SETRA Pressure Transmitter Part No 3100B0035C1GB Range -1 TO -35 Bar
- Part No.: 3100B0035C1GB
- Model: Setra Model 3100
- Pressure Range: -1 to 35 Bar (compound/gauge range as specified)
- Output: 4–20 mA
- Pressure Connection: 1/4″ SAE flare — the available part listing describes this variant as 35BARC, 4–20 mA, 1/4 AEF, MDIN.
The SETRA Model 3100 is an industrial OEM pressure transmitter designed for high performance, reliability and long-term stability. It uses a sputtered thin-film sensing element and an all-welded stainless-steel construction. The transmitter is available with different pressure ranges, outputs, pressure connections and electrical connections.
Technical Data
| Parameter | Specification |
|---|---|
| Brand | SETRA |
| Model | 3100 |
| Part No. | 3100B0035C1GB |
| Pressure Range | 0–35 Bar |
| Pressure Type | Gauge* |
| Output | 4–20 mA |
| Circuit | 2-Wire |
| Accuracy | ±0.25% FS |
| Sensing Element | Sputtered Thin-Film |
| Construction | All-welded stainless steel |
| Enclosure Protection | IP67 |
| Compensated Temperature | -40°C to +125°C |
| Operating/Storage Temperature | -40°C to +125°C |
| Response Time | 1 ms |
| Long-Term Stability | ±0.2% FS for ranges below 60 Bar |
| Wetted Parts | 17-4 PH stainless-steel diaphragm, 304 SS fittings |
| Weight | Approx. 35 g |
The general Model 3100 datasheet confirms the ±0.25% FS accuracy, IP67 protection, stainless-steel wetted construction, temperature range and 4–20 mA electrical configuration.
Product Features
- ±0.25% FS accuracy
- 4–20 mA current output
- 2-wire electrical circuit
- Sputtered thin-film sensing technology
- All-welded stainless-steel construction
- IP67 environmental protection
- Reverse-wiring protection
- Excellent vibration resistance
- High EMC protection
- No oil-filled sensing element
- Compact design
- Thermally compensated sensor
- Long-term stability
- RoHS compliant
- CE and UL approved for the Model 3100 series
The SETRA Model 3100 Can Be Used In:
- Industrial OEM machinery
- Hydraulic systems
- Pneumatic systems
- Compressor systems
- Booster pump systems
- Irrigation systems
- HVAC/R equipment
- Industrial automation
- Industrial engines
- Off-highway vehicles
- Process pressure monitoring
- Pump and pressure-control applications
Setra specifically identifies industrial OEMs, hydraulic machinery, HVAC/building automation and other industrial applications for its pressure transmitters.
Ambient Conditions
Operating/Storage Temperature: -40°C to +125°C
Compensated Temperature Range: -40°C to +125°C
Protection: IP67
Vibration: Designed to withstand high levels of industrial vibration.
Material
- Diaphragm: 17-4 PH stainless steel
- Fittings: 304 stainless steel
- Construction: All-welded stainless steel
- Sensing technology: Sputtered thin-film strain gauge
The stainless-steel construction provides durability for demanding industrial OEM applications.
Electrical Data
Output: 4–20 mA
Circuit: 2-wire
Supply: 8–30 VDC
Maximum loop resistance: (Supply Voltage − 8) × 50 Ω
Protection: Reverse wiring protected.
Typical 2-Wire Connection
Power Supply (+) → Transmitter (+)
Transmitter (−) → PLC/Controller/Readout (+)
Readout (−) → Power Supply (−)
Always verify the pinout against the electrical connector supplied with the exact transmitter before wiring.
Installation Guide
- onfirm that the transmitter’s pressure range is suitable for the application.
- Verify the pressure-port/thread configuration before installation.
- Install the transmitter without excessive mechanical force.
- Use the correct sealing method for the pressure connection.
- Connect the 4–20 mA loop according to the applicable wiring diagram.
- Use a suitable DC power supply within the specified voltage range.
- Keep the electrical connector protected from water and contamination.
- Avoid pressure spikes above the transmitter’s permissible pressure limit.
- After installation, check the pressure connection for leakage.
- Verify the 4–20 mA signal before putting the system into service.
Approval / Compliance
The Model 3100 series is specified as:
- CE Approved
- UL Approved
- RoHS Compliant
- IP67 Rated
Exact certification can depend on the selected configuration.
Accessories
Suitable accessories can include:
- Mating electrical connector
- Pressure adapters
- Mounting accessories
- Sealing components
- Cable/connector assemblies
- Pressure-port adapters
The exact accessory must match the pressure connection and electrical termination selected for Part No. 3100B0035C1GB. The Model 3100 is offered with multiple pressure-port and electrical-connection options.
Additional Information:
-
- Item Code: SETRA Pressure Transmitter Part No 3100B0035C1GB Range -1 TO -35 Bar
- WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
- www.envirotechindustrialproductsindia.in
- www.envirotechindustrialproductsdelhi.com
- www.envirotechindustrialproduct.info
- www.envirotechindustrialproducts.info
- www.envirotechdelhi.com
- www.envirotechindia.co.in
- www.envirotechdelhi.in
- www.envirotechdelhi.net
