Huba Control Relative and Differential Pressure Transmitter
Range – 0-2.5 Bar
Type -692 0-2.5 Bar
Out – 4-20mA In:11-33V DC
Huba Control Transmitter
Minimum Order Quantity
12 Number
Usage/Application
Liquids And Gases
Model Name/Number
692
Brand
Huba Control
Voltage
11-33 VDC
Accuracy
< 0.5% fs
Operating Range
0 … 0.1 – 25 bar
Protection Type
Huba Control Transmitter
Rated Supply Voltage
11-33 VDC
Supply Voltage Limits
11-33 VDC
Output Type
0 … 5 V, 0 … 10 V, 4 … 20 mA
Part Type
Huba Control Transmitter
Country of Origin
Made in India
Huba Control Transmitter
Differential Pressure Transmitter 692
0 … 0.1 – 25 bar
The Pressure Transmitter Of Type 692 with proven, unique ceramic technology, features adjusted and amplified sensor signals which are available as standardised voltage or current outputs. Various application-specific pressure and electrical connections and housing materials suitable for different media can be provided.
Medium – Liquids and Gases
Pressure Range – 0 … 0.1 – 25 bar
Output – 0 … 5 V, 0 … 10 V, 4 … 20 mA
Accuracy –< 0.5% fs
Electrical Connection – Cable 1.5 m, Connector DIN EN 175301-803-A, connector DIN EN 60130-9
Pressure Connection – Hose Connection or Screw Fitting, Outside Thread, Adapter Inside- And Outside Thread
Mounting Bracket For Screw Mounting
Swiss Huba 625 Differential Switch 625.6532
Minimum Order Quantity
12 Number
Brand
Huba Control
Media Type
Gas
Range Setting
100-900 mBAR G1/4
Electrical Connection
Threaded Terminal, 6.3 MM Flat Connector (AMP Connector)
Contact Material
plastic, brass and aluminium alloy, and NBR, FPM, EPDM and silicon diaphragm
Model Name/Number
625.6532
Power/Voltage
250 V AC
Weight
200 gm
Minimum Order Quantity
12
Country of Origin
Made in India
Pressure Connection
Inside thread M5, hose connector +- 6 mm, outside thread
Swiss Huba 625 Differential Switch 625.6532
Swiss Huba 625 Pressure Switch 625.6532 Fulba Control Pressure Controller-100-900mbar
HUBA 625 Membrane Mechanical Pressure Switch It has 13 Pressure Ranges and is Suitable For Liquids And Gases. The Main Materials Can Be Plastic, Brass And Aluminium Alloy, and NBR, FPM, EPDM and Silicon Diaphragm Can be Selected. High Accuracy And Long-Term Stability Can Be Obtained By Fine Tuning Measurement Steps. Reinforcement Design is Especially Suitable For General Industrial Equipment Structure, Processing Technology And Food Automation. Technical Parameter
Relative Pressure-– 900-6000 mbar
Medium-Liquids And Gases
Maximum Overload Pressure-10 bar
Minimum Activation Pressure-2 mbar
Protection Level-IP54
Electrical Connectors-Threaded Terminal, 6.3 MM Flat Connector (AMP Connector)
Vacuum Equipment,_Air Compressor,Food Machinery,Gas And Liquid Equipment
Brand
Huba Control
Media Type
Gas
Range Setting
100-900 mBAR G1/4
Electrical Connection
Threaded Terminal, 6.3 MM Flat Connector (AMP Connector)
Contact Material
plastic, brass and aluminium alloy, and NBR, FPM, EPDM and silicon diaphragm
Model Name/Number
625.6532
Power/Voltage
250 V AC
Weight
200 gm
Minimum Order Quantity
12
Pressure Connection
Inside thread M5, hose connector +- 6 mm, outside thread
Swiss Huba 625 Pressure Switch 625.6532
Swiss Huba 625 Pressure Switch 625.6532 Fulba Control Pressure Controller-100-900mbar
HUBA 625 Membrane Mechanical Pressure Switch It has 13 Pressure Ranges and is Suitable For Liquids And Gases. The Main Materials Can Be Plastic, Brass And Aluminium Alloy, and NBR, FPM, EPDM and Silicon Diaphragm Can be Selected. High Accuracy And Long-Term Stability Can Be Obtained By Fine Tuning Measurement Steps. Reinforcement Design is Especially Suitable For General Industrial Equipment Structure, Processing Technology And Food Automation. Technical Parameter
Relative Pressure-– 900-6000 mbar
Medium-Liquids And Gases
Maximum Overload Pressure-10 bar
Minimum Activation Pressure-2 mbar
Protection Level-IP54
Electrical Connectors-Threaded Terminal, 6.3 MM Flat Connector (AMP Connector)
DPT1-R8 Sensocon USA Range Differential Pressure Transmitter
Minimum Order Quantity
1 Number
Model Name/Number
DPT1-R8
Brand
Sensocon USA
Response Time
0.8 – 4.0,jumper selectable
Maximum Pressure
100 in w.c
Power Supply
24 VDC or VAC,+/- 10%
Enclosure Rating
IP 54/ NEMA 3
Display
3 1/2 Digit LCD Backlit LCD
Series DPT DPT1-R8 Range Differential Pressure Transmitter Series DPT Selectable Range Differential Pressure Transmitter The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for monitoring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4-20 mA or 0-10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication.
Technical Details:
DPT1-R8
Range 1
Range 2
Range 3
Range 4
Range 5
Range 6
Range 7
Range 8
inWC
-0.1 – 0.1
-0.25 – 0.25
-0.5 – .05
-1.0 – 01.0
0 – 0.1
0 – 0.25
0 – 0.5
0 – 1.0
Pa
-25 – 25
-62 – 62
-125 – 125
-250 – 250
0 – 25
0 – 62
0 – 125
0 – 250
mbar
-0.25 – 0.25
-0.62 – 0.62
-1.25 – 1.25
-2.5 – 2.5
0 – 0.25
0 – 0.62
0 – 1.25
0 – 2.5
mmWC
-2.5 – 2.5
-6.4 – 6.4
-12.7 – 12.7
-25.4 – 25.4
0 – 2.5
0 – 6.4
0 – 12.7
0-25.4
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.1-0.1 Inches wc
Minimum Order Quantity
1 Number
Model Number
DPT1-R8
Brand
Sensocon USA
Frequency Range
-0.1-0.1 Inches WC
Usage/Application
HVAC Industry
Response Time
0.8 – 4.0,Jumper Selectable
Electrical Connections
Screw Terminal Block
Display
3 1/2 Digit LCD Backlit LCD
Enclosure Rating
IP 54/ NEMA 3
Power Supply
24 VDC or VAC,+/- 10%
Media Compatibility
Dry Air Or Non-aggressive Gases
Maximum Pressure
100 in w.c.
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.1-0.1 Inches wc
Applications:
DPT-R8 series devices are commonly used in HVAC/R systems for – Fan, blower and filter monitoring – Pressure and flow monitoring – Valve and damper control – Pressure monitoring in clean room
Warning:
Read These Instructions Carefully Before Attempting To Install, Operate Or Service This Device..
Failure to observe safety information and comply with instructions could result in Personal Injury, Death And/ Or Property Damage
To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.
To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.
Retain these instructions for future reference.
This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.25-0.25 Inches wc
Minimum Order Quantity
1 Number
Model Number
DPT1-R8
Brand
Sensocon USA
Measuring Range
-0.25-0.25 Inches WC
Usage/Application
Pressure and Flow Monitoring – Valve and Damper Control – Pressure Monitoring in Clean Rooms
Response Time
0.8 – 4.0,jumper selectable
Maximum Pressure
100 in w.c.
Media Compatibility
Dry Air Or Non-aggressive Gases
Power Supply
24 VDC or VAC,+/- 10%
Enclosure Rating
IP 54/ NEMA 3
Display
3 1/2 Digit LCD Backlit LCD
Electrical Connections
Screw Terminal Block
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.25-0.25 Inches wc
DPT-R8 series devices are commonly used in HVAC/R systems for:
Fan, blower and filter monitoring
Pressure and flow monitoring
Valve and damper control
Pressure monitoring in clean rooms
Warning:
Read These Instructions Carefully Before Attempting To Install, Operate Or Service This Device.
Failure to observe safety information and comply with instructions could result in Personal Injury, Death And/ Or Property Damage.
To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.
To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.
Retain these instructions for future reference.
This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.5-.05 Inches wc
Minimum Order Quantity
1 Number
Model Number
DPT1-R8
Brand
Sensocon USA
Measuring Range
-0.5-.05 Inches WC
Usage/Application
Pressure and Flow Monitoring – Valve and Damper Control – Pressure Monitoring in Clean Rooms
Response Time
0.8 – 4.0,Jumper Selectable
Maximum Pressure
100 in w.c.
Media Compatibility
Dry Air Or Non-aggressive Gases
Power Supply
24 VDC or VAC,+/- 10%
Enclosure Rating
IP 54/ NEMA 3
Display
3 1/2 Digit LCD Backlit LCD
Electrical Connections
Screw Terminal Block
DPT1-R8 Sensocon USA Differential Pressure Transmitter Range -0.5-.05 Inches wc
Applications:
DPT-R8 series devices are commonly used in HVAC/R systems for – Fan, blower and filter monitoring – Pressure and flow monitoring – Valve and damper control – Pressure monitoring in clean rooms
Warning:
Read These Instructions Carefully Before Attempting To Install, Operate Or Service This Device.
Failure to observe safety information and comply with instructions could result in Personal Injury, Death And/ Or Property Damage.
To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use only wiring with insulation rated for full device operating voltage.
