envirotechindustrialproducts

Elementor #2024

MAGNEHELIC GAUGE Shape Plate
Rs 450 / Piece
Wetted Parts	SS 304 .
Application/Usage	MAGNEHELIC GAUGE .
Model Name/Number	Techno Sales India .
Material	Steel
I Deal In	New Only
Condition	New
Connection	New .
Brand	Techno Sales India .
MAGNEHELIC GAUGE Shape Plate Sheet —- SS 304 MACK —- Integerated Engineers India Application Product——-MAGNEHELIC GAUGE Thickness Of Sheet——1 MM

Magnehelic Gauge L Plat
Rs 450 / Piece
Wetted Parts	SS 304 .
Application/Usage	MAGNEHELIC GAUGE .
Model Name/Number	Techno Sales India .
Material	Steel
I Deal In	New Only
Brand	Techno Sales India .
Magnehelic Gauge L Plat Sheet —- SS 304 MACK —- Integerated Engineers India Application Product——-MAGNEHELIC GAUGE Thickness Of Sheet——1 MM

Brand

DWYER USA

Very Low Differential Pressure Gauge
Rs 450 / Piece
Very Low Differential Pressure Gauge Features: 4 Pressure Measurement from 6mmwc upto 100mmwc 4 Dial Sizes 4-1/2” (115mm) 4 Aluminium Case 4 Accuracy +-2% FS. Applications Filter Status Duct Static Pressure Clean Room Pressure Building Pressure Fan and Blower Pressure Paint Booths Dust Collectors Glove Box Pressure Bubbler Systems Cabinet Purging Specifications: Type: Inductive Pressure Sensor For: Strain Gauge Pressure Transmitter Output Signal Type: Digital Type Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Elementor #2019

Dwyer Make Magnehelic Differential Pressure Gauge
Rs 3,600 / Piece
Usage/Application	Industrial .
Color	Black
Connection	New .
Model Name/Number	2000 .
Brand	DWYER USA .
Dwyer Make Magnehelic Differential Pressure Gauge Series 2000 Magnehelic® Differential Pressure GagesIndicate Positive, Negative or Differential, Accurate within 1% No Power Required Low Cost Used in Isolation/ Hospital Environments and Temporary Units (no power required) Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Please see Series AT22000 for ATEX approved. Product Applications Filter Monitoring Air Velocity with Dwyer Pitot Tube Blower Vacuum Monitoring Fan Pressure Indication Duct, Room or Building Pressures Clean Room Positive Pressure Indication Additional Information: Item Code: Dwyer-Make-Magnehelic-Differential-Pressure-Gauge

Elementor #2008

DP Nozzle
Rs 300 / Piece
Application	Industrial .
Packaging Type	100 NOS .
I Deal In	New Only .
Material	Steel
Connection	New .
Material Grade	SS 304 .
Model	Techno Sales India .
Brand	Techno Sales India .
DP Nozzle As a Patron Centric Organization, We Provide Clients With The Premium Quality of Differential Pressure Gauge Nozzle. Used For Monitoring The Air Velocity Of Different Industrial Applications, The DP Gauge Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality, Make The Techno Sales India DP Gauge Nozzle highly Demanded. Features: Ideal For Air Velocity Monitoring Applications Compact Design Easy Operations And Calibrations Material – SS 304

DOP Port Nozzle
Rs 450 / Piece
Material	SS 304 .
Code Number	DOP Port Nozzle .
Size	M 8 x 45 mm long .
Gross Weight	50-80 g
Weight	50-80 g .
Packaging Type	Packet .
Usage/Application	DOP .
Item Code	DOP Port Nozzle .
I Deal In	New Only .
Country of Origin	Made in India .
Brand	Techno Sales India .
DOP Port Nozzle The Dop Port That Brought By Us Is a Half Threaded Clamp Along With Attractive Matte Finishing. This Type Of Port Is Provided In Different Sizes Which Also Be Custom Built In Order To Meet Variegated Demands Of Our Valued Clients. Such a Product Is Sturdily Manufactured By Making Use Of Selected Grade Stainless Steel And Technically Advanced Machinery At Our Unit Under The Keen Observation Of Domain Experts. The Dop Port Is Applauded For Features Like Strength, Durability, Functionality, Quality And A Long Life. Product Details : Material : Stainless Steel Material Grade : SS304 Brand : Techno Sales India Finish : Polished Length : M 8 x 45 MM Long Pack Type : Box Additional Information: Item Code: DOP-Port-Nozzle

Magnehelic Gages Nozzle SS 304
Rs 300 / Piece
Application	Industrial .
Material	Mild Steel
Connection	New .
Model	Magnehelic Gages Nozzle SS 304 .
Brand	Techno Sales India .
Magnehelic Gages Nozzle SS 304 As a Patron Centric Organization, We Provide Clients With The Premium Quality of Magnehelic Gages Nozzle Used For Monitoring The Air Velocity Of Different Industrial Applications, The Magnehelic Gages Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality,Techno Sales India Make The Magnehelic Gages Nozzle Highly Demanded. Features: Ideal For Air Velocity Monitoring Applications Compact Design Easy Operations And Calibrations Material – SS 304 Mack – Techno Sales India Additional Information: Item Code: Magnehelic-Gages-Nozzle-SS-304

Differential Pressure Gauge Nozzle SS 304
Rs 300 / Piece
Application	Industrial .
Material	Mild Steel
Connection	New .
Material Grade	SS 304 .
Brand	Techno Sales India .
Differential Pressure Gauge Nozzle SS 304 As a Patron Centric Organization, We Provide Clients With The Premium Quality of Differential Pressure Gauge Nozzle. Used For Monitoring The Air Velocity Of Different Industrial Applications, The DP Gauge Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality, Techno Sales India Make The DP Gauge Nozzle highly Demanded. Features: Ideal For Air Velocity Monitoring Applications Compact Design Easy Operations And Calibrations Material – SS 304 Additional Information: Item Code: Differential-Pressure-Gauge-Nozzle-SS-304

Differential Pressure Gauge Nozzles
Rs 300 / Piece
Weight	10-30 G .
Application	Industrial .
Model Name/Number	Techno Sales India .
Material	Mild Steel
Connection	New .
Brand	Techno Sales India .
Differential Pressure Gauge Nozzles As a Patron Centric Organization, We Provide Clients With The Premium Quality of Differential Pressure Gauge Nozzle Used For Monitoring The Air Velocity Of Different Industrial Applications, The DP Gauge Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality, Make The Techno Sales India DP Gauge Nozzle highly Demanded. Features: Ideal For Air Velocity Monitoring Applications Compact Design Easy Operations And Calibrations Material – SS 304

Differential Pressure Gauge Nozzle
Rs 300 / Piece
Usage/Application	Industrial .
Material	Mild Steel
Connection	New .
Model Name/Number	Techno Sales India .
Brand	Techno Sales India .
Differential Pressure Gauge Nozzle As a Patron Centric Organization, We Provide Clients With The Premium Quality of Differential Pressure Gauge Nozzle. Used For Monitoring The Air Velocity Of Different Industrial Applications, The DP Gauge Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality, Make The ENVIRO TECH DP Gauge Nozzle highly Demanded. Features: Ideal For Air Velocity Monitoring Applications Compact Design Easy Operations And Calibrations Material – SS 304

Elementor #1969

Pump Controller
Rs 3,200 / Piece
Voltage	240 V AC .
Input Impedance	Current = 10 ohms, Voltage = 5 K ohms. .
Power Consumption	7.5 VA maximum. .
Display	Two 4-digit, 7 segment 0.56″ high LEDs. .
Display Resolution	1 Count. .
Weight	16 oz (454 g). .
Brand	DWYER USA .
Front Panel Rating	Meets UL Type 4X (IP66). .
Pump Controller The Mercoid MPC Junior Pump Controller provides versatile level control in a standard 1/4 DIN package. Designed for use with almost any style level transmitter the unit displays the present level and main set point value. Incorporated in the MPC Jr. is programmable level differential for on/off control of one or two pumps, valves, or other devices through two SPDT relays. Also featured are two additional programmable alarm contacts with front alarm light indication. The MPC Jr. is flexible and incorporates a user-friendly programming menu. The front face meets NEMA 4X for outdoor panel mounting. Features: Selectable pump alternation when used with two pumps to minimize pump wear Integral 24 VDC power supply for transmitter User selectable security lock-out of programming and/or set points Optional process input retransmission as a current (4 to 20 mA) or voltage (2 to 10 VDC) analog signal Analog output on pump “on” condition for activation of separate pump run time meters Specification: Inputs : 4 (or 0) to 20 mA DC or 2 (or 0) to 10 VDC selectable. Output Ratings : Control Relays: SPDT, rated 10 A @ 240 VAC res., 1/4 hp @ 120 VAC, 1/3 hp @ 240 VAC; Alarm Relays: SPST, 3 A @ 240 VAC res., 1/10 hp @ 120 VAC; Others: 15 VDC @ 20 mA for output one and output two. Control Type : On/off, reverse (pump out) or direct (pump in) acting. Power Requirements : 100 to 240 VAC nominal, +10%-15%, 50 to 400 Hz, single phase; 132 to 240 VDC nominal, +10%-15%. Accuracy : 0.25% of span, ±1 least significant digit. Memory Backup: Nonvolatile memory (no batteries required). Serial Communications : Optional RS-232 or RS-485 with Modbus® protocol. Ambient Operating Temperature/RH : 14 to 131°F (-10 to 55°C); 0 to 90% up to 104°F (40°C) non-condensing, 10 to 50% at 131°F (55°C) non-condensing. Loop Power Supply (isolated) : 24 VDC @ 50 mA, regulated. Applications: Water and wastewater Sump and sludge pits, clarifiers, digesters Chemical storage tanks Oil tanks Reservoirs Options: RC Retransmission of input, 4 to 20 mA. Add suffix -RC. RV Retransmission of input, 0 to 10 VDC. Add suffix -RV. 232 RS-232 Modbus® -RTU Serial Communications. Add suffix -232. 485 RS-485 Modbus® -RTU Serial Communications. Add suffix -485. Additional Information: Item Code: Series-MPCJR

Tuning Fork Level Switch
Rs 16,500 / Piece
Condition	New .
Model No	Series-TFLS .
Pressure	145 psig (10 bar). .
Brand	DWYER USA .
Weight	5.5 lb (2.5 kg) .
Wetted Materials	316 SS. .
Ambient Temperature	-4 to 140 Degree F (-20 to 60 Degree C). .
Power	90 to 265 VAC, 50/60 Hz; 24 VDC. .
Power Consumption	4 VA. .
Electrical Rating	5 A 230 VAC. .
Conduit Connection	3/4″ female NPT. .
Process Connection	1-1/2″ male NPT. .
Tuning Fork Level Switch Series TFLS Tuning Fork Level Switch is ideal for level control of powders and fine grained solids, especially those with a low bulk density. The TFLS incorporates a piezoelectric crystal that vibrates the fork at its natural frequency. When the fork comes in contact with material, the vibration is dampened and the switch changes state. As the fork becomes free of material, the switch changes back to its normal state. Featured in the TFLS is user-selectable fail-safe operation of the contacts. Unit is not affected by vibration from conveying systems, motors, or the movement of material. It can be mounted in any position and is available with factory built extensions for mounting on the top of the storage vessel. Series TFLS is easy to use, with no calibration required and with no mechanical moving parts there is no routine maintenance required. The TFLS is unaffected by the dielectric constant of the sensed material, making it superior to a capacitance level switch for applications where the dielectric constant is too low, where there is more than one material being used in one vessel, and when material moisture content can change. The level switch is also good for applications when the bulk density is too low for a rotating paddle level switch. It can also detect granular material submerged in liquids of low viscosity, for example sand, gravel, or polyester chips in water. Features: No Calibration Required. Vibrating Fork Design: Great for low bulk density and low dielectric constant products. Will detect products down to 1.8 lb/ft3 (30 g/l). Universal Power Supply: One model works with 90 to 265 VAC and 24 VDC. Adjustable Sensitivity: Can be set to ignore lighter bulk density products and only detect heavier products, such as sand in water. Status Indication: External LED switch indicator, and internal indicators for normal and alarm status. Failsafe Setting: Output switch can be set for Normally Open or Normally Closed condition on loss of power. Time Delay: Prevent false alarms from material surges. No Maintenance Required. Any Position Mounting: Available with factory built extensions for mounting on the top of the storage vessel. Specification: Service : Dry powder or bulk materials compatible with wetted materials. Can detect bulk materials submerged in liquid. Sensitivity : Minimum bulk density of 1.8 lb/ft³ (30 g/l), maximum particle size 0.4″ (10 mm). Enclosure : Aluminum, powder coated. Enclosure Rating : Weatherproof, NEMA 4X. Switch Type : SPDT. Electric Connections : Screw terminals. Indication Lights : External: red LED; Internal: green and red LED’s. Sensing Delay : (Maximum) covered probe: 2 s.; uncovered probe: 3 to 7 s. Time Delay : Separate settings for covering and uncovering the probe. Adjustable from 2 to 20 seconds. Applications: Lime, styrofoam, dry cereals, sugar, animal feed, milk powder, flour, insulation, cement, paper shavings, plastic granules, sawdust, carbon black, light fibers, detergent powders, dyes, chalk, silica, sand, wood chips Chemical processing Pulp and paper processing Mining Food and beverage Additional Information: Item Code: Series-TFLS

Capacitive Level Transmitter

Rs 8,500 / Piece

Pressure Range

100 psi (6.9 bar).

Range

100 psi (6.9 bar).

Application

Industrial

Usage/Application

Industrial

Model

Series-CRF2

Weight

6′ rod type 3.6 lb (1.63 kg).

Brand

DWYER USA

Capacitive Level Transmitter

The Series CRF2 is a level transmitter providing a two-wire 4 to 20 mA output to indicate level of liquids, powders and bulk materials. State of the art sensing technology in the CRF2, using impulse RF admittance measurement provides excellent accuracy and stability. The CRF2 senses capacitance changes resulting from the height of the material in the tank between the probe and the tank wall. In non-metallic tanks or tanks that do not have the wall parallel to the probe a ground reference must be used.

The CRF2 comes with either a rigid or flexible probe depending on application installation need and probe length required. Featured in the CRF2 is easy push button calibration of zero and span. Custom order the CRF2 to any length probe that you need for your application. FEP covered probe is ideal for use with corrosive media. This technology also provides immunity to external RF sources like walkie-talkies and cell phones as well as minimal interference with radio communication or other electronic systems.

Features:

State of the art sensing technology, uses impulse RF admittance measurement which provides excellent accuracy and stability
Comes with either a rigid or flexible probe depending on application installation need and probe length required
Easy push button calibration of zero and span
Any length probe can be customer ordered for any specific application
FEP covered probe is ideal for use with corrosive media
Immune to external RF sources like walkie-talkies and cell phones as well as minimal interference with radio communication or other electronic systems

Specification:

Service : Liquids, powders, and bulk materials compatible with wetted materials.
Wetted Materials : Standard: rod/cable: FEP; connection: 316 SS. Ground Option: rod/cable and connection: 316 SS; cable spacers: PVC. Flange Option: material of flange.
Accuracy : ±0.5 pF or ±0.25% of span, whichever is greater.
Repeatability : ±0.25 pF or ±0.1% of span, whichever is greater.
Temperature Limits : Ambient: -40 to 185°F (-40 to 85°C); Process: -40 to 250°F (-40 to 121°C).
Electrical Connection : Screw terminal.
Process Connection : Standard: 3/4″ NPT male. Optional: See Catalog page.
Enclosure Rating : NEMA 4X (IP66) weathertight/corrosion resistant.
Spark/Static Protection : 106 ohm dissipation resistance with spark gap. Surge current to 100 A max.

