Our Products

Top Cooling Coil Manufacturers In Pen Maharashtra

www.envirotechindustrialproduct.in

Top Cooling Coil Manufacturers In Pen Maharashtra

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

Features:

  • Sturdiness
  • Dimensionally Accurate
  • Corrosion Resistance

Coils:

  • They Are Manufactured From Annealed & Seamless Copper Tubes

Fins:

  • Aluminium used for fins are super slit fins. Copper Tubes Are Hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

Header:

  • M. S. Seamless Pipe or Copper Pipe Of Heavy Gauge

Casing

  • End covers, Top & Bottom Channels Are Manufactured of 20 Gauge of G. I Sheets for protection & long life
  • Venting & draining system: the coils require only one drain & one vent
  • The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

  • All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

  • Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

Our Range Includes:

  • Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
  • Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut
  • This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray
  • Electronic Coils. Industrial Coils
  • Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
  • We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
  • We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day
  • Procured from genuine vendors, we use good quality of raw material in the production of our gamut
  • The raw material includes 1 1/2′ C class and ISI duty ERW tubes
  • These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

www.envirotechindustrialproduct.in

Top Cooling Coil Manufacturers In Ghaziabad Uttar Pradesh

www.envirotechindustrialproduct.co.in

Top Cooling Coil Manufacturers In Delhi

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

Features:

  • Sturdiness
  • Dimensionally Accurate
  • Corrosion Resistance

Coils:

  • They Are Manufactured From Annealed & Seamless Copper Tubes

Fins:

  • Aluminium used for fins are super slit fins. Copper Tubes Are Hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

Header:

  • M. S. Seamless Pipe or Copper Pipe Of Heavy Gauge

Casing

  • End covers, Top & Bottom Channels Are Manufactured of 20 Gauge of G. I Sheets for protection & long life
  • Venting & draining system: the coils require only one drain & one vent
  • The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

  • All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

  • Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

Our Range Includes:

  • Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
  • Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut
  • This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray
  • Electronic Coils. Industrial Coils
  • Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
  • We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
  • We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day
  • Procured from genuine vendors, we use good quality of raw material in the production of our gamut
  • The raw material includes 1 1/2′ C class and ISI duty ERW tubes
  • These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

www.envirotechindustrialproduct.co.in

Top Cooling Coil Manufacturers In Delhi

www.envirotechindustrialproducts.co.in

Top Cooling Coil Manufacturers In Delhi

Our organization is instrumental in offering a wide range of Cooling Coil to our clients. The coil offered by us is manufactured in compliance with international quality parameters using best quality raw material and advance technology. It is widely appreciated among our clients due to its remarkable features. Apart from this, offered coil is available in varied specifications according to the requirements of the customers.

Features:

  • Sturdiness
  • Dimensionally Accurate
  • Corrosion Resistance

Coils:

  • They Are Manufactured From Annealed & Seamless Copper Tubes

Fins:

  • Aluminium used for fins are super slit fins. Copper Tubes Are Hydraulically/echanically expanded within fin collars to from permanent bond between fin & tube

Header:

  • M. S. Seamless Pipe or Copper Pipe Of Heavy Gauge

Casing

  • End covers, Top & Bottom Channels Are Manufactured of 20 Gauge of G. I Sheets for protection & long life
  • Venting & draining system: the coils require only one drain & one vent
  • The drain & vent fittings are conveniently located externally on the inlet & outlet connections Individual circuits have no high spots to trap water during the draining process

Testing:

  • All coils are tested at 300 psig pneumatic pressures under water for leakage test.

Size:

  • Chilled water cooling coil : 4/6/8 row, dx cooling coil: 4 / 6 / 8 row,heat transfer coil : 2 / 3 row

Our Range Includes:

  • Chilled Water Coils. Water Coils. We provide chilled water coils which is primarily used in the plus temperature cold rooms and chilled water is used as the refrigerant
  • Sourced from reliable vendors, we use good quality of 1/2″ copper tube in the production of our gamut
  • This chilled water coil is completed with: Cabinet,Fans,Drain tray,Ceiling suspension tray
  • Electronic Coils. Industrial Coils
  • Available with us is a wide range of best quality special industrial heat exchangers, that are known amongst clients for efficient properties, long functional life and low operational cost
  • We manufacture these industrial heat exchangers keeping into consideration the set industrial parameters. Ammonia Coils
  • We supply ammonia coil which is renowned among our valued clients for its effectual functioning. This coil is appropriate for the ice plant up to 50 tonne ice capacity per day
  • Procured from genuine vendors, we use good quality of raw material in the production of our gamut
  • The raw material includes 1 1/2′ C class and ISI duty ERW tubes
  • These are heavy duty receivers which are fabricated with the MS plate and have good molding Furthermore, it is manufactured in accordance with international standards and is delivered within specified time frame.

www.envirotechindustrialproducts.co.in

AHU Pre Filter In Puna Maharashtra

AHU Pre Filter In Puna Maharashtra

ENVIRO TECH INDUSTRIAL PRODUCTS Filters Has Achieved The Status of a Major Indian Air Filters And Clean Room Equipments Manufacturer and Regular Clients Include Most Of The Leading Pharmaceutical And Electronic Product Manufacturers,as Well as Nuclear Power, Atomic Energy And Space Research Establishments. Leading Consultants, User Industries And HVAC Turn-Key Engineering Companies Have Approved Our Products And Test Facilities. ENVIRO TECH INDUSTRIAL PRODUCTS FILTER Fine Filters Are Used For High Level Pre Filtration In Air Conditioning Of Paint Booths, Air Handling Units etc.

Fine Filters Are Available in The Range of 1 to 5 Micron:

  • Low Initial Pressure Drop.
  • Light In Weight And Easy To Handle.
  • High Cost / Performance Ratio.
  • High Dust Holding Capacity.
  • Cleanable / Washable.

Applications:

  • General Filtration For Air-Conditioning And Air Handling Units.
  • General Air Filtration And Pre-Filtration.
  • Spray Booths And Pre-Filtration.

Specifications:

  • Type: Flange or Box
  • Frame: Galvanized Steel, Aluminum Anodized,SS304
  • Separators: Aluminum
  • Filter Media: HDPE Media / Non Woven Synthetic Media

All These Filters Are Washable And Hence Reusable. Normal Sizes Available Are:

NoSizes In InchsFlow ( CFM )
1.20 x 12 x 6120
2.20 x 15 x 6520
3.20 x 20 x 6700
4.24 x 24 x 61000
5.24 x 24 


Additional Information:

  • Item Code: AHU-Pre-Filter-In-Puna-Maharashtra
  • Production Capacity: www.envirotechindustrialproduct.info
  • Delivery Time: www.envirotechindustrialproducts.info
  • Packaging Details: www.envirotechdelhi.com
www.envirotechdelhi.co.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 KAMLA NAGAR Delhi

www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 KAMLA NAGAR Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproduct.net
www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110007 मलका गंज Delhi

www.envirotechindustrialproductsindia.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110007 मलका गंज Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproductsindia.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 KAMLA NAGAR Delhi

www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 KAMLA NAGAR Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproduct.net
www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 Delhi

www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproduct.net
www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 Chandni Chowk Delhi

www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 KAMLA NAGAR Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproduct.net
www.envirotechindustrialproduct.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 DELHI SADAR BAZAR Delhi 

www.envirotechindustrialproducts.net

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110006 DELHI SADAR BAZAR Delhi 

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproducts.net