To avoid potential fire and/or explosion do not use in potentially flammable or explosive atmospheres.
Retain these instructions for future reference.
This product, when installed, will be part of an engineered system whose specifications and performance characteristics are not designed or controlled by Sensocon. Review applications and national and local codes to assure that the installation will be functional and safe. Use only experienced, knowledgeable, technicians to install this device.
The Series DX is a Differential Pressure Switch that makes a contact output based on the differential between two pressure sources. Wetted Materials of Brass and Fluoroelastomer are suitable for use with most Gases and Water-based solutions. Standard is a Weatherproof, UL type 4X, an enclosure for dust-laden, outdoor, or wash-down installation environments. Series DX incorporates an externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation. The DX uses opposing diaphragms to sense the high and low pressure with a pivot mechanism that transfers the difference of the two pressures to the SPDT Switch.
Product Applications:
Indicating Filter Differential Pressure. For example initiating Water Filter backwash as the filter becomes clogged on increasing Differential Pressure.Proof of flow indicator monitoring differential pressure from a sensing device. For example sensing the pressure across an orifice plate to prove water flow.Proving flow through a pump by sensing the pressure across the pump to make sure the pump does not run dry.Proving flow through a chiller. Often called evaporator water pressure drop.Proving flow through a heat pump or AC unit. Often called a condenser water lock-out switch.
Dwyer DXW-11-153-1 Differential Pressure Switch
Model Name/Number
DXW-11-153-1
Brand
Dwyer
Voltage
125/250 VAC or 30 VDC
Usage/Application
Industrial Process Monitoring
Product Weight
1 lb 3 oz (0.54 kg
Pressure Transmitters Type
Wet Differential Pressure Transmitter
The Series DX is a Differential Pressure Switch that makes a contact output based on the Differential Between Two Pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most Gases and Water Based Solutions. The Switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing Differential Pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing Differential Pressure. Unit features a high static pressure rating of 200 psig (13.8 bar). Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Externally Adjustable Set point, integral mounting flange and a removable electrical terminal block for Quick and Easy Installation.
Details: • Weather Proof Housing provides protection in the harsh,wet or dirty environments insuring switch’s long-service life • Removable Terminal Block Reduces Installation Time
Process Connection:1/4″ FNPT, Conduit Connection: 0.871″ Hole For 1/2″ Conduit Fitting; Electrical Connection: Removable Terminal Block
SENSOR TYPE:
Pressure Sensor
PRESSURE RANGE
0 – 100 psid
MAX TEMPERATURE
30 to 140°F
APPLICATIONS
For Indicating Filter Differential Pressure, Proof Of Flow Indicator Monitoring Differential Pressure From A Sensing Device, Proving Flow Through A Pump, Chiller and Heat Pump or AC Unit
Process Connection1/4″ FNPT, Conduit Connection 0.871″ Hole For 1/2″ Conduit Fitting; Electrical Connection Removable Terminal Block
Model Name/Number
DXW-11-153-2
Weight
1 lb 3 oz (0.54 kg
Mounting Type
Ports on horizontal plane, +-10 Degree.
The Series DX is a Differential Pressure Switch that makes a contact output based on the Differential Between two pressure sources. Wetted Materials of Brass and Flouroelastomer are suitable for use with most Gases and Water Based Solutions. The Switch can be used for low Differential Pressure Indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing Differential Pressure. Unit features a high static pressure rating of 200 psig (13.8 bar). Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation.
Details: • Weatherproof Housing Provides protection in the harsh, wet or dirty environments insuring switch’s long-service life • Removable Terminal Block Reduces Installation Time
Process Connection:1/4″ FNPT, Conduit Connection: 0.871″ Hole For 1/2″ Conduit Fitting; Electrical Connection: Removable Terminal Block
SENSOR TYPE:
Pressure Sensor
PRESSURE RANGE
200 psig
RELATIVE HUMIDITY RANGE
80%
MAX TEMPERATURE
30 to 140°F
FREQUENCY
5 – 500 Hz
APPLICATIONS
For Indicating Filter Differential Pressure, Proof Of Flow Indicator Monitoring Differential Pressure From A Sensing Device, Proving Flow Through A Pump, Chiller and Heat Pump or AC Unit
The Series DX is a Differential Pressure Switch that Makes a contact output based on the differential between two pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most gases and water based solutions. The switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. Unit features a high static pressure rating of 200 psig (13.8 bar). Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation.
Details: • Weatherproof housing provides protection in the harsh, wet or dirty environments insuring switch’s long-service life • Removable terminal block reduces installation time
Process Connection:1/4″ FNPT, Conduit Connection: 0.871″ Hole For 1/2″ Conduit Fitting; Electrical Connection: Removable Terminal Block
SENSOR TYPE:
Pressure Sensor
PRESSURE RANGE
200 psig
RELATIVE HUMIDITY RANGE
80%
MAX TEMPERATURE
30 to 140°F
FREQUENCY
5 – 500 Hz
APPLICATIONS
For Indicating Filter Differential Pressure, Proof Of Flow Indicator Monitoring Differential Pressure From A Sensing Device, Proving Flow Through A Pump, Chiller and Heat Pump or AC Unit
The Series DX is a Differential Pressure Switch that makes a contact output based on the differential between two pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most gases and water based solutions. The switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. Unit features a high static pressure rating of 200 psig (13.8 bar). Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation.
Details: • Weatherproof Housing provides protection in the harsh, wet or dirty environments insuring Switch’s Long-Service Life • Removable Terminal Block Reduces Installation Time
Process Connection:1/4″ FNPT, Conduit Connection: 0.871″ Hole For 1/2″ Conduit Fitting; Electrical Connection: Removable Terminal Block
SENSOR TYPE:
Pressure Sensor
PRESSURE RANGE
200 psig
RELATIVE HUMIDITY RANGE
80%
MAX TEMPERATURE
30 to 140°F
FREQUENCY
5 – 500 Hz
APPLICATIONS
For Indicating Filter Differential Pressure, Proof Of Flow Indicator Monitoring Differential Pressure From A Sensing Device, Proving Flow Through A Pump, Chiller and Heat Pump or AC Unit
The Series DCT600 Timer Controller is a timing system for pulse-jet type dust collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of ±1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Product Applications
Dust Collection
Pneumatic Conveying
Models & Ordering
Model Description
DCT604 Timer Controller, 4 Channels.
DCT606 Timer Controller, 6 Channels.
DCT610 Timer Controller, 10 Channels.
DCT622 Timer Controller, 22 Channels.
DCT632 Timer Controller, 32 Channels.
Specifications
Output Channels:4, 6, 10, 22 and 32 Channels Available.
Power Requirements:85 to 270 VAC.
Power Consumption:1.2 W.
Solenoid Supply:300 VA.
Fuse:Type 3 AG, 3 A @ 250 VAC.
Temperature Limits:-40 to 140°F (-40 to 60°C).
Storage Temperature Limits:-40 to 176°F (-40 to 80°C).
On Time:50 msec to 500 msec.
On Time Accuracy:±5% of setting.
On Time Stability:±1 msec.
Off Time:1 second to 180 seconds.
Off Time Accuracy:5% of setting.
Weight:9 oz (255 g).
Agency Approvals:CE, cUL, UL.
*Additional Specifications on IOM.
Features
Better synchronized on-time pulse to the power line for better pulse stability
Adjustable potentiometers to select time-on and time-off settings
Simple and easy to use design
Options
L-Mounting Bracket for Field Retrofits (4 thru 10 channel only): 8-1/4″ x 6-1/4″ (209.55 x 158.75 mm)
WP-Weatherproof Housing
Related Products
Series RSV Pilot Solenoid Valve
Series BHC Bulk Head Connectors
Series DCV/RDCV Diaphragm Valve
Series CLS2 Capacitive Level Switch
Series PLS Paddle Level Switch
Series PMT Particulate Transmitter
Series DH3 Digihelic® Differential Pressure Controller
Dwyer DCT604 Timer Controller
Minimum Order Quantity
12 Number
Brand
DWYER USA
Model No.
Dwyer DCT604
Accuracy
5% of setting
Voltage
85 to 270 VAC
Country of Origin
Made in India
Power Consumption
1.2 W
Weight:
9 oz (255 g)
Dwyer DCT604 Timer Controller
Dwyer Instruments DCT604
Timer Controller 4 Channels
Order #: DCT604
Mfg #: DCT604
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
4 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
Solenoid Supply: 300 VA
Fuse: Type 3 AG, 3 A @ 250 VAC
Temperature Limits: -40 to 140°F (-40 to 60°C)
On Time: 50 msec to 500 msec
On Time Accuracy: ±5% of setting
On Time Stability: ±1 msec
Off Time: 1 second to 180 seconds
Off Time Accuracy: 5% of setting
General Specifications
Power Requirements: 85 to 270 VAC
Power Consumption: 1.2 W
Weight: 9 oz (255 g)
Dwyer DCT622 Timer Controller
Minimum Order Quantity
1 Number
Brand
DWYER USA
Model No.