Applications:

Pulp and paper processing
Chemical processing
Food and beverage
Aggregates
Plastics
Mining

Other Details:

Model	Description
CRF2-WR01T-072	Capacitive level transmitter, weatherproof, rod probe type, 3/4″ male NPT, 72″ insertion length.
CRF2-WR01T-096	Capacitive level transmitter, weatherproof, rod probe type, 3/4″ male NPT, 96″ insertion length

Additional Information:

Item Code: Series-CRF2

Conductivity Level Probe
Rs 10,700 / Piece
Process Connection	1/2″ NPT. .
Pressure Unit	87 psi (6 bar). .
Application	Industrial .
Material	Wetted Materials Probe End 430SS; Insulator ceramic; Fitting nickel-plated iron; Seal silic .
Model	Series-CLP .
Temperature Unit	392 Degree F (200 Degree C). .
Brand	DWYER USA .
Conductivity Level Probe Series CLP Conductivity Level Probes are used to determine the presence of a conductive liquid at a set level by sensing conductivity. The Series CLP is coupled with the Series TSWB Temperature Level Controller for a complete level control system. These probes allow for the measurement of conductivity between the probe fitting and end, which is isolated by a ceramic insulator, or between the probe ends of two probes. The CLP can be mounted in any orientation in a tank, tee fitting, or any compatible threaded port. The probe end is solid stainless steel allowing substantial resistance to heat and corrosion. Features: Mount in any orientation in a tank, tee fitting, or any compatible threaded port for easy installation Probe end is solid stainless steel allowing substantial resistance to heat and corrosion Ceramic insulator allows for high degree of isolation Applications: Water level monitoring Tank level control Process automation Single point level service Open tanks Closed vessels

Continuous Level Transmitter
Rs 8,500 / Piece
Resolution	1/4″ (6.35 mm). .
Pressure Unit	Buna-N Floats 150 psig (10 bar); SS Floats 300 psig (21 bar). .
Application	Industrial .
Model	Series-CLT .
Brand	DWYER USA .
Continuous Level Transmitter Continuous Output Level Transmitters provide up to the minute tank level monitoring. Customize level transmitters to meet application requirements. Transmitters can be configured for 4 to 20 mA or proportional voltage output, stainless steel or Buna-N stem and floats, and lengths up to 72″ (183 cm). Features: Customized stem length, actuation point, distance between floats, and lead wire lengths 4 to 20 mA or proportional voltage output outputs continuous level indication Specification: Temperature Limits : Buna-N Floats: 180°F (82°C) in water, -40 to 230°F (-40 to 110°C) in oil; SS Floats: -40 to 230°F (-40 to 110°C). Pressure Limits : Buna-N Floats: 150 psig (10 bar); SS Floats: 300 psig (21 bar). Power Requirements : Proportional Voltage Output Models: 10 to 30 VDC; 4 to 20 mA Output Models: 10 to 40 VDC. Loop Resistance : 1.4 kΩ maximum. Electrical Connections : Proportional Voltage Output Models: 24″ (16 cm) free leads #22 AWG, TFE jacketed; 4 to 20 mA Output Models: junction box. Specific Gravity : Buna-N Floats with SS or Brass Stem: 0.55 minimum; SS Floats with SS Stem: 0.75 minimum. Applications: General purpose level monitoring Low specific gravity applications Gas and oi Maintenance/Repair: Regular maintenance of the total system is recommended to assure sustained optimum performance. These devices are not field repairable and should be returned to the factory if recalibration or other service is required. After first obtaining a Returned Goods Authorization (RGA) number, send the unit freight prepaid to the following. Please include a clear description of the problem plus any application information available. Additional Information: Item Code: Series-CLT

Electric Bin Vibrator

Rs 8,000 / Piece

Condition

New

Powder

120 VAC (60 hz).

Model

Series-EBV

Brand

DWYER USA

Electric Bin Vibrator

The Series EBV Electric Bin Vibrator incorporates adjustable force features without creating irritating noise. The low amperage draw at 120V reduces power consumption and makes the vibrators usable in any application. The EBV eliminates drawbacks associated with non-adjustable constant force units. The conventional fix force units are sized with narrow operating limits and may not move material from bins or pack material in containers if the moisture content changes. The adjustable force feature increases application flexibility; reducing equipment downtime and labor expense. The EBV is capable of running continuously at 100% force output without overheating or mechanical damage.

Applications:

Bin Vents
Bag Houses
Dust Collectors

Installation:

Before installation, especially if the apparatus has been stored in the warehouse, remove the side covers from the weights and check to make sure the shaft turns freely.
The EBV electric vibrator can be installed in any position. Fix the electric vibrator on a rigid area to avoid induced vibrations causing breakage or cracks; if this is not possible, use plates and ribbing for reinforcement.
The mounting surface must be level (max 0.25 mm/ max 0.01 in) so that the vibrator feet rest uniformly and perfectly in contact with the mounting surface, to avoid internal stresses which can lead to breakage of the vibrator feett.
To mount the electric vibrator, use bolts, nuts and flat washers.
Remember that most breakdowns are due to incorrect mounting.
Anchor the electric vibrator using a chain with a length and cross section suitable for supporting the electric vibrator with a maximum fall of 15 cm (6 inches), in case of accidental detachment.

Maintenance:
Before carrying out any maintenance or cleaning on the machine, make sure the conditions are safe.

Other Details:

Dimensions – inches (mm)
Model	A	B	C	D	E
EBV-1	5-1/8 (130)	5-23/64 (136)	8-5/16 (211)	4-11/64 (106)	2-43/64 (68)
EBV-2	5-1/8 (130)	5-23/64 (136)	8-5/16 (211)	4-11/64 (106)	2-43/64 (68)
EBV-3	5-1/8 (130)	6-17/64 (159)	9-3/32 ( 231)	4-11/64 (106)	2-43/64 (68)
EBV-4	6-7/64 (155)	6-23/32 (170)	10-23/64 (263)	4-7/16 (113)	5-1/8 (130)

Additional Information:

Item Code: Series-EBV

Level Switches Horizontal / Specialty
Rs 12,500 / Piece
Warranty	YAS .
Packaging Type	1 .
Weight	95 g .
Model	Series-F6-F7 .
Condition	New .
Level Switches Horizontal / Specialty The SERIES F6 & F7 Horizontal Float Level Switches are designed to mount through the walls of tanks and other vessels. Internally mounted models F6-HPS-11, F6-MHS and F7-SS6 are secured to the wall of the tank or vessel from the inside while model F6-HPS-21 is mounted from the outside (externally). Models F7-HSS and F6-MHS2 can be installed internally or externally. The SERIES F6 & F7 Specialty Float Level Switches are designed for unique applications. Model F7-SS5B/BNC can be used with viscous liquids or liquids with suspended metal particles. Use model F7-LL for low level detection (≥ 5/8″). The non-intrusive bottle style F7-EB mounts completely outside the tank at the actuation level. Suspend model F7-WBB in stand pipes or sumps for leak detection or drop into wells for ground-water monitoring. Features: Hermetically sealed reed switches are actuated by magnets permanently bonded inside the float arm and can be easily adapted to open or close a circuit on rising or falling levels Specification: Series F6 Service : Compatible liquids. Temperature Limit : F6-SS & F6-MHS: -4 to 257°F (-20 to 125°C). F6-HPS-11, 21, 31: 14 to 176°F (-10 to 80°C). Pressure Limit : F6-SS & F6-MHS: 218 psi (15 bar). F6-HPS-11, 21, 31: 116 psi (8 bar). Enclosure Rating : General purpose. Switch Type : SPST Hermetically sealed reed switch, reversible for NO or NC. Electrical Rating : 20 VA: 0.17 A @ 120 VAC, 0.08 A @ 240 VAC. Mounting Orientation : F6-SS: vertical ±20°, F6-MHS/HPS: horizontal with index arrow pointing up or down. Weight : F6-HPS-11, 21: 1.23 oz (38 g), F6-MHS-31: 1.41 oz (40 g), F6-MHS: 3.35 oz (95 g), F6-SS: 1.59 oz (45 g). Series F7 Electrical Rating (Maximum) : F7-SB, -SS2 AC: 25 VA, 1.0A, 200 V DC: 10 W, 1.0 A, 200 V F7-PP, -BT, -HSS, -MHS AC: 25 VA, 1.0 A, 200 V DC: 10 W, 1.0 A, 200 V F7-HPS-1, -2 AC: 25 VA, 1.0 A, 200 V DC: 10 W, 1.0 A, 200 V (F7-HSS is rated explosion-proof for Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III). Mounting Connection : 1/8″ NPTM (all vertical mount), 1/2″ NPTM (F7-HPS-2, F7-HSS), M16 x 2 (F7-HPS-1), 1/2″ x 13 thread (F7-MHS) Wire Leads : 22 AWG x 18″ (46 cm), vertical mount models; 22 AWG x 39″ (1 m), models F7-HPS-1, -2; 22 AWG x 24″ (61 cm), models F7-HSS, -MHS. Magnet : Alnico (F7-SB, -PP, -BT, -HPS), ceramic (F7-SS2, -HSS, -MHS). Weight : 2 oz. (58 g), F7-SB; 1.2 oz. (34g), F7-SS2; 0.8 oz. (23 g), F7- PP; 0.7 oz.. (20 g), F7-BT; 1.5 oz. (43 g), F7-HPS-1; 2 oz. (57 g), F7- HPS-2 and -MHS; 3 oz. (94 g), F7-HSS. Applications: Water level monitoring Oil level control Chemical level indication Sumps Stand pipes Tank level contro Additional Information: Item Code: Series-F6-F7

Level Switches Vertical

Rs 3,150 / Piece

Pressure

150 psig (10 bar) / 750 psig 52 bar

Brand

DWYER USA

Usage/Application

Water level monitoring,Oil level control

Float Diameter

35 MM

Model

SeriesF6-F7

Temperatures Range

105 to 149 Degree C

Level Switches Vertical

The SERIES F6 & F7 compact level switches combine low cost and reliability with fast, simple installation. Hermetically sealed reed switches are actuated by magnets permanently bonded inside the float and can be easily adapted to open or close a circuit on rising or falling levels. Vertical mount models are shipped with normally open switch contacts which close as the float rises toward the mounting threads. Reverse switch action by removing the float, rotating it end-for-end and replacing it on the stem. Vertical models mount internally, oriented within 30° of vertical, or select optional fittings for external mounting. Switch ratings are suitable for many solid state control systems and monitors or alarms. Simple relay interfaces can be used for higher current applications.

Features:

Combine low cost and reliability with fast, simple installation
Hermetically sealed reed switches are actuated by magnets permanently bonded inside the float and can be easily adapted to open or close a circuit on rising or falling levels
Easily reverse switch action by removing the float, rotating it end-for-end and replacing it on the stem
Vertical models mount internally, oriented within 30° of vertical, or select optional fittings for external mounting
Switch ratings are suitable for many solid state control systems and monitors or alarms
Simple relay interfaces can be used for higher current applications

Applications:

Water level monitoring
Oil level control
Chemical level indication
Sumps
Stand pipes
Tank level control
High viscosity liquids

Specification:

Dimensions In Inches (Mm)
Model	A) Stem Length	(B) Float Diameter	(C) Float Height	(D) Actuation from Hex
F7-SB	2.75 (70)	1.38 (35)	1.13 (29)	1.2 (31)
F7-SS2	2.06 (52)	1.0 (25)	1.0 (25)	0.73 (19)
F6-SS	2.17 (55)	1.11 (28)	1.11 (28)	–
F7-MPP	1.63 (41)	0.63 (16)	0.63 (16)	0.47 (12)
F7-PP	2.18 (55)	1.18 (30)	1.0 (25)	0.69 (18)
F7-BT	2.18 (55)	1.18 (30)	1.0 (25)	0.69 (18)
F7-K	2.13 (54)	1.0 (25)	1.0 (25)	0.65 (17)
F7-C11	2.06 (52)	1.0 (25)	1.0 (25)	0.56 (14)
F7-C21	2.06 (24)	1.0 (25)	1.0 (25)	0.56 (14)
F7-PVC	3.44 (87)	1.5 (38)	1.81 (46)	0.75 (19)

Additional Information:

Item Code: SeriesF6-F7

Mini Tuning Fork Level Swich
Rs 13,500 / Piece
Power Supply	10 mA 12 to 24 VDC; 0.5 W (max.). .
Power	12 to 55 VDC. .
Temperature	-40 to 212 Degree F (-40 to 100 Degree C) .
Model Number	Model-CTF .
Application	Food and beverage .
Brand	DWYER USA .
Condition	New .
Mini Tuning Fork Level Swich The Model CTF Mini Tuning Fork Level Switch is an ideal choice for level control of powders. The CTF incorporates a piezoelectric crystal that vibrates the fork at its natural frequency. When the fork comes in contact with a material, the vibration is dampened and the switch changes state. As the fork becomes free of material, the switch changes back to its normal state. The unit is not affected by vibration from conveying systems, motors, or the movement of material. Its compact size and DIN connection allow for application in places a larger tuning fork level switch may not be suitable, providing great versatility. The Model CTF is easy to use with no calibration required, and no mechanical moving parts mean no routine maintenance. The CTF is not affected by the dielectric constant of the sensed material, making it superior to a comparable capacitance level switch for applications where the dielectric constant is low, more than one material is being used in the single vessel, and when material moisture content can change. The level switch is also great for applications when the bulk density is too low for a rotating paddle level switch, making it the ideal choice for low density bulk solids and liquids. Comes standard with a user friendly PNP/NPN configurable output. Features: DIN connection and compact size allows for application in places a larger tuning fork level switch may not be suitable, providing great versatility No mechanical moving parts with no routine maintenance required Unaffected by the dielectric constant of the sensed material, making it superior to a capacitance level switch for applications where the dielectric constant is too low, where there is more than one material being used in one vessel, and when material moisture content can change Ideal for applications where the bulk density is too low for a rotating paddle level switch Specification: Service : Dry powder compatible with wetted materials. Sensitivity : Min. bulk solid density: 4.4 lb/ft3 (70 g/l). Wetted Materials : Tuning Fork: 316 L SS; Process connection: 304 SS. Electrical Rating : 350 mA (max) @ 12 to 55 VDC. Conduit Connection : Valve plug DIN 43650. Process Connections : 1″ male NPT. Indication Lights : External red LED. Sensing Delay : Max. covered probe: 1 to 3 s.; Uncovered probe: 1 to 3 s. Applications: Lime, styrofoam, dry cereals, sugar, animal feed, milk powder, flour, insulation, cement, paper shavings, plastic granules, sawdust, carbon black, light fibers, detergent powders, dyes, chalk, silica, sand, wood chips Chemical processing Pulp and paper processing Mining Food and beverage Additional Information: Item Code: Model-CTF

Mini View Rite Level Indicator
Rs 21,000 / Piece
Application	Industrial .
Brand	DWYER USA .
Condition	New .
Material	316 L SS .
Model	Series-MVR .
Usage/Application	Pharmaceuticals .
Mini View Rite Level Indicator Miniature custom level indicators are ideal for high-visibility level indication in tight spaces. All stainless steel housing provides rugged durability with a diameter of only 1-1/4″ (32 mm). Select the mounting type that will best fit your application and an indication length of up to 96″ (244 cm). View-Rite level indicators incorporate a pressure tight housing with internal float that magnetically activates external level indication flags, switches, or transmitter. Features: Low maintenance with all 316 L SS wetted material Environmentally friendly with process liquid contained inside a pressure tight housing Durable 316 L SS provides maintenance-free operation Requires no external power to operate Brightly colored flags are easy to read even at long distances Switch Modules: Clamp onto the level indicator, SPST, rated .17A @ 120 VAC, .08A @ 240 VAC, .13A @ 120 VDC, .06A @ 240 VDC. MVR-S1 — Maximum temperature is 300°F (147°C). Polysulfone with 1/4″ female NPT conduit connection. MVR-S2 — Maximum temperature is 750°F (399°C). 316 SS with 1/2″ male NPT conduit connection. MVR-S3 — Maximum temperature is 750°F (399°C). Explosion-proof terminal box with 1/2″ female NPT conduit connection. Applications: Pharmaceuticals Medical equipment Food and beverages Semiconductor manufacturing Boilers Additional Information: Item Code: Series-MVR

Paddle Level Switch
Rs 7,500 / Piece
Power/Voltage	15 A 120/230 VAC. .
Brand	DWYER USA .
Switch Type	SPDT or optional DPDT snap switch .
Certification	YAS .
Model	Series-PLS .
Usage/Application	Food and beverage .
Paddle Level Switch Incorporated in the design of the PLS is a magnetic drive that is time proven by decades of use in our Mark Series valve position indicator product line. A 1 rpm synchronous motor rotates the paddle, utilizing a magnetic drive. As product builds up, the paddle is impeded from moving and the resulting motor torque activates the output switches and stops the motor. A spring mechanism reactivates the motor and returns the switches to normal state when the product no longer impedes the paddle rotation. Standard construction is weatherproof with explosion-proof optional, and the unit can be side or top mounted. The PLS is designed with the industry standard 1-1/4″ male NPT connection and mounting flanges.. Features: Magnetic drive that isolates and completely seals the control head from the process and environment preventing material or dust from entering the control head. Motor shuts-off when paddle stalls increasing motor life, preventing motor burnout, and decreasing power usage. Slip clutch design enabled by the magnetic drive that prevents damage to motor and drive mechanism from sudden or excessive loading on the paddle. Status indication light on weatherproof models. Screw cover on the enclosure for easy access with no worries about losing bolts or screws. Modular design to allow field installation of any paddle, flanges, shaft extensions, or shaft guards. Flexible coupling available for protection of the paddle and drive from side loads, surges or impacts. Recommended for top mount applications with shaft extension and applications with large or heavy materials. Specification: Service : Dry powder or bulk materials compatible with wetted materials. Sensitivity : Minimum material density of 5 lb/ft³ (80 kg/m³), maximum of 200 lb/ft³ (3200 kg/m³). Wetted Materials : Paddles: 316 SS. Exposed Shaft: 316 SS. Shaft Seal: PTFE. Mounting Boss: Aluminum. Flexible Coupling: 316 SS. Mounting Flanges: Carbon Steel or 316 SS. Shaft Extension and Shaft Guards: Galvanized Steel or 316 SS. Temperature Limits : Standard Construction: Process: -40 to 300°F (-40 to 148.9°C), Ambient: -40 to 185°F (-40 to 85°C); High Temperature: Process: -40 to 500°F (-40 to 260°C), Ambient: -40 to 185°F (-40 to 85°C). Power Requirement : Select by part number: 110-120 VAC, 230 VAC, 24 VAC, 48 VAC, or 12 VDC. Power Consumption : Weatherproof models: 5 watts, Explosion-proof models: 3 watts. Enclosure Rating : Weatherproof (W, WH construction): NEMA 4X, Explosion-proof (E, EH construction): NEMA 4X and rated for Class I, Div. 1 & 2, Groups C & D, Div. 1 & 2, Groups E, F, & G. Electric Connections : Screw terminals. Indication Light : Red LED that activates when switch is made or when switch is not made with RL option (not available on Explosion-proof models). Time Delay Relay Option : Five field adjustable ranges from 0-1 to 0-31 minutes. (RL option not available, DPDT option not available with 230 VAC time delay). Weight : Control head only: 4 lb (1.81 kg). Applications: Mining Food and beverage Silos Hoppers Options: Contact the factory for pricing of shaft extensions, protective shields, and other options. More detailed information available in our Measurement & Control for Powder, Dust, and Bulk Materials Catalog. Additional Information: Item Code: Series-PLS

