpose of fan inlets.

Attributes:

Longer service life
Controls flow of wind
Capable of moving in any direction
Used to maximize fan performance
Less consumption of power
Easy to install

Acoustic Louver

Minimum Order Quantity	50 Number
Usage/Application	Noise Barriers
Brand	ETIP
Material	Aluminum Alloy
Finish	Powder Coated
Acoustic Louver Blade Size	6″ / 8″

Acoustic Louver has a sound baffle designed to allow airflow through ventilation openings while reducing the radiation of noise. Acoustic louvers used in conjunction with machine sound enclosures, sound barrier walls and sound control rooms to allow silenced airflow. We supply an extensive range of Acoustic Louver , which are available in various sizes, shapes and designs. Our Acoustic Louver are being widely used for regulating the airflow through fans, ducting, tunnels or chambers. We can also customize the products as per the specifications, detailed by our clients.

Caryaire Inline Fan Circular Inline Fan Wholesaler In Delhi India

CARYAIRE CF-250BB Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	5.7 KG
Sound Level	51
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.8
Airflow	2284
Type	Circular Inline Fan
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	51 dB (A)

CARYAIRE CF-250BB Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-250BB
Speed Rpm : 2284
Sound Pressure Level db (A) : 51
Current A : 0.8
Input W : 170
Net Weight Kg : 5.7
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

CARYAIRE CF-315B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	7 KG
Sound Level	53
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	1.35
Airflow	2277
Type	Circular Inline Fan
Voltage	220-240 V,Single Phase,50 Hz
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	53 dB (A)

CARYAIRE CF-315B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-315B
Speed Rpm : 2277
Sound Pressure Level db (A) : 53
Current A : 1.35
Input W : 300
Net Weight Kg : 7
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

CARYAIRE Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	3.2 KG
Sound Level	46
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.26 A
Airflow	2370
Type	Circular
Country of Origin	Made in India
Model	CF-100B
Power	60 W

CARYAIRE Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

All MODELS :

CF-100B
CF-125B
CF-150B
CF-160B
CF-200B
CF-250BB
CF-315AA
CF-315B

CARYAIRE CF-125B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	3.2 KG
Sound Level	47
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.3
Airflow	2260
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	47 dB (A)

CARYAIRE CF-125B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-125B
Speed Rpm : 2260
Sound Pressure Level db (A) : 47
Current A : 0.3
Input W : 65
Net Weight Kg : 3.2
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

CARYAIRE CF-150B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	4.6 KG
Sound Level	47
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.43
Airflow	2370
Type	Circular Inline Fan
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	47 dB (A)

CARYAIRE CF-150B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-150B
Speed Rpm : 2370
Sound Pressure Level db (A) : 47
Current A : 0.43
Input W : 95
Net Weight Kg : 4.6
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition

CARYAIRE CF-160B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	4.6 KG
Sound Level	49
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.6
Airflow	2567
Type	Circular Inline Fan
Voltage	220-240 V,Single Phase,50 Hz
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	49 dB (A)

CARYAIRE CF-160B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-160B
Speed Rpm : 2567
Sound Pressure Level db (A) : 49
Current A : 0.6
Input W : 125
Net Weight Kg : 4.6
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition

CARYAIRE CF-200B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	5.7 KG
Sound Level	52
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.65
Airflow	2488
Type	Circular Inline Fan
Voltage	220-240 V,Single Phase,50 Hz
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	52 dB (A)

CARYAIRE CF-200B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-200B
Speed Rpm : 2488
Sound Pressure Level db (A) : 52
Current A : 0.65
Input W : 145
Net Weight Kg : 5.7
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

CARYAIRE CF-315AA Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	7 KG
Sound Level	53
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	1.1
Airflow	2300
Type	Circular Inline Fan
Voltage	220-240 V,Single Phase,50 Hz
Country of Origin	Made in India
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	53

CARYAIRE CF-315AA Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-315AA
Speed Rpm : 2300
Sound Pressure Level db (A) : 53
Current A : 1.1
Input W : 230
Net Weight Kg : 7
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

CARYAIRE CF-100B Circular Inline Fan

Minimum Order Quantity	6 Piece
Weight	3.2
Sound Level	46
Power Source	220-240 V,Single Phase,50 Hz
Brand	Caryaire
Current	0.26 A
Airflow	2370
Country of Origin	Made in India
Net Weight	3.2 kg
Motor IP Rating	IP 44
Insulation Class	Class F
Noise Level	46 dB (A)