Dwyer DCT622
Size
Available in Either 4, 6, 10, 22 or 32 Channels
Accuracy
5% of setting
Voltage
85 to 270 VAC
Country of Origin
Made in India
Fuse
Type 3 AG, 3 A @ 250 VAC
Output Channels
4, 6, 10, 22 and 32 channels available
Power Requirements
85 to 270 VAC
Power Consumption
1.2 W
Weight
9 oz (255 g)
Dwyer DCT622 Timer Controller
Dwyer Instruments DCT622
Timer Controller 22 Channels
Order #: DCT622
Mfg #: DCT622
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
22 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
Solenoid Supply: 300 VA
Fuse: Type 3 AG, 3 A @ 250 VAC
Temperature Limits: -40 to 140°F (-40 to 60°C)
On Time: 50 msec to 500 msec
On Time Accuracy: ±5% of setting
On Time Stability: ±1 msec
Off Time: 1 second to 180 seconds
Off Time Accuracy: 5% of setting
General Specifications
Power Requirements: 85 to 270 VAC
Power Consumption: 1.2 W
Weight: 9 oz (255 g)
Dwyer DCT606 Timer Controller
Minimum Order Quantity
1 Number
Brand
DWYER USA
Model No.
Dwyer DCT606
Size
Available in Either 4, 6, 10, 22 or 32 Channels
Accuracy
5% of setting
Voltage
85 to 270 VAC
Country of Origin
Made in India
Fuse
Type 3 AG, 3 A @ 250 VAC
Output Channels
4, 6, 10, 22 and 32 channels available
Power Requirements
85 to 270 VAC
Power Consumption
1.2 W
Weight
9 oz (255 g)
Dwyer DCT606 Timer Controller
Dwyer Instruments DCT606
Timer Controller 6 Channels
Order #: DCT606
Mfg #: DCT606
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
6 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
Solenoid Supply: 300 VA
Fuse: Type 3 AG, 3 A @ 250 VAC
Temperature Limits: -40 to 140°F (-40 to 60°C)
On Time: 50 msec to 500 msec
On Time Accuracy: ±5% of setting
On Time Stability: ±1 msec
Off Time: 1 second to 180 seconds
Off Time Accuracy: 5% of setting
General Specifications
Power Requirements: 85 to 270 VAC
Power Consumption: 1.2 W
Weight: 9 oz (255 g)
Dwyer DCT610 Timer Controller
Minimum Order Quantity
1 Number
Brand
DWYER USA
Usage/Application
Dust Collection,Pneumatic Conveying
Rated Voltage
85 to 270 VAC
Model Name/Number
Dwyer DCT610
Keyboard Type
Dwyer DCT610 Timer Controller
Timer Type
Analog
Size
Available in Either 4, 6, 10, 22 or 32 Channels
Weight
9 oz (255 g)
Accuracy
5% of setting
Voltage
85 to 270 VAC
I Deal In
New Only
Country of Origin
Made in India
Fuse
Type 3 AG, 3 A @ 250 VAC
Output Channels
4, 6, 10, 22 and 32 channels available
Power Requirements
85 to 270 VAC
Power Consumption
1.2 W
Dwyer DCT610 Timer Controller
Dwyer Instruments DCT610
Timer Controller 10 Channels
Order #: DCT610
Mfg #: DCT610
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
10 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
Solenoid Supply: 300 VA
Fuse: Type 3 AG, 3 A @ 250 VAC
Temperature Limits: -40 to 140°F (-40 to 60°C)
On Time: 50 msec to 500 msec
On Time Accuracy: ±5% of setting
On Time Stability: ±1 msec
Off Time: 1 second to 180 seconds
Off Time Accuracy: 5% of setting
General Specifications
Power Requirements: 85 to 270 VAC
Power Consumption: 1.2 W
Weight: 9 oz (255 g)
Dwyer DTC632 Timer Controller
Minimum Order Quantity
1 Number
Brand
DWYER USA
Usage/Application
Dust Collection,Pneumatic Conveying
Rated Voltage
85 to 270 VAC
Model Name/Number
Dwyer DTC632
Timer Type
Analog
Size
Available in Either 4, 6, 10, 22 or 32 Channels
Accuracy
5% of setting
Voltage
85 to 270 VAC
I Deal In
New Only
Country of Origin
Made in India
Fuse
Type 3 AG, 3 A @ 250 VAC
Output Channels
4, 6, 10, 22 and 32 channels available
Power Requirements
85 to 270 VAC
Power Consumption
1.2 W
Dwyer DCT632 Timer Controller
Dwyer Instruments DCT632
Timer Controller 32 Channels
Order #: DCT632
Mfg #: DCT632
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
32 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
Register to View Exclusive Member PricingThe Series DCT600 Timer Controller is a timing system for pulse-jet type Dust Collectors or pneumatic conveying systems in either continuous or on-demand cleaning applications. It provides either 4, 6, 10, 22 or 32 channels. The DCT600 was designed for ease of installation in your dust collector system. For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel. Time-on and time-off settings are selected using two potentiometers. High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode. The new enhanced board circuitry of the DCT600 synchronizes the on-time pulse to the power line to achieve a pulse stability of +/- 1 msec. For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line. Availability: Ships in 5-6 weeks Product Highlights
32 Channels
Dwyer DCT600 Series Offers
Features
Available in Either 4, 6, 10, 22 or 32 Channels
Designed for ease of installation in your dust collector system
For installations requiring fewer channels than available on the board, a shorting plug (DCT604 & DCT610) or dip switches (DCT622 & DCT632) allows selection of the last used channel
Time-on and time-off settings are selected using two potentiometers
High-limit and low-limit control inputs are provided for use with on-demand systems. Units can also work in continuous clean mode
For safety, the control circuitry including the control inputs and the last channel jumper is isolated from the power line
Functional Specifications
Output Channels: 4, 6, 10, 22 and 32 channels available
-1 to 40 bar /-30 inHg to 600 PSI Pneumatic Pressure and Vacuum
FEATURES
Dual Source Of Pneumatic Pressure and Vacuum.
Fully Portable Hand Operated Unit Supplied as a Complete Kit.
Generating up to 40 bar / 600 PSI Pressure or 96% Vacuum.
Adjustable Stroke To Provide Over Pressure Protection.
Quick fit instruments are Available to Use With The System Including Electronic Calibrators,
Digital Indicators and Analogue Gauges.
The TP1-40 is Supplied in a Light, High Quality Carrying Case, with Adaptors, a Set of Washers, Seals and Provision for Additional Instruments.
The TP1- 40 Pressure Test System has been introduced to complement an already extensive range of Pressure Calibration Products and Can be Used for Calibration Checks on Pressuretransmitters, Pressure Switches, indicators, Recorders and Controllers.
Calibration Checks can be Carried Out Simply by Temporarily Shutting off Line Pressure, Selecting the Digital Indicator or Test Gauge Required and Connecting The Instrument Via The Flexible Hose and Swivel Adaptor to The Pressure Measuring Instrument to Be Checked. The Range of Adaptors Enables Connection to Most Gauge Threads. TP1- 40 Can Be Used as a Portable Pressure Comparator in Conjunction With Various Pressure Indicating Devices. This Precision Unit includes an Adjustable Over Pressure Protection System as Standard. TP1 Specifications
Key:
1. Pressure port – 3/8″ BSP Parallel Female Connection To Take Master Instruments E.G. Digital Or Analogue Gauge, PC6 PRO Calibrator 2. Fine Adjustment Valve. 3. Pressure Release Valve. 4. Pressure / Vacuum Selector 5. Adjustable Stroke for Varying Maximum Pressureoutput (Over Pressure Protection). 6. BSP or NPT Adaptor Set 7. Flexible Hose To Item Under Test. 8. Nylon Seals for BSP Adaptors ( See Seal Kit Provided ) DO NOT Use ”PTFE” Tape For Sealing With Parallel Threads 9. Knurled ‘Quick-Fit’ Connectors 10. Pump Handles Specification
Output Pressure:0 to 40 bar / 0 to 600 psi (Adjustable)
Output Vacuum:96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
-1 to 40 bar /-30 inHg to 600 PSI Pneumatic Pressure and Vacuum
FEATURES
Dual Source Of Pneumatic Pressure and Vacuum.
Fully Portable Hand Operated Unit Supplied as a Complete Kit.
Generating up to 40 bar / 600 PSI Pressure or 96% Vacuum.
Adjustable Stroke To Provide Over Pressure Protection.
Quick fit instruments are Available to Use With The System Including Electronic Calibrators,
Digital Indicators and Analogue Gauges.
The TP1-40 is Supplied in a Light, High Quality Carrying Case, with Adaptors, a Set of Washers, Seals and Provision for Additional Instruments.
The TP1- 40 Pressure Test System has been introduced to complement an already extensive range of Pressure Calibration Products and Can be Used for Calibration Checks on Pressuretransmitters, Pressure Switches, indicators, Recorders and Controllers.