Piston Vibrator
Rs 2,700 / Piece
Temperature	212 Degree F (100 Degree C). .
Brand	DWYER USA .
Noise Level Range	APV-C 60-75 dBA; APV-I 80-115 dBA. .
Supply Pressure	29 to 87 psi (2 to 6 bar). .
Model	Series-APV .
Usage/Application	Bin vents,Bag houses,Dust collectors .
Piston Vibrator Series APV-C Piston Vibrators are air cushioned to provide low noise. This makes it suitable for quiet area applications. It is a good solution to prevent clogs on tank walls and material delivery problems. It can also be applied on vibrating separators and conveyors. Working Principle APV-C: There are air-breathing tubes located in both ends of the cylinder. Compressed air pushes the piston from one side to the other side. Vibration power arises as the piston moves back and forth in the body. Air cushion at both ends produced by the to-and-fro compression will keep the piston from striking the body. Therefore, the piston will not produce much noise. Series APV-I impact version piston vibrators can help to get rid of dust or material accumulated inside of pipes or tanks. It allows direct impact on the tank with low specific gravity and high moisture materials inside. It also helps prevent material build-up, pipe clogs, and rust. Working Principle APV-I: There are air-breathing tubes located in both sides of the cylinder. Compressed air pushes the piston away from one side and to the other side. Vibration arises when the piston moves back and forth in the body. Air cushion at the top end is produced by the to-and-fro compression. This will keep the piston from striking onto the body top. The piston will strike directly on the bottom side of the body to produce a strong impact. How IT Operates: There are air-breathing tubes located in both ends of the cylinder. Compressed air pushes the piston from one side to the other. Vibration power arises when the piston moves back and forth in the body. In APV-C air cushion at both ends produced by the to-and-fro motion will keep the piston from striking the body. Therefore, the piston will not produce much noise. In APV-I, air cushion at the top end is produced by the to-and-fro compression. This will keep the piston from striking onto the body top. The piston will strike directly on the bottom side of the body to produce a strong impact. Features: High strength aluminum alloy housing Frequency and amplitude of vibration can be adjusted as needed Low frequency and direct impact models available Air Connection : 1/8″ BSPT female with 1/4″ OD push to connect adapter on APV-C1 and APV-I1. 1/4″ BSPT female with 1/4″ OD push to connect adapter on APV-C2, APV-C3, APV-I2 and APV-I3. Also includes muffler for exhaust port. Applications: Bin vents Bag houses Dust collectors Maintenance: Upon final installation of the Series APV Piston Vibrator, no routine maintenance is required. A periodic check of the system calibration is recommended. The Series APV is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return good authorization number before shipping. Additional Information: Item Code: Series-APV

Single Stage Top Mount Displacer Type Level Control
Rs 21,000 / Piece
Condition	New .
Usage Application	Pumping stations,Foaming liquids.
Warranty	Required .
Cable Length	10 ft (3 m) standard. Optional up to 100 ft (30.5 m). .
Model	Series-190 .
Pressure Limit	125 psig (8.6 bar) .
Conduit Connection	3/4″ female NPT. .
Process Connections	4″ 125 cast iron flange .
Brand	DWYER USA .
Mounting Orientation	Vertical .
Single Stage Top Mount Displacer Type Level Control One of our most versatile level controls, the Series 190 can be used on all types of tank or sump level control applications. Mercoid® Displacer Controls use displacers that do not float on the surface of liquids, but are suspended on a coil spring. They work on the principle that submerged solids weigh less in liquids, and as the liquid level rises and their weight decreases, the tension on the spring by which they are suspended is decreased. Because they work on a different principle than float type liquid level controls, displacers are not affected by turbulence or pressure, and are excellent for applications with viscous or dirty liquids. Features: Extremely versatile design Displacers are suspended on a coil spring and do not float on the surface of liquids and are unaffected by turbulence or pressure Excellent for applications with viscous or dirty liquids Specification: Service : Compatible liquids. Wetted Materials : Cable, spring and stops: 316 SS. Optional Inconel® spring; Displacers: Porcelain. Optional 304 SS, 316 SS, or carbon graphite. Temperature Limits : Ambient Temperature: 32 to 200°F (0 to 93°C);Process Temperature: 32 to 200°F (0 to 93°C). Enclosure Rating : NEMA 4X. Optional general purpose or explosion-proof. Switch Type : SPDT snap switch, hermetically sealed snap switch, or mercury switch. Optional DPDT or two stage. Electrical Rating : Snap switch: 12 A @ 120 VAC, 5 A @ 240 VAC, 0.5 A @ 125 VDC resistive, 0.25 A @ 250 VDC resistive; Hermetically sealed snap switch: 5 A @ 120 VAC, 5 A @ 240 VAC, 5 A @ 30 VDC resistive; Mercury switch: 4 A @ 120 VAC/DC, 2 A @ 240 VAC/DC. Higher contact ratings available for the mercury switch. Electrical Connections : Screw terminal. Set Point Adjustment : Adjustable by moving displacers, see dimension chart for minimum and maximum values. Specific Gravity : Standard is 1.0. Specify when ordering by replacing 1.0 in model number with specific gravity setting desired. Settable range is 0.5 to 1.2. Weight : General purpose or watertight enclosure with 4″ 125# cast iron flange approximately 28 lb (12.7 kg); Explosion-proof or explosion-proof/vapor-proof approximately 32 lb (14.5 kg). Applications: Pumping stations Foaming liquids Sanitary/sewage treatment Paints & varnishes Agitated or turbulent fluids Heavy oil refineries Chemical plants Power generating stations Viscous or dirty liquids Additional Information: Item Code: Series-190

Submersible Level Transmitter
Rs 15,000 / Piece
Weight	4.3 lb (2.0 kg). .
Output Signal	4 to 20 mA DC, two wire.
Application	Industrial .
Accuracy	+/-0.25% FS (includes linearity, hysteresis, and repeatability). .
Model	Series-PBLT2-PBLTX .
Response Time	50 msec. .
Wetted Materials	316 SS, 316L SS, Epoxy, cable ETFE or polyurethane. .
Pressure Limit	2X FS. .
Brand	DWYER USA .
Power Requirement	PBLT2 13 to 30 VDC, PBLTX 10 to 28 VDC. .
Submersible Level Transmitter PBLT2 and PBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids. The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier. Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer. Features: Durable cage design with large diameter 316 SS diaphragm seal that is non-clogging and damage resistant to floating solids Incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty) on PBLT2 models Maintenance free filter eliminates particulate or water droplets from entering the transducer UL approved intrinsically safe on PBLTX models for use in hazardous locations when used with the proper barrier 270 lb (122.5 kg) tensile strength shielded and vented cable Excellent chemical compatibility NPT connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of a A-625 hanging loop for attaching a chain for pulling out of the installation Specification: Temperature Limit : PBLT2: 0 to 200°F (-18 to 93°C), PBLTX: 0 to 176°F (-18 to 80°C). Compensated Temperature Range : PBLT2: 0 to 180°F (-18 to 82°C), PBLTX: 0 to 176°F (-18 to 80°C). Thermal Effect : ±0.02% FS/°F. Loop Resistance : 900 Ω. Electrical Connection : Wire pigtail. Mounting Orientation : Suspended in tank below level being measured. Electrical Protection : PBLT2: Lightning and surge protection, PBLTX: none. Applications: Wastewater Sludge pits, clarifiers, digesters Alum tanks Chemical storage tanks Oil tanks Lime slurry Sumps Reservoirs Additional Information: Item Code: Series-PBLT2-PBLTX

Tilt Switch Probe

Rs 6,250 / Piece

Temperature

4 to 104 Degree F (-20 to 40 Degree C).

Switch Type

SPST, Normally Closed.

Cable Length

25′ (7.6 m)

Probe Length

Standard 9″ (23 cm); Compact 6″ (15 cm).

Actuation Angle

25 Degree from vertical.

Material

Steel or 302/304 SS.

Enclosure Rating

Meets NEMA 4 (IP56).

Weight

Standard 4.75 lbs (2.15 kg); Compact 2.5 lbs (1.13 kg).

Brand

DWYER USA

Tilt Switch Probe

The Series LTS Tilt Switch probes are able to sense either the presence or absence of material when other sensors won’t work due to bin vibration, or actual walls aren’t available for mounting other types of measuring units. The probes are designed for use where the bulk material to be sensed is exposed or open. Typical applications include high or low level detection in large hoppers, silos, crushers, or trippers, high level control under stackers, and detection of plugged conditions at conveyor transfer points. Series LTS probes can also be used to detect the presence or absence of bulk material on belt conveyors, on chutes to indicate product flow, and to aid in loading rail cars or trucks.

All probe models are airtight, dust tight, and waterproof. The compact probe should be used for applications involving small bins and hoppers where space is limited, while the heavy duty probe should be used for applications where a heavy duty abrasion-resistant probe is necessary.

Features:

All probe models are airtight, dust tight, and waterproof
Compact probe should be used for applications where space is limited and standard, heavy duty probe should be used for applications where an abrasion resistant probe is necessary

Specification:

Electrical Rating : < 50 mA @ 12 VDC as supplied by Series LTC controller.
Electrical Connection : 3-wire +12 VDC (supplied by controller).
Surrounding : Epoxy encapsulated.
Mounting Orientation: Vertical.

Applications:

Large hoppers
Silos
Crushers
Trippers
Stackers
Conveyors

Installation Instructions:
Probe Installation:
The probe should be suspended using a fixed support, such as a mounting bracket or S-hook, at a position where it will easily intercept the bulk material at the desired indication point. There must be a free flow of material both to and away from the probe. In some installations, it is necessary to install a baffle or shield above the probe assembly to protect it from product surges.

Wiring:
All wiring should be in compliance with applicable Local, Federal, and State codes. Probe connection cable is 16-3 type SO and is attached to the probe. Probe cable length is supplied as specified per order, and may be spliced.

Maintenance:
The Series LTS Tilt Switch Probes are not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Other Details:

Model	Description
LTS-N11G-025	Tilt Switch Probe, standard size, steel probe, 25′ cable.
LTS-N12G-025	Tilt Switch Probe, standard size, SS probe, 25′ cable.
LTS-N21G-025	Tilt Switch Probe, compact size, steel probe, 25′ cable.
LTS-N22G-025	Tilt Switch Probe, compact size, SS probe, 25′ cable

Additional Information:

Item Code: Series-LTS

Ultrasonic level Sensor
Rs 23,000 / Piece
Resolution	0.079″ (2 mm). .
Range	18′ (5.5 m).
Weight	3 lb (1.36 kg). .
Accuracy	+/-0.2% .
Model No	Model-ULSL .
Blind Zone	8″ (20 cm). .
Beam Width	3″ (7.62 cm). .
Process Temperature	20 to 140 Degree F (-7 to 60 Degree C) .
Ambient Temperature	-31 to 140 Degree F (-35 to 60 Degree C). .
Pressure Limits	30 psi (2 bar)..
Brand	DWYER USA .
Power Requirement	.12 to 28 VDC.
Ultrasonic level Sensor The Model ULSL Ultrasonic Level Sensor provides non-contact, continuous ultrasonic level measurement of fluids for short range applications. Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions. The Model ULSL has failsafe logic that is easily configured to custom applications via free software removing the need for target calibration. Using the free software, the Model ULSL can be programmed to transmit an output signal as well as set the four relays for control applications. This rugged design comes with a NEMA 6P submersible enclosure rating to ensure a long lasting unit. Features: Via free software, units can be programmed to transmit an output signal and operate four relays for control applications Provides reliable, accurate, and non-contact level measurement of compatible liquids Non-contact technology offers no moving parts to wear, jam, corrode, or get coated like contact technologies Mapping software makes effective measuring surface only a 3″ (76.2 mm) diameter column with no concerns of ladders, pipes, or other tank intrusions in the remaining sound cone Ultrasonic technology paired with automatic temperature compensation provides accurate and reliable measurements in almost all conditions Fail-safe logic is easily configured to custom applications via free software removing the need for target calibration Full NEMA 6P submersible enclosure rating to ensure excellent product durability Specification: Wetted Materials : Sensor: PVDF; O-ring: FKM. Output Signal : 4 to 20 mA, 2-wire. Invert: 4 to 20 mA or 20 to 4 mA; Fail-safe: 4 mA, 20 mA, 21 mA, 22 mA, or hold last. Loop Resistance : 400 Ω max. Electrical Connections : 4′ (1.2 m) 9 conductor shielded cable. Contact Type : 4 SPST relays. Contact Rating : 1 A max @ 28 VDC max. Deadband : Selectable (no hysteresis, 1/4″, 1/2″, 1″, 1/2 cm, 1 cm, 2 cm, 5 cm or not available). Process Connection : Process Connection: 2″ NPT, 2″ BSPP (optional). Enclosure Rating : NEMA 6P (IP68). Enclosure Material : Polycarbonate; Gland: TPE. Mounting Orientation : Vertical. Memory : Non-volatile. Failsafe : Contact: Power loss: Hold last contact; Power on: Open, close, or last contact. Programming : Free PC software download (USB adapter required). Applications: Water and wastewater Pulp and paper processing Sump and process tanks Chemical processing Food and beverage Additional Information: Item Code: Model-ULSL

Ultrasonic Level Transmitter
Rs 19,000 / Piece
Display Type	6 character LCD. .
Range	24.6′ (7.5 m), 32.8′ (10 m).
Application	Industrial .
Blind Zone	Under 8″ (20 cm). .
Beam Width	3″ (7.6 cm) diameter. .
Process Temperature	-4 to 140 Degree F (-20 to 60 Degree C). .
Power Requirement	18 to 28 VDC (2 wire). .
Max Loop Resistance	250 Ohms at 24 VDC. .
Conduit Connection	1/2″ NPT female (two) or optional M20. .
Ambient Temperature	-40 to 140 Degree F (-40 to 60 Degree C) .
Model No	Series-ULT .
Process Connection	2″ NPT male or optional BSPT. .
Weight	4.0 lb (1.8 kg). .
Accuracy	+/-0.2% FS. .
Output Signal	4 to 20 mA or 20 to 4 mA (Two-wire). .
Resolution	0.079″ (2 mm)
Brand	DWYER USA .
Usage/Application	Industrial
Ultrasonic Level Transmitter Series ULT Ultrasonic Level Transmitter provides reliable, accurate, non-contact measurement of liquid levels. Ultrasonic non-contact technology offers no moving parts to wear, jam, corrode, or get coated like contact technologies. Mapping software makes effective measuring surface only a 3″ diameter column. No concerns with ladders, pipes, or other tank intrusions in the remaining sound cone. Unit is FM approved explosion-proof making it ideal for use in hazardous locations. The ULT features easy programming with 6 digit LCD display and simple menu structure. Output range is adjustable with choices of inputting tank dimensions or just fill and empty the tank while calibrating and it automatically scales to levels it senses. Window cover allows early viewing of display. Fail-safe output options and diagnostic capabilities makes the ULT a good choice for critical applications. Features: Provides reliable, accurate, and non-contact level measurement of compatible liquids Non-contact technology offers no moving parts to wear, jam, corrode, or get coated like contact technologies Mapping software makes effective measuring surface only a 3″ (76.2 mm) diameter column with no concerns of ladders, pipes, or other tank intrusions in the remaining sound cone FM approved explosion-proof making it ideal for use in hazardous locations Easy programming with 6 digit LCD display and simple menu structure Output range is adjustable with choices of inputting tank dimensions or by filling and emptying the tank while calibrating and it automatically and scaling to levels it senses Window cover allows easy viewing of display Fail-safe output options and diagnostic capabilities Specification: Wetted Materials : Sensor: PVDF; Process Connection: 303 SS; O-ring: fluoroelastomer. Pressure Limits : 30 psi (2 bar) up to 25°C (77°C). Above 25°C (77°F), rating decreases 1.667 psi per 1°C increase. See Catalog page. Electrical Connections : Screw terminal. Conduit Connection : 1/2″ NPT female (two) or optional M20. Process Connection : 2″ NPT male or optional BSPT. Enclosure Rating : Weatherproof meets NEMA 4X, explosion-proof rated Class I, Div. 1, Groups B, C, D; Class II/III, Div. 1, Groups E, F, G. Mounting Orientation : Vertical. Failsafe : On lost echo after 30 seconds, user selectable to 4, 20, 21, 22 mA or last signal. Memory : Non-volatile. Applications: Water and wastewater Pulp and paper processing Chemical processing Food and beverage Operating Principle: Ultrasound is sound with a frequency greater than the upper limit of human hearing; approximately 20 kilohertz. The ULT contains an ultrasonic transducer and a temperature sensing element. The ultrasonic transducer transmits ultrasound wave pulses through air directed towards the material of which the level is desired. The ultrasound waves then reflect off of the material as an echo and travel back to the transducer. The level of the material is determined by the transit time of the ultrasound wave pulse from the sensor to material and for the echo to come back to the sensor. The speed of sound through air is sensitive to the air temperature. The ULT uses the temperature sensing element to compensate for air temperature changes. The ULT incorporates patented surface processing technology and adaptive signal processing. Surface processing technology filters out all signal obstructions that may be in the tank creating an effecting beam diameter of only 3 ̋ (7.6 cm). Additional Information: Item Code: Series-ULT

