Category: Uncategorized

Differential Pressure Transmitter DPT10-R8 SERIES

Sensocon USA Series DPT10-R8 Range Differential Pressure Transmitter

 
BrandSensocon
Response Time0.8 – 4.0, jumper selectable
Maximum Pressure100 in w.c.
Power Supply24 VDC or VAC, +/- 10%
Display3 1/2 Digit LCD Backlit LCD
Enclosure RatingIP 54/ NEMA 3
Minimum Resistance1kOhm


The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for monitoring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4-20 mA or 0-10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication.

Specification:

  • Maximum Pressure:100 in w.c.Media compatibility:Dry air or non-aggressive gasesAccuracy:Ranges < 0.5 in w.c. = +/- 0.01 in w.c.Ranges ≥ 0.5 in w.c. = +/- 1.5%includes thermal effects, linearity, hysteresis,repeatability, and long term stability.Temperature Ranges:Compensated: 14° to 122°FOperating: 14° to 122°F
  • Response Time:0.8 – 4.0, jumper selectablePower Supply:24 VDC or VAC, +/- 10%Output:Voltage: 3-wire 0 – 10V or 0 – 5V, jumper selectablePower Consumption: <1.0WMinimum Resistance: 1kΩCurrent: 3-wire4 – 20mAPower Consumption: <1.2WMaximum Load: 500ΩEnclosure Rating:IP 54/ NEMA 3Display:3 ½” Digit LCD Backlit LCD
  • Electrical Connections:Screw terminal block


Model Number:

DPT10-R8         
 inWC-0.5 – 0.5 -2.5 – 2.5 -5.0 – 5.0 0 – 0.5  0 – 1.00 – 2.5 0 – 5.0  0 – 10.0
Pa -125 – 125 -622 – 622 -1250 – 1250  0 – 125 0 – 2500 – 622 0 – 1250 0 – 2500 
mbar  -1.25 – 1.25 -6.2 – 6.2 – -12.5 – 12.5 0 – 1.25 0 – 2.5 0 – 6.2 0 – 12.5 0 – 25 
 mmWC-12.7 – 12.7 -64 – 64 -127 – 127 0 – 12.7 0 – 25.4  0 – 64 0 – 127  0 – 254

Bourdon Type Pressure Gauge

H Guru Bourdon Pressure Gauge

 
Minimum Order Quantity12 Number
Dial Size2.5 inch / 63 mm
BrandH Guru
Pressure Range0 to 4 bar(0 to 60 psi)
UseHVAC Systems
Display TypeAnalog
Pressure TypeGauge Pressure
Connection TypeBSP
Connection Size1/4 inch
Dial TypeDry
Liquid FillingGlycerine
MountingBottom
Material of casingStainless Steel
Model Name/NumberH Guru Bourdon Pressure Gauge
Wetted PartsStainless Steel
Country of OriginMade in India

H Guru Bourdon Type Pressure Gauge

MODEL -PB

MACK – H. GURU INDIA

SIZE – 2.5′,4′,6′

ACC. – 2%

CONN. – BCPM

MNTG- 1/4′, 3/8′ BSP

RANGE – 4.2/60

Bourdon Type Pressure Gauge

 
Minimum Order Quantity12 Number
Dial Size2.5 inch / 63 mm
BrandH Guru
Pressure Range0 to 4 bar(0 to 60 psi)
UseHVAC Systems
Display TypeAnalog
Pressure TypeGauge Pressure
Connection TypeBSP
Connection Size1/4 inch
Dial TypeDry
Liquid FillingGlycerine
MountingBottom
Material of casingStainless Steel
Model Name/NumberBourdon Type Pressure Gauge
Country of OriginMade in India

Bourdon Type Pressure Gauge

  • MODEL -PB
  • MACK – H. GURU INDIA
  • SIZE – 2.5′,4”,6”
  • ACC. – 2%
  • CONN. – BCPM
  • MNTG- 1/4′, 3/8” BSP
  • RANGE – 4.2/60
 

Humidity and Temperature Sensors

The Inexpensive Transmitter

 
Voltage0…1/5/10 VDC
Response Time4 s
Supply Voltage12…28 VAC / 15…40 VDC
HousingABS
IPIP65
Current4-20 mA
Output NumberTwo freely scalable analog outputs


Backed with immense experience and understanding, we are recognized as one of the most prominent importers and exporters of Transmitter that offers stable and reliable Humidity and Temperature measurement. Be it in international or domestic market, our given Transmitters are cherished and acknowledged over the global platform. The entire array of Transmitter is checked upon a series of norms so as to assure its quality. Besides, we offer the Transmitter in a huge array of stipulations as per the requirements of our patrons.

 

Technical Information :

The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative Humidity and Temperature. The devices are equipped with the tried-and-tested Hygromer® IN-1 sensor and boast unbeatable value for money. The optional ROTRONIC SW21 Software enables you to scale, calibrate and adjust (only Humidity) the Transmitter.

Technical Specification :

General

Transmitter type

2-wire type: HF120
3/4 wire type: HF13x

Supply voltage

12…28 VAC / 15…40 VDC

Current consumption

2-wire type max. 40mA
3/4 wire type
with voltage output: < 15 mA
with current output: < 55 mA

Parameters

Humidity and/or temperature

Housing material / IP

ABS / IP65

Weight

Wall version type W and A: 140 g
Duct version 100 mm type B and D: 140 g
Duct version 300 mm type E and F: 200 g
Space version type L and S: 90 g

Integrated sensors

Yes

Operating and measurement range

-20…50oC / 0…100 %RH (non-condensing)

CE / EMC compatibility

2004/108/EC

Humidity Measurement

Humidity sensor

ROTRONIC Hygromer® IN-1

Accuracy at 23 oC +5 K

<3 %RH (10…90 %RH)

