Category: CATEGORY LEDER DWYER Magnehelic Differential Pressure Gauge ALL INDIA

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE SPOTTED ON A COFFEE ROASTER

www.envirotechindustrialproduct.com

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE SPOTTED ON A COFFEE ROASTER

A DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE on a Coffee Roaster is Used to Measure and Monitor The Static Pressure and Airflow Inside The Roasting Drum. It Helps Maintain Roasting Consistency, Prevent Drum Blockages, And Ensure Safe Venting.

Here is What That Gauge is Specifically Doing On The Roaster:

1. Measuring Airflow and Vacuum (Draft)Most Drum Roasters Use An Exhaust Fan to Draw Hot Air And Chaff Away From The Beans, Creating a Negative Pressure (Vacuum) Inside The Drum. The DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE Connects Via Silicone Tubing To a Port in The Neck of The Roaster to Read This Negative Pressure in Unit like MM H₂O or Pascals (Pa).

2. Preventing Clogging and Drift As You Roast, Chaff, Oils, And Particulate Matter Build up in The Exhaust Piping And Cyclone. This Buildup Creates Airflow Resistance.

  • The Problem: If Airflow Resistance Increases, Less Heat is Transferred To The Coffee Beans And The Roast Profile Is Compromised.
  • The Gauge: By Tracking The Pressure Differential, You Know Exactly When Your Airflow is Dropping So You Can Clean The Exhaust.

3. Profile Reproduction Consistent Air Flow Equals Consistent Roasting. Instead of Blindly Quessing The Exhaust Fan’s Setting, The Pressure Gauge Provides Hard, Quantifiable Data. If a Past Roast Was Exceptional, You Can Adjust The Fan Damper Until The Pressure Gauge Reads The Exact Target Differential For That Specific Recipe.

Typical SpecificationsIf The Roaster is Utilizing a DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE (Likely From The Series G2000), it Operates Via a Magnetic Helix Mechanism That Functions Without Wheel Gears, Making It Highly Resistant To Vibration.

  • Common Range: Typically 0 to 25 MM H₂O or 0 to 50 MM H₂O For Standard Commercial And Craft Roasters.
  • Display: Usually a Large 4-Inch Analog Dial Featuring a Movable Limit Pointer Used as a Visual Bookmark.

Additional Information:

  • Item Code: DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE SPOTTED ON A COFFEE ROASTER
  • WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
  • www.envirotechindustrialproduct.com
  • www.envirotechindustrialproducts.com
  • www.envirotechindustrialproducts.net
  • www.envirotechindustrialproduct.net
  • www.envirotechindustrialproductsindia.in
  • www.envirotechindustrialproductsdelhi.com
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info

www.envirotechindustrialproduct.com

Control The Critical With The > Series 2000 Magnehelic Differential Pressure Gauge

www.envirotechindustrialproduct.info

Control The Critical With The > Series 2000 Magnehelic Differential Pressure Gauge

The Dwyer Instruments Series 2000 Magnehelic® Differential Pressure Gauge is The Industry Standard For Monitoring Low Differential Pressure, Providing Rapid, Accurate, And Reliable Measurements of Air And Non-Combustible Gases. Engineered to “Control The Critical,” This Gage is Essential For Applications Requiring Precise Environmental Control, Such as Clean Rooms, Medical, And HVAC Systems.

Key Features and Benefits 

  • Rapid Response: Patented Design Quickly Indicates Pressure Changes, Ensuring No Delay in Assessing Critical Situations.
  • High Accuracy: Standard accuracy is 2% of full scale, with High-Accuracy Models (-HA) Available at 1%.
  • Durable & Robust: The Die-Cast Aluminum Housing and Acrylic Cover are Built to Last, with IP67 Weatherproofing.
  • No Power Needed: Operates mechanically using a diaphragm And Magnet, Requiring Zero Electricity.
  • Easy-to-Read: Features a 4-inch Dial That Allows For Viewing From a Distance.
  • Frictionless Movement: Prevents Wear and Provides Long Service Life, Reducing Maintenance Downtime.
  • Versatile Mounting: Can Be Flush Or Surface Mounted, With Options For Pipe Mounting.


Primary Applications

The Series 2000 is Used to Measure Positive, Negative, or Differential Pressures in a Variety of Industries:

  • Filter Monitoring: Indication of Pressure Drop Across Air or Gas Filters in AHUs.
  • Room Pressurization: Monitoring Air Pressure in Clean Rooms, Laboratories, And Hospitals.
  • HVAC Systems: Monitoring Fan Pressure, Blower Vacuum, And Air Velocity.
  • Process Automation: Checking Gas-Air Ratio Controls And Automatic Valves.