Vibrating Rod Level Switch
Rs 10,500 / Piece
Warranty	YAS .
Pressure	150 psi (10 bar).
Model No.	VRLS-01 .
Condition	New .
Switch Type	SPDT .
Brand	DWYER USA .
Weight	4.4 lb (2.0 kg). .
Wetted Materials	304 SS .
Power Requirement	20 to 250 VAC/VDC, 50/60 Hz. .
Power Consumption	15 VA. .
Conduit Connection	1/2″ female NPT x 2. .
Process Connection	1″ male NPT. .
Sensing Delay	0 to 6 S .
Vibrating Rod Level Switch The Model VRLS Vibrating Rod Level Switch is an economical choice in level detection of powders and bulk solids. The VRLS utilizes a piezoelectric crystal that vibrates the rod at a natural frequency. Once the rod comes in contact with the material, the vibration will be dampened and the switch will change state. Once the rod is uncovered by the material, the switch will revert to its normal state. Perfect for silo or hopper applications, its probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection. Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities. The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure. Features: Probe design allows for self-cleaning, ensuring no build-up or bridging of material and accurate detection No mechanical moving parts with no routine maintenance required Sensitivity is adjustable for detection ranging from large granular material to small powders with low bulk densities The failsafe mode can be set for failure on high level or failure on low level using a selector switch in the enclosure Unaffected by the dielectric constant of the sensed material, making it superior to a capacitance level switch for applications where the dielectric constant is too low, where there is more than one material being used in one vessel, and when material moisture content can change Ideal for applications where the bulk density is too low for a rotating paddle level switch Specification: Service : Dry powder or bulk materials compatible with wetted materials. Sensitivity : Min. bulk density of 20 lb/ft3 (320 kg/m3). Temperature Limits : Ambient: -40 to 140°F (-40 to 60°C), Process: -40 to 176°F (-40 to 80°C). Enclosure : Aluminum, painted. Electrical Rating : 5 A @ 250 VAC. Electrical Connections : Screw terminals. Indication Lights : Internal: green and red LED. Applications: Lime, styrofoam, dry cereals, sugar, animal feed, milk powder, flour, insulation, cement, paper shavings, plastic granules, sawdust, carbon black, light fibers, detergent powders, dyes, chalk, silica, and wood chips. Installation: When installing VRLS, the following should be noted. Top Mounting: Avoid installing directly under substance inlet to prevent damage to the probe. Angle of mounting should be taken into consideration during installation to prevent false alarm. Side Mounting: It is highly recommended to use a shield to protect the vibrating probe level switch. The cover should be parallel to the probe and of the same length. Incline the device at approximately 20 degrees when installing. Keep conduit facing downward to prevent moisture from getting inside the housing while in operation. All wiring should employ 18 AWG cable. Additional Information: Item Code: Model-VRLS

Water Leak Detector
Rs 15,000 / Piece
Application	Industrial .
Switch Type	Electrical Connections
Enclosure	ABS and acrylic. .
Battery Life	2 years. (approx.) .
Model	Series-WD2 .
Brand	DWYER USA .
Water Leak Detector The very affordable Series WD2 detects leaking conductive fluids and alarms to prevent the leak from creating costly damage. The WD2 relies on the electrical conductivity of water to change the resistance across the two contacts located at the base of the enclosure. Model WD2-BP2 is battery powered, provides audible alarm, LED visual alarm, and a SSR output. Also featured is a low battery warning. WD2-LP units are line powered and include a green power indication LED. Mounting bracket A-154 is perfect for use in leak pans where it is desired to raise the sensing level above the bottom of the pan to eliminate nuisance alarms. The bracket can be mounted to the bottom of the pan and the height of the WD2 adjusted anywhere up to 1.75 ¿¿ (44.5 mm). Or the bracket can be used to mount the WD2 to the side of the drip pan or any side wall at desired height. Specification: Electrical Rating : WD2-BP2: Pilot duty rating 250 mA @ 24 VDC maximum; WD2-LP: 1 A @ 24 VAC/DC, 1 A @ 120 VAC. Audible Alarm : BP Models: 10 seconds on, 30 seconds off. LP Models: Continually on. None on D2 model. LED Alarm : BP Models: 10 seconds off, 30 seconds on. Two red LED’s; LP Models: Continually on. Eight red LED’s. Power Requirements : BP models: 3 V CR2450 lithium metal battery, installed non-functional, user replaceable; LP Models; 11 to 27 VAC/DC. Power Consumption : BP Models: 0.9 mA steady state non-alarm, 3.0 mA during audible alarm, 2.4 mA during LED alarm; LP Models: DC power: 25 mA typical and 75 mA maximum, AC power: 30 mA typical and 85 mA maximum. Weight : WD2-BP2: 3.5 oz; WD2-LP: 4.3 oz; WD2-LP-D: 5.6 oz. Operation: Model WD2-BP2 is battery powered, provides audible alarm, red LED visual alarm, and a SSR output. When conductive fluid is detected, the audible alarm will turn on for 10 seconds followed by a 30 second visual alarm repeated until the unit no longer detects fluid. The SSR will change state from open to closed. When the battery gets low the WD2 gives a warning by turning on the visual and audio alarms. WD2-LP units require an 11 to 27 VAC/DC power supply. A green power LED illuminates when the unit has power. WD2-LP units provide audible alarm, red LED visual alarm, and either a SPDT or DPDT output. When conductive fluid is detected, the audible alarm and visual alarm will turn on and stay on. The relay will change state with open contacts going to closed and closed contacts going to open. Mounting: The unit is made to place on a horizontal surface where leaking fluid can build up. Mounting bracket A-154 is perfect for use in leak pans where it is desired to raise the sensing level above the bottom of the pan to eliminate nuisance alarms. The bracket can be mounted to the bottom of the pan and the height of the WD2 adjusted anywhere up to 1.75 ¿¿ (44.5 mm). Or thebracket can be used to mount the WD2 to the side of the drip pan or any side wall at a desired height. The A-154 includes one “U” bracket and two “L” brackets. For bottom mounting unscrew the body screws in the top of the WD2. Install the “L” brackets to the “U” bracket sides using the screws and nuts provided. Keep the screws loose for later adjustment of WD2 height. Place the “U” bracket on the top of the WD2 and line up the holes in the bracket with those in the body. The A-154 includes longer body screws that are used to now screw down both the bracket and the body top. The “U” bracket can be mounted in the up or down orientation but it must be mounted “down” to reach the full 1.75 ¿¿ height potential. Additional Information: Item Code: Series-WD2

Optical level Switch

Rs 13,500 / Piece

Electrical Approvals

38″ (965.2 mm) 3 conductor cable, 22 AWG wire.

Usage/Application

Food and beverage systems

Power/Voltage

10 to 28 VDC.

Model

Series-OLS

Brand

DWYER USA

Optical level Switch

The SERIES OLS Optical Level Switches are a low cost, rugged optical level switch that indicates the presence or absence of liquid via infrared light that is reflected back through the prism lens. It also provides rapid response while employing no moving parts for stable process control. The bright red and green LED’s indicate the presence or absence of liquid for true, local indication. Three optional materials, 316 SS, polysulfone and PFA provide application flexibility. Compact switch can be quickly mounted horizontally or vertically for each installation.

Principles Of Operation:
The optical level switch employs an LED, which transmits infrared light. This light is sent through a prism and reflected back to a photo-transistor utilizing two 90° light reflections. With the prism surrounded by a gas, the light source is cast back to the photo-transistor. When a translucent liquid is introduced to the prism at or above the point where the light source makes contact with the prism, the light is reflected into the liquid, not allowing the photo-transistor to energize.

Features:

Compact switch can be quickly mounted horizontally or vertically for each installation
Bright red and green LED’s indicate the presence or absence of liquid for true, local indication
Provides rapid response while employing no moving parts for stable process control
Three optional materials, 316 SS, polysulfone and PFA provide application flexibility

Specification:

Service : Noncoating compatible liquids.
Wetted Materials : See chart on Catalog page.
Temperature Limits : Process: OLS-10, 11: 200°F (93.3°C), OLS-12: 120°F (48.9°C); Ambient: OLS-10, 11: 175°F (79.4°C), OLS-12: 120°F (48.9°C).
Pressure Limit : OLS-11, 12: 200 psig (13.8 bar); OLS-10: 1000 psig (69 bar).

Applications:

Food and beverage systems
Liquid holding tanks
Hydraulic reservoirs
Sumps
Pharmaceutical systems
Air conditioning systems

Installation:

Carefully unpack switch and remove any packing material from unit. Prism surface must be clean for proper operation.
Level Switch may be installed in any position. NOTE: Do not install near infrared light sources.
Prism surface must be at least 2″ from any reflective surfaces.
Apply thread tape or sealant to 1/2″ male NPT thread. To prevent damage to threads, avoid overtightening.
Connect (+) 10-28 VDC power to red lead; return (-) to black lead. CAUTION: Do not connect output to supply.
Inspect and clean lens at regular intervals. Level switch not recommended for use with liquids that leave deposits.

Other Details:

Model	Description
OLS-10	Optical level switch, 316 SS/Polysulfone wetted materials.
OLS-11	Optical level switch, Polysulfone wetted materials.
OLS-12	Optical level switch, PFA wetted materials.

Additional Information:

Item Code: Series-OLS

Cable Float Switch

Rs 220 / Piece

Material/Body

Plastic

Switch Type

SPST

Model

Series-CFS

Brand

DWYER USA

Cable Float Switch

Control the level of liquids in filling or draining reservoirs and tanks with the Series CFS. The mercury-free switch is designed with an inverter microswitch housed in a polypropylene cover. The unit includes a counterweight to adjust the stop and start levels of pump up/pump down
application.

Installation Instructions:
The installation is very easy by holding the cable with a small clamp in the reservoir or container. By fixing the counterweight to the cable, at a closer or farther from position float, the desired differential between the highest and lowest level can be freely adjusted. Several differentials between levels, against counterweight-to-float distance are given:

Installation of Counterweight:

Insert the cable in the counterweight, from the conical part and rotate it, thus causing the plastic ring inserted in
the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight.
Force the counterweight on the ring by rotating it, using a slight pressure.
If the counterweight position is to be changed, the counterweight should be retracted, the ring position changed and secured once again.

Other Details:

Model	Cable Length
CFS-2	6.5 ft (2 m)
CFS-10	32.8 ft (10 m)

Additional Information:

Item Code: Series-CFS

Capacitive Level Switch
Rs 14,500 / Piece
Power	12 to 240 VAC/DC. .
Pressure	365 psi (25 bar).
Model	Series-CFS .
Capacitive Level Switch The CLS2 is a capacitive technology level switch that does not have any moving parts – no jams,no wear,nothing to break, and no maintenance.State of the art sensing technology in the CLS2, using impulse RF admittance measurement combined with an active guard,provides excellent level measurement and stability while being insensitive to material buildup.This technology also provides immunity to external RF sources like walkie-talkies and cell phones as well as minimal interference with radio communication or other electronic systems. Capacitive level technology can be used for liquids,powders and bulk materials and is great for difficult applications such as slurries,coating products, and liquids and solids.The CLS2 is ideal for level indication in silos,receivers, and transporters in pneumatic conveying systems.The CLS2 can also be used for liquid interface applications to detect the level of two immiscible liquids that have different dielectric constants such as oil and water.Wetted materials of PVDF and 316 SS assure great chemical compatibility and meet food grade requirements. Features: Automatic Calibration: No need to turn calibration pots, just push the calibration button. The CLS2 even has an external magnet to activate the calibration without having to open the enclosure. Universal Power Supply: One model works from 12 to 240 VAC/DC without any jumpers or settings. Coat Guard: Unit is not affected by sticky, dusty, or clingy materials that coat or build up on the probe preventing false alarms. Failsafe Setting:Output switches can be set for Normally Open or Normally Closed condition on loss of power. Status Indication:Ultra high brightness external red LED switch status indicator,and internal indicators for power, sensor,and switch status that can be seen externally with window cap option (external LED on weatherproof model only). Time Delay:Prevent false alarms from material splashing, agitation,etc. Removable Terminals:Removable terminal block snaps in and out enabling easy wiring outside of the enclosure. No Moving Parts:Permitting for no jams, no wear, nothing to break, and no maintenance. Impulse RF:Admittance measurement combined with an active guard,provides excellent level measurement and stability while being insensitive to material buildup. Immune To: External RF sources like walkie-talkies and cell phones as well as minimal interference with radio communication or other electronic systems. Can Be Used For:Liquid interface applications to detect the level of two immiscible liquids that have different dielectric constants such as oil and water. Wetted Materials:PVDF and 316 SS assure great chemical compatibility and meet food grade requirements. Specification: Temperature Limits: Ambient: -40 to 185°F (-40 to 85°C), -4 to 185°F (-20 to 85°C) with under 24 VAC/DC power supply, Process: -40 to 250°F (-40 to 121°C). Electrical Rating : 8 A @ 120/240 VAC res., 30 VDC. 1/2 hp @ 120 VAC and 1/4 hp @ 240 VAC ind. lectric Connections : 1/2″ NPT conduit opening, screw termination and removable terminal block. Mounting Orientation : Vertical or horizontal. Set Point Adjustment : Trips when product touches probe. Cut or extend probe to length of desired trip point. Can be cut as short a 1″ and can be extended by welding on to probe. (Minimum length will be effected by material being sensed.) Spark/Static Protection :10 MEG Ohm dissipation resistance with spark gap. Surge current to 100A max. Sensitivity :8 selectable settings,1,2,4,6,8,10,14,20 pF (at 30 pF nominal free capacitance). Additional Information: Item Code: Series-CLS2

Elementor #1943

Kimo Make Differential Pressure Transmitter TM110
Rs 25,000 / Piece
Brand	KIMO.
Model Number/Name	TM110 .
Kimo Make Differential Pressure Transmitter TM110 Temperature transmitter type TM110. • Range from 0 to 50 °C (ambient model), from -20 to +80 °C (duct model) and from -100 to 400 °C (model with Pt100 or NTC terminal block) • 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) • ABS V0 housing, IP65 (remote and duct models) or IP20 (ambient model), with or without display • “¼ turn” system mounting with wall-mount plate • Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI Production Capacity: 8368801023

Kimo Make Differential Pressure Transmitter CO110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CO110 .
Kimo Make Differential Pressure Transmitter CO110 CO110 CO transmitter type CO110. Range from 0 to 500 ppm 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65 (depending on model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CO112
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CO112 .
Kimo Make Differential Pressure Transmitter CO112 CO2 transmitter type CO112. Range from 0 to 5000 ppm 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65 (depending on model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHi

Kimo Make Differential pressure transmitter type
Brand	Kimo Make .
Kimo Make Differential pressure transmitter type CP111, CP112, CP113 CO2 transmitter type CO112. Ranges from -100/+100 Pa to -10000/+10000 Pa (according to models) Configurable intermediary ranges 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) • ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Solenoid valve for auto-calibration (only on CP111 model) Differential Pressure Transmitter Type CP111, CP112, CP113 Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential PressureTransmitter TypeCP114, CP115
Kimo Make Differential Pressure Transmitter Type CP114, CP115 CO2 transmitter type CO112. Ranges from -500/+500 mbar to -2000/+2000 mbar (according to models) Configurable intermediary ranges 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Kimo Make Differential PressureTransmitter TypeCP114, CP115

Kimo Make Differential Pressure Transmitter Type
CP114, CP115

CO2 transmitter type CO112.