Calibration Checks can be Carried Out Simply by Temporarily Shutting off Line Pressure, Selecting the Digital Indicator or Test Gauge Required and Connecting The Instrument Via The Flexible Hose and Swivel Adaptor to The Pressure Measuring Instrument to Be Checked. The Range of Adaptors Enables Connection to Most Gauge Threads. TP1- 40 Can Be Used as a Portable Pressure Comparator in Conjunction With Various Pressure Indicating Devices. This Precision Unit includes an Adjustable Over Pressure Protection System as Standard. TP1 Specifications
Key:
1. Pressure port – 3/8″ BSP Parallel Female Connection To Take Master Instruments E.G. Digital Or Analogue Gauge, PC6 PRO Calibrator 2. Fine Adjustment Valve. 3. Pressure Release Valve. 4. Pressure / Vacuum Selector 5. Adjustable Stroke for Varying Maximum Pressureoutput (Over Pressure Protection). 6. BSP or NPT Adaptor Set 7. Flexible Hose To Item Under Test. 8. Nylon Seals for BSP Adaptors ( See Seal Kit Provided ) DO NOT Use ”PTFE” Tape For Sealing With Parallel Threads 9. Knurled ‘Quick-Fit’ Connectors 10. Pump Handles Specification
Output Pressure:0 to 40 bar / 0 to 600 psi (Adjustable)
Output Vacuum:96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
TP1- 40 :Hand Held Pressure Test System in Rigid Carrying Case With 1 Metre Flexible Hose and Adaptor Set
PC6, PC6-PRO,:A Range of Pressure Calibrators Available Between -1 and 40 bar / -30 inHg and 600 psi
PC6-IS, PC6-AV
DTG-2K :A Range of Digital Indicators up to 30 bar (450psi)
TPG Range: A Range of Analogue Gauges Between -1 and 40 bar / -30 inHg and 600 psi
TPK1 :Service Kit Containing a set of seals. ”O” rings, retaining screws and allen key
LTPA-BSP-QF:Set of 7 BSP ‘quick-fit’ adaptors
LTPA-NPT-QF:Set of 6 NPT ‘quick-fit’ adaptors
SI Pressure TP1-40-K Pneumatic Hand Pump Kit
Minimum Order Quantity
1 Piece
Brand
SI PRESSURE INSSTRRUMENTS
Part Number
TP1-40-K
Material
Stainless Steel
Model Name/Number
TP1-40-K
Usage/Application
Industrial
Country of Origin
Made in India
SI Pressure TP1-40-K Pneumatic Hand Pump Kit
SI Pressure TP1-40-K Pneumatic Hand Pump Kit provide -28 in Hg Vacuum to 600 psi DESCRIPTION
The SI Pressure TP1-40-K Pneumatic Hand Pump Generates Pressure up to 600 psi or -28″Hg. Made With No Plastic Parts, SI Pressure TPI1-40-K Pneumatic Hand Pumps are designed to endure harsh environments unlike the competition’s disposable models.
The Hand-Held SI Pressure TP1-40-K Pneumatic Hand Pump Supplies Pressure and Vacuum Generation with exceptional fine-tuning adjustments or stroke adjustments. These Hand Pumps are ideal for use with electronic calibrators, Digital indicators, Analog Gauges, Pressure Transmitters, transducers, relief valves, or similar instrumentation. The Rugged and Reliable Design of the SI Pressure TP1-40-K Pneumatic Hand Pump assures no leaks. With the fewest strokes to maximum pressure, SI Pressure TP1-40-K Pneumatic Hand Pumps are the most efficient hand pumps on the Market with the Fewest Strokes to Maximum Pressure. MORE INFORMATION
Weight : 2.000000
Product Includes : Hand Pump, Hose, Fittings, and Carrying Case
Specifications
Output Pressure: 0 to 600 psi (Adjustable)
Output Vacuum: 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
The Series PCHP Pneumatic Hand Pump comfortably sources pressure and vacuum to check calibration of gages, switches, transmitters, and recorders. The contoured cushion handles provide extra comfort while preventing the pump from sliding. The oversized check valve provides smooth operation throughout the output range. The dual o-rings on all pistons ensure zero leakage.
Other Details:
Model Description
PCHP-1 Pneumatic Hand Pump, Range 600 psi. PCHP-1K Pneumatic Hand Pump, Range 600 psi, with hose kit.PCHP-HK High Pressure Hose For PCHP-1 Hand Pump.
Pneumatic Hand Pump
Minimum Order Quantity
1 Number
Brand
SI PREESSURE INSTRUMENTS
Material
Stainless Steel
Model Name/Number
TP1-40
Pump Type
Pneumatic Hand Pump
Output
0 to 40 bar / 0 to 600 psi (Adjustable)
Country of Origin
Made in India
Output Vacuum
96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
-1 to 40 bar /-30 inHg to 600 PSI Pneumatic Pressure and Vacuum
FEATURES
Dual Source Of Pneumatic Pressure and Vacuum.
Fully Portable Hand Operated Unit Supplied as a Complete Kit.
Generating up to 40 bar / 600 PSI Pressure or 96% Vacuum.
Adjustable Stroke To Provide Over Pressure Protection.
Quick fit instruments are Available to Use With The System Including Electronic Calibrators,
Digital Indicators and Analogue Gauges.
The TP1-40 is Supplied in a Light, High Quality Carrying Case, with Adaptors, a Set of Washers, Seals and Provision for Additional Instruments.
The TP1- 40 Pressure Test System has been introduced to complement an already extensive range of Pressure Calibration Products and Can be Used for Calibration Checks on Pressuretransmitters, Pressure Switches, indicators, Recorders and Controllers.
Calibration Checks can be Carried Out Simply by Temporarily Shutting off Line Pressure, Selecting the Digital Indicator or Test Gauge Required and Connecting The Instrument Via The Flexible Hose and Swivel Adaptor to The Pressure Measuring Instrument to Be Checked. The Range of Adaptors Enables Connection to Most Gauge Threads. TP1- 40 Can Be Used as a Portable Pressure Comparator in Conjunction With Various Pressure Indicating Devices. This Precision Unit includes an Adjustable Over Pressure Protection System as Standard. TP1 Specifications
Key:
1. Pressure port – 3/8″ BSP Parallel Female Connection To Take Master Instruments E.G. Digital Or Analogue Gauge, PC6 PRO Calibrator 2. Fine Adjustment Valve. 3. Pressure Release Valve. 4. Pressure / Vacuum Selector 5. Adjustable Stroke for Varying Maximum Pressureoutput (Over Pressure Protection). 6. BSP or NPT Adaptor Set 7. Flexible Hose To Item Under Test. 8. Nylon Seals for BSP Adaptors ( See Seal Kit Provided ) DO NOT Use ”PTFE” Tape For Sealing With Parallel Threads 9. Knurled ‘Quick-Fit’ Connectors 10. Pump Handles Specification
Output Pressure:0 to 40 bar / 0 to 600 psi (Adjustable)
Output Vacuum:96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
TP1- 40 :Hand Held Pressure Test System in Rigid Carrying Case With 1 Metre Flexible Hose and Adaptor Set
PC6, PC6-PRO,:A Range of Pressure Calibrators Available Between -1 and 40 bar / -30 inHg and 600 psi
PC6-IS, PC6-AV
DTG-2K :A Range of Digital Indicators up to 30 bar (450psi)
TPG Range: A Range of Analogue Gauges Between -1 and 40 bar / -30 inHg and 600 psi
TPK1 :Service Kit Containing a set of seals. ”O” rings, retaining screws and allen key
LTPA-BSP-QF:Set of 7 BSP ‘quick-fit’ adaptors
LTPA-NPT-QF:Set of 6 NPT ‘quick-fit’ adaptors
SI Pressure Instruments TP1-40-K
Minimum Order Quantity
1 Number
Usage/Application
Calibration
Display Type
Analog
Color
Black
Brand
SI PREESSURE INSTRUMENTS
Packaging Type
1 BOX
Country of Origin
Made in India
SI Pressure Instruments TPI-40-K
Hand-Held Pressure Or Vacuum Generation
Low-Cost Way To Verify Performance Of Pressure Instrumentation
Rugged and Reliable Design
Fine Adjustment Control
The Most Efficient Pumps Available
Specifications & Description
Description(SI Pressure) TP1 Pneumatic Pump Kit, Vacuum to 600 psi
MORE ABOUT THIS ITEM
These Pumps Are Ideal for use With Electronic Calibrators, Digital Indicators, Analog Gauges, Pressure Transmitters, Transducers, Relief Valves, or similar instrumentation. The rugged and reliable design of these pumps and the fine adjustment controls added to their design provides a low cost way to verify the performance of pressure instrumentation. Pumps can be purchased independently, or in a kit including carrying case, NPT adapters, seals and hoses. The SHTP1 hydraulic pump is currently the only hand pump capable of generating pressure up to 15,000 psi, utilizing hydraulic oil, Skydrol or distilled water. The pump includes a unique high pressure or priming selector on the scissor action pump mechanism, making pressure generation above 5,000 psi easier. The STP1 pneumatic pump generates pressure to 600 psi and vacuum to 28”Hg on the same unit. Made with no plastic parts these pumps are designed to endure harsh environments unlike our competitor’s disposable models. The SLTP1 pneumatic pump also acts as a dual source of pressure and vacuum over smaller ranges making very fine adjustments easier. The SLTP1 range is 25”Hg vacuum to 30 psi, with 0.00145 psi sensitivity.
Pressure Test System TP1-40
Minimum Order Quantity
1 Piece
Material
Stainless Steel
Brand
SI PREESSURE INSTRUMENTS
Country of Origin
Made in India
Output Pressure
0 to 40 bar / 0 to 600 psi (Adjustable)
Output Vacuum
96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
-1 to 40 bar /-30 inHg to 600 psi Pneumatic Pressure and Vacuum
FEATURES
Dual source of pneumatic pressure and vacuum.
Fully portable hand operated unit supplied as a complete kit.
Generating up to 40 bar / 600 psi pressure or 96% vacuum.
Adjustable stroke to provide over pressure protection.
Quick fit instruments are available to use with the system including electronic calibrators,
digital indicators and analogue gauges.
The TP1-40 is supplied in a light, high quality carrying case, with adaptors, a set of washers, seals and provision for additional instruments.