Long-term stability

<1.5 %RH per year

Response time τ63

30 s (63 % of a jump 35…80 %RH) without ???lter

Temperature Measurement

Sensor

Thermistor

Standard temperature scale

0…50oC or 0…100oF

Accuracy at 23oC +5 K

+ 0.3oK (0…50oC)

Response time

4s

Outputs

 

Number

Two freely scalable analog outputs

Current

4…20 mA

Voltage

0…1/5/10 VDC

Air Velocity and Temperature Transmitter EE75 Series

 
Output Value0 – 10 V or 4 – 20 mA (Adjustable by jumpers)
Accuracy+/- 0.2m/s 3% mv
Model NumberEE75 Series
TypeTransmitter
Measuring RangeUp to 40 m/s
Working Temperature40 to 120 deg C

Our Air Velocity Transmitters EE75 Series has a huge demand in the market due to its sturdy construction and high efficiency. These products are widely appreciated among our clients and we provide them in different specifications as per the requirement. Our Air Velocity EE75 Series is extensively used in numerous industries for diverse applications. We also offer them in various customizations to meet the different customer demands. The EE75 Series Air Velocity Transmitters were developed to obtain accurate measuring results over a wide range of Velocities and Temperatures. A high-quality hot film sensor element based on cutting- edge thin film technology ensures maximum sensitivity, even at lowest mass flows. At the same time, the innovative probe design produces reliable measuring results at high flow velocities of up to 40m/s (8000fVmin). The integrated Temperature compensation minimizes the Temperature cross-sensitivity of the EE75 Series which, combined with the robust mechanical design, allows it to be used at process Temperatures between -40 to 120°C(-40 to 248°F).

Other Details:

  • In addition to Air Velocity and Temperature values, the Transmitter calculates the volumetric flow rate in m3/h or ft3/min. The cross section of the duct needs to be determined for this purpose and the volumetric flow rate can be displayed and directed to one of the analogue outputs. The EE75 Series can be used to measure the velocity of other gases as well, although a correction has to be applied to the unit at the factory.
 

Series 605 Magnehelic Differential Pressure Indicating Transmitter Wholesaler

Series 605 Magnehelic Differential Pressure Indicating Transmitter

 
Usage/ApplicationMonitor Pressures in Ducts, Rooms,or Total Building Pressures, Filter Monitoring, Local indication of Clean Room Pressures With Process Signal sent to Control Room
BrandDWYER
Model Name/NumberSeries 605
Connection1/8″ female NPT.
Dial Size4″ (101.6 mm) dial face,5″ (127 mm) OD x 2-11/16″ (68.3 mm).
OptionalAir and non-combustible,compatible gases.

The Series 605 Magnehelic Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure.The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system.The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer Magnehelic gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4 to 20 mA control loop powered by a 10 to 35 VDC supply.

Product Applications:
  • Monitor Pressures in Ducts,
  • Rooms,or Total Building Pressures,
  • Filter Monitoring,
  • Local indication of Clean Room Pressures With Process Signal sent to Control Room

Models & Ordering:
  • Model-605-0
  • Range – 0-.50″ w.c.,max. pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±3% mechanical accuracy.
  • Model-605-00N
  • Range – .05-0-0.2″ w.c.,max.pressure 25 psi (1.7 bar),±2% electrical accuracy,±4% mechanical accuracy.
  • Model-605-1
  • Range – 0-1.0″ w.c.,max.pressure 25 psi (1.7 bar), ±2% electrical accuracy,±2% mechanical accuracy.
  • Model-605-10 
  • Range – 0-10″ w.c.,max.pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-11
  • Range – .25-0-.25″ w.c.,max. pressure 25 psi (1.7 bar),±2% electrical accuracy,±3% mechanical accuracy.
  • Model-605-125PA
  • Range – 0-125 Pa,max.pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±3% mechanical accuracy.
  • Model-605-2
  • Range – 0-2.0″ w.c.,max. pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-20
  • Range – 0-20″ w.c.,max.pressure 11 psi (75.8 kPa), ±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-250PA
  • Range – 0-250 Pa,max.pressure 25 psi (1.7 bar), ±2% electrical accuracy,±2% mechanical accuracy.
  • Model-605-3
  • Range – 0-3.0″ w.c.,max.pressure 2 psi (13.79 kPa), ±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-30
  • Range – 0-30″ w.c.,max. pressure 11 psi (75.8 kPa), ±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-50
  • Range – 0-50″ w.c.,max. pressure 11 psi (75.8 kPa), ±0.5% electrical accuracy, ±2% mechanical accuracy.
  • Model-605-500PA
  • Range – 0-500 Pa,max. pressure 2 psi (13.79 kPa),±0.5% electrical accuracy,±2% mechanical accuracy.
  • Model-605-6 
  • Range – 0-6.0″ w.c.,max. pressure 2 psi (13.79 kPa),±0.5% electrical accuracy, ±2% mechanical accuracy.
  • Model-605-60PA 
  • Range – 0-60 Pa, max. pressure 25 psi (1.7 bar), ±2% electrical accuracy, ±4% mechanical accuracy.
 

Dwyer 605-0 Magnehelic Differential Pressure Indicating Transmitter 0-.50 Inch

 
Usage/ApplicationMonitor Pressures in Ducts, Rooms,or Total Building Pressures, Filter Monitoring, Local indication of Clean Room Pressures With Process Signal sent to Control Room
BrandDWYER
Model Name/NumberDwyer 605-0
Power Supply10 to 35 VDC (2-wire)
Range0-.50 Inch
ApplicationsMonitor Pressures in Ducts,Rooms,or Total Building Pressures,Filter Monitoring,Local indication o
Dial Size4″ (101.6 mm) dial face,5″ (127 mm) OD x 2-11/16″ (68.3 mm)
Size4 INCH AND 101.6 mm
Weight1 lb,12.6 oz (811 g)


Dwyer 605-0 Magnehelic Differential Pressure Indicating Transmitter 0-.50 Inch

  • Model: 605-0

Provides for both visual monitoring and electronic control of very low differential pressure. Ideal for control applications in building HVAC/R systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system.