- Ranges from -500/+500 mbar to -2000/+2000 mbar
  (according to models)
- Configurable intermediary ranges
- 0-10 V or 4-20 mA output, active, power supply
  24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive
  loop, power supply from 16 to 30 Vdc (2 wires)
- ABS V0 housing, IP65, with or without display
- “¼ turn” system mounting with wall-mount plate
- Housing with simplified mounting system

Additional Information:

- Pay Mode Terms: T/T (Bank Transfer)

Kimo Make Differential Pressure Transmitter CP116
Brand	Kimo Make .
Kimo Make Differential Pressure Transmitter CP116 CP116 Atmospheric pressure transmitter type CP116 Measuring range from 800 to 1100 hPa Indication of the pressure in mbar, mmHG ou hPa 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Solenoid valve for auto-calibration (only on CP111 model) Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CTV110
Brand	Kimo .
Kimo Make Differential Pressure Transmitter CTV110 Temperature and air velocity transmitter type CTV110. Measuring range from 0 to 30 m/s and from 0 to 50 °C 0-10 V or 4-20 mA output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, IP65, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Alternating display of air velocity and temperature Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter TH110
Brand	Kimo .
Kimo Make Differential Pressure Transmitter TH110 Humidity and temperature transmitter type TH100. Measuring range from 5 to 95%RH and from 0 to 50 °C (ambient model) or from -20 to +80 °C (duct or remote model) 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing IP65 (duct or remote model) or IP20 (ambient model), with or without display Alternating display of humidity and temperature. Housing with simplified mounting system “¼ turn” system mounting with wall-mount plate Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter HM110
Brand	KIMO .
Model Number/Name	HM110 .
Kimo Make Differential Pressure Transmitter HM110 HM110 Humidity transmitter type HM110. Measuring range from 5 to 95%RH 0-10 V output, active, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing IP65 (duct or remote model) or IP20 (ambient model), with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter CR110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	CR110 .
Kimo Make Differential Pressure Transmitter CR110 Solar radiation transmitter type CR110. Range from 0 to 1500 W/m² 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Kimo Make Differential Pressure Transmitter LR110
Rs 25,000 / Piece
Brand	KIMO .
Model Number/Name	LR110 .
Kimo Make Differential Pressure Transmitter LR110 Light transmitter type LR110. Range from 0 to 10000 lux 0-10 V active output, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply from 16 to 30 Vdc (2 wires) ABS V0 housing, with or without display “¼ turn” system mounting with wall-mount plate Housing with simplified mounting system Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

Elementor #1923

RHP-2D10 DWYER Humidity Temperature Transmitters
Rs 12,500 / Piece
Model Name/Number	RHP-2D10 .
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Item	RHP-2D10 DWYER Humidity Temperature Transmitter .
Usage/Application	Pharma .
Warranty	YAS .
Temperature Range	No .
Size	4 in x 4.4 in x 11.75 in .
RHP-2D10 DWYER Humidity Temperature Transmitter Overview Dwyer Instruments Humidity Sensors, RHP Series Item# RHP-2D10 – Duct Mount Humid- Ity Transmitter Wtih 2% Sensor And 4-20 Ma Output RHP Series Information The Series RHP Temperature and Humidity Transmitter Combine the Voltage or Current Humidity Transmitter output with a passive Temperature Thermistor or RTD output. Featuring Polymer Capacitance Humidity Sensors, Models are available in 2%, 3% or 5% accuracies. Duct mounted Transmitters are available with an optional two-line alpha numeric LCD Display. Product Applications Air Economizers Outdoor Temperature and Relative Humidity Reference Pool Room Humidity Monitoring Specifications Item Number: RHP-2D10 Brand:Dwyer Instruments Item Category:HVAC Sensors Subcategory:Humidity Sensors Series:RHP Application:Duct Input:10~35 VDC Output:4~20 mA Display:None Humidity Range:0 to 100% RH Temperature Sensor:No Approvals:CE H x W x D:4 in x 4.4 in x 11.75 in Net Weight:8.24 oz Gross Weight:1 lb Additional Information: Packaging Details: EXTRA

Relative Humidity And Temperature Transmitter
Rs 16,500 / Piece
Warranty	YAS .
Brand	DWYER USA .
Model Number	SERIES 657 .
Pressure	1 psi (.07 bar). .
Power Supply	10-35 VDC. .
Electrical Connection	4 screw type terminal. .
Condition	New .
Weight	5.5 oz (156 g). .
Relative Humidity And Temperature Transmitter The SERIES 657 Transmitters provide two 4 to 20 mA channels to produce separate output signals for both relative humidity and temperature. These devices deliver ±2% accuracy for humidity and ±1°F for temperature measurements. Stainless steel probe can be easily mounted to most ductwork using either of the two optional kits below. Features: Polymer film humidity and thin film RTD temperature sensors offer highly reliable and stable measurements Remote mount housing offers installation flexibility (657-1) Rugged die-cast aluminum housing is great for industrial applications (657C-1) Specification: Service : Dry clean air. Range : Relative Humidity: 0-100%; Temperature: 32 to 212°F (0 to 100°C). Accuracy : Relative Humidity: ±2% (10-90% RH), ±3% (0-10% and 90-100% RH); Temperature: ±1°F (0.5°C). Applications: Cleanroom monitoring HVAC/building control monitoring Additional Information: Item Code: Model-657-1

Outside Air Humidity Radiation Shield

Rs 12,500 / Piece

Condition

New

Model Number

Series-RHRS

Brand

DWYER USA

Outside Air Humidity Radiation Shield

The SERIES RHRS Radiation Shield protects outside air humidity transmitters from rain and radiated heat. With the curved shape and color of the plates, air flow is able to move across the sensor to keep radiated temperatures from rooftops and surrounding surfaces from affecting humidity readings. For ease of installation, the Series RHRS has integral pipe mounting hardware which can be removed for surface mounting applications. The brackets on the Series RHRS are specifically designed to be installed on the Dwyer Series RHP outside air humidity transmitters with sintered filters.

Features:

Adjustable sensor mounting collar works with Dwyer RHP sintered filter outdoor air humidity transmitters or other RH devices

Installation:

Loosen plastic probe retainer on radiation shield by unscrewing two retainer screws.
Slide humidity transmitter probe completely into radiation shield.
Screw plastic probe retainer to the radiation shield until the probe is firmly held in place. Do not over tighten the screws.

For Pipe Mounting:

Remove the u-bolt from the mounting bracket.

For Surface Mounting:

Remove the u-bolt and the screw holding the pipe retaining bracket.
Mark the outer two holes of the mounting bracket on the surface.
Drill the two holes marked in the previous step into the surface.
Attach the radiation shield to the surface.

Applications:

Building outside air reference
Weather stations

Additional Information:

- Item Code: Series-RHRS

Other Details:

Model	Description
RHRS	6 plate solar radiation shield for sintered filter version RH transmitters.
RHRS-10	10 plate radiation shield for humidity transmitters

Dew Point Transmitter
Rs 6,500 / Piece
Application	Industrial .
Weight	0.3 lb (0.14 kg). .
Brand	Dwyer Usa .
Wall Mount Humidity / Temperature / Dew Point TransmitterWall Mount Humidity / Temperature / Dew Point Transmitter The Series RHP-W Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. An optional LCD display can be integral to the transmitter or a remote display can be ordered for building balancing or LEED® validation. The LCD display indicates the ambient temperature along with the humidity or dew point. The transmitter has internal dip switches to select the temperature engineering units and whether the transmitter outputs humidity or dew point. The humidity and temperature sensors are field replaceable to reduce service cost and inventory. The humidity and the dew point are measured using a capacitive polymer sensor that completely recovers from 100% saturation. The humidity and dew point can have either a current or voltage output, while the optional temperature output can be a current, voltage, RTD or thermistor. For models with current or voltage for the temperature output, the temperature range is field selectable. Specification: Temperature Range : -40 to 140°F (-40 to 60°C) for thermistor and RTD sensors. -20 to 140°F (-28.9 to 60°C) for solid state band gap temperature sensors. Dew Point Temperature Range : -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C) field selectable ranges. Accuracy : >RH: Model RHP-2XXX ±2% 10-90% RH @ 25°C, Model RHP-3XXX ±3% 20-80% RH @ 25°C, Thermistor temperature sensor: ±0.36°F @ 77°F (±0.2°C @ 25°C), RTD Temperature sensor: DIN Class B; ±0.54°F @ 32°F (±0.3°C @ 0°C), Solid state band gap temperature sensor: ±0.9°F @ 77°F (±0.3°C @ 25°C). Temperature Limits : Operating: -40 to 140°F (-40 to 60°C); Storage: -40 to 176°F (-40 to 80°C). 4-20 mA Loop Powered Output: >Power Requirements: 10-35 VDC. Output Signal: 4-20 mA, 2 channels for humidity/solid state temperature sensor models (loop powered on RH). Switch selectable RH/dew point. Switch selectable normal or reverse output. 0-5/10V Outputs: >Power Requirements: 15-35 VDC or 15-29 VAC. Output Load: 5 mA max., 2 channels for humidity/solid state temperature sensor models. Switch selectable 0-10V/2-10V or 0-5V/1-5V output. Switch selectable RH/dew point. Switch selectable normal or reverse output. Solid State Band Gap Temp Sensor Output Ranges : Switch selectable, -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to 37.8°C); 40 to 90°F (4.4 to 32.3°C); -4 to 140°F (-20 to 60°C). Electrical Connections: Screw terminal block. Drift : <1% RH/year. RH Sensor : Capacitance polymer. Enclosure Material : Warm gray polycarbonate. Display : Optional LCD, backlit on 0-5/10V models. Switch selectable %RH or dew point, °F/°C. Display Resolution : RH: 1%; Temperature: 0.1°F (0.1°C); Dew Point: 1°F (1°C). Additional Information: Item Code: Series-RHP-W

Carbon Dioxide Transmitter

Rs 12,500 / Piece

Model Name/Number

Series-CDWP Yes

Brand

DWYER USA

Measurement Range

CO2 0 to 2000,0 to 5000,or 0 to 10000 ppm (depending on model).

Weight

26.24 oz (744 g).

Accuracy

CO2 +/-40 ppm +/-3% of reading.
.

Place Of Origin

DELHI

Condition

New

Carbon Dioxide Transmitter

The SERIES CDWP Carbon Dioxide Transmitters accurately monitor the CO2 concentration in industrial, agricultural, and indoor environments to help achieve energy savings. The IP54 die cast aluminum housing was designed for harsh environments making it ideal for animal husbandry and HVAC mechanical rooms. For increased sensor life and accuracy, a single-beam dual-wavelength non-dispersive infrared (NDIR) sensor is used to eliminate light source aging affects. This sensing technology provides the highest level of accuracy compared to Automatic Baseline Correction methods, which can unintentionally shift the calibration based on CO2 levels and barometric pressure conditions.

Features:

IP54 aluminum housing
Gray finish designed to withstand 168 hour salt spray test
Single-beam dual-wavelength sensor automatically corrects for aging effects
Measures unfiltered light intensity directly and eliminated error from incorrect assumptions of gas concentration in theoretical logic assumption methods
Universal outputs to work with any building management

Specification:

Sensor : Single beam, dual-wavelength NDIR.
Power Consumption : Average: 2 w; Peak: 3.75 w.
Output : Current: 4 to 20 mA (max. 500 Ω); Voltage: 0 to 5 VDC or 0 to 10 VDC (min. 500 Ω).
Mounting Orientation : Vertically, with electrical connections points downward.

Applications:

Animal Husbandry
Mechanical Room
CO2 Refrigeration Monitoring
Greenhouses

Power Supply:
Choose a power supply with a voltage and current rating sufficient to meet the power specifications under all operating conditions. If the power supply is unregulated, make sure the output voltage remains within the required voltage range under all power line conditions

Maintenance/Repair:
Upon final installation of the Series CDWP, no routine maintenance is required. The Series CDWP is not field serviceable and it is not possible to repair the unit. Field repair should not be attempted and may void warranty.

Warranty/Return:
Refer to “Terms and Conditions of Sale” in our catalog and on our website. Contact customer service to receive a Return Goods Authorization number before shipping the product back for repair. Be sure to include a brief description of the problem plus any additional application notes.

Other Details:

Model	Description
CDWP-05H-C1	Industrial CO2 Transmitter, 0-5000 PPM range, hang mount, with 1-6 mm cable gland
CDWP-05H-C5	Industrial CO2 Transmitter, 0-5000 PPM range, hang mount, with 5-10 mm cable gland
CDWP-05W-C1	Industrial CO2 Transmitter, 0-5000 PPM range, wall mount, with 1-6 mm cable gland
CDWP-05W-C5	Industrial CO2 Transmitter, 0-5000 PPM range, wall mount, with 5-10 mm cable gland
CDWP-10H-C1	Industrial CO2 Transmitter, 0-10,000 PPM range, hang mount, with 1-6 mm cable gland
CDWP-10H-C5	Industrial CO2 Transmitter, 0-10,000 PPM range, hang mount, with 5-10 mm cable gland
CDWP-10W-C1	Industrial CO2 Transmitter, 0-10,000 PPM range, wall mount, with 1-6 mm cable gland
CDWP-10W-C5	Industrial CO2 Transmitter, 0-10,000 PPM range, wall mount, with 5-10 mm cable gland

Additional Information:

- Packaging Details: EXTRA

Compact USB Data Logger with Display

Rs 12,000 / Piece

Model Name/Number

Series-DW-USB-LCD

Brand

Aerosense,Galaxy,Omicron,Sensocon,Dwyer

Power Supply

3.6 V 1/2 AA lithium metal battery, included, user replaceable.

Display

2.5 digit LCD

Usage

Industrial
.

Temperature Range

1 Degree F (0.5 Degree C)

Compact USB Data Logger with Display

The SERIES DW-USB Compact USB Data Logger allows users to monitor temperature, humidity, dew point, voltage, current, or carbon monoxide almost anywhere, and then download stored data by simply plugging the module directly into a PC’s USB port. The compact housing can resist moisture up to IP67 when the protective cap is attached, and has built in LED’s to indicate an alarm has been met or the battery is low. Using the included Windows® based software, users can set the sampling rate, start time, high/low alarms, and temperature unit.

Specification:

Range:DW-USB-2-LCD: Temperature: -31 to 176° F (-35 to 80°C), Humidity: 0 to 100% RH; DW-USB-2-HA-LCD: Temperature: -31 to 176° F (-35 to 80°C), Humidity: 0 to 100% RH; DW-USB-6-LCD: K-type: -328 to 2372°F (-200 to 1300°C), J-type: -202 to 1652°F (-130 to 900°C), T-type: -328 to 662°F (-200 to 350°C).
Accuracy:DW-USB-2-LCD: Temperature ±1°F (±0.5°C) Humidity ±3.0%; DW-USB-2-HA-LCD: Temperature ±0.6°F (±0.3°C), Humidity ±2.0%; DW-USB-6-LCD: ±2°F (±1°C).
Memory Size : Thermocouple models: 32510 readings; Temperature/humidity models: 16382 readings.
Sampling Mode : Continuous with data rollover.
Sampling Rate : Selectable from 10 seconds to 12 hours for temperature/humidity models; 1 second to 12 hours for thermocouple models.
Computer Requirements : Windows® 2000, Windows® XP, Windows® 7, Windows VISTA® 32-bit or 64-bit operating systems.
Alarms : Programmable high/low.
Weight : Temperature/humidity models 1.6 oz (45.4 g); Thermocouple models 1.8 oz (51 g).

Button Operation:
The button performs two functions:

To start the logger when in push to start mode.
To enable the display and cycle through the available display modes (see diagram below).

Battery Installation:
Before using the data logger, you will need to insert the 3.6 V 1/2 AA battery provided, following the instructions below.

Use screwdriver to gently depress tab of the battery compartment.
Pull battery cover towards you, away from the unit.
Install the battery, taking note of polarities.
Replace battery cover. Cover is secure when tab returns to original position

Maintenance:
Upon final installation of the Compact DW-USB-LCD Data Logger, no routine maintenance is required. Leaving the logger plugged into your computer for an extended period of time will considerably lower its battery life. A periodic check of system calibration is recommended. The Series DW-USB-LCD is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Other Details:

Model	Description
DW-USB-1-LCD	Compact USB data logger, temperature with LCD.
DW-USB-2-HA-LCD	Compact USB data logger, high accuracy temperature/humidity/dew point input, with LCD.
DW-USB-2-LCD	Compact USB data logger, temperature/humidity/dew point input, with LCD.
DW-USB-6-LCD	Compact USB data logger, thermocouple input, with LCD.

Request
Callback

Additional Information:

Item Code: Series-DW-USB-LCD

Graphical Display Data Logger
Rs 12,000 / Piece
Model Name/Number	Model-GDL .
Brand	Dwyer Usa .
Accuracy	+/-2% RH, from 10 to 90% RH. .
Usage/Application	Industrial .
Warranty	YAS .
Memory	43344 temperature; 21672 temperature, RH and dew point..
Weight	7 oz (20 g). .
Graphical Display Data Logger The Model GDL Graphical Display Data Logger can record and instantly display temperature, humidity, and dew point trends in a text or graphic format. The GDL has internal temperature and humidity sensors. With the included Windows® based software, the user can select the sampling interval, high/low alarms, logging channels, and recording start time. Over 40,000 data points can be recorded and the measured data stays secure with a recording session counter and password-protected calibration. Features: Measurements displayed in text or graph Able to record over 40,000 data points and download them to a PC Includes logging summary with details of the sample rate and memory status Specification: Sampling Method : Stop on memory full or continuous recording. Sampling Rate : Second to 18 hours, 1 second increments. Computer Requirements : Windows® 98 and above (software included). Power Requirements : (3) AA alkaline batteries, installed functional, user replaceable. Alarms : Programmable high/low. Interface : USB port (cable included). Applications: Greenhouses/florists Medical storage facilities Refrigeration systems Additional Information: Item Code: Model-GDL

Humidity Switch

Rs 2,500/ Piece

Model Name/Number

Series-HS

Brand

Dwyer Usa

Accuracy

THC-P +/-5% @ 20 to 90%; HS +/-1% RH.

Humidity

10 to 100% RH.

Power Supply

115 VAC or 230 VAC
.

Humidity

10 to 100% RH.