CARYAIRE CF-100B Circular Inline Fan

Inline Centrifugal Duct Fan is a Straight Through Radial Fan. It is Compact, With a High Capacity and Very Easy To Install. The Fan Can Cope With High Pressure and Long Duct Runs, Whilst Still Operating at An Acceptable Sound Level.
The Fan Speed Can Be Controlled By Voltage Or Frequency Variation Regulators. Several Fans Can Be Connected To The Same Controller Provided The Total Nominal Current Of The Fans Does Not Exceed The Rating Of Controller.
The Circular Inline Fans Are Moisture Resistant and Are Approved For Installing in Humid or Damp Environments. The Fans are Rated IP44 When Installed in a Duct System. They Must Not Be Used For Transporting Grinding Dust, Soot Or Similar Air Borne Particles. The Casing Best Replica Watches Is Manufactured From Pre-Galvanized Steel. Automatic Thermo-Contacts Open If The Temperature Within The Motor Windings Becomes Excessive. Fan is Equipped With CE Certified External Rotor Single Phase Asynchronous Motor

Features:

Simple Installation
Less Maintenance
Low Power Consumption

Circular Inline Fan – TECHNICAL DATA

MODELS : CF-100B
Speed Rpm : 2370
Sound Pressure Level db (A) : 46
Current A : 0.26
Input W : 60
Net Weight Kg : 3.2
Power SUPPLY 220V-240V,1-???,50 Hz A. C.
Motors Have 1P-44 Enclosure With Class F Insulation.
Weighted Sound Pressure Level in dB (A) is at a Distance of 3 Meters.
Noise Data Given is at Lab Test Condition.

Kitchen Fume Exhaust System Filter Manufacturers India

Wire Mesh Filter

Minimum Order Quantity	1 Number
Brand	ETIP
Usage/Application	Air Handling Units (Ahus), Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories
Shape	Rectangular
GI Mesh	40 Micron
Available Material	Aluminum, SS
Pressure Drop	Initial Pressure Drop ~1mm Wg And Recommended Final Pressure Drop Is 5-10mm Wg
Face Guard	Filter Is Protected With Expanded Mesh On Both Sides
Efficiency	65-85%

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade assortment of Wire Mesh Filter, used in Air Washers or Fresh Air Units. We assure our clients that our range is quality tested on predefined parameters, in order to meet international standards. Apart from this our prestigious clients can avail the entire range as per their needs, at highly competitive price. This filter can be cleaned very easily.

Features:

Reliability
Premium quality
Highly durable

Mist Eliminator Filter

Minimum Order Quantity	12 No
Brand	ETIP
Available Frame Material	Standard Galvanized Mild Steel, Stainless Steel Or Aluminum
Media	Knitted Or Multilayer Pad
Arrestance Efficiency	65% – 80%
Eurovent 4/5 Efficiency	EU2, EU3
Temperature	100 deg C Maximum In Continuous Service
Humidity	100% RH
Accessories	Handles And Drain Holes

Application:

Kitchen extract systems, Pre filtration within air conditioning systems.

Metallic Filters

Minimum Order Quantity	1 Number
Application	Air Washer Unit
Brand	ETIP
Size	610 mm x 610 mm x 50 mm
Max. Temperature	400 deg C
Max. Humidity	100%
Media	Aluminum Mesh/Stainless Steel Mesh
Available Frame Material	Ai Andoized/ GL/ SS 304/
Average Arrestance	65-85%
Efficency	80% down to 10 micron
Face Velocity	2.5 (M/Sec)
Initial Pressure Drop	<3MM of WC
Recommended final Pressure Drop	15MM of WC

Metallic Filters are designed for removing coarse particles, water droplets or mist and Grease from the Air stream.