The TP1- 40 Pressure Test System has been introduced to complement an already extensive range of pressure calibration products and can be used for calibration checks on pressuretransmitters, pressure switches, indicators, recorders and controllers. Calibration checks can be carried out simply by temporarily shutting off line pressure, selecting the digital indicator or test gauge required and connecting the instrument via the flexible hose and swivel adaptor to the pressure measuring instrument to be checked. The range of adaptors enables connection to most gauge threads. TP1- 40 can be used as a portable Pressure Comparator in conjunction with various pressure indicating devices. This precision unit includes an adjustable over pressure protection system as standard. TP1 Specifications
Key:
1. Pressure port – 3/8″ BSP Parallel female connection to take master instruments e.g. digital or analogue gauge, PC6 PRO Calibrator2. Fine adjustment valve.3. Pressure release valve.4. Pressure / Vacuum selector5. Adjustable stroke for varying maximum pressureoutput (over pressure protection).6. BSP or NPT adaptor set7. Flexible hose to item under test.8. Nylon seals for BSP adaptors ( see seal kit provided )DO NOT use ‘PTFE’ tape for sealing with parallel threads9. Knurled ‘quick-fit’ connectors10. Pump Handles Specification
Output Pressure:0 to 40 bar / 0 to 600 psi (Adjustable)
Output Vacuum:96% (0 to -0.960 bar / 0 to -29 in Hg (Adjustable) at 1000 mbar ambient)
Galaxy Digital Pressure Gauge PCM580 Range -1 To 1 Bar
Minimum Order Quantity
12 Piece
Dial Size
4 inch / 100 mm
Battery Life
2 Triple A Batteries
Brand
Galaxy
Pressure Range
-1 To 1 Bar
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Galaxy Digital Pressure Gage PCM580 Range -1 To 1 Bar
PCM580 Digital Pressure Gauge (Φ80 MM) Features
4 Digits LCD Showing Pressure Accurately in Real Time,Easy For Observation
Various Pressure Units,Zero Clearing,Backlight,On/Off Functions
Battery Powered,Low-Power Design,Keeping Working For 12 Months
High-Precision Pressure Sensor Adopted
Application
Machinery and Electronics
Supporting Equipment Of Instruments
Pressure Laboratory
Mechanical Engineering Automation
PCM580 Piezoresistive Silicon LCD Display Battery Digital Pressure Gauge, Φ80mm Digital Pressure Manometer
PCM580 Piezoresistive Silicon Digital Pressure Gauge (Φ80mm) Ranges -100kPa-100MPa With Gauge Pressure,Absolute Pressure, Sealed Gauge Pressure.The Accuracy is 0.5% or 0.25%. It Has Large LCD Display With 4 Digits,Applicable To Portable Pressure Measurement,Equipment Support And Calibration.
Galaxy Digital Pressure Gage PCM580 RANGE 0 TO 160 BAR
Minimum Order Quantity
12 Number
Brand
Galaxy
Battery Life
2 Triple A batteries
Pressure Range
0 TO 160 BAR
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Galaxy Digital Pressure Gage PCM580 RANGE 0 TO 160 BAR
Digital Pressure Gauge
Overview PCM580 is a high-precision intelligent Digital Pressure Gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a large size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate.Thehousingandconnectorof PCM580 aremadeofstainlesssteel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel. PCM580 is Applicable to Portable Pressure Measurement and Equipment Supporting and Calibration Fields
Notes:
Do Not Misusedocumentation.
The Information Presented in This Product Sheet is for Reference Only. Do Not Use This Document as a Product installationguide.
Complete installation, operation, and maintenance information is provided in the instructions of theproduct.
Misuse of the product may cause danger or personalinjury.
Features
Digital Pressure Gauge
4 Digits LCD Showing Pressure Accurately in Real Time, Easy Forobservation
Various Pressure units, zero clearing, backlight, on/off functions
Battery powered, low-power design, keeping working for 12months
High-precision pressure sensoradopted
Application
Machinery andelectronics
Supporting equipment of instruments
Pressurelaboratory
Mechanical engineering automation
Notes:
Do not touch the diaphragm with hard objects, which may cause damage to thediaphragm.
Please read the Instruction Manual of the product carefully before installation and check the relevant information of theproduct.
Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
Misuse of the product maycausedanger or personal injury.
Electric Protection-Anti Electromagnetic Interference Design
Sampling Frequency-5/sec
Overpressure-150%FS
Long Term Stability-±0.2%FS/Year (Typical)
Supply Battery – 2 Triple A Batteries
Material-Stainless Steel For Shell, 316L For Isolation Diaphragm
Medium Compatibility – All Media Compatible With Stainless Steel 316
Note: Common Threads Are M20×1.5, G1/4, G1/2, M14×1.5, NPT1/4 And NPT1/2. Special Threads Can Be Customized For Batch Order.
Note: G Stands For Gauge Pressure, S, Sealed Gauge Pressure.
Galaxy Digital Pressure Gage PCM580 RANGE -1 TO 40 BAR
Minimum Order Quantity
12 Number
Battery Life
2 Triple A Batteries
Brand
Galaxy
Display Digits
4 Digits LCD
Digit Size
4 Digits LCD
Pressure Range
-1 TO 40 BAR
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Mounting
Bottom
Material of casing
Stainless Steel For Shell, 316L For Isolation Diaphragm
Model Name/Number
PCM580
Accuracy Class
1
Medium Temperature
10~70 DegreeC
Galaxy Digital Pressure Gage PCM580 RANGE -1 TO 40 BAR
Digital Pressure Gauge
Overview PCM580 is a High-Precision Intelligent Digital Pressure Gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a Large Size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate.Thehousingandconnectorof PCM580 aremadeofstainlesssteel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel. PCM580 is Applicable to Portable Pressure Measurement and Equipment Supporting and Calibration Fields
Notes:
Do Not Misusedocumentation.
The Information Presented in This Product Sheet is for Reference Only. Do Not Use This Document as a Product installationguide.
Complete installation, operation, and maintenance information is provided in the instructions of theproduct.
Misuse of the product may cause danger or personalinjury.
Features
Digital Pressure Gauge
4 Digits LCD Showing Pressure Accurately in Real Time, Easy Forobservation
Various Pressure units, zero clearing, backlight, on/off functions
Battery powered, low-power design, keeping working for 12months
High-precision pressure sensoradopted
Application
Machinery andelectronics
Supporting equipment of instruments
Pressurelaboratory
Mechanical engineering automation
Notes:
Do not touch the diaphragm with hard objects, which may cause damage to thediaphragm.
Please read the Instruction Manual of the product carefully before installation and check the relevant information of theproduct.
Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
Misuse of the product maycausedanger or personal injury.
Electric Protection-Anti Electromagnetic Interference Design
Sampling Frequency-5/sec
Overpressure-150%FS
Long Term Stability-±0.2%FS/Year (Typical)
Supply Battery – 2 Triple A Batteries
Material-Stainless Steel For Shell, 316L For Isolation Diaphragm
Medium Compatibility – All Media Compatible With Stainless Steel 316
Note: Common Threads Are M20×1.5, G1/4, G1/2, M14×1.5, NPT1/4 And NPT1/2. Special Threads Can Be Customized For Batch Order.
Note: G Stands For Gauge Pressure, S, Sealed Gauge Pressure.
Galaxy Digital Pressure Gage PCM580 RANGE 0 TO 1000 BAR
Minimum Order Quantity
12 Number
Battery Life
2 Triple A Batteries
Brand
Galaxy
Display Digits
4 Digits LCD
Digit Size
80 MM
Pressure Range
0 TO 1000 BAR
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Mounting
Bottom
Material of casing
Stainless Steel For Shell, 316L For Isolation Diaphragm
Model Name/Number
PCM580
Wetted Parts
Stainless Steel
Galaxy Digital Pressure Gage PCM580 RANGE 0 TO 1000 BAR
Digital Pressure Gauge
Overview PCM580 is a High-Precision Intelligent Digital Pressure Gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a Large Size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate.Thehousingandconnectorof PCM580 aremadeofstainlesssteel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel. PCM580 is Applicable to Portable Pressure Measurement and Equipment Supporting and Calibration Fields
Notes:
Do Not Misusedocumentation.
The Information Presented in This Product Sheet is for Reference Only. Do Not Use This Document as a Product installationguide.
Complete installation, operation, and maintenance information is provided in the instructions of theproduct.
Misuse of the product may cause danger or personalinjury.
Features
Digital Pressure Gauge
4 Digits LCD Showing Pressure Accurately in Real Time, Easy Forobservation
Various Pressure units, zero clearing, backlight, on/off functions
Battery powered, low-power design, keeping working for 12months
High-precision pressure sensoradopted
Application
Machinery andelectronics
Supporting equipment of instruments
Pressurelaboratory
Mechanical engineering automation
Notes:
Do not touch the diaphragm with hard objects, which may cause damage to thediaphragm.
Please read the Instruction Manual of the product carefully before installation and check the relevant information of theproduct.
Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
Misuse of the product maycausedanger or personal injury.
Electric Protection-Anti Electromagnetic Interference Design
Sampling Frequency-5/sec
Overpressure-150%FS
Long Term Stability-±0.2%FS/Year (Typical)
Supply Battery – 2 Triple A Batteries
Material-Stainless Steel For Shell, 316L For Isolation Diaphragm
Medium Compatibility – All Media Compatible With Stainless Steel 316
Note: Common Threads Are M20×1.5, G1/4, G1/2, M14×1.5, NPT1/4 And NPT1/2. Special Threads Can Be Customized For Batch Order.
Note: G Stands For Gauge Pressure, S, Sealed Gauge Pressure.
Galaxy Digital Pressure Gage Pcm580 Range 0 To 70 Bar
Minimum Order Quantity
12 Number
Brand
Galaxy
Battery Life
2 Triple A Batteries
Display Digits
4 Digits LCD
Digit Size
80 MM
Pressure Range
0 TO 70 BAR
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Mounting
Bottom
Material of casing
Stainless Steel For Shell, 316L For Isolation Diaphragm
Model Name/Number
PCM580
Pointer Material
Stainless Steel
Galaxy Digital Pressure Gage PCM580 RANGE 0 TO 70 BAR
Digital Pressure Gauge
Overview PCM580 is a High-Precision Intelligent Digital Pressure Gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a Large Size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate.Thehousingandconnectorof PCM580 aremadeofstainlesssteel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel. PCM580 is Applicable to Portable Pressure Measurement and Equipment Supporting and Calibration Fields
Notes:
Do Not Misusedocumentation.