Dwyer 605-0 MAGNEHELIC, INDICATING TRANSMITTER, 0-.50

  • Easy to read dial gauge is complimented by the two-wire, 4-20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gauge mechanical design and Series 600 transmitter technology.
  • The two-wire design with terminal strip on the rear simplifies connection in any 4-20 mA control loop powered by a 10-35 VDC supply.

Gauge Specifications:

  • Service: Air and non-combustible, compatible gases.
  • Accuracy: +/-3%.
  • Stability: ±1% F.S./yr.
  • Pressure Limits: 25 psi (1.7 bar).
  • Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
  • Process Connections: 1/8″ female NPT.
  • Size: 4″ (101.6 mm) dial face, 5″ (127 mm) O.D.x 2-11/16″ (68.3 mm).
  • Weight: 1 lb, 12.6 oz (811 g).
  • Agency Approvals: CE.

Transmitter Specifications:

  • Accuracy: +/-2% (includes linearity, hysteresis, repeatability).
  • Temperature Limits: 20 to 120°F(-6.67 to 48.9°C).
  • Compensated Temperature Range: 32 to 120°F (0 to 48.9°C).
  • Thermal Effect: ±0.025% F.S./°F (0.045% F.S./°C).
  • Power Requirements: 10-35 VDC (2-wire).
  • Output Signal: 4 to 20 mA.
  • Zero and Span Adjustments: Protected potentiometers.
  • Loop Resistance: DC; 0-1250 ohms maximum.
  • Current Consumption: DC; 38 mA maximum.
  • Electrical Connections: Screw terminal block.
  • Mounting Orientation: Diaphragm in vertical position.


Dwyer 605-0 Specifications

Gauge
ServiceAir and non-combustible, compatible gases
Stability±1% FS/yr
Temperature Limits20 to 120°F (-6.67 to 48.9°C)
Process Connections???” female NPT
Size4″ (101.6 mm) dial face, 5″ (127 mm) OD x 2-11/16″ (68.3 mm)
Weight1 lb, 12.6 oz (811 g)
Agency ApprovalsCE
Transmitter
Temperature Limits20 to 120°F (-6.67 to 48.9°C)
Compensated Temperature Range32 to 120°F (0 to 48.9°C)
Thermal Effect±0.025% FS/°F (0.045% FS/°C)
Power Requirements10 to 35 VDC (2-wire)
Output Signal4 to 20 mA
Zero and Span AdjustmentsProtected potentiometers
Loop ResistanceDC: 0 to 1250 Ω maximum
Current ConsumptionDC: 38 mA maximum
Electrical ConnectionsScrew terminal block
Mounting OrientationDiaphragm in vertical position

DPG DIGITAL PRESSURE GAUGE-Winters Instruments India

Winter LCD Digital Pressure Gauge

 
Minimum Order Quantity12 Piece
BrandWinter
Measuring RangeAs Per Your Requirements
Model Name/NumberDPG
Usage/ApplicationIndustrial
MaterialABS
ConnectionNew
Display TypeLCD
TypeLCD
ColorBlack
Scale Range2.5 INCH
Accuracy0.5%
Diameter63 MM
Dial Size63 MM
Size63 MM
Country of OriginMade in India

Winter LCD Digital Pressure Gauge

Case Size: 2.5” (63 MM)

Case Material: ABS Rubber Boot Silicone Rubber

LCD Display: 2” x 3/4” (48 MM x 16 MM)

Connection: 1/4” NPT 304SS Sensor 316L Welded,

Piezo Operating Life 1 Million Cycles

Power Supply: 2 x AAA Battery (1.5V) Battery Life 2 Yrs (Auto Shut-Off Mode)

Power Mode: Auto Or Manual Shut-Off

Display Digits:  4 Digits to 5,000 PSI 5 Digits For 10,000 PSI And 15,000 PSI

Pressure Unit Selection: psi, mH2 O, mmHg, mbar, kPa ranges ≤ 100 psi,psi, bar, kgf/cm2 , MPa, atm Ranges ≥ 160 psi

 

Winter Digital Pressure Gauge 0 To 60 Bar

 
Minimum Order Quantity12 Number
BrandWinters Canada
Measuring Range0-60 bar
Model Name/NumberDPG231R11
Usage/ApplicationIndustrial
MaterialSteel
ConnectionNew
Display Typeyas
TypeDPG231R11
ColorBlack
I Deal InNew Only
Battery IncludedYes
Country of OriginMade in India

Winter Digital Pressure Gauge 0 To 60 Bar

Product Description:

  • Winters Dpg Digital Pressure Gauge

Applications:

  • Ideal for commercial and industrial applications in both test measurement and general purpose installations

Description & Features:

  • Simple 2 button operation
  • Reset to zero feature
  • Backlight turns on when on/off button is pressed
  • Option for display to remain continuously on 
  • Continuous Peak pressure indication option
  • 316L welded diaphragm seal
  • Rubber boot is standard
  • ASME B40.100 compliant
  • RoHS compliant
  • ±1% accuracy (±0.5% optional for gauges up to 10,000 psi)
  • 1 year warranty

Aerosense Differential Pressure Controller Wholesaler

DPI2500-2R-D Aerosense Differential Pressure Controller

 
Usage/ApplicationFan,Blower And Filter Monitoring
BrandAerosense
MaterialABS
Model Name/NumberDPI2500-2R-D
Pressure Range100 / 250 / 1000 / 2500 PA AND +-100 Pa / +-250 / +-300 / +-500 PA
Size89 x 86.5 x 37.1 mm

Aerosense Differential Pressure Controller Aerosense Differential Pressure Controller with field selectable measuring range for building automation in HVAC/R industry.