Product Information – Standard Sizes:

Sl. No.	Dimensions (MM)	Rated Air Flow Capacity(CMH)			Initial Resistance (MM of WC)
	(HXWXD)	@ 1.5M/Sec	@2.54M/Sec		@1.52M/Sec		@2.54M/Sec
1	610X610X25	2040	3400		1.7		2.8
2	305X305X25	1020	1700		1.7		2.8
3	305X305X25	510	850		1.7		2.8
4	610X610X50	2040	3400		1.7		2.8
5	305X610X50	1020		1700		1.7	2.8
2	305X350X50	510		850		1.7	2.8

Grease Filters

Minimum Order Quantity	1 Number
Shape	Rectangular
Efficiency	F9
Brand	ETIP
Clapboard	Without Clapboard
Filter Number	1 Medium
Material	Stainless Steel Mesh

Grease Filters are light weight, aluminium / SS Baffle Grease Stop Air Filter having non-clogging type characteristic and designed for constant flow. Construction: Available in three models: made of galvanized steel, aluminum or stainless steel, these 2″ thick baffle grease filters contain two layers of roll formed baffles, equally spaced and without any sharp edges. Spacing creates an airflow that causes grease to collect, drain down the baffles and into collecting trough. Filters are designed to prevent flame from passing through the filter baffles, and are made to withstand different temperature levels.

Application:

These filters are used on those kitchen extract systems where functionality and economics are paramount and where the grease load is relatively low.

Metal Filters

Minimum Order Quantity	100 Number
Clapboard	Without Clapboard
Medium Material	Metal Mesh
Efficiency	G2
Frame Material	Aluminum
Available Nominal Width	1/2, 1″, 2″ and 4″
Brand	ETIP

All Metal Filters are Designed With Aluminum and Galvanized Style Frames with mesh to remove dirt, grease and other objects.These washable filters are used in residential,industrial and commercial applications where a long lasting cleanable filter is required.Some of these styles are light duty aluminum to heavy duty galvanized metal and even stainless steel. The style is determined by your requirements.Washable Filters are normally available in nominal widths for most styles but may be offered in others styles. Custom sizes are also available.

Very Low Differential Pressure Gauge

Minimum Order Quantity	12 Number
Accuracy	Plus or minus 2% of full scale, at 70 deg F. (Model 2000-0, 3%; 2000-00, 4%)
Weight	1 lb. 2 oz
Dimensions	4-3/4″ dia. x 2-3/16″ deep
Finished	Baked Dark Gray Enamel
Connections	1/8″ NPT high and low pressure taps
Pressure Rating	15 PSI (0,35 bar)
Ambient Temperature Range	20 deg to 140 deg F (-7 to 60 deg C)

Features:

4 Pressure Measurement from 6mmwc upto 100mmwc
4 Dial Sizes 4-1/2” (115mm)
4 Aluminium Case
4 Accuracy +-2% FS.
Applications
Filter Status
Duct Static Pressure
Clean Room Pressure
Building Pressure
Fan and Blower Pressure
Paint Booths
Dust Collectors
Glove Box Pressure
Bubbler Systems
Cabinet Purging

Specifications:

Type: Inductive Pressure Sensor
For: Strain Gauge Pressure Transmitter
Output Signal Type: Digital Type
Material: Metal

Hood Filter

Minimum Order Quantity	100 Number
Brand	ETIP
Automation Grade	Manual
Usage/Application	Hotel
Material Grade	SS304
Material	Stainless Steel

With support of our excellent team workers, we have been delivering the best quality range of Hood Filter. These are manufactured by employing sophisticated technology by our professionals. Available in different sizes, we also provide these products as per the clients’ specifications. Apart from this, we provide these products in customized options and at industrial leading prices.

Features:

Strong construction
High efficiency
Smooth functioning

Specifications:

We offer a range of hood and filters that are fabricated from various metals and alloys, according to the area of application
These hoods and filters are designed in order to throw out toxic or harmful fumes. These are used to eliminate the toxic gases from the kitchen through ducting with the help of exhaust blower

Pleated Metal Mesh Filter

Minimum Order Quantity	12 Number
Brand	ETIP
Frame Type	Available in Flange or Box Type GI,AL.,SS
Filter Media	GI/SS/Aluminum Expanded Mesh
Face Guard	Filter Is Protected With Expanded Mesh On Both Sides
Pressure Drop	Initial Pressure Drop ~1mm Wg & Recommended Final Pressure Drop Is 5-10mm Wg

Pleated Metal Mesh Filter are pre filters that are designed for general ventilation and air conditioning system applications as well as for electric motors and plenum air for working areas. These are an economical and a very durable option over other pre filter counterparts.

Construction:

The element is constructed using 5 layer of GI Wire mesh inter-spaced with 2 crimpled layers and 3 flat layers. The media is supported with expanded metal from both sides as reinforcement and housed usually in deep metal frame (custom build sizes are also available on order).