Specifications & Customization

  • Pressure Ranges: Wide Variety of Models Available, Including 0-60 Pa, 0-25 mm H2O, and 0-0.5″ w.c..
  • Pressure Limits: Up to 35 psi (2.41 bar) for Standard Models.
  • Overpressure Protection: Features a Blow-Out Plug That Releases Internal Pressure at Roughly 25 PSIG.
  • Options: Available With Optional Stainless Steel Bezel, Higher Pressure Ranges, or High-Accuracy Models.

Additional Information:

  • Item Code: Control The Critical With The > Series 2000 Magnehelic Differential Pressure Gauge
  • WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
  • www.envirotechindustrialproducts.net
  • www.envirotechindustrialproduct.net
  • www.envirotechindustrialproductsindia.in
  • www.envirotechindustrialproductsdelhi.com
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com

www.envirotechindustrialproduct.info

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana

www.envirotechindustrialproducts.info

DWYER MAGNEHELIC DIFFERENTIAL PRESSURE GAUGE FOR Daultabad Industrial Area Gurgaon Haryana

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile Low Differential Pressure Gage With a Wide Choice of 81 Models And 27 Options To Choose From. Using Dwyer’s simple, frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents:  Click Here for Proposition 65 WARNING.


PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Model Description
2000-1.5KPA MAGNEHELIC Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05.
2000-10KPA MAGNEHELIC Differential Pressure Gage, Range 0-10 kPa, minor divisions .20.
2000-15KPA MAGNEHELIC Differential Pressure Gage, Range 0-15 kPa, minor divisions .50.
2000-1KPA MAGNEHELIC Differential Pressure Gage, Range 0-1 kPa, minor divisions .02.
2000-20KPA MAGNEHELIC Differential Pressure Gage, Range 0-20 kPa, minor divisions .50.
2000-25KPA MAGNEHELIC Differential Pressure Gage, Range 0-25 kPa, minor divisions .50.
2000-2KPA MAGNEHELIC Differential Pressure Gage, Range 0-2 kPa, minor divisions .05.
2000-30KPA MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0.
2000-3KPA MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa, minor divisions .10.
2000-4KPA MAGNEHELIC Differential Pressure Gage, Range 0-4 kPa, minor divisions .10.
2000-5KPA MAGNEHELIC Differential Pressure Gage, Range 0-5 kPa, minor divisions .10.
2000-8KPA MAGNEHELIC Differential Pressure Gage, Range 0-8 kPa, minor divisions .20.
2300-1KPA MAGNEHELIC Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

www.envirotechindustrialproducts.info

MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA

www.envirotechindustrialproducts.info

MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents:  Click Here for Proposition 65 WARNING.


PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

 

Model Description
2000-1.5KPA MAGNEHELIC Differential Pressure Gage, Range 0-1.5 kPa, minor divisions .05.
2000-10KPA MAGNEHELIC Differential Pressure Gage, Range 0-10 kPa, minor divisions .20.
2000-15KPA MAGNEHELIC Differential Pressure Gage, Range 0-15 kPa, minor divisions .50.
2000-1KPA MAGNEHELIC Differential Pressure Gage, Range 0-1 kPa, minor divisions .02.
2000-20KPA MAGNEHELIC Differential Pressure Gage, Range 0-20 kPa, minor divisions .50.
2000-25KPA MAGNEHELIC Differential Pressure Gage, Range 0-25 kPa, minor divisions .50.
2000-2KPA MAGNEHELIC Differential Pressure Gage, Range 0-2 kPa, minor divisions .05.
2000-30KPA MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa, minor divisions 1.0.
2000-3KPA MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa, minor divisions .10.
2000-4KPA MAGNEHELIC Differential Pressure Gage, Range 0-4 kPa, minor divisions .10.
2000-5KPA MAGNEHELIC Differential Pressure Gage, Range 0-5 kPa, minor divisions .10.
2000-8KPA MAGNEHELIC Differential Pressure Gage, Range 0-8 kPa, minor divisions .20.
2300-1KPA MAGNEHELIC Differential Pressure Gage, Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

  • Item Code: MAGNEHELIC > DIFFERENTIAL PRESSURE GAUGE < FOR KINFRA INDUSTRIAL PARK KERALA
  • WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
  • www.envirotechindustrialproduct.net
  • www.envirotechindustrialproductsindia.in
  • www.envirotechindustrialproductsdelhi.com
  • www.envirotechindustrialproduct.info
  • www.envirotechindustrialproducts.info
  • www.envirotechdelhi.com
  • www.envirotechindia.co.in

www.envirotechindustrialproducts.info

Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka

www.envirotechindia.info
Mgneahelic Differential Pressure Gauge FROM Malur Industrial Area Karnataka

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential,Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no Power Required)

Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From. Using Dwyer’s Simple,frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures–either positive,negative vacuum or differential.The design resists shock,vibration,over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents:  Click Here for Proposition 65 WARNING.


PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication.
Model Description
2000-1.5KPA MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa,minor divisions .05.
2000-10KPA MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa,minor divisions .20.
2000-15KPA MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa,minor divisions .50.
2000-1KPA MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa,minor divisions .02.
2000-20KPA MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa,minor divisions .50.
2000-25KPA MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa,minor divisions .50.
2000-2KPA MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa,minor divisions .05.
2000-30KPA MAGNEHELIC Differential Pressure Gage, Range 0-30 kPa,minor divisions 1.0.
2000-3KPA MAGNEHELIC Differential Pressure Gage, Range 0-3 kPa,minor divisions .10.
2000-4KPA MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa,minor divisions .10.
2000-5KPA MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa,minor divisions .10.
2000-8KPA MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa,minor divisions .20.
2300-1KPA MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa, minor divisions .02.
2300-3KPA MAGNEHELIC Differential Pressure Gage, Range 1.5-0-1.5 kPa, minor divisions .10.

Additional Information:

www.envirotechindia.info

CATEGORY Leder Dwyer / Magnehelic Differential Pressure Gauge

www.envirotechindustrialproducts.in

CATEGORY Leder Dwyer / Magnehelic Differential Pressure Gauge

 

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES Indicate Positive,Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no Power Required)

 

Select the Series 2000 Magnehelic® Gage for a versatile low Differential Pressure Gage With a Wide Choice of 81 Models and 27 Options To Choose From.Using Dwyer’s Simple, frictionless Magnehelic® Gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative vacuum or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67.Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale,located below in the Product Configurator.Also included with the–HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

California Residents:Click Here for Proposition 65 WARNING.


PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
Model Description
2000-1.5KPA MAGNEHELIC Differential Pressure Gage,Range 0-1.5 kPa, minor divisions .05.
2000-10KPA MAGNEHELIC Differential Pressure Gage,Range 0-10 kPa, minor divisions .20.
2000-15KPA MAGNEHELIC Differential Pressure Gage,Range 0-15 kPa, minor divisions .50.
2000-1KPA MAGNEHELIC Differential Pressure Gage,Range 0-1 kPa, minor divisions .02.
2000-20KPA MAGNEHELIC Differential Pressure Gage,Range 0-20 kPa, minor divisions .50.
2000-25KPA MAGNEHELIC Differential Pressure Gage,Range 0-25 kPa, minor divisions .50.
2000-2KPA MAGNEHELIC Differential Pressure Gage,Range 0-2 kPa, minor divisions .05.
2000-30KPA MAGNEHELIC Differential Pressure Gage,Range 0-30 kPa, minor divisions 1.0.
2000-3KPA MAGNEHELIC Differential Pressure Gage,Range 0-3 kPa, minor divisions .10.
2000-4KPA MAGNEHELIC Differential Pressure Gage,Range 0-4 kPa, minor divisions .10.
2000-5KPA MAGNEHELIC Differential Pressure Gage,Range 0-5 kPa, minor divisions .10.
2000-8KPA MAGNEHELIC Differential Pressure Gage,Range 0-8 kPa, minor divisions .20.
2300-1KPA MAGNEHELIC Differential Pressure Gage,Range 0.5-0-0.5 kPa,minor divisions .02.
2300-3KPA MAGNEHELIC Differential Pressure Gage,Range 1.5-0-1.5 kPa,minor divisions .10.

 

Additional Information:

  • Item Code: CATEGORY Leder Dwyer Magnehelic Differential Pressure Gauge
  • WhatsApp No.9871034100,9868958924,9650264867,9716640145,8368866030,8368801023
  • www.envirotechindustrialproducts.co.in
  • www.envirotechindustrialproduct.co.in
  • www.envirotechindustrialproduct.in
  • www.envirotechindustrialproducts.in
  • www.envirotechindustrialproduct.com
  • www.envirotechindustrialproducts.com
  • www.envirotechindustrialproducts.net

www.envirotechindustrialproducts.in

Aerosense Differential Pressure Transmitter

Aerosense Differential Pressure Transmitter

Minimum Order Quantity12 No
Model Name/NumberDPT-R8-3W
BrandAerosense
Country of OriginMade in India

Aerosense Differential Pressure Transmitter  Series DPT-R8-3W

Series DPT-R8-3W Differential Pressure Transmitter Monitors Pressure
The Series DPT-R8-3W Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure. The compact package is loaded with features such as 8 selectable ranges, 2 selectable outputs, optional display and optional Auto-Zero feature which electronically adjusts the transmitter zero at predetermined time intervals (every 10 minutes). The Auto-Zero adjustment takes 4 seconds.

The AZ calibration eliminates all output signal drift due to thermal, electronic or mechanical effects. Optional display and Auto-Zero feature available.

Product Applications:

 

  • Building pressure monitoring
  • Duct pressure monitoring
  • Filter condition monitoring