Features:
  • Unit selectable via menu i.e. PA, kPA, MM WC, IN WC, MBAR
  • Combines up to two relay outputs
  • Optional Auto-Zero feature which electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes)
  • The AZ-calibration eliminates all output signal drift due to thermal, electronic or mechanical effects

Applications:
  • Fan, Blower and Filter Monitoring
  • Pressure Monitoring in Clean Rooms
  • Boiler Pressure Monitoring and Alarm
 

DPI2500-2R-D Aerosense Differential Pressure Controller

 
BrandAerosense
Electrical ConnectionScrew Terminals
Model Name/NumberDPI2500-2R-D
Size46.0 W x 14.5 H mm
Weight150 g
Warranty Period6 month
Accuracy+-0.5 % F.S.

DPI2500-2R-D Aerosense Differential Pressure Controller Aerosense Differential Pressure Controller with field selectable measuring range for building automation in HVAC/R industry.

Features:
  • Unit selectable via menu i.e. PA, kPA, MM WC, IN WC, MBAR
  • Combines up to two relay outputs
  • Optional Auto-Zero feature which electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes)
  • The AZ-calibration eliminates all output signal drift due to thermal, electronic or mechanical effects

Applications:
  • Fan, Blower and Filter Monitoring
  • Pressure Monitoring in Clean Rooms
  • Boiler Pressure Monitoring and Alarm
 

DPIC500-2R-D Aerosense Differential Pressure Controller

 
BrandAerosense
Case Size89 x 86.5 x 37.1 mm
Control TypeHigh Limit
MaterialABS
Model Name/NumberDPIC500-2R-D
Pressure Range+-100 Pa / +-250 / +-300 / +-500 PA
Warranty6 month
Accuracy+-0.5 % F.S.
Weight150 g
ApplicationsFan,Blower And Filter Monitoring

DPIC500-2R-D Aerosense Differential Pressure Controller Aerosense Differential Pressure Controller with field selectable measuring range for building automation in HVAC/R industry.

Features:
  • Unit selectable via menu i.e. PA, kPA, MM WC, IN WC, MBAR
  • Combines up to two relay outputs
  • Optional Auto-Zero feature which electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes)
  • The AZ-calibration eliminates all output signal drift due to thermal, electronic or mechanical effects

Applications:
  • Fan, Blower and Filter Monitoring
  • Pressure Monitoring in Clean Rooms
  • Boiler Pressure Monitoring and Alarm
 

Aerosense Carbon Dioxide Transmitter Wholesalers

CDT-100 Aerosense Carbon Dioxide Transmitter

 
Minimum Order Quantity1 Piece
Model NumberCDT-100
Usage/ApplicationDemand Control Ventilation In Schools,Office Buildings,Hospitals And Other Indoor Environments
BrandAerosense
Measurement Range0 to 2000/ 3000/ 5000/ 10000 ppm
Accuracy+-30ppm +-3%
Operating Humidity Range0 to 95% RH
Operating Temperature-10 to 60 deg C
Power24 VDC,AC
Size123x70x43 mm
Storage Temperature-30 to 70 deg C
Storage Temperature for Cold Storage-40 to 70 deg C
Response Time150 seconds
Response Time For Cold Storage70 Seconds
Sampling Interval3 Sec

CDT-100 Aerosense Carbon Dioxide Transmitter Series CDT-100, Carbon Dioxide Transmitter accurately monitors the CO2 concentration in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurements. Measurement range upto 10000 ppm selectable by jumper. It gives analog and RS-485 MODBUS output and supports various functions like recalibration function.

Product Applications:

  • Demand Control Ventilation in schools, office buildings, hospitals and other indoor environments.
  • CO2 Sensor: NDIR (Non-Dispersive Infrared) technology
  • Analog Voltage/Current Output: (3-wired) 0/4-20Ma or 0/2-10V- settable by switch
  • RS-485 MODBUS output: (4-wired) Modicon MODBUS RTU mode, which follow Modicon Modbus protocol-settable address ID switch
  • Re-Calibration function: 10 minutes’ manual recalibration(MCDL) Or weekly auto-calibration (ACDL) are supported and settable by Switch CO2 ppm measurement range -settable by switch

Model No. CDT-100Carbon Dioxide TransmitterCDT-100-LCDCarbon Dioxide Transmitter with displayCDT-100-CSCarbon Dioxide Transmitter for cold storageCDT-100-CS-LCDCarbon Dioxide Transmitter for cold storage with display CDT-100-M Carbon Dioxide Transmitter with MODBUS Communication CDT-100-M-LCD Carbon Dioxide Transmitter with MODBUS Communication & display
 

CDT-100-RLY Aerosense Carbon Dioxide Transmitter

 
Minimum Order Quantity1 Piece
UsageDemand Control Ventilation In Schools,Office Buildings,Hospitals And Other Indoor Environments
ModelSeries CDT-100-RLY
Size123mmx70mmx43mm
Response Time150 seconds
BrandAerosense
Operating Temperature10 to 60 deg C
Storage temperature-30 to 70 deg C

 

CDT-100-RLY Aerosense Carbon Dioxide Transmitter, Carbon Dioxide Transmitter accurately monitors the CO2 concentration in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurements. Measurement range 2000 ppm (5000/10000 ppm) selectable by jumper. It gives analog and Relay output and supports various functions like recalibration function.