Specification Efficiency:

Standard Pleated Metal Mesh Filter have an efficiency of 65% for 20 micron size particles. Metallic filters with an efficiency rating of 65-85% to capture 25 micron to 50 micron size particles are also available on order. Efficiency can be increased to 85% if the filters are oil wetted.

Operating conditions:

Filter can withstand temperature >80âºc and relative humidity of 70%. Recommended air velocity is 2m/sec to 2. 5m/sec. Filter is washable and can be washed using water or back air pressure and reused.

Application:

Pleated Metal Mesh Filter are most suited for:
Air Handling Units (ahus),
Automatic Drain Holes,
Paint Shops,
Textile Mills,
Cement Factories,
Miscellaneous Industrial Ventilation.

Metallic Viscous Filters

Minimum Order Quantity	1 Number
Brand	ETIP
Shape	Square
Available Frame Material	Aluminum/Galvanized Steel/Stainless Steel
Available Protective Net Material	Aluminum Zinc Grid/Galvanized Iron Wire/Stainless Steel
Max. Temperature	400 deg C
Max. Humidity	100%

Metallic Viscous Filters are pre filters that are designed for general ventilation and air conditioning system applications as well as for electric motors and plenum air for working areas. These are an economical and a very durable option over other pre filter counterparts.

Construction:

The element is constructed using 5 layer of G.I. wire-mesh inter-spaced with 2 crumpled layers and 3 flat layers. The media is supported with expanded metal from both sides as reinforcement and housed usually in 2” deep metal frame (Custom build sizes are also available on order).

Kitchen Hood Filter

Minimum Order Quantity	12 Number
Brand	ETIP
Usage/Application	Kitchen
Grade	SS202, SS304
Available Material	SS, Aluminum
Face Velocity	1.5 m/s (300 fpm)
Flow Rate	0.25 m3/s (125 )
Actual Face Size	Nominal Size less 12mm (0.5″)
Actual Thickness	Nominal thickness less 3mm (0.125″)

We are an acclaimed name engaged in offering our precious clients a superior quality range of Kitchen Hood Filter products are manufactured using optimum grade raw material and sophisticated technology in synchronization with international standards. Baffle filters provide excellent air flow over gas, steam, or electric-powered cooking equipment and remove contaminants efficiently. In order to ensure quality, the entire range is rigorously tested on various parameters by our quality controllers. Keeping in mind the diverse requirements of our clients, we provide entire range in various sizes and specifications and at affordable prices.

Features:

Easy to clean
High efficiency
Application specific design

Applications:

Recleanable stainless steel filters that are ideal in applications such as commercial Kitchens, Hotels, Restaurants and Takeaways.

Specifications:

Sr. No.	Filter Size	Air Flow Rate(C F M)
1	610X610X50	1000
2	635X508X50	900
3	508X508X50	800
4	635X406X50	700
5	508X406X50	650

Baffles Filter

Minimum Order Quantity	1 Number
Brand	ETIP
Usage	Liquid Filter, Air Filter, Solid Filter
Product dimension (LBH in mm)	610 mm x 610 mm x 50 mm
Material	Aluminum
No. of Layers	Three
Flow Rate	0.25 m3/s (125 Pa)

Being an industry leader, we provide a wide gamut of Baffles Filter. These are made up with galvanized steel and aluminum. The spacing in the filter develops an air flow that further causes grease collection, draining down baffles and into the collecting trough. We also offer our filters in various customization as per our clients’ needs. These filters are developed to withstand various temperature levels.

Features:

Easy to clean
High efficiency
Application specific design

Moisture Separator Filter Manufacturer

PVC Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Moisture Separator Filter
Model Name/Number	Moisture Separator Filter
Material	Glass Fiber Paper
Product Type	Moisture Separator Filter
Warranty	NO
Diameter	ID 100 MM X H 550 MM
Design	ENVIRO TECH INDUSTRIAL PRODUCTS
Material Grade	Glass Fiber Paper
Size/Dimension	ID 100 MM X H 550 MM
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

PVC Cap Moisture Separator Filter

Moisture Separator Filter As Sample Top Cap Collor Type With Male Thread Bottom Closed Inner/Outer 3 MM SS Perforated Inside Glass Fiber Paper.