The Information Presented in This Product Sheet is for Reference Only. Do Not Use This Document as a Product installationguide.
Complete installation, operation, and maintenance information is provided in the instructions of theproduct.
Misuse of the product may cause danger or personalinjury.
Features
Digital Pressure Gauge
4 Digits LCD Showing Pressure Accurately in Real Time, Easy Forobservation
Various Pressure units, zero clearing, backlight, on/off functions
Battery powered, low-power design, keeping working for 12months
High-precision pressure sensoradopted
Application
Machinery andelectronics
Supporting equipment of instruments
Pressurelaboratory
Mechanical engineering automation
Notes:
Do not touch the diaphragm with hard objects, which may cause damage to thediaphragm.
Please read the Instruction Manual of the product carefully before installation and check the relevant information of theproduct.
Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
Misuse of the product maycausedanger or personal injury.
Electric Protection-Anti Electromagnetic Interference Design
Sampling Frequency-5/sec
Overpressure-150%FS
Long Term Stability-±0.2%FS/Year (Typical)
Supply Battery – 2 Triple A Batteries
Material-Stainless Steel For Shell, 316L For Isolation Diaphragm
Medium Compatibility – All Media Compatible With Stainless Steel 316
Note: Common Threads Are M20×1.5, G1/4, G1/2, M14×1.5, NPT1/4 And NPT1/2. Special Threads Can Be Customized For Batch Order.
Note: G Stands For Gauge Pressure, S, Sealed Gauge Pressure.
Galaxy Digital Pressure Gage PCM580 Range -1 To 6 Bar
Minimum Order Quantity
12 Number
Brand
Galaxy
Pressure Range
-1 to 6 bar
Use
HVAC Systems
Display Type
Digital
Pressure Type
Differential Pressure
Connection Type
NPT
Connection Size
1/4 inch
Dial Type
Dry
Mounting
Bottom
Model Name/Number
PCM580
Pointer Material
Stainless Steel
Wetted Parts
Stainless Steel
Country of Origin
Made in India
Galaxy Digital Pressure Gage PCM580 Range -1 To 6 Bar
Digital Pressure Gauge
Overview PCM580 is a High-Precision Intelligent Digital Pressure Gauge. It has a high-precision sensor and displays pressure accurately in real time. It has advantages of high precision and good long term stability. PCM580 is equipped with a Large Size LCD, featuring with functions of zero clearing, backlight, on/off button, units switching and low pressure alarm. It is convenient to install and easy to operate.Thehousingandconnectorof PCM580 aremadeofstainlesssteel 304 with excellent vibration resistance. It can be used to measure gas, liquid, oil and other non-corrosive medium of stainless steel. PCM580 is Applicable to Portable Pressure Measurement and Equipment Supporting and Calibration Fields
Notes:
Do Not Misusedocumentation.
The Information Presented in This Product Sheet is for Reference Only. Do Not Use This Document as a Product installationguide.
Complete installation, operation, and maintenance information is provided in the instructions of theproduct.
Misuse of the product may cause danger or personalinjury.
Features
Digital Pressure Gauge
4 Digits LCD Showing Pressure Accurately in Real Time, Easy Forobservation
Various Pressure units, zero clearing, backlight, on/off functions
Battery powered, low-power design, keeping working for 12months
High-precision pressure sensoradopted
Application
Machinery andelectronics
Supporting equipment of instruments
Pressurelaboratory
Mechanical engineering automation
Notes:
Do not touch the diaphragm with hard objects, which may cause damage to thediaphragm.
Please read the Instruction Manual of the product carefully before installation and check the relevant information of theproduct.
Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults.
Misuse of the product maycausedanger or personal injury.
2000-500PA-ASF Dwyer Instruments Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer”s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It”s inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment
Product Highlights:
Bezel provides flange for flush mounting in panel.
Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
Precision litho-printed scale is accurate and easy to read.
Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
Pointer stops of molded rubber prevent pointer over-travel without damage.
“Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test.
Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Overpressure Protection:
Blowout plug is comprised of a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 PSIg (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023″ clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180″ of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component.
O-ring seal for cover assures pressure integrity of case. Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages
TBU-00 Dwyer Temperature Transmitter
Minimum Order Quantity
1 Number
Model Name/Number
TBU-00
Brand
Dwyer USA
Usage/Application
Industrial Process Monitoring
Weight
1.4 oz (40 g)
Power Supply
10 to 35 VDC
Response Time
1.6 s, typical
Temperature Drift
< +-0.16% / 25 deg C
Temperature Limits
– 40 DegreeF to 185 deg F (-40 to 85 deg C)
TBU-00 Dwyer Temperature Transmitter Field Selectable, Universal Input, In-Head Mounting The Model TBU-00 Temperature Transmitter is a high precision temperature transmitter designed to easily mount in most temperature sensor instrument enclosures. The universal input reduces inventory while the micro-USB port facilitates easy configuration, and calibration in the lab or in the field. The versatile TBU model allows for selection and configuration of input type, measurement range, and calibration. The output can be set as either direct 4 to 20 mA, or reverse 20 to 4 mA, through easy to use configuration software.
Product Applications:
Process applications where a 4 to 20 mA signal is required
Food processing equipment
Boiler equipment
Refrigeration equipment
Features:
Configurable Measurement Range
Standard Temperature Sensor Head Enclosure Mounting
Pt100 connection for 2, 3, or 4 wires
A-396A Dwyer Calibration Pump
Minimum Order Quantity
1 Number
Brand
Dwyer USA
Model Name/Number
A-396A
Dimensions
36″ Lengths
Usage/Application
Industrial
Working Pressure
72 psi (5 bar)
Temperature Limits
-20 to 120 deg F (-29 to 49 deg C)
Displaced Volume
Approximately 1.2 in3(20 cm3) with 3/64″ (1 mm)thread revolution (turn)
Output Connection
1/8″ NPT(F)
Overall Dimensions
7-7/8″ (20 cm) length, 1-3/8″ (3.5 cm) diameter
Weight
14 oz (400 g)
A-396A Dwyer Calibration Pump Model A-396A Calibration Pump Generates up to 72 psig, Integral Bleed Fitting Serves as Pressure Source to calibrate Gages and Transmitters or to Set Pressure Switches. Use with Manometer or other Pressure Standard. Includes volume adjuster enabling fine pressure control and bleed valve. Generates pressures from a fraction of an inch w.c. to 72 psig (5 bar). Includes barbed fitting, tee connector and three 36″ lengths of vinyl tubing. Calibration Pump, serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Includes volume adjuster enabling fine pressure control and bleed valve. Caution:
Do Not Over Tighten The Fitting. Damage to the threads in thecylinder or interface with Moving Parts inside the Cylinder may Result.
Connect the Calibration Pump to both the Manometer (or other Pressure Standard of your choice) and the device to be calibrated, by means of atee connector as shown in Figure A. Low pressure tubing is provided. Tomaintain pressure integrity, the use of Teflon® tape to seal the pipethreads is recommended. Referring to Figure B, close the vent valve .Holding the pump body in one hand and grasping the pump tee handle in the other hand, gently pump until the desired pressure is obtained.Fine adjustment of the pressure can be achieved by turning the vernierknob clockwise to increase pressure and counter-clockwise Todecrease Pressure. If the desired calibration pressure is less than a fewinches of water column, use only the vernier knob to achieve thedesired calibration pressure. After the Calibration test is complete, openvent valve to Release the pressure.
MST2-01 Digital Moisture Meter
Minimum Order Quantity
1 Number
Warranty
1 Year
Usage/Application
Laboratory
Type
Digital Moisture Meter
Model Name/Number
MST2-01
Measuring Range
0 to 70%
Brand
Dwyer USA
Temperature Range
0 to 40 Degree Celsius
Size/Dimension
5.75″ x 1.5″ x 0.75″ (147 mm x 36 mm x 18 mm).
Display Type
3-digit LCD
Power
3 V CR2032 lithium metal battery,installed functional,user replaceable.
Weight
2.4 oz (68 g).
MST2-01 Digital Moisture Meter Measures Moisture, Temperature and Relative Humidity The Model MST2-01 Digital Moisture Meter is a High-Accuracy instrument used for Determining the moisture content in wood, bamboo, and other various materials. This unit also has the ability to measure ambient temperature and relative Humidity. The large Digital LCD Makes Measurements easy to read, While the hold function makes them easy to record. The MST2-01 includes a protective cap, two replacement pins, and one battery.
Dwyer Zener Barrier
Minimum Order Quantity
1 Number
Brand
Dwyer USA
Model Name/Number
MTL7706/7787
Power Supply
20 to 35 VDC
Weight
4.9 oz (140 g)
Safety Description
28 uV, 300, 93 mA
Terminals
Accommodate up to 2.5 mm2 stranded or single-core
Humidity
5 to 95% RH
Temperature Limits
-4 to 140 deg F (-20 to 60 deg C); Storage: -40 to 176 deg F (-40 to 80 deg C)
LED Indicator: Green
Power Indication
Accuracy
+-2 uA
Load Resistance
0 to 500
Safe Area Output
4 to 20 mA
Dwyer Zener Barrier Series MTL7706/7787 Zener BarrierIntrinsically Safe Barriers for Hazardous Locations The MTL7706/7787 is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® Transmitters Approved for use in hazardous areas. These Barriers limit the amount of energy allowed to pass into the Hazardous area, which inhibit ignition in Flammable Atmospheres.