Product Applications:

  • Demand Control Ventilation in schools, office buildings, hospitals and other indoor environments.
  • CO2 Sensor: NDIR (Non-Dispersive Infrared) technology
  • Analog Voltage/Current Output: (6-wired) 0/4-20Ma or 0/2-10V- settable by switch
  • Models available with SPST (Single Pole, Single Throw, normally open) relay output.
  • Re-Calibration function: 10 minutes’ manual recalibration is executable with TRB-100 tool

CDT-300 Aerosense Carbon Dioxide Transmitter

 
Minimum Order Quantity1 Piece
Model NumberSeries CDT-300
Usage/ApplicationDemand Control Ventilation In Schools,Office Buildings,Hospitals And Other Indoor Environments
BrandAerosense
Size123mmx70mmx43mm
Response Time150 Seconds
Operating Temperature-10 to 60 deg C
Operating Humidity range0 to 95% RH
Storage temperature-30 to 70 deg C
Power24 V Dc


CDT-300 Aerosense Carbon Dioxide Transmitter Series CDT-300, Carbon Dioxide Transmitter accurately monitors the CO2 concentration in indoor environments to help achieve energy savings. For increased sensor accuracy, a single beam dual wavelength non-dispersive infrared (NDIR) sensor is used to automatically correct the measurements. Measurement range upto 70000 ppm selectable by jumper. It gives analog and RS-485 MODBUS output and supports various functions like recalibration function.

Product Applications:

  • Demand Control Ventilation in schools, office buildings, hospitals and other indoor environments.
  • CO2 Sensor: NDIR (Non-Dispersive Infrared) technology
  • Analog Voltage/Current Output: (3-wired) 0/4-20Ma or 0/2-10V- settable by switch
  • Re-Calibration function: 10 minutes’ manual recalibration(MCDL) Or weekly auto-calibration (ACDL) are supported and settable by Switch CO2 ppm measurement range -settable by switch

 

Model No.Speci???cations
CDT-300Carbon Dioxide Transmitter
CDT-300-LCDCarbon Dioxide Transmitter with display

Series BTT Temperature Transmitter Wholesalers Delhi India.

Series BTT Temperature Transmitter

 
Minimum Order Quantity12 Number
Usage/ApplicationBuilding Automation System Temperature Monitoring
Model Name/NumberSeries BTT Temperature Transmitter
BrandDwyer USA
Voltage13 to 36 VDC for current models, 13 to 36 VDC or 16 to 28 VAC for voltage models.
Accuracy+-0.5 DegreeC @ 25 DegreeC.
Product Weight5.11 oz, 145 g (duct/immersion); 8.4 oz (238 g) (OSA without radiation shield); 1 lb 7.4 oz (663.4 g
Rated Supply VoltageSeries BTT Temperature Transmitter
Response Time100 ms.
Supply Voltage Limits4 to 20 mA or 0 to 10 VDC (depending on model).
Output Type4 to 20 mA or 0 to 10 VDC (depending on model).
Country of OriginMade in India

SERIES BTT TEMPERATURE TRANSMITTERS

Current or Voltage Output; NEMA 4X Enclosures

The Series BTT Temperature Transmitters offer Transmitter output signals with the same form and fit as our popular TE Thermistor and RTD sensors for building HVAC Applications. Thermowells are required when using immersion models in liquid applications.

NIST CALIBRATION Available In Product Configurator.

PRODUCT APPLICATIONS

  • Building Automation System Temperature Monitoring

MODELS & ORDERING

           Model           Description
  • BTT-D04-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 4″ probe
  • BTT-D04-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 4″ probe
  • BTT-D06-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 6″ probe
  • BTT-D06-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 6″ probe
  • BTT-D08-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 8″ probe
  • BTT-D08-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 8″ probe
  • BTT-D12-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 12″ probe
  • BTT-D12-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 12″ probe
  • BTT-D18-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 18″ probe
  • BTT-D18-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 18″ probe
  • BTT-D25-1 Duct Mount Temperature Transmitter with 4 to 20 mA output, 2.5″ probe
  • BTT-D25-2 Duct Mount Temperature Transmitter with 0 to 10 V output, 2.5″ probe


SPECIFICATIONS

  • Temperature Sensor:Pt1000 RTD.
  • Range:-40 to 140°F (-40 to 60°C).
  • Temperature Limits:Operating: -40 to 302°F (-40 to 150°C).
  • Accuracy:±0.5°C @ 25°C.
  • Thermal Effect:±0.01%/°C.
  • Response Time:100 ms.
  • Wetted Materials:All Models:304 SS (probe), polycarbonate (housing);Duct and immersion models: Neoprene (gasket); Outside air models: Nylon (insert), silicone (O-ring).
  • Process Connection:1/2″ NPT (immersion models only).
  • Electrical Connection:Removable terminal block, knocks out for conduit fitting.
  • Conduit Connection:1/2″ NPT.
  • Probe Lengths:2.5 to 18″ (depending on configuration).
  • Power Requirements:13 to 36 VDC for current models, 13 to 36 VDC or 16 to 28 VAC for voltage models.
  • Output Signal:4 to 20 mA or 0 to 10 VDC (depending on model).
  • Enclosure Rating:NEMA 4X (IP66) (immersions models require thermowell).
  • Weight:5.11 oz, 145 g (duct/immersion); 8.4 oz (238 g) (OSA without radiation shield);1 lb 7.4 oz (663.4 g) (OSA with radiation shield).
  • Agency Approvals:CE.