SIZE –

OD = 12 MM

ID = 100 MM

H = 550 MM

Moisture Separator Filter

Minimum Order Quantity	12 Number
Material	GI
Capacity	40 – 100
Type	Moisture Separator Filter
Model Name/Number	Moisture Separator Filter
Brand	ETIP
Shape	Round
Product Type	Moisture Separator Filter
Pressure	1-5 psig
Warranty	NO
Diameter	ALL
Usage/Application	Filters

Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price.

Compressor Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Glass Fiber Paper
Filter Type	Compressor Moisture Separator Filter
Color	WHITE
Shape	ROUND
Size	All Size By Order
Diameter Millimeter	ALL SIZE
I Deal In	New Only
Country of Origin	Made in India
Material Grade	Glass Fiber Paper

Compressor Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price

Perforated Sheet Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Perforated Sheet Moisture Separator Filter
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Glass Fiber Paper
Product Type	Perforated Sheet Moisture Separator Filter
Warranty	No
Diameter	OD = 100 MM, ID = 150 MM, H = 300 MM
Material Grade	SS Perforated Sheet
Size/Dimension	OD = 100 MM, ID = 150 MM, H = 300 MM
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

Perforated Sheet Moisture Separator Filter

Moisture Separator Filter As Sample Outer 3 MM SS Perforated Sheet Inside Glass Fiber Paper.

SIZE –
OD = 100 MM

ID = 150 MM

H = 300 MM

Aluminium Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Aluminum Cap Moisture Separator Filter
Model Name/Number	Aluminum Cap Moisture Separator Filter
Material	Aluminium
Product Type	Aluminum Cap Moisture Separator Filter
Warranty	NO
Diameter	AII BY ORDER
Material Grade	Glass Fiber Paper
Size/Dimension	AII BY ORDER
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

Aluminium Cap Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price.

Metal Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Metal Cap Moisture Separator Filter
Model Name/Number	Metal Cap Moisture Separator Filter
Material	Mild Steel
Product Type	Metal Cap Moisture Separator Filter
Warranty	NO
Diameter	ALL SIZE BY ORDER
Material Grade	Glass Fiber Paper
Size/Dimension	ALL SIZE BY ORDER
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

Metal Cap Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price.

SS Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	SS Cap Moisture Separator Filter
Model Name/Number	SS Cap Moisture Separator Filter
Material	Glass Fiber Paper
Product Type	SS Cap Moisture Separator Filter
Warranty	NO
Diameter	All Size By Order
Material Grade	Glass Fiber Paper
Size/Dimension	All Size By Order

SS Cap Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price.

GI Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	GI Cap Moisture Separator Filter
Model Name/Number	GI Cap Moisture Separator Filter
Material	Mild Steel
Product Type	GI Cap Moisture Separator Filter
Warranty	NO
Diameter	All Size By Order
Material Grade	Glass Fiber Paper
Size/Dimension	All Size By Order
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

GI Cap Moisture Separator Filter

We Are Counted as One Of The Trusted Manufacturer and Supplier of Moisture Separator Filter. These Moisture Separator Filter are made up of Using High Quality Raw Material & Are Available At Competitive Price.

Plastic Cap Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type Of Machine	Plastic Cap Moisture Separator Filter
Type	Plastic Cap Moisture Separator Filter
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Fiber Glass
Product Type	Plastic Cap Moisture Separator Filter
Diameter	OD=29 MM, ID=l5 MM,TH =46 MM.
Material Grade	Fiber Glass
Size/Dimension	OD=29 MM, ID=l5 MM,TH =46 MM.
I Deal In	New Only
Color	WHITE
Country of Origin	Made in India

Plastic Cap Moisture Separator Filter

Plastic Cap Moisture Separator Filter As Sample Top Cap Plastic Ring Type Bottom Closed With Hole Inside And Thread Foam Rounded Out Side OD=29 MM, ID=l5 MM,TH =46 MM.

Foam Type Moisture Separator Filter

Minimum Order Quantity	12 Piece
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Foam Type Moisture Separator Filter
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Fiber Glass
Product Type	Foam Type Moisture Separator Filter
Diameter	OD=29 MM, ID=l5 MM,TH =46 MM.
Material Grade	Fiber Glass
Size/Dimension	OD=29 MM, ID=l5 MM,TH =46 MM.
I Deal In	New Only
Color	YELLOW
Country of Origin	Made in India

Foam Type Moisture Separator Filter

Foam Type Moisture Separator Filter As Sample Top Cap Plastic Ring Type Bottom Closed With Hole Inside And Thread Foam Rounded Out Side OD=29 MM, ID=l5 MM,TH =46 MM.