Display

3-digit, green, 1/2″ (12.7 mm) digits.

Humidity Switch

The SERIES HS Humidity Switch provides control for humidifying or dehumidifying systems. Relative humidity, output status, and error messaging can be viewed on the bright green LED. Access to programming parameters can be locked for security purposes using the password protection feature.

Features:

Relative humidity display and control
Parameter protection

Applications:

Industrial Chillers
Environmental Chambers
Walk-ins and Freezers
Heat Sealers
Mug Frosters
Coolers
Display Cases and Cabinets
Meat and Produce Storage
Floral Preservation
Refrigerated Transportation
Laboratories
Food Service Equipment
Ovens and Dryers
Greenhouses
Museums
Monitor Humidity in Ducts

Installation:

Cut hole in panel 2.80 x 1.14 inches (71 x 29 mm).
Apply silicone (or rubber gasket) around the perimeter of the hole to prevent leakage.
Insert unit into hole of panel.
Slide removable fitting clips onto unit from the back until secure to panel.
Remove back cover to wire unit.
Wiring diagram is displayed on the top of the unit

Maintenance/Repair:
Upon final installation of the Series HS Humidity Switch, no routine maintenance is required. A periodic check of system calibration is recommended. The devices are not field repairable and should be returned to the factory if recalibration or other services is required. After fir obtaining a Returned Goods Authorization (RGA) number, end the material, freight prepaid, to the following address. Please include a clear description of the problem plus any application information available.

Other Details:

Model	Description
HS-111	Humidity switch, 0-1 V input sensor, 110 VAC supply voltage.
HS-112	Humidity switch, 0-1 V input sensor, 230 VAC supply voltage.
HS-311	Humidity switch, 0-3 V input sensor, 110 VAC supply voltage.
HS-312	Humidity switch, 0-3 V input sensor, 230 VAC supply voltage.
HS-411	Humidity switch, 4-20 mA input sensor, 110 VAC supply voltage.
HS-412	Humidity switch, 4-20 mA input sensor, 230 VAC supply voltage.

Additional Information:

Item Code: Series-HS

Humidity and Temperature Transmitter

Rs 16,500 / Piece

Response Time

Less than 15 S

Brand

Dwyer Usa

Power

10 to 35 VDC.

Condition

New

Warranty

YAS
.

Relative Humidity Range

0 to 100% RH.

Humidity and Temperature Transmitter

The SERIES RH-R Humidity Transmitter is the ideal transmitter for those applications where space is limited. The compact sensor is protected by a removable filter. It can be mounted up to 16 feet away from the weatherproof base. The Series RH-R is ideal for environmental chambers, rubber bladder burst detection and air handler applications.

Features:

Remote housing allows for flexibility sensing where space may be limited

Applications:

Process system monitoring
Environmental chambers
Air economizers

Installation:
Make sure all connections are in accordance with the job wiring diagram and in accordance with national and local electrical codes. Use copper conductors only.Do not make changes to the cable lengths. Sensors are factory calibrated for supplied length of cable. Optional lengths are available from the factory.

Caution:
Use electrostatic discharge precautions (e.g., use of wrist straps) during installation and wiring to prevent equipment damage.
Avoid locations where severe shock or vibration, excessive moisture or corrosive fumes are present. NEMA Type 4X (IP65) housings are intended for outdoor use primarily to provide a degree of protection against wind-blown dust, rain, and hose directed water.
Do not exceed ratings of this device, permanent damage not covered by warranty may result. The 4 to 20 mA models are not designed for AC voltage operation.

OSA (Outside Air):

The transmitter should be mounted under an eave, shield, or in an area that is out of
the elements or direct sunlight.
Remove the cover plugs from the face of the unit and the top cover.
Position the transmitter where it is to be mounted and mark the mounting holes in each corner of the housing.
Drill or punch out marked locations.
Place the transmitter box over mounting holes on wall and align. Install wall mount screws (not provided) in mounting holes.
Proceed with wiring according to Figure 2.
Replace cover and cover plugs on the face of the unit.

Maintenance:
Upon final installation of the Series RH-R Temperature/Humidity Transmitter and the companion receiver, no routine maintenance is required. A periodic check of the system calibration is recommended. The Series RH-R is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization
number before shipping.

Other Details:

Model	Description
RHT-R008	Humidity/Temperature Transmitter, 8′ cable, current output.
RHT-R016	Humidity/Temperature Transmitter, 16′ cable, current output.
RHT-R108	Humidity/Temperature Transmitter, 8′ cable, voltage output.
RHT-R116	Humidity/Temperature Transmitter, 16′ cable, voltage output.
RHU-R008	Humidity Transmitter, 8′ cable, current output.
RHU-R016	Humidity Transmitter, 16′ cable, current output

Additional Information:

Item Code: Series-RH-R

Temperature and Humidity Switch

Rs 9,500 / Piece

Model Name/Number

Series-THC

Brand

Dwyer Usa

Horsepower Rating

1/3 HP.

Ambient Operating Temperature

32 to 158 Degree F (0 to 70 Degree C).
.

Storage Temperature

-4 to 176 Degree F (-20 to 80 Degree C).

Power

110 or 230 VAC (depending on model).

Display Configuration

Two 3-digit displays. 1/2″ digits..

Panel Cutout

5.15″ x 3.97″ (131 x 101 mm).

Weight

1.17 lb (530 g)

Temperature and Humidity Switch

The SERIES THC simultaneously measures and controls temperature and humidity. The unit offers a 3-digit red display for temperature indication and a 3-digit green display indicating humidity. The Series THC is equipped with four independent relays, two for temperature control and two relays for humidity control. The THC Temperature/Humidity Switch accepts up to two temperature probe inputs (sold separately) and a humidity sensor.

Features:

Temperature and humidity control in one device
Password protected parameter settings
Selectable fail safe status of relay outputs

Specification:

Measurement Range : Temperature: -58 to 302°F (-50 to 150°C); Humidity: 10 to 100% RH.
Input : Up to 2 thermistors and 1 humidity sensor.
Output : 4 SPST, 8 A relays @ 250 VAC.
Control Type : On/Off direction, direct or reverse acting, neutral.
Accuracy : Temperature: ±0.5% of probe range; Humidity: ±3% (20 to 90%) of range.

Applications:

Isolation chambers
Environmental chambers
Greenhouses

Other Details:

Model	Description
THC-10	Temperature/humidity switch, °F, 110 VAC.
THC-11	Temperature/humidity switch, °C, 110 VAC.
THC-20	Temperature/humidity switch, °F, 230 VAC.
THC-21	Temperature/humidity switch, °C, 230 VAC.

Additional Information:

Item Code: Series-THC

Button Data Logger

Rs 2,100 / Piece

Model Name/Number

Series-BDL

Brand

Dwyer Usa

Usage/Application

Industrial

Warranty

YAS
.

Battery Life

BDL-1 10 yrs. (approx), BDL-2 5 yrs. (approx).

Graphical Display Data Logger

The Model GDL Graphical Display Data Logger can record and instantly display temperature, humidity, and dew point trends in a text or graphic format. The GDL has internal temperature and humidity sensors. With the included Windows® based software, the user can select the sampling interval, high/low alarms, logging channels, and recording start time. Over 40,000 data points can be recorded and the measured data stays secure with a recording session counter and password-protected calibration.

Button Data Logger

The Series BDL Button Data Logger records temperature and humidity in applications where size and cost effectiveness are vital. Housed in a compact stainless steel case, the BDL is durable in hostile environments, while also being able to be inserted in small items and packages. The Series BDL-K Logger Kit includes 2 buttons, 2 magnets, an interface cable, and a plastic button holder.

Features:

Compact to fit in small areas and durable to work in hostile environments
Self-powered unit gives no need for external power supply
Magnetic mounting for quicker installation

Specification:

Range : BLD-1: -40 to 185°F (-40 to 85°C); BDL-2: -4 to 185°F (-20 to 85°C); 0 to 100% RH.
Memory Size : BDL-1: 2048 readings; BDL-2: 4096 temperature and 4096 humidity readings (low resolution), 2048 temperature and 2048 humidity readings (high resolution).
Accuracy : BDL-1: ±1.5°F (±1°C) from -22 to 158°F (-30 to 70°C); BDL-2: ±0.9°F (±0.5°C) from 14 to 158°F (-10 to 70°C), ±5% RH.
Sampling Method : Stop on memory full or continuous recording.
Sampling Rate : BDL-1: Selectable from 1 to 255 m.; BDL-2: Selectable from 1 s. to 24 hrs.
Computer Requirements : Windows® 98, Windows® 2000, Windows® ME, Windows NT®, Windows® XP, and Windows Vista® operating system with 16 MB RAM, one free USB port.
Alarms : Programmable high/low.

Applications:

Food processing verification
Pharmaceutical storage
Transportation of temperature sensitive goods
HVAC system testing and balancing

Software Installation:

Ensure that no applications are running.
Insert the installation CD and select the install option from the menu.
Follow the onscreen instructions.
Restart the computer. A new icon will be placed on the desktop.
After installing the software, connect the logger.
The first time you open the software, you will be prompted to enter a password. The password will only be used if you decide to use the security functions. Enter and take note of the password.

Software Features:

Graphing of downloaded data
Zooming function
Temperature in °F or °C
Up to two traces per graph
Multiple traces per graph (Full Version Only)
Exporting to spreadsheet (Full Version Only)
Viewing the data table (Full Version Only)
Calculating Mean Kinetic Temperature (MKT) (Full Version Only)
Emailing graphs (Full Version Only)

Maintenance:

Upon final installation of the Series BDL Button Data Logger, no routine maintenance is required.
Fast logging will considerably shorten the battery life. To preserve battery life, it is recommended to use the longest practical sampling rate, and when the logger is not in use, to set the sampling rate to the longest option.
A periodic check of system calibration is recommended. The Series BDL is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.

Other Details:

Model	Description
BDL-K1	Temperature button data logger kit with (2) BDL-1, (1) USB interface, and (1) clip.
BDL-K2	Temperature and humidity button data logger kit with (2) BDL-2, (1) USB interface, and (1) clip.

Additional Information:

Item Code: Series-BDL

Weather Resistant Humidity and Temperature Transmitter

Rs 15,000 / Piece

Temperature Range

-40 to 140 Degree F (-40 to 60 Degree C).

Brand

Dwyer Usa

Storage Temperature

-40 to 176 Degree F (-40 to 80 Degree C)..

Condition

New

Warranty

YAS
.

Weather Resistant Humidity and Temperature Transmitter

The compact SERIES WHT Humidity/Temperature Transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 mA or 0 to 10 VDC output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications.

Features:

RH or RH and temperature outputs
Compact NEMA 3S construction

Specification:

Accuracy, RH : ±3% 20 to 80% RH, ±4% @ 10 to 20%, 80 to 90%.
Accuracy, Temp Models with 4 to 20 mA Temp. Output : ±0.9°F @ 72°F (±0.3°C @ 25°C).
Accuracy, Temp Models with Passive Thermistor Temp Sensor : ±0.4°F @ 77°F (±0.22°C @ 25°C).
Compensated Temperature Range, RH : -4 to 140°F (-20 to 60°C).
4-20 mA Loop Powered Models : Power Requirements: 10 to 35 VDC; Output Signal: 4 to 20 mA.
0 to 10 V Output Models : Power Requirements: 15 to 35 VDC or 15 to 29 VAC; Output Signal: 0 to 10 V @ 5 mA max.
0 to 5 V Output Models : Power Requirements: 10 to 35 VDC or 10 to 29 VAC; Output Signal: 0 to 5 V @ 5 mA max.
Electrical Connections : Removable screw terminal block.
Drift : <1% RH/year.
RH Sensor : Capacitance polymer.
Temperature Sensor: 4 to 20 mA output, solid state band gap. Passive output: 10K @ 25°C thermistor (Dwyer curve A).

Installation:
Caution:
Use electrostatic discharge precautions during installation and wiring to prevent equipment damage.
Avoid locations where severe shock or vibration, excessive moisture or corrosive fumes are present. NEMA Type 3S (IP54) housings are intended for outdoor use primarily to provide a degree of protection against wind-blown dust, and rain. The 4-20 mA models are not designed for AC voltage operation.

Mounting:
The transmitter should be mounted with the sensor pointing downward to prevent water collection in the housing. The integral mounting tab has two sets of mounting holes. The larger holes are for the suspension mounting and the smaller holes are for surface mounting the transmitter to a wall. Please see Figure 1 and 2 for more information on both mounting method

Other Details:

Model	Description
WHT-310	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output.
WHT-311	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity and temperature output.
WHT-31A	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 4-20 mA humidity output and 10K Ω Type III, curve A temperature output.
WHT-320	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output.
WHT-322	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity and temperature output.
WHT-32A	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-10 VDC humidity output and 10K Ω Type III, curve A temperature output.
WHT-330	Water-resistant humidity transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity output.
WHT-333	Water-resistant humidity/temperature transmitter with sintered filter, 3% accuracy, 0-5 VDC humidity and temperature output.

Additional Information:

Item Code: Series-WHT

Hazardous Area Humidity and Temperature Transmitter

Rs 16,250 / Piece

Temperature Range

-40 to 140 Degree F (-40 to 60 Degree C).

Brand

Dwyer Usa

Condition

New

Response Time

Hazardous Area Humidity and Temperature Transmitter

The SERIES HHT Hazardous Area Humidity/Temperature Transmitter takes accurate measurements in the harshest of environments. The explosion-proof model is offered with 4 to 20 mA output for humidity only. The intrinsically safe version is offered with 4 to 20 mA output for humidity and temperature, and do require an intrinsically safe barrier to meet hazardous area approvals. It is important to develop a routine schedule for replacing the RH/temperature sensor (part number A-451). The sensor should be replaced annually or sooner depending on application conditions.

Features:

FM approved explosion-proof and intrinsically safe models
Integral LCD option
Replaceable calibrated sensor for long term use in harsh environments
Dual temperature and relative humidity output models

Specification:

Service : Dry clean air.
Accuracy : ±2% 10 to 90% RH, ±0.9°F at 72°F (±0.3°C at 25°C).
Power Requirements : For instrinsically safe models HHT-IX, 9.5 to 28 VDC. For explosion-proof models HHT-EX, 16.5 to 28 VDC.
Output Signal : 4 to 20 mA, 2 channels for humidity/temperature models (loop power on RH).
Electrical Connections : Screw terminal block.
Drift : <1% RH/year.
RH Sensor : Capacitance polymer.
Temperature Sensor : Solid state band gap.
Housing Material : Aluminum.
Display : Optional 2 line alpha numeric, 8 characters/line. Temperature display is °F/°C selectable.
Display Resolution : RH: 0.1%; Temperature: 0.1°F (0.1°C).
Enclosure Rating : NEMA 4X (IP66). Models HHT-EX: FM Explosion-proof, Class I Div. 1 Group B, C, D, Class II Div. 1 Group E, F, G, Class III Div. 1; Models HHT-IX: FM Instrinsically Safe, Class I Div. 1 Group A, B, C, D, Class II Div. 1 Group E, F, G, Class III Div. 1 T4.

Applications:

Process monitoring
Offshore HVAC monitoring
Dust and grain handling

Other Details:

Model	Description
HHT-EU	Explosion-proof humidity transmitter.
HHT-EU-LCD	Explosion-proof humidity transmitter with LCD display.
HHT-IT	Intrinsically safe humidity/temperature transmitter.
HHT-IT-LCD	Intrinsically safe humidity/temperature transmitter with LCD display.
HHT-IU	Intrinsically safe humidity transmitter.

