Our Products

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110005 KAROL BAGH Delhi 

www.envirotechindustrialproducts.com

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110005 KAROL BAGH Delhi 

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproducts.com

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110004 Rashtrapati Bhawan Delhi 

www.envirotechindustrialproduct.com

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110004 Rashtrapati Bhawan Delhi 

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the –HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproducts.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110003 South Delhi 

www.envirotechindustrialproducts.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110003 South Delhi 

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproducts.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110002 New Delhi Central

www.envirotechindustrialproduct.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110002 New Delhi Central

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

www.envirotechindustrialproduct.in

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110001 New Delhi

DWYER DIFFERENTIAL PRESSURE Gauge Dealers In 110001 New Delhi

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-0 Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SP Differential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00 Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AV Differential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AV Differential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0D Differential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPA Differential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CM Differential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MM Differential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PA Differential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPA Differential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MM Differential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PA Differential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CM Differential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MM Differential pressure gage, range 0-150 mm w.c.
2000-15CM Differential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPA Differential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MM Differential pressure gage, range 0-15 mm w.c.
2000-1KPA Differential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CM Differential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MM Differential pressure gage, range 0-200 mm w.c.
2000-20CM Differential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPA Differential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CM Differential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MM Differential pressure gage, range 0-250 mm w.c.
2000-250PA Differential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CM Differential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPA Differential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MM Differential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPA Differential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CM Differential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MM Differential pressure gage, range 0-300 mm w.c.
2000-300PA Differential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPA Differential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PA Differential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPA Differential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPA Differential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PA Differential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CM Differential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MM Differential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPA Differential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PA Differential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MM Differential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PA Differential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CM Differential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MM Differential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPA Differential pressure gage, range 0-8 kPa, minor divisions .20.
2001 Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SP Differential pressure gage, range 0-1″ w.c., with set point indicator.
2001AV Differential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001D Differential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002 Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SP Differential pressure gage, range 0-2″ w.c., with set point indicator.
2002AV Differential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002D Differential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003 Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003D Differential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004 Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004D Differential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005 Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SP Differential pressure gage, range 0-5″ w.c., with set point indicator.
2006 Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006D Differential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008 Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008D Differential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010 Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SP Differential pressure gage, range 0-10″ w.c., with set point indicator.
2010AV Differential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010D Differential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015 Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015D Differential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020 Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201 Differential pressure gage, range 0-1 psi, minor divisions .02.
2202 Differential pressure gage, range 0-2 psi, minor divisions .05.
2203 Differential pressure gage, range 0-3 psi, minor divisions .10.
2204 Differential pressure gage, range 0-4 psi, minor divisions .10.
2205 Differential pressure gage, range 0-5 psi, minor divisions .10.
2210 Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215 Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220 Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230 Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0 Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PA Differential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CM Differential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PA Differential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPA Differential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MM Differential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PA Differential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CM Differential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPA Differential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CM Differential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PA Differential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PA Differential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301 Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302 Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304 Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310 Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320 Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330 Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

GEMTECH SERIES G2000 HIGH ACCURACY DIFFERENTIAL PRESSURE GAUGE FROM NOIDA

GEMTECH SERIES G2000 HIGH ACCURACY DIFFERENTIAL PRESSURE GAUGE FROM NOIDA
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

  • Ambient Temperature –  -21 140 6 60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

Additional Information:

  • Item Code: GEMTECH SERIES G2000 HIGH ACCURACY DIFFERENTIAL PRESSURE GAUGE FROM NOIDA
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in

GEMTECH Model G2000-0 DIFFERENTIAL PRESSURE GAUGE

GEMTECH Model G2000-0 DIFFERENTIAL PRESSURE GAUGE

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

  • Ambient Temperature –  -21 140 6 60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

Additional Information:

  • Item Code: GEMTECH Model G2000-0 DIFFERENTIAL PRESSURE GAUGE
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in

GEMTECH Differential Pressure Gauge In Libaspur Industrial Area Delhi

GEMTECH Differential Pressure Gauge In Libaspur Industrial Area Delhi

Series G2000, GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

  • Ambient Temperature –  -21 140 6 60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 21 3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECH Differential Pressure Gauge Range 0-20 Kilopascals

GEMTECH Differential Pressure Gauge Range 0-20 Kilopascals

Series 2000, GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

  • Ambient Temperature –  -21???~140??????-6???~60??????
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.


Additional Information:

  • Item Code: GEMTECH-Differential-Pressure-Gauge-0-20-Kilopascals
  • Production Capacity: www.envirotechindustrialproduct.co.in
  • Delivery Time: www.envirotechindustrialproduct.in
  • Packaging Details: www.envirotechindustrialproducts.in

GEMTECH Differential Pressure Gauge Range 0-50 MM

GEMTECH Differential Pressure Gauge Range 0-50 MM

Series G2000, GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

  • Ambient Temperature –  -21 140 6 60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 21 3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.


Additional Information:

  • Item Code: GEMTECH-Differential-Pressure-Gauge-0-50-MM
  • Production Capacity: www.envirotechindustrialproducts.co.in
  • Delivery Time: www.envirotechindustrialproduct.co.in
  • Packaging Details: www.envirotechindustrialproduct.in