FEATURES

  • Duct, immersion, and outside air models available
  • Radiation shield available for mounting in direct sunlight
  • Transmitter output allows for longer wire runs than standard thermistor sensors

Series BTT Temperature Transmitters Models and Ordering

 
Minimum Order Quantity12 Piece
Usage/ApplicationBuilding Automation System Temperature Monitoring
Model Name/NumberSERIES BTT TEMPERATURE TRANSMITTERS
BrandDwyer USA
Voltage13 to 36 VDC for current models,13 to 36 VDC or 16 to 28 VAC for voltage models.
Accuracy+-0.5 DegreeC @ 25 DegreeC.
Product Weight5.11 oz,145 g (duct/immersion); 8.4 oz (238 g) (OSA without radiation shield); 1 lb 7.4 oz (663.4 g
Response Time100 ms.
Supply Voltage Limits4 to 20 mA or 0 to 10 VDC (depending on model).
Output Type4 to 20 mA or 0 to 10 VDC (depending on model).
Part TypeSERIES BTT TEMPERATURE TRANSMITTERS
Country of OriginMade in India

SERIES BTT TEMPERATURE TRANSMITTERS MODELS & ORDERING

Duct Mount Temperature Transmitter

  • BTT-D04-1-With 4 to 20 mA output,4″ probe
  • BTT-D04-2-With 0 to 10 V output,4″ probe 
  • BTT-D06-1-With 4 to 20 mA output,6″ probe
  • BTT-D06-2-With 0 to 10 V output,6″ probe 
  • BTT-D08-1-With 4 to 20 mA output,8″ probe 
  • BTT-D08-2-With 0 to 10 V output,8″ probe 
  • BTT-D12-1-With 4 to 20 mA output,12″ probe 
  • BTT-D12-2-With 0 to 10 V output,12″ probe 
  • BTT-D18-1-With 4 to 20 mA output,18″ probe 
  • BTT-D18-2-With 0 to 10 V output,18″ probe 
  • BTT-D25-1-With 4 to 20 mA output,2.5″ probe 
  • BTT-D25-2-With 0 to 10 V output,2.5″ probe

Immersion Temperature Transmitter

  • BTT-I04-1-With 4 to 20 mA output,-40 to 60 C temperature range,4″ probe
  • BTT-I04-2-With 0 to 10 V output,-40 to 60 C temperature range,4″ probe
  • BTT-I04-5-With 4 to 20 mA output,0 to 100 C temperature range,4″ probe
  • BTT-I04-6-With 0 to 10 V output,0 to 100 C temperature range, 4″ probe
  • BTT-I06-1-With 4 to 20 mA output,-40 to 60 C temperature range,6″ probe
  • BTT-I06-2-With 0 to 10 V output,-40 to 60 C temperature range,6″ probe
  • BTT-I06-5-With 4 to 20 mA output,0 to 100 C temperature range,6″ probe
  • BTT-I06-6-With 0 to 10 V output,0 to 100 C temperature range,6″ probe
  • BTT-I08-1-With 4 to 20 mA output,-40 to 60 C temperature range,8″ probe
  • BTT-I08-2-With 0 to 10 V output,-40 to 60 C temperature range,8″ probe
  • BTT-I08-5-With 4 to 20 mA output,0 to 100 C temperature range,8″ probe
  • BTT-I08-6-With 0 to 10 V output,0 to 100 C temperature range,8″ probe
  • BTT-I12-1-With 4 to 20 mA output,-40 to 60 C temperature range,12″ probe
  • BTT-I12-2-With 0 to 10 V output,-40 to 60 C temperature range,12″ probe
  • BTT-I12-5-With 4 to 20 mA output,0 to 100 C temperature range,12″ probe
  • BTT-I12-6-With 0 to 10 V output,0 to 100 C temperature range,12″ probe
  • BTT-I25-1-With 4 to 20 mA output,-40 to 60 C temperature range,2.5″ probe
  • BTT-I25-2-With 0 to 10 V output,-40 to 60 C temperature range,2.5″ probe
  • BTT-I25-5-With 4 to 20 mA output,0 to 100 C temperature range,2.5″ probe
  • BTT-I25-6-With 0 to 10 V output,0 to 100 C temperature range,2.5″ probe

Outside Air Temperature Transmitter

  • BTT-O25-1-Outside Air Temperature Transmitter with 4 to 20 mA Output
  • BTT-O25-2-Outside Air Temperature Transmitter with 0 to 10 V Output 
  • BTT-R25-1-Outside Air Temperature Transmitter with 4 to 20 mA Output with solar radiation shield
  • BTT-R25-2- Outside Air Temperature Transmitter with 0 to 10 V Output with solar radiation shield

European Wall Mount Temperature Transmitter (BTT-E/N)

  • BTT-E00-3-European wall mount temperature transmitter with 4 to 20 mA output
  • BTT-E00-4-European wall mount temperature transmitter with 0 to 10 VDC output
  • BTT-N00-3-North American wall mount temperature transmitter with 4 to 20 mA output
  • BTT-N00-4-North American wall mount temperature transmitter with 0 to 10 VDC output
 

Dwyer BTT-D04-1 Duct Mount Temperature Sensors

 
Minimum Order Quantity12 Piece
Usage/ApplicationBuilding Automation System Temperature Monitoring
Model Name/NumberDwyer BTT-D04-1
BrandDwyer USA
Voltage13 to 36 VDC
Accuracy+-0.5 DegreeC @ 25 DegreeC.
Operating RangeDwyer BTT-D04-1
Product Weight5.11 oz (145 g)
Protection TypeDwyer BTT-D04-1 Duct Mount Temperature Sensors
Rated Supply Voltage13 to 36 VDC
Response Time100 msec
Output Type4 to 20 mA
Part TypeDwyer BTT-D04-1 Duct Mount Temperature Sensors
Country of OriginMade in India

Dwyer BTT-D04-1 Duct Mount Temperature Sensors


  • Output Signal: 4 – 20 mA, 
  • Probe Length: 4″
  • Brand Dwyer Part # BTT-D04-1
  • Model # BTT Series
  • Condition Brand New

Dwyer, BTT-D04-1, BTT Series 4 – 20 mA Duct Mount Temperature Transmitter with 4″ Probe

The Series BTT Temperature Transmitter Can Be Used For The Following Applications: Monitoring The Temperature Inside Air Ducts For HVAC, Transmitting Temperature Inside Water Lines For Chillers

Features
  • Transmitter Output Allows For Longer Wire Runs Than Standard Thermistor Sensors

Applications
  • Building Automation System Temperature Monitoring

Notifications

  • Item Is Non-Returnable Unless Defective

Declaration:
  • This Product Can Be Customized To Your Needs (Voltage,Ranges,Sizes,Additional Documents,Etc.). Please Contact Us Or Add To Quote If Any Specific Requirements Are Needed.