Product Applications:
Electrically Isolates Pressure and level Transmitters From Unregulated Circuits for Intrinsically Safe Applications
MTL7706 Dwyer Zener Barrier
Minimum Order Quantity
1 Number
Brand
Dwyer USA
Usage/Application
Electrically Isolates Pressure And Level Transmitters From Unregulated Circuits For Intrinsically
Model Name/Number
MTL7706
Power Supply
20 to 35 VDC w.r.t. earth.
Weight
4.9 oz (140 g)
Safety Description
28 uV,300,93 mA
Accuracy
+-2 uA
Load Resistance
0 to 500
Safe Area Output
4 to 20 mA
The MTL7706 Dwyer Zener Barrier is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer Transmitters Approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the Hazardous area, which inhibit ignition in Flammable Atmospheres.
Product Applications:
Electrically Isolates Pressure and Level Transmitters From Unregulated Circuits For Intrinsically Safe Applications
MTL7787 Dwyer Zener Barrier
Minimum Order Quantity
1 Number
Brand
Dwyer USA
Usage/Application
Electrically Isolates Pressure And Level Transmitters From Unregulated Circuits For Intrinsically
Model Name/Number
MTL7787
Power Supply
20 to 35 VDC w.r.t. earth.
Weight
4.9 oz (140 g)
Safety Description
28 uV,300,93 mA
Accuracy
+-2 uA
Load Resistance
0 to 500
Safe Area Output
4 to 20 mA
The MTL7787 Dwyer Zener Barrier is an intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer Transmitters Approved for use in hazardous areas. These Barriers Limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.
Product Applications:
Electrically Isolates Pressure and Level Transmitters From Unregulated Circuits For Intrinsically Safe Applications
Magnehelic Differential Pressure Gauge.
Minimum Order Quantity
12 Piece
Country of Origin
Made in India
Mack
Dwyer USA
Range
0-60 PA
Weight
1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Shape
Round
Pressure Limits
20 Hg. to 15 psig
Temperature Limits
20 to 140 Degree Fahrenheit x(-6.67 to 60 Degrees Celsius)
Diameter
4 (101.6 mm)
Round Magnehelic Gauge.
Keeping The Diverse Requirements Of Customers In Mind, We Are Instrumental In Providing Round Magnehelic Gauge.
The Pressure Transmitter Type 506 with proven ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. The pressure sensors are specially developed for use in the industrial refrigeration technology.Fixed order quantities on request
Electrical connection Connector DIN EN 175301-803-A or C, M12x1 Cable 1.5 m
Pressure connection Inside thread or outside thread
Compact construction
Automated manufacture in large quan tities for ideal Price / Performance ratio
Rugged Ceramic Sensor Technology
No Mechanical Creepage
High Resistance to Extreme Temperatures
Huba Differential Pressure Switch Range 20 To 300 Pac
Minimum Order Quantity
1 Number
Brand
Huba Control Switzerland
Media Type
Gas
Electrical Connection
Screw Terminals
Model Name/Number
604.9000001
Pressure Range
20 to 300 PAC
Weight
250 g
Usage/Application
Pharma
Huba Differential Pressure Switch Range 20 To 300 Pac We Supply High Quality Products of Huba Control Which You May Use to Recover Your Broken Equipment. Our Team of Experts is Ready to Find the Best Cheap Prices For Products of Huba Control – 604.9000001 Differenzdruck-Schalter Type 604 in United States. Save Money With World’s High Quality and Low Price Products made by Huba Control. Using Our Professional Services Will Help You Be More Competitive on the Market and it will Save You Time. Our company is Not a Representative of Huba Control, But we are Selling Their Products at Good Prices. We Are Selling Huba Control – 604.9000001 Differenzdruck-Schalter Type 604 in United States at competitive prices! During The Past Years we Managed to Develop Enough to Satisfy the Requirements Of Our Customers.
Huba Differential Pressure Switch Range 500 To 2000 Pac
Minimum Order Quantity
1 Number
Brand
Huba Control Switzerland
Media Type
Gas
Electrical Connection
Screw Terminals
Pressure Range
500 to 2000 PAC
Weight
250 g
Usage/Application
Pharma
Huba Differential Pressure Switch Range 500 To 2000 Pac We Supply High Quality Products of Huba Control Which You May Use to Recover Your Broken Equipment. Our Team of Experts is Ready to Find the Best Cheap Prices For Products of Huba Control Differenzdruck-Schalter Type 604 in United States. Save Money With World’s High Quality and Low Price Products made by Huba Control. Using Our Professional Services Will Help You Be More Competitive on the Market and it will Save You Time. Our company is Not a Representative of Huba Control, But we are Selling Their Products at Good Prices. We Are Selling Huba Control Differenzdruck-Schalter Type 604 in United States at competitive prices! During The Past Years we Managed to Develop Enough to Satisfy the Requirements Of Our Customers.
Huba Differential Pressure Switch Range 50 To 500 Pac
Minimum Order Quantity
1 Number
Brand
Huba Control Switzerland
Media Type
Gas
Contact System Type
SPDT
Electrical Connection
Screw Terminals
IP Rating
IP65
Model Name/Number
604.9100001
Pressure Range
50 to 500 PAC
Weight
250 g
Usage/Application
Pharma Industry
Huba Differential Pressure Switch Range 50 To 500 Pac We Supply High Quality Products of Huba Control Which You May Use to Recover Your Broken Equipment. Our Team of Experts is Ready to Find the Best Cheap Prices For Products of Huba Control – 604.9100001 Differenzdruck-Schalter Type 604 in United States. Save Money With World’s High Quality and Low Price Products made by Huba Control. Using Our Professional Services Will Help You Be More Competitive on the Market and it will Save You Time. Our company is Not a Representative of Huba Control, But we are Selling Their Products at Good Prices. We Are Selling Huba Control – 604.9100001 Differenzdruck-Schalter Type 604 in United States at competitive prices! During The Past Years we Managed to Develop Enough to Satisfy the Requirements Of Our Customers.
Huba Differential Pressure Switch Range 1000 To 5000 Pac
Minimum Order Quantity
1 Number
Brand
Huba Control Switzerland
Media Type
Gas
Electrical Connection
Screw Terminals
Model Name/Number
604.9500002
Pressure Range
1000 to 5000 PAC
Weight
250 g
Usage/Application
Pharma
Huba Differential Pressure Switch Range 1000 To 5000 Pac We Supply High Quality Products of Huba Control Which You May Use to Recover Your Broken Equipment. Our Team of Experts is Ready to Find the Best Cheap Prices For Products of Huba Control – 604.9500002 Differenzdruck-Schalter Type 604 in United States. Save Money With World’s High Quality and Low Price Products made by Huba Control. Using Our Professional Services Will Help You Be More Competitive on the Market and it will Save You Time. Our company is Not a Representative of Huba Control, But we are Selling Their Products at Good Prices. We Are Selling Huba Control – 604.9500002 Differenzdruck-Schalter Type 604 in United States at competitive prices! During The Past Years we Managed to Develop Enough to Satisfy the Requirements Of Our Customers. Get an Offer By Sending Us An Inquiry Via E-Mail Or Through Our Online
604 Differential Pressure Switch
Minimum Order Quantity
12 Number
Brand
Huba Control Switzerland
Contact System Type
SPDT
Electrical Connection
Screw Terminals
Model Name/Number
604
Weight
250 g
Enclosure Protection
IP54
Dimensions
103 mm x 88 mm x 55 mm
Lowest Turn-on Pressure
0.2 mbar
Hysteresis
0.1 mbar
Overpressure Protection
75 mbar
Working Temperature
-30 deg to 70 deg C
Electrical Contact
5A/250Vac SPDT; 2A/30Vdc
604 Differential Pressure Switch Used as DP Flow Switch in Ventilation Ducts for The Control of Filters and Fans, and in Primary and Secondary Control Systems for the Control of Dampers. Precise setpoint adjustment is done through individual scale and by turning knob. Models:
Huba Differential Pressure Switch Range 100 To 1000 Pac
Minimum Order Quantity
12 Number
Brand
Huba Control Switzerland
Media Type
Gas
Electrical Connection
Screw Terminals
Model Name/Number
604.9210000
Pressure Range
100 to 1000 PAC
Weight
250 g
Usage/Application
Pharma
Huba Differential Pressure Switch Range 100 To 1000 Pac We Supply High Quality Products of Huba Control Which You May Use to Recover Your Broken Equipment. Our Team of Experts is Ready to Find the Best Cheap Prices For Products of Huba Control – 604.9210000 Differenzdruck-Schalter Type 604 in United States. Save Money With World’s High Quality and Low Price Products made by Huba Control. Using Our Professional Services Will Help You Be More Competitive on the Market and it will Save You Time. ur company is Not a Representative of Huba Control, But we are Selling Their Products at Good Prices. We Are Selling Huba Control – 604.9210000 Differenzdruck-Schalter Type 604 in United States at competitive prices! During The Past Years we Managed to Develop Enough to Satisfy the Requirements Of Our Customers.
Industrial Process Monitoring, Irrigation System Pressure
Output Voltage
4-20mA
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Huba 511.915003841 Pressure Transmitter 0 – 4 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.