Additional Information:

Item Code: Series-HHT

Elementor #1907

Low Cost Galaxy Differential Pressure Gauge
Rs 1,976 / Piece
Brand	Sensocon USA .
Low Cost Galaxy Differential Pressure Gauge We are leading supplier and trader of Low Cost Galaxy Differential Pressure Gauge. Kindly find below product details of Low Cost Galaxy Differential Pressure Gauge. Product Details:: Pressure Range Model Number Pressure Range Pa / kPa 0 – 0.25” S2000-60PA 0 – 60 0 – 0.5” S2000-125PA 0 – 125 0 – 1” S2000-250PA 0 – 250 0 – 2” S2000-500PA 0 – 500 0 – 3” S2000-750PA 0 – 750 0 – 4” S2000-1KPA 0 – 1 0 – 5” S2000-1.5KPA 0 – 1.5 0 – 6” S2000-2KPA 0 – 2 0 – 8” Zero Center 0 – 10” S2300-60PA 30 – 0 – 30 0 – 15” S2300-120PA 60 – 0 – 60 0 – 20” S2300-250PA 125 – 0 – 125 0 – 25” mm w.c. 0 – 30” S2000-6MM 0 – 6 0 – 50” S2000-10MM 0 – 10 0 – 100” S2000-25MM 0 – 25 Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnehelic Differential Pressure Gauges
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Galaxy Make Magnehelic Differential Pressure Gauges Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Low Cost Galaxy Differential Pressure Gauges
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Low Cost Galaxy Differential Pressure Gauges Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnehelic Gauge

Brand	Galaxy Make .
Galaxy Make Magnehelic Gauge Our specialization lies in offering a commendable range of Galaxy Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices. Features: Compact size Easy installation Accuracy Specifications : Application: Industrial Structure: Spring Pressure Gauge Connection Type: Radial Direction Function: Local Indication Type Indicating Pressure Reference: Differential Pressure Gauge Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Make Magnetic Gauge
Rs 3,500 / Piece
Brand	Integerated Engineers India .
Galaxy Make Magnetic Gauge Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Galaxy Magnehelic Gauge
Rs 3,500 / Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Galaxy Magnehelic Gauge Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Galaxy Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame. Features: Long service life High functionality Accuracy Specifications : We provide Galaxy magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2% Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others We offer Galaxy magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover Technical Specifications: Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C) Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option HP option: 35 psig (2.41 bar), 80 psig (5.52 bar) Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only Temperature Limits: 20 to 140°F.* (-6.67 to 60°C) Size: 4 (101.6 mm) Diameter dial face Mounting Orientation: Diaphragm in vertical position, Consult factory for Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back Weight: 1 lb 2 oz (510 g), MP HP 2 lb 2 oz (963 g) Other position orientations Applications Filter Status Duct Static Pressure Clean Room Pressure Building Pressure Fan and Blower Pressure Paint Booths Dust Collectors Glove Box Pressure Bubbler Systems Cabinet Purging Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Elementor #1847

Capsuhelic Differential Pressure Gauge
Rs 5,401/ Piece
Brand	Aerosense,Galaxy,Omicron,Sensocon,Dwyer .
Capsuhelic Differential Pressure Gauge Series 4000 Capsuhelic® Differential Pressure Gage Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig. The SERIES 4000 Capsuhelic® Gage is designed to give fast, accurate indication of differential pressures. The gauge may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gauge. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c. Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Product Applications: Fluid flow Liquid storage tanks Filter pressure drops Vacuum or differential pressure Specifications Service: Aluminum Case: Air and compatible gases and oil based liquids. Brass Case: Air and compatible gases and water based liquids. Wetted Materials:Consult factory. Housing: Die cast aluminum with impregnated hard coating, standard. Optional forged brass housing is required for water or water based fluids. Special material diaphragms available, contact factory. Accuracy: ±3% of FS at 70°F (21.1°C). (±2% on 4000S models, ±4% on 4200, 4210, 4215, 4220, 4300, 4400, and 4500). Pressure Limits:-20″ Hg to 500 psig. (-0.677 bar to 34.4 bar). Temperature Limits:20 to 200°F (-6.67 to 93.3°C) Size:4″ (101.6 mm) diameter dial face. Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations. Process Connections:1/4″ female NPT high and low pressure taps, duplicated – one pair top for air and gas, and one pair bottom for liquids. Weight: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case. Standard Accessories:Two 1/4″ NPT plugs for duplicate pressure taps, four flush mounting adapters with screws and four surface mounting screws. Feature:: Gage capsule permits high-pressure usage with small differentials Zero and range adjustments outside of gauge means no disassembly in normal service Time-proven, simple, frictionless movement that permits full scale readings as low as 0.5 in w.c. Diaphragm-actuated versus liquid filled gauge supports outdoor use Options ASF Adjustable Signal Flag B Brass Case Scale Overlays Red, Green, Mirrored or Combination, Specify Locations Additional Information: Pay Mode Terms: T/T (Bank Transfer)

1700 Low Differential Pressure Designed Switch
Rs 12,500 / Piece
Brand	DWYER USA .
Model	1700 .
1700 Low Differential Pressure Designed Switch Series 1700 Differential Pressure Switches were specifically designed to satisfy the demands of high volume original equipment manufacturers for a tough, dependable limit switch at a very low price. The Model 1710 uses Dwyer’s simple, time-proven method of mechanically coupling a sensitive 3″ diameter silicone rubber diaphragm to a versatile SPDT snap switch. The switch housing is precision molded of a high strength glass filled PPO which has excellent dimensional and thermal stability. This unique combination of existing and new technologies enables Dwyer to offer a limit switch priced less than comparable units without sacrificing performance. Installation is fast and simple with twist and tighten mounting screw slots, 14″ quick connect electrical terminals and dual size barbed pressure ports for 18″ and 316″ ID vinyl or rubber tubing. For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz. Product Applications High efficiency furnaces,Duct pressure monitor,Laboratory fume hoods,Monitor air filtercondition Etc Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: DELHI

EDPS Differential Pressure Switch
Rs 4,000 / Piece
Brand	DWYER USA .
Model	EDPS .
EDPS Differential Pressure Switch The Series ADPSEDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The ADPSEDPS is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. Series EDPS models meet UL508 and are constructed of plenum rated plastics. The compact size, adjustment knob and low cost make the ADPSEDPS the perfect choice for HVAC applications. For use with air and other non-combustible, non-corrosive gases, switches are UL and CSA recognized. Two models are offered with field adjustable ranges from .15 to .55″ w.c. and .50 to 7.5″ w.c. Units are rated for 2 psig maximum system pressure, temperature limit is 190 DegreeF and weight is only 4 oz. Product Applications : Monitoring industrial cooling-air circuits,Monitoring air filters and ventilators,Monitoring flows in ventilation ducts,Frost protection for heat exchanges Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer)

AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch
Rs 12,500/ Piece
Brand	DWYER USA .
Model	AT1ADPS ATEX .
AT1ADPS ATEX Approved ADPS Adjustable Differential Pressure Switch The ATEX approved Series AT1ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 16 in w.c. (4000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing set point status on adjustment knob. Important notes for installation : Cables must be fitted through 1/2″ NPT cable gland or ATEX conduit (not supplied with instrument) Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer)

BDPA Adjustable Differential Pressure Alarm
Rs 12,500/ Piece
Brand	DWYER USA .
Model	BDPA .
BDPA Adjustable Differential Pressure Alarm The Series BDPA Adjustable Differential Pressure Alarm with built-in audible and visual set point indication is designed for overpressure, vacuum, and differential pressure applications. The scaled adjustment knob allows changes to the switching pressure to be made without a pressure gage. The BDPA is available with settings from 0.08″ w.c. (20 Pa) to 20″ w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the Series BDPA perfect for use with air and other noncombustible gases. The Series BDPA Adjustable Differential Pressure Alarms offer a versatile range of configurations allowing utilization of their many features. The BDPA can be powered by battery or 24 VDCVAC line power. If connecting line power, the battery can act as back-up power in case of power outage. When set point threshold is reached, a local loud audible buzzer and bright LED will indicate periodically notifying of set point activation. An SPDT contact may also be wired to send a signal remotely to a DDC or building management system. A snooze button located through an opening in the cover can be pressed by the user to manually disengage the audible and visual indication until a maintenance operation is performed. If the instrument is mounted where it is difficult to access, a remote contact may be connected allowing the user to deactivate the buzzer and LED at the remote contact location. The Series BDPA Differential Pressure Alarm’s great functional versatility makes it perfect for filter, fan, and ventilation applications or any retrofit job where installing electrical wiring proves cost-prohibitive. Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1800 Low Differential Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	1800 .
1800 Low Differential Pressure Switch Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved. CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Note: For a 12″ npt connection, use the 12″ conduit fitting adapter (A-483). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

AT21823 ATEX Approved 1823 Differential Pressure Switch
Rs 12,500/ Piece
Brand	DWYER USA .
Model	AT21823 .
AT21823 ATEX Approved 1823 Differential Pressure Switch Essential for industrial environments, the ATEX approved Series AT21823 combines small size with 2% repeatability. Set point adjustment inside the switch allows for set point settings across 9 ranges from the low of .07 in w.c. to a maximum 85 in w.c. differential pressure. Series AT21823 flame-proof ATEX enclosures are available in aluminum and are ideal for low pressure hazardous area applications. Various housing options such as an overpressure relief valve or external setpoint adjustment knob are available. External setpoint knob allows adjustment without opening the enclosure Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1900 Compact Low Differential Pressure Switches
Rs 12,500/ Piece
Brand	DWYER USA .
Model	1900 .
1900 Compact Low Differential Pressure Switches Our most popular series combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non-combustible compatible gases, Series 1900 switches have set points from 0.07 to 20″ w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside conduit enclosure. Internal location helps prevent tampering. UL, CE and CSA listed, and FM approved. CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES. Product Applications : Clogged filter detection,Air conditioning refrigeration coil icing detection; defrost cycle intiation,Variable air volume controller Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

AT11910 ATEX Approved 1910 Differential Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	AT11910 .
AT11910 ATEX Approved 1910 Differential Pressure Switch Our most popular Differential Pressure Switch is now available in an flame-proof ATEX approved package in the AT11910 Series. This pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. For air and non-combustible compatible gases, the AT11910 Series switches have set points from 0.07 to 20 in w.c. (1.8 to 508 mm). Set point adjustment is easy with range screw located inside the switch enclosure. Series AT11910 ATEX enclosures are available in aluminum enclosures and ideal for low pressure, hazardous area applications. Important notes for installation Cables must be fitted through 12″ NPT cable gland or ATEX conduit (not supplied with instrument). Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve). Open cover only after de-energizing instrument. Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

MDA Miniature Adjustable Pressure Switch
Rs 25,000/ Piece
Brand	DWYER USA .
Model	MDA .
MDA Miniature Adjustable Pressure Switch Sense differential pressure with the Series MDA Miniature Adjustable Pressure Switch. The switch features field adjustable set point and gold inlay contacts. Air or other compatible fluids can be used on the “high side”. The lightweight and compact size make the MDA ideal for any application with space constraints. Applications include industrial, HVAC, pump and motor control, medical, automotive, pools and spas. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Mark II Molded Plastic Manometer
Rs 12,500 / Piece
Brand	DWYER USA .
Measuring Range	0-1” .
Model	Mark II .
Mark II Molded Plastic Manometer Dwyer® Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

424 Durablock Inclined Manometer
Rs 9,500 / Piece
Brand	DWYER USA .
Model	Dwyer No 424 .
424 Durablock Inclined Manometer Dwyer® No. 424 inclined-vertical manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20″ to provide ample multiplication of indicating fluid movement in this critical lower part of the range. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

1235 Flex-Tube Well Manometer
Rs 8,500/ Piece
Brand	DWYER USA .
Model	1235 .
1235 Flex-Tube Well Manometer Dwyer Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Overpressure safety traps assure protection against loss of fluid. Heavy pure white acrylic plastic scales have sharp black silk screened figures and graduations sealed with clear mylar coating. Scales are adjusted with quick-acting positive mechanism. Heavy heat treated aluminum back plates have durable gray hammerloid finish. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5″ Hg (68″ w.c.). Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 616KD Differential Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 616KD .
Series 616KD Differential Pressure Transmitter The One-Touch® Differential Pressure Transmitters are cost-effective, compact transmitters that reduce up front costs as well as expenses over the life of the product. These instruments not only alleviate cumbersome turn pots typically found in most transmitters, but eliminate entirely the need to span the instrument during calibration. With a single digital push button, both ZERO AND SPAN are calibrated properly, nothing else is required. No additional reference pressure sources and separate calibration devices are necessary; no need to remove from service and send to a lab. All that is required of the installer or user is to let the unit sit at zero reference pressure, then push a button. That is it! The transmitter is now ready for operation. Time savings are enormous over the life of the product compared to traditional transmitters which require time to annually remove the product from service plus the additional time to actually perform a complete full-span calibration. Mounting is simple with integral mounting holes on the 616KD that are inherent to the molded housing. The 616KD has the expanded capability to be mounted on a 35 mm DIN rail either via its side or back integral DIN rail clips. The Series 616KD has easy-to-wire open screw terminals at the top of the housing. An optional protective cap snaps directly to housing to cover terminals. The One-Touch® family of Differential Pressure Transmitters are ideal for building automation applications such as air handlers, duct pressure, variable air volume and filter monitoring. Available models include ranges from 1 in w.c. to 20 in w.c. depending on series. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Model DTG Digital Tire Pressure Gage
Rs 25,000/ Piece
Brand	DWYER USA .
Measuring Range	Model DTG-01 .
Model	Model DTG-01 .
Model DTG Digital Tire Pressure Gage The Model DTG-01 Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. With ±1% FS accuracy, the DTG reads psi, bar and kPa with the ease of one-button operation. A protective rubber casing stands up against rough handling and short drops. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 628CR Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 628CR .
Series 628CR Pressure Transmitter Accurate to ±1% of full scale, The Series 628CR Pressure Transmitter, contains a low cost ceramic sensor housed in a compact, rugged, NEMA 4X stainless steel body. Ideal for the budget conscious OEM’s that require high levels of performance, reliability and stability at an unbeatable price. The 628CR housing is small and lightweight for optimum compatibility with OEM systems. The design allows for a variety of pressure ranges from 30 to 500 psi and optional electrical connections allowing you to select the right transmitter for your application. Product Applications : Pump Monitoring,Compressors,Irrigation Equipment,HVAC,Pneumatic Systems Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 626 & 628 Industrial Pressure Transmitter
Rs 9,500/ Piece
Brand	DWYER USA .
Model	Series 626 & 628 .
Series 626 & 628 Industrial Pressure Transmitter The Series 626 Pressure Transmitters possess a highly precise 0.25% full scale accuracy piezo-resistive sensor contained in a compact, rugged, NEMA 4X stainless steel general purpose housing or cast aluminum conduit housing. The Dwyer Series 628 Pressure Transmitters are ideal for OEM’s with 1% full scale accuracy sensors. The transmitter is also available in the general purpose stainless steel housing and the cast aluminum conduit housing. The corrosion resistant 316L stainless steel wetted parts allow the Series 626 and 628 transmitters to measure the pressure in a multitude of processes from hydraulic oils to chemicals. The Series 626 and 628 are available in absolute and pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application. Product Applications : CompressorsPumping Systems,Irrigation System Pressure Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 673 Pressure Transmitter
Rs 12,500 / Piece
Brand	DWYER USA .
Model	Series 673 .
Series 673 Pressure Transmitter The low cost Series 673 Pressure Transmitter is a fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC equipment, industrial engines and compressor control. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Magnehelic Gauge SS Plate Front Cover
Rs 350 / Piece
Brand	Integerated Engineers India .
Material	Steel .
Connection	New .
Magnehelic Gauge SS Plate Front Cover We are here to offer Magnehelic Gauge SS Plate Front Cover. It is designed to calibrate a broad spectrum of instruments from moving coil meters to process control systems and retain its precision over long periods in wide environmental conditions. These are customized as per as needs of clients. Specifications: Metal of construction S.S. 304 Dial size: 4″ Ranges: mm/wc,In/wc, Pascal Enclosure type: consul type & wall mounting Front panel: zero calibration gas selector switch optional Available in different specifications ranging from: 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , And 0- 60 pA, 0-250 pA. Uses: Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series TPT Industrial Pressure Transmitter

Brand	DWYER USA .
Model	Series TPT .
Series TPT Industrial Pressure Transmitter The Series TPT Pressure Transmitter is the ideal choice for all types of industrial pressure applications. Machined from a solid piece of 17-4PH SS, the TPT provides a leak proof, all metal system without O-rings, welds, or organics exposed to the pressure media. Its design allows for stable operation when subject to shock and vibration. Utilizing piezoresistive technology with digital compensation and temperature correction, the TPT gives high accuracy and stability under harsh environmental conditions. Available in ratiometric and 4 to 20 mA outputs. Product Applications : Process automation and control, Test and measurement equipment Etc. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 682 Industrial Pressure Transmitter

Brand	DWYER USA .
Model	Series 682 .
Series 682 Industrial Pressure Transmitter The Series 682 Industrial Pressure Transmitter is designed to withstand environmental effects such as shock, vibration, temperature, and EMIRFI. The electronics and capacitive sensor are packaged in a welded stainless steel housing and meets NEMA 4 (IP65) protection ratings. The transmitter features external zero and span adjustments and reverse polarity protection. The Series 682 delivers high performance in tough applications such as off road equipment, hydraulic systems, compressor control, industrial engines, or industrial refrigeration. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 672 Low Pressure Transducer

Application	Panel Meter, PLC, Switches, Pumps .
Series 672 Low Pressure Transducer The Series 672 Low Pressure Transducer is a perfect solution to any application where a very accurate low pressure transducer is necessary. Using variable capacitance technology, the Series 672 is designed to measure pressures as low as 10″ w.c. up to 400″ w.c., very low ranges for a single connection pressure transducer. The 672 also features a 0.25% F.S. accuracy. Use the Series 672 in liquid level, flood warning, waste water, clean room, and open channel flow applications. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 634ES Adjustable Range Pressure Transmitter

Brand	DWYER USA .
Model	Series 634ES .
Series 634ES Adjustable Range Pressure Transmitter Series 634ES Transmitters sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal. Positive pressure can be measured within an accuracy of ±0.5% of span. The Series 634ES uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge. Convenient 2-wire operation simplifies installation. Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish. Enclosure is designed to meet NEMA 4X requirements. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series 681 Sanitary Pressure Transmitter

Brand	DWYER USA .
Model	Series 681 .
Series 681 Sanitary Pressure Transmitter The Series 681 Sanitary Pressure Transmitter is designed to meet 3A standards for applications in food, dairy, beverage and pharmaceutical processing, liquid level control, and sanitary pipelines. The unit is fully sealed to withstand high pressure wash-down in Clean-in-Place (CIP) and Sterilize-in-Place (SIP) installations. The Series 681 is designed with a unique, no liquid fill diaphragm and a Sanitary Clamp pressure fitting for easy installation with negligible clamping effect. A conduit fitting, shielded cable with vent tube and sealed screws for zero and span adjustment combine to make the Series 681 completely watertight. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series BYDS Bypass Damper Switch