Technical Details

  • Temperature Sensor:Pt1000 RTD
  • Range:-40 to 140 °F (-40 to 60 °C)
  • Temperature Limits:-40 to 140 °F (-40 to 60 °C)
  • Accuracy:±0.5°C @ 25°C.
  • Response Time:100 msec
  • Wetted Materials:304 SS (probe), polycarbonate (housing), Neoprene (gasket)
  • Electrical Connection:Removable terminal block, knocks out for conduit fitting
  • Conduit Connection:1/2″ NPT
  • Probe Length:4″
  • Power Requirements:13 to 36 VDC
  • Output Signal:4 to 20 mA
  • Enclosure Rating:NEMA 4X (IP66)
  • Weight:5.11 oz (145 g)
  • Agency Approvals:CE
 

Temperature Transmitters Wholesale India

Universal Type Temperature Transmitter

 
Minimum Order Quantity12 Piece
Usage/ApplicationConverts all type of Thermocouple, RTD, Ohms, mV into 4 to 20mA analogue output
Model Name/NumberGALAXY
BrandGALAXY
Rated Supply Voltage10 to 32 VDC
Supply Voltage Limits10 to 32 VDC
Output Type2 Wire, 4 to 20mA
Part TypeUniversal Type Temperature Transmitter
Country of OriginMade in India
Input ValueAll type of Thermocouple, RTDs, Ohms, mV
Programming & CalibrationUser friendly software and a USB Calibrator
MountingHead Mount

Universal Type Temperature Transmitter

PC Programmable Head Mount Temperture Transmitter Which Converts All Tc, RTD, Ohms Mv Into a Scalable Analogue Signal Of 4 to 20ma.

Performance

  • 2-Wire Technology, 4 to 20ma Analogue Output.
  • High Accuracy In Total Ambient Temperature Range.
  • Internal Cold Junction Compensation.
  • Wide Voltage Supply Range.
  • Customer Specific Measurement Range Setting Or Expanded Setup.
  • Simple And User Friendly Software.
  • USB Communication.

INPUT

  • Type : TC, RTD, Ohms, mV
  • Measurement Ranges : -200 to 850°c
  • Connection Type : 3-Wire Connection

OUTPUT

  • Output Signal : 2 Wire, 4 to 20ma Scalable Analogue Signal Output

  • Current Alarm Output : 3. 6ma or 22ma When Sensor Damage Or Break.

 
TECHNICAL SPECIFICATIONS

  • Damp : 0-32s
  • Current Limit : ≤ 22ma
  • Saturation Current : Low 3. 8ma ; High 20. 6ma
  • Response Time : ≤ 0. 8s
  • Data Refresh Rate : 4 Times/Sec
  • Accuracy : ± 0. 1%
  • Stability :0. 01 ??c
  • Power Supply : 10 to 32 VDC 

Temperature Transmitters

 
Minimum Order Quantity12 Number
Usage/ApplicationConverts RTD & Thermocouple Input into linear scalable 4 to 20mA.
Model Name/NumberTR 213
BrandGALAXY
Voltage24 VDC
Rated Supply Voltage24 VDC
Output Type2 Wire,4 to 20mA
Country of OriginMade in India
Input ValueUniversal All type of RTD & Thermocouple Input

Temperature Transmitters

TT 210 is a Head Mount Non isolated universal temperature transmitter for resistance thermometers (RTD), thermocouples (TC), resistance & voltage (mV) which converts all these data signals into scalable 4 to 20mA analogue output signal.
 
This is a user programmable temperature transmitter which can be programmed for input signal from ANDROID SMART PHONE or LAPTOP  via data cable & user friendly operating software.
 
Performance Features:


  • 2 wire technology 4 to 20 mA analogue output.
  • High accuracy in total ambient temperature range.
  • An internal temperature sensor for active temperature compensation.
  • Wide voltage supply range.
  • Customer specific measurement range setting.
  • Simple & user friendly software
  • USB Communication


Technical Data

  • Input RTD, TC, OHM, mV
  • Output 4 to 20 mA
  • Supply voltage 7.5 to 45 VDC
  • Cold junction Internal
  • Influence of ambient Negligible
  • Load influence Negligible
  • Power supply influence Negligible
  • Resolution 0.3 uA
  • Installation Sensor head from B
  • Operation PC – programmable
  • Weight Approx. 35 GMS
  • Dimensions 44 MM × 22. 5 MM (Φ × H)
 

RTD PT 100 Temperature Transmitter

 
Minimum Order Quantity12 Piece
Usage/ApplicationUse for converting RTD Signal into scalable analog Input signal 4 to 20mA
Model Name/NumberRTD PT 100
BrandGALAXY
Voltage10 to 32 VDC
Accuracy+- 0.1%
Protection TypeRTD PT 100 Temperature Transmitter
Output Type4 to 20mA
Part TypeRTD PT 100 Temperature Transmitter
Country of OriginMade in India
ProgrammingCan be programmed with user freindly software & USB

RTD PT 100 Temperature Transmitter

PC Programmable Head Mount Temperture Transmitter Which Converts All Tc, RTD, Ohms Mv Into a Scalable Analogue Signal Of 4 to 20ma.

Performance

  • 2-Wire Technology, 4 to 20ma Analogue Output.
  • High Accuracy In Total Ambient Temperature Range.
  • Internal Cold Junction Compensation.
  • Wide Voltage Supply Range.
  • Customer Specific Measurement Range Setting Or Expanded Setup.
  • Simple And User Friendly Software.
  • USB Communication.