Fixed Order Quantities On Request
Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
Huba 511.917003571 Pressure Transmitter 0 – 6 bar
Minimum Order Quantity
1 Number
Model Number
511.917003571
Brand
Switzerland
Frequency Range
0 – 6 Bar
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Output Type
4-20 mA
Huba 511.917003571 Pressure Transmitter 0 – 6 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio. Fixed Order Quantities On Request
Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector
Huba 511.930003842 Pressure Transmitter 0 – 10 bar
Minimum Order Quantity
1 Number
Model Number
511.930003842
Brand
Switzerland
Frequency Range
0 – 10 Bar
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Output Type
4-20 mA
Huba 511.930003842 Pressure Transmitter 0 – 10 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio. Fixed Order Quantities On Request
Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
Huba 511.930007041 Pressure Transmitter 0 – 10 Bar
Minimum Order Quantity
1 Number
Model Number
511.930007041
Brand
Switzerland
Frequency Range
0 – 10 Bar
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
16-34 VDC
Output Type
0-10 V
Huba 511.930007041 Pressure Transmitter 0 – 10 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio. Fixed Order Quantities On Request
Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
Huba 511.932003842 Pressure Transmitter 0 – 25 bar
Minimum Order Quantity
1 Number
Model Number
511.932003842
Brand
Switzerland
Frequency Range
0 – 25 Bar
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Output Type
4-20 mA
Huba 511.932003842 Pressure Transmitter 0 – 25 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio. Fixed Order Quantities On RequestMedium Liquids And Gases:
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
Huba 511.940003842 Pressure Transmitter 0 – 60 Bar
Minimum Order Quantity
1 Number
Model Number
511.940003842
Brand
Switzerland
Frequency Range
0 – 60 Bar
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Output Type
4-20 mA
Huba 511.940003842 Pressure Transmitter 0 – 60 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.
Fixed Order Quantities On Request:
Medium Liquids And Gases
Pressure Range -1 … 0 – 600 bar
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Accuracy < 0.5% fs
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
Huba 511.941003842 Pressure Transmitter 0 – 100 bar
Minimum Order Quantity
1 Number
Model Number
511.941003842
Brand
Switzerland
Frequency Range
0 – 100 Bar
Accuracy
< 0.5% fs
Usage/Application
Industrial Process Monitoring, Irrigation System Pressure
Product Weight
200 g
Rated Supply Voltage
8-33 VDC
Output Type
4-20 mA
Huba 511.941003842 Pressure Transmitter 0 – 100 bar These compact OEM Pressure Transmitters Type 511 Meet The Highest Specification for Mechanical Stress, EMC Compatibility, and Operational Reliability, Which Means That This Range is Particulary Suitable For All Demanding Industrial Applications. This Sensor Utilises a Ceramic Technology, Developed by Huba Control and for the Last 20 Years, in Millions of Applications, Used in Combination With Unique Integrated Electronic Design, Means That The Type 511 Series Has a High Degree of Accuracy For All Temperature Ranges. These Units Are Available In Small Or Production Quantities, With An Excellent Price To Performance Ratio.
Fixed Order Quantities On Request
Medium Liquids And Gases
Output 0 … 5 V, 1 … 6 V, 0 … 10 V, 4 … 20 mA
Electrical Connection Cable 1.5 m, swift connector, AMP JPT, M12x1, Connector DIN EN 175301-803-C
Pressure Connection Inside Thread Or Out Side Thread.
Compact And Rugged Construction For Highest Operational Reliability.
No Media Egress When Exceeding Rupture Pressure.
Negligible Temperature Influence On Accuracy.
Excellent EMC Capacity.
Saving Time By Quick Cable Mounting By The Customer With Swift Connector.
1900 Dwyer Series Compact Low Differential Pressure Switches
Minimum Order Quantity
1 Number
Model Number
1900
Frequency Range
0.07 to 20″ w.c.
Weight
1lb. 4.5 oz. (581 g)
Brand
Dwyer USA
Electrical Rating
15 A @ 120-480 VAC (~), 60 Hz
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Agency Approvals
CE,UL,CSA,FM
Pollution Degree
2
Process Connections
1/8″ female NPT
Repeatability
+-3%
1900 Dwyer Series Compact Low Differential Pressure Switches For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure and prevents tampering. UL, CE and CSA listed, and FM approved. Dwyer 1900 Series Offers
Features:
Oversized check valves for smooth controlled operation
Mash proof vent valve (no needle valve)
Patented non-oil based lubricants used on all moving parts
Dual O-rings on all pistons to ensure zero leakage
Applications:
Air conditioning refrigeration coil icing detection; defrost cycle initiation
Clogged filter detection
Variable air volume controller
1900-00 Dwyer Series Compact Low Differential Pressure Switch Range 0.07-0.15
Minimum Order Quantity
1 Number
Model Number
1900-00
Brand
Dwyer USA
Frequency Range
0.07-0.15″ W.C
Usage/Application
Variable Air Volume Controller,Clogged Filter Detection
Product Weight
1lb. 4.5 oz. (581 g)
Electrical Rating
15 A @ 120-480 VAC (~),60 Hz
Agency Approvals
CE,UL,CSA,FM
Pollution Degree
2
Process Connections
1/8″ female NPT
Repeatability
+-3%
1900-00 Dwyer Series Compact Low Differential Pressure Switch Range 0.07-0.15″ Most Popular SERIES 1900 Combines Advanced Design and Precision Construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.
1900-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55
Minimum Order Quantity
1 Number
Model Number
1900-0
Brand
Dwyer USA
Frequency Range
0.15-0.55″ W.C
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Power/Voltage
120-277 VAC
Pollution Degree
2
Weight
1lb. 4.5 oz. (581 g)
Agency Approvals
CE,UL,CSA,FM
Process Connections
1/8″ female NPT
Repeatability
+-3%
Altitude Limit
6560 ft (2000 m) max
Humidity Limit
80% RH (non-condensing)
1900-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55 The Dwyer 1910-0 Compact Low Differential Pressure Switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, 19100 switches have set points from 0.15 – 0.55″ w.c.. Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.
Flame-proof ATEX enclosure protects the device in hazardous areas
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications
Range screw protected inside switch enclosure prevents tampering
No power to operate DPDT switch means no additional wiring or conduit reduces material and installation labor costs
Easy access for modifying set point simplifies adjustment
Both control contacts activate at the same time eliminating system issues where lead switch activities preventing the lagging switch from sending a signal
1900-1 Dwyer Series Compact Low Differential Pressure Switch Range 0.40-1.6″ W.C
Minimum Order Quantity
1 Number
Brand
Dwyer USA
Media Type
Gas
IP Rating
0.40-1.6″ W.C
Model Number
1900-1
Power/Voltage
120-277 VAC
Weight
1lb. 4.5 oz. (581 g)
Repeatability
+-3%
1900-1 Dwyer Series Compact Low Differential Pressure Switch Range 0.40-1.6″ W.C Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.
1900-5 Dwyer Series Compact Low Differential Pressure Switch Range 1.40-5.5
Minimum Order Quantity
1 Number
Model Number
1900-5
Brand
Dwyer USA
Frequency Range
1.40-5.5″ W.C
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Power/Voltage
120-277 VAC
Product Weight
1lb. 4.5 oz. (581 g)
Repeatability
+-3%
Process Connections
1/8″ female NPT
Pollution Degree
2
1900-5 Dwyer Series Compact Low Differential Pressure Switch Range 1.40-5.5″ Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.
1900-10 Dwyer Series Compact Low Differential Pressure Switch Range 3.0-11.75
Minimum Order Quantity
1 Number
Model Number
1900-10
Brand
Dwyer USA
Frequency Range
3.0-11.75″ W.C
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Product Weight
1lb. 4.5 oz. (581 g)
Agency Approvals
CE,UL,CSA,FM
Pollution Degree
2
Process Connections
1/8″ female NPT
1900-10 Dwyer Series Compact Low Differential Pressure Switch Range 3.0-11.75 Most popular Series 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.
1920-10 Dwyer Series Compact Low Differential Pressure Switch Range 4.0-20.0
Minimum Order Quantity
1 Number
Model Number
1920-10
Brand
Dwyer USA
Frequency Range
4.0-20.0″ W.C
Power
120-277 VAC
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Product Weight
1lb. 4.5 oz. (581 g)
Process Connections
1/8″ female NPT
Repeatability
+-3%
Agency Approvals
CE,UL,CSA,FM
1920-10 Dwyer Series Compact Low Differential Pressure Switch Range 4.0-20.0 Most popular SERIES 1900 combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering.
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications.
Range screw protected inside enclosure provides simplifies making adjustments but prevents tampering.
1910-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55
Minimum Order Quantity
1 Number
Model Number
1910-0
Brand
Dwyer USA
Frequency Range
0.15-0.55″ W.C
Power
120-277 VAC
Usage/Application
Air Conditioning Refrigeration Coil Icing Detection; Defrost Cycle Initiation
Weight
1lb. 4.5 oz. (581 g)
Agency Approvals
CE,UL,CSA,FM
Pollution Degree
2
Process Connections
1/8″ female NPT
Repeatability
+-3%
1910-0 Dwyer Series Compact Low Differential Pressure Switch Range 0.15-0.55 The Dwyer 1910-0 Compact Low Differential Pressure Switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, 19100 switches have set points from 0.15 – 0.55″ w.c.. Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved.
Flame-proof ATEX enclosure protects the device in hazardous areas
Compact size and repeatability, provides a high-value switch for many industrial and OEM applications
Range screw protected inside switch enclosure prevents tampering
No power to operate DPDT switch means no additional wiring or conduit reduces material and installation labor costs
Easy access for modifying set point simplifies adjustment
Both control contacts activate at the same time eliminating system issues where lead switch activities preventing the lagging switch from sending a signal