Glass Fiber Paper Moisture Separator Filter

Minimum Order Quantity	12 Number
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Type	Glass Fiber Paper Moisture Separator Filter
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Glass Fiber Paper
Product Type	Glass Fiber Paper Moisture Separator Filter
Diameter	OD=29 MM, ID=l5 MM,TH =46 MM.
Design	ENVIRO TECH INDUSTRIAL PRODUCTS
Material Grade	Glass Fiber Paper
Size/Dimension	OD=29 MM, ID=l5 MM,TH =46 MM.
I Deal In	New Only
Color	YELLOW
Country of Origin	Made in India

Glass Fiber Paper Moisture Separator Filter

Glass Fiber Paper Moisture Separator Filter As Sample Top Cap Plastic Ring Type Bottom Closed With Hole Inside And Thread Foam Rounded Out Side OD=29 MM, ID=l5 MM,TH =46 MM.

Water Filter PP Nozzels Big Manufacturer Delhi.

Jet Tower Nozzles

Minimum Order Quantity	100 Piece
Material	PVC
Country of Origin	Made in India
Size	3/4 inch And 1 inch
Packaging Size	Customized
Application	Structure Pipe
Color	White
Usage/Application	JET TOWER NOZZLES

Jet Tower Nozzles

MOC – Nylon -6, Poly Propelene. Co-Polymer PP, Dearlene Polycarbonate.
Water Flow Per Nozzle = 0.5 m3 /Hr to 3 m3 / Hr.
Use: Air Motion with the help of Water Spray Venturi – Jet.

PP Spray Nozzle

Minimum Order Quantity	100 Piece
Usage/Application	Industrial
Material	ABS Plastic
Model Name/Number	ENVIRO TECH INDUSTRIAL PRODUCTS
Thread Size	1/2”
Color	WHITE
Customisation	Not Customised
Packaging Type	100 NOS
Material Grade	PP
I Deal In	New Only
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Country of Origin	Made in India

PP Spray Nozzle

Banking On The Skills Of Our Talented Team Of Qualified Professionals, We Are Instrumental In Manufacturing PP Spray Nozzles Using Excellent Quality Plastic. Our Range is Dimensionally Accurate and Meets The Variegated Requirements Of The Customers Very Precisely. These Nozzles Are Made Available in Different Specifications According To The Demands Of The Customers.

Specifications

Size : 15 MM TO 25 MM
Colour : White
Material : PP

Water Filter Nozzel

Minimum Order Quantity	100 Number
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Country of Origin	Made in India
SIZE	3/8”,1/2”

Water Filter Nozzel

MOC – PP , Water Filter Nozzle ,

Application in STP/WTP/ETP

Ring Type Filter Nozzle

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Pressure	5 Kg/cm2
Shape	Round
Country of Origin	Made in India

Ring Type Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of Ring Type Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

Nozzle Filter

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Pressure	5 Kg/cm2
Shape	Round
Country of Origin	Made in India

Nozzle Filter

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of Nozzle Filter.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

Plastic Filter Nozzle

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Pressure	5 Kg/cm2
Shape	Round
Country of Origin	Made in India

Plastic Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of Plastic Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

Plastic Filter Nozzle

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Pressure	5 Kg/cm2
Shape	Round
Country of Origin	Made in India

Plastic Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of Plastic Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

Filter Nozzle

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	WHITE
Pressure	5 Kg/cm2
Shape	Round
Country of Origin	Made in India

Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

PP Filter Nozzle

Minimum Order Quantity	100 Piece
Material	Plastic
Usage/Application	Industrial
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	Plastic
Country of Origin	Made in India
Flow	200 Litre/Hour

PP Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of PP Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

PP Sand Filter Nozzle

Minimum Order Quantity	100 Piece
Pressure	5 Kg/cm2
Color	WHITE
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Material	Plastic
Shape	Round
Country of Origin	Made in India

PP Sand Filter Nozzle

With Honest Intentions To Improve The Standing We Have Earned in This Arena, We Are Offering a Distinct Collection of PP Sand Filter Nozzle.