INPUT

  • Type : TC, RTD, Ohms, mV ( RTD PT 100 )
  • Measurement Ranges : -200 to 850°c
  • Connection Type : 3-Wire Connection

OUTPUT

  • Output Signal : 2 Wire, 4 to 20ma Scalable Analogue Signal Output

  • Current Alarm Output : 3. 6ma or 22ma When Sensor Damage Or Break.

 
TECHNICAL SPECIFICATIONS

  • Damp : 0-32s
  • Current Limit : ≤ 22ma
  • Saturation Current : Low 3. 8ma ; High 20. 6ma
  • Response Time : ≤ 0. 8s
  • Data Refresh Rate : 4 Times/Sec
  • Accuracy : ± 0. 1%
  • Stability :0. 01 ??c
  • Power Supply : 10 to 32 VDC 

Dwyer Instruments Distributors in India

2000-60PA-ASF Dwyer Instruments

 
Minimum Order Quantity12 Number
BrandDwyer USA
Measuring Range0-60 PA
Model Number2000-60PA-ASF
Usage/ApplicationIndustrial
Weight1 lb 2 oz (510 g),MP & HP 2 lb 2 oz (963 g)
Size4″ (101.6 mm) diameter dial face
Agency ApprovalRoHS
Process Connections1/8″ female NPT
Temperature Limits20 to 140 deg F (-6.67 to 60 deg C)

2000-60PA-ASF Dwyer Instruments Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment

Product Highlights

  • Bezel provides flange for flush mounting in panel.
  • Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
  • Precision litho-printed scale is accurate and easy to read.
  • Red tipped pointer of heat treated
  • aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
  • Pointer stops of molded rubber prevent pointer over-travel without damage.
  • “Wishbone” assembly provides mounting for helix, helix bearings and pointer shaft.
  • Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
  • Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
  • Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
  • Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
  • Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
  • Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test.
  • Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
 

Overpressure Protection:
Blowout plug is comprised of a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 PSIg (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023″ clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180″ of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component. O-ring seal for cover assures pressure integrity of case. Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

  • Range 0-60 Pa
  • Adjustable set flag
 

Series TDFS Thermal Dispersion Flow Switch

 
Minimum Order Quantity1 No
BrandDwyer USA
Agency ApprovalsCE
Housing Materials316 SS, 416 SS, Polycarbonate, Neoprene, And Acrylated Urethane
Enclosure RatingNEMA 4X (IP65)
Process Connection1/2″ NPT male
Electrical Connection4 conductor 22 AWG, 6′ (1.83 m) long with cable gland
Current ConsumptionAverage:93 mA, Peak: 300 mA
Power Requirement9 to 24 VDC
Response TimeApproximately 8 s
Pressure Limits300 psig (20.67 bar)
Wetted Materials316 SS, Polysulfone, and FKM
Setpoint Range0.5 to 10 ft/s (0.15 to 3.0 m/s)
Repeatability0.07 ft/s +3% of setpoint
Switching Current400 mA, derate 5 mA/ deg C above 23 deg C

Series TDFS Thermal Dispersion Flow Switch
  • OLD Modal TDFS-1-P-06 
  • NEW Modal TDFS-2-P-06

The Series TDFS2 Thermal Dispersion Flow Switch is a thermal flow switch that indicates whether the flow rate is above or below a user set flow rate. The unit incorporates two LED status indicators providing visual switch indication. The set flow rate (setpoint) is field adjustable and the unit has both NO and NC NPN outputs. See Figure 1 on catalog page for output and LED actions on change of flow

Product Applications:
  • Boiler Flow Proving
  • Hot Water Heaters
  • Chillers
  • Liquid Transfer Systems

Model – TDFS2-1-P-06
Thermal Dispersion Flow Switch, 316SS, 1/2″ NPT Process Connection, 6′ of Cable With Cable Gland.
 

TDFS-1-P-06 Thermal Dispersion Flow Switch

 
Minimum Order Quantity1 Number
BrandDwyer USA
Model Name/NumberTDFS-1-P-06
Material316 SS,416 SS,Polycarbonate,Neoprene,And Acrylated Urethane.
Agency ApprovalsCE
Switch Type1 NO NPN,1 NC NPN
Enclosure RatingNEMA 4X (IP65)
Process Connection1/2″ NPT male
Electrical Connection4 conductor 22 AWG,6′ (1.83 m) long with cable gland
Current ConsumptionAverage:93 mA,Peak: 300 mA
Switching Current400 mA,derate 5 mA/ deg C above 23 deg C
Power Requirement9 to 24 VDC
Response TimeApproximately 8 s
Pressure Limits300 psig (20.67 bar)
Typical Deadband0.1 ft/s +15% of setpoint
Repeatability0.07 ft/s +3% of setpoint
Setpoint Range0.5 to 10 ft/s (0.15 to 3.0 m/s)
Wetted Materials316 SS,Polysulfone,and FKM

TDFS-1-P-06 Thermal Dispersion Flow Switch
  • OLD Modal TDFS-1-P-06 
  • NEW Modal TDFS-2-P-06 

The Series TDFS2 Thermal Dispersion Flow Switch is a thermal flow switch that indicates whether the flow rate is above or below a user set flow rate. The unit incorporates two LED status indicators providing visual switch indication. The set flow rate (setpoint) is field adjustable and the unit has both NO and NC NPN outputs. See Figure 1 on catalog page for output and LED actions on change of flow

Product Applications:
  • Boiler Flow Proving
  • Hot Water Heaters
  • Chillers
  • Liquid Transfer Systems

Model – TDFS2-1-P-06
  • Thermal Dispersion Flow Switch, 316SS, 1/2″ NPT Process Connection, 6′ of Cable With Cable Gland.