Min. Order – (MOQ)100 Piece(s)
MOC – Vergin PP UV Stablized
Nozzle ID – 25 MM
Connection Od – 18 MM
Connection Id – 12 MM
Connection Thread Length – 50 MM
Total Length – 102 MM
Operating Pressure – 5 Kg/cm2
Flow – 200 Litre/Hour
Size of Connection – 1/2 Inch
No. of Ring – 30
Nozzle OD – 30 MM
Production Capacity – 25 Cum / Day

PVC Gun Type Spray Nozzle

Minimum Order Quantity	100 Piece
Brand	ENVIRO TECH INDUSTRIAL PRODUCTS
Color	White
Size	1″ BSPT AND 3/4” BSPT
Country of Origin	Made in India
Orifice Diameter	2-3 mm, 3-4 mm
Pressure	1-3 bar, 3-6 bar, 6-7 bar, 7-10 bar
Material	Plastic

PVC Gun Type Spray Nozzle

ENVIRO TECH Brings To Our Customers The Sugar Mill Cooling Tower Spray Nozzle Products Required In The Sugar Mills. The Plastic Used in Making is The Best Kind And Very Ductile As Well as Malleable. The Products of PVC Plastics Are Also Made to Satisfy The Necessities Of The Customers.

E-mail us

India

Hutek Air Washers Cellulose Pads

Hutek Cel Pad Nano Xtreme

HuTek Cel Pad Nano

HuTek Cel Pad Xtreme

HuTek Cel Pad Green Brown

Celdek 7090-15 Hu Tek

Celpad 7090-15 Hu Tek Asia

Flexible Ducts

Decorative Ducts

Aluminium Ducts

Chimney Ducts Pipe

Aluminum Ducting Pipe

Flexible Aluminum Ducting Hose

Air Ducts

Aluminum Hose

Aluminum Flexible Duct Pipe

Putzmeister Pump Hydraulic Oil Filer Elements

Hydraulic & Lubracation Oil Filter

Semi Automatic Hydraulic Filter

Hydraulic Oil Filter For Pressure Line Filter Cartridge

Suction Hydraulic Filter For Putzmeister

Suction Filter

Filter For Hydraulic Injection Moulding

Hydraulic Filter Jacks & Cylinders

Pleated Sintered Mesh Cartridge

Panel Filter

Pleated Type Pre Filters

Dust Air Filter

ROD Frame Type Pre Filter

Pre Filter

Pre Filters Ductable Unit

HDPE Pleated Rod Type Pre Filter

Air Washer Filter

Lightweight Pleated Filters

Centrifugal Blower Belt Driven 12000 CFM

Centrifugal Blower Belt Driven 7500 CFM

Centrifugal Blower Belt Driven 2500 CFM

Centrifugal Blower Belt Driven 9500 CFM

Centrifugal Blower Belt Driven 16000 CFM

Centrifugal Blower Belt Driven 600 CFM

Centrifugal Blower Belt Driven 1100 CFM

Centrifugal Blower Belt Driven 4500 CFM

Ecmt200 Aerosense Caron Monoxide Transmitter

Centrifugal Blower Belt Driven 6000 CFM

Fresh Air Louvers

Double Louver Aluminum Grill

Air Intake Grills Louver

Intake Louvers

External Weather Louvers

Drum Louver

Single Louver Aluminum Grill

Double Louver MS Grill

Single Louver MS Grill

Aluminum Louvers

Acoustic Louver

CARYAIRE CF-250BB Circular Inline Fan

CARYAIRE CF-315B Circular Inline Fan

CARYAIRE Circular Inline Fan

CARYAIRE CF-125B Circular Inline Fan

CARYAIRE CF-150B Circular Inline Fan

CARYAIRE CF-160B Circular Inline Fan

CARYAIRE CF-200B Circular Inline Fan

CARYAIRE CF-315AA Circular Inline Fan

CARYAIRE CF-100B Circular Inline Fan

Wire Mesh Filter

Mist Eliminator Filter

Metallic Filters

Grease Filters

Metal Filters

Very Low Differential Pressure Gauge

Hood Filter

Pleated Metal Mesh Filter

Metallic Viscous Filters

Kitchen Hood Filter

Baffles Filter

PVC Cap Moisture Separator Filter

Moisture Separator Filter

Compressor Moisture Separator Filter