Brand	DWYER USA .
Model	BYDS .
Series BYDS Bypass Damper Switch The Series BYDS Bypass Damper Switch is designed to control motorized bypass dampers. As individual zone dampers open and close, the system static pressure will rise and fall. In order to maintain proper airflow and static pressure through the HVAC system, a bypass system incorporating a floating type motorized damper and a static pressure control should be incorporated. A typical onoff pressure switch cannot operate in this application due to the high cycle rate that would result, eventually causing contact burnout. The BYDS static pressure control is equipped with a solid-state switching and timing circuit to enhance operation and improve long-term reliability in this demanding application. CONTROL OPERATION The BYDS Bypass Damper Switch is designed for use with a three wire floating point damper actuator used to control the static pressure on zone control systems requiring motorized bypass dampers. A bypass damper, bypasses air from the discharge air side of the HVAC unit back in the return air side. The air flow is modulated in order to maintain a constant static pressure in the system as individual zone dampers open and close. The static pressure control is equipped with solid-state switching which dramatically increases the life of the control. On an increase in static pressure the BYDS will send 24 volts out and start the actuator to drive open. When the static pressure reaches set-point the actuator will stop. After a ten second delay the actuator will start to drive the damper closed if there has not been an increase in static pressure. A green LED indicates when the damper is in the open position or being driven open. A 24 VAC transformer is required to power the BYDS control and damper actuator. The unit includes tubing and two static pressure probes Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

TRI2 Tridicator Gage
Rs 25,000/ Piece
Brand	DWYER USA .
Model	Series TRI2 .
TRI2 Tridicator Gage The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGP Stainless Steel Low Pressure Schaeffer Gage
Rs 10,780/ Piece
Brand	DWYER USA .
Model	Series SGP .
SGP Stainless Steel Low Pressure Schaeffer Gage The Series SGP Gages have dual Englishmetric scales with Â±1.6% full scale accuracy. The Series SGP gages are designed with 304 SS housings, a 316L SS chamber and a 316 SS diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149Â°F (65Â°C) and process temperatures up to 248Â°F (120Â°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Applications : Chemical,Fertilizer,PowerPharmaceutical,Petrochemical Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGO Stainless Steel Schaeffer Gage
Rs 12,500/ Piece
Brand	DWYER USA .
Model	Series SGO .
SGO Stainless Steel Schaeffer Gage The Series SGO Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGO gages are designed with 304 SS housing, a 316L SS chamber and PTFE coated diaphragm for excellent chemical compatibility. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 248°F (120°C). Ranges are available from full vacuum, compound to 300 psi. Product Applications: : Chemical,Refinery,Fertilizer Petrochemical, Power Pharmaceutical Pulp and PaperCement. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

SGF Stainless Steel Low Pressure Gage
Rs 4,000 / Piece
Brand	DWYER USA .
Model	Series SGX SGF .
SGF Stainless Steel Low Pressure Gage The Series SGXSGF Gages have dual Englishmetric scales with ±1.6% full scale accuracy. The Series SGXSGF gages are designed with 304 SS housings and brass or 316 SS wetted parts. Units can withstand ambient temperatures up to 149°F (65°C) and process temperatures up to 212°F (100°C). Ranges of vacuum, compound and pressures to 235″ w.c. are available. Included on the dial is a convenient zero adjustment screw which allows the user to easily re-zero the needle. Product Applications : Pneumatic,Draft Measurement,Filter Monitoring,Liquid Level Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series WDG Weatherproof Digital Pressure Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Measuring Range(mm)	4-digit backlit display .
Model No.	Series WDG .
Series WDG Weatherproof Digital Pressure Gage The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPGA & DPGW Digital Pressure Gauge
Rs 12,500/ Piece
Brand	DWYER USA .
Measuring Range(mm)	0-50 MM WC .
Model No.	Series DPGA .
Series DPGA & DPGW Digital Pressure Gauge The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases. The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of air and compatible liquids and gases. Product Applications : Ideal for checking process pressure at system startup Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPGAB Digital Pressure Gauge
Rs 28,562/ Piece
Brand	DWYER USA .
Measuring Range(mm)	Range 0 to 200 psig .
Model No.	Series DPGWBDPGAB .
Series DPGAB Digital Pressure Gauge The Series DPGWB DPGAB pressure gages offer 0.5% full scale accuracy in a rugged, easy-to-use unit at prices comparable to mechanical gages. The DPGWB stainless steel wetted material makes it suitable for a wide variety of liquids or gases. The gages feature user-selectable units of measure allowing one gage to be used for a variety of pressure scales. The DPGWBDPGAB come with a protective rubber boot to protect against short drops and rough handling. Product Applications : Ideal for checking line pressures at system startup Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DPG Digital Pressure Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	Series DPG .
Series DPG Digital Pressure Gage Replace your outdated analog gages with the new Series DPG Digital Pressure Gage. The Series DPG has a high ±0.25% or ±0.5% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, tare or auto zero and conversion of the pressure units. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DCGII Digital Calibration Pressure Gage
Rs 25,000 / Piece
DWYER USA	Series DCGII .
Series DCGII Digital Calibration Pressure Gage The Series DCGII Digital Calibration Pressure Gage offers a complete pressure gage with calibration capabilities. With a precise 0.05% full scale accuracy and large 5 digit resolution, this gage can be used in critical industrial applications where precision is most important. This versatile gage only requires one 9V battery or power adapter and can operate up to 5,000 working hours. The Series DCGII 0.05% Digital Pressure Gage can display percent of range, pressure swings or alarm set points. This pressure gage comes complete with eleven selectable pressure units, backlight and zeroing capability. Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Model HTG Handheld Digital Tire Pressure Gage
Rs 35,000 / Piece
Brand	DWYER USA .
Model	Model HTG-01 .
Model HTG Handheld Digital Tire Pressure Gage The Model HTG-01 Handheld Digital Tire Gage reads tire pressure quickly and accurately to help improve fuel economy and increase tire life. Its lightweight, handheld design makes it portable and user friendly with its one button operation. A backlit 14″ LCD display and illuminated tip ensures easy visibility in low light. The Series HTG also displays three different units of psi, bar and kPa with the push of a button. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series DSGT Digital Indicating Transmitter
Rs 35,000 / Piece
Brand	DWYER USA .
Model	Series DSGT .
Series DSGT Digital Indicating Transmitter Series DSGT Digital Indicating Transmitter is a versatile multi-function process gage that features an excellent 0.25% full scale accuracy. This all-in-one digital gage package is designed to reduce installation costs, instrument cost, and save space where an application requires a gage, transmitter, and switches. The Series DSGT gage comes standards with a loop-powered 4-20 mA transmitter output and is offered with one or two optional SPDT switches. The Series DSGT gage is housed in a durable fiberglass reinforced thermoplastic case that is designed to meet NEMA 4 (IP65) requirements. The gage features a menu-driven display for easy customization. User selectable features include 12 engineering units of measure, password protected calibration and disable functions, as well as an adjustable bar graph and update dampening rates. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

250-AF Inclined Manometer Air Filter Gage

Brand	DWYER USA .
Connection	New .
Condition	New .
250-AF Inclined Manometer Air Filter Gage Dwyer® Durablock® Series 250-AF Gages are precision machined 1″ thick solid acrylic plastic, virtually unbreakable and free of distortion. The fluid bore is precision drilled to ±.0002″ to assure life long accuracy. A glass spirit level is built into the body and encapsulated to prevent damage or tampering. The scale is mirror polished chrome plated brass to assure parallax free reading by alignment of the meniscus with its reflection. Safety traps are incorporated in the body to prevent loss of fluid due to pressure surges. Red and green signal flags indicate clearly when a filter change is necessary. Gages are suitable for use in ambient temperatures of -20 to 150°F. Connection fittings are positively sealed by “O” rings but easily removed for zeroing or addition of fluid. Furnished complete with instructions. Economy Models 451-AF and 452-AF are similar to 250 Series except they are not equipped with over pressure traps. Two A-324 14″ compression fittings are included with each Gage. Bodies are of 58″ thick acrylic and scales are mirror polished, epoxy coated aluminum. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

300 Durablock Solid Plastic Stationary Gage
Rs 9,000/ Piece
Brand	dwyer usa .
300 Durablock Solid Plastic Stationary Gage Dwyer® solid plastic stationary gages – or draft gages – are offered in inclined and vertical (well-type) styles for highly accurate laboratory or general industrial service, for measurement of low range gas and air pressures, positive, negative or differential. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer’s years of experience in the fabrications of acrylic instruments. Product Applications : Field gage calibration, permanent installation, burst disc testing, torque data logging, pressure regulator testing and hydrostatic leak testing. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series UGI Utility Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	DWYER USA .
Series UGI Utility Gage 1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series UGJ Utility Gage
Rs 25,000 / Piece
Brand	DWYER USA .
Model	DWYER USA .
Series UGJ Utility Gage The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Series SG5 Contractor Gage
Rs 4,000 / Piece
Brand	DWYER USA .
Model	Series SG5 .
Series SG5 Contractor Gage The Series SG5 Contractor Gages are ideally manufactured for contractors because of their large dial and compact design. Since the gages are lightweight and slim, they are easy to transport. The large 4.5″ scale makes them simple to read. The Series SG5 gages possess psi scales with 1% full-scale accuracy. The gages are made with a stainless steel housing and brass wetted parts. Units can withstand temperatures of -4 to 140°F (-20 to 60°C). These qualities make the SG5 series perfect for contractors and industrial applications. A wide offering of ranges are available from full vacuum to 300 psi. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: Delhi

Elementor #1829

Dwyer Digital Differential Pressure Gauge
Rs 18,500 / Piece
Brand	DWYER USA .
Dwyer Digital Differential Pressure Gauge Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Specifications: Measuring Range: Medium-pressure Gauge Accuracy: 0.5 Application: Industrial Additional Information: Pay Mode Terms: T/T (Bank Transfer)

Elementor #1717

Model 480 Vaneometer Swing Vane Anemometer
Rs 7,500 / Piece
Model 480 Vaneometer Swing Vane Anemometer The 480 Vaneometer™ Swing Vane Anemometer is a durable low-priced instrument specifically designed to simplify the measurement of low air velocities from 25 to 400 feet per minute. OSHA, EPA and other safety ventilation requirements for spray booths and at fume, smoke and dust exhaust hoods can now be quickly checked, even by untrained personnel. Its small size and light weight – only four ounces make it ideal to carry from one work station to another. A versatile steel mounting bracket for continuous monitoring is also included. The Vaneometer™ Swing Vane Anemometer is accurate to ±5% of full scale to 100 FPM and ±10% from 100 FPM to top of scale. It has a spirit level to ensure accurate readings and the large scales are easy to read and visible from both sides. The housing is molded from tough ABS plastic and easy to clean with soap and water. The polyester vane can be cleaned with lacquer thinner. A spare vane is provided. Use a Vaneometer™ Swing Vane Anemometer to measure velocity of air flow into laboratory fume hoods and at paint spray booths to determine when to change filters. Or wherever needed to meet OSHA standards of ventilation for smoke, dust or fume removal. Additional Information: Pay Mode Terms: T/T (Bank Transfer) Port of Dispatch: delhi Production Capacity: 8368801023

Series 477 Handheld Digital Manometer

Measuring Range	0 to 20 inch WC
Connection	3/16 inch ID Tubing
Brand	Dwyer
Power Supply	9 V battery

Series 477 Handheld Digital Manometer Series 477 Handheld Digital Manometers are packed with features you need to make low pressure measurement and recording faster, easier and more accurate than ever. First, you can instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. Next, a non-volatile memory function enables storage of up to 40 readings – perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct. The Series 477 is FM approved intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4. When working in poorly lighted areas, just switch on the handy backlight feature. It automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. We even included an audible alarm to warn you of overpressure plus a visual alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.

Product Applications : Field calibration.,Clean room checks,Air velocity monitoring with Dwyer Pitot tube. etc.

SPECIFICATIONS Service: Air and non-combustible compatible gases. Accuracy: ±0.10% of full-scale from 60 to 78°F (15.6 to 25.6°C); ±1% of full scalefrom 32 to 60 and 78 to 104°F (0-15.6 and 25.6-40°C). Pressure Hysteresis: ±0.1% of full-scale. Pressure Limits: See chart. Temperature Limits: 32 to 140°F (0 to 60°C). Storage Temperature Limits: -4 to 176°F (-20 to 80°C). Display: 0.42?? (10.6 mm) 4 digit LCD. Resolution: See chart. Power Requirements: 9 V alkaline battery, installed non-functional, userreplaceable. Weight: 10.2 oz. (289 g). Process Connections: Two barbed connections for use with 1/8?? (3.18 mm) or3/16?? (4.76 mm) ID tubing for 477A-1, 477A-2, 477A-3, 477A-4 and 477A-5 only.Two compression fittings for use with 1/8?? (3.18 mm) ID x 1/4?? (6.35 mm) ODtubing for 477A-6 and 477A-7 only.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

475 Mark III Handheld Digital Manometer

Brand	DWYER USA
Model	475 Mark III

475 Mark III Handheld Digital Manometer The Dwyer® Series 475 Mark III Handheld Digital Manometer is ideal for field calibration, monitoring or trouble shooting HVAC systems, clean rooms or a wide range of other low pressure pneumatic systems. This handy instrument measures positive, negative or differential pressures of air and natural gases in ranges from 1″ w.c. (0.249 kPa) to 150 psid (10.34 bar). The Series 475-FM is approved and is intrinsically safe for hazardous locations, Class 1, Div.1, Group A, B,C, D, T4. Its simple operation and easy to read digital display make it an indispensable test instrument for the plant engineer, industrial hygienist and HVAC technician. When used with a Dwyer® Pitot tube, the Series 475 Mark III can also be used as an air velocity gage. The Series 475-FM Mark III is housed in a durable extruded aluminum case with its solid state circuitry mounted on a tough fiberglass epoxy circuit board. To meet the most demanding applications and to provide stability of instrument reading, the 1″ w.c. range is compensated for position sensitivity through use of a unique dual sensor system. A standard 9 volt battery provides up to 100 hours of operation. Dual push pads on the front panel control on-off, auto zero, and pressure unit selection. No setup or leveling. The large 0.42″ LCD display is easy to read, minimizing data collection errors. Units include a “low battery” indicator. The pressure sensor used is a highly stable silicon piezoresistive device. Standard connections are dual sized for 18″ or 316″ I.D. vinyl or rubber tubing. Complete instructions are conveniently printed on rear of housing

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

HM35 Precision Digital Pressure Manometer

Brand	DWYER USA
Model	HM35
Application	Industrial, Laboratory

HM35 Precision Digital Pressure Manometer The High Precision Series HM35 Digital Manometer is designed to reliably measure and log pressure measurements for critical applications. This family of manometer can measure absolute pressure, differential pressure or gauge pressure with up to 0.05% accuracy. The data logging function can store up to 10,742 readings and transmit the readings to a PC through an IR serial port. The large display can graphically display trends in the data as well as peaks and valleys. The series HM35 comes standard with a calibration certificate so that the instrument can be used as a secondary calibration standard when testing other pressure instrumentation. This manometer is ideal for laboratories, calibration facilities, and other critical pressure applications.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

HM28 Handheld Digital Manometer

Brand	DWYER USA
Model	HM28
Application	Industrial, Laboratory

HM28 Handheld Digital Manometer The Series HM28 Digital Hand-Held Manometer is a precision instrument designed to measure a wide range of pressures to a very high accuracy. The unit incorporates a variety of features in an easy to use format that makes it useful in a wide variety of applications. Features include: measurement in all common pressure ranges, display resolution to 0.001, differential or relative measurement, two line liquid crystal display, and adjustable auto power off to conserve battery. We are so proud of the accuracy of the HM28 that we provide a certificate of calibration with the unit at no additional cost. Depending on your application, the HM28 can be used as a secondary calibration standard for your other pressure instrumentation.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

490 Wet Handheld Digital Manometer

Brand	DWYER USA
Model	490
Application	Industrial, Laboratory

490 Wet Handheld Digital Manometer Series 490 Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings for later recall and a backlight provides auxiliary lighting for hard-to-see locations. Standard are a hold feature and both visual and audible overpressure alarms. A new feature added to the Series 490 is a field adjustable damping. This allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications. A 9V alkaline battery is included that provides up to 100 hours of operation.

Product Applications : Balance hydronic heating or cooling water loops,Check pump or chiller performance,Determine pressure head loss from valves and pipe reduction.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1223 Flex-Tube U-Tube Manometer

Brand	DWYER USA
Model	1223

1223 Flex-Tube U-Tube Manometer These inexpensive manometers measure positive, negative and differential pressures. Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple “U” Tube with the durability of tough, long-lasting plastic construction. Columns are of .375″ O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility. You can choose from numerous models and features including over-pressure safety traps, in full scale ranges from 8″ to 36″ of water or mercury. All are suitable for total pressures to 100 psi – for determining velocity and static pressures, leakage, fan and blower efficiency, filter resistance, and gas pressures. Ideal wherever a portable, direct reading manometer is needed. Standard ranges and markings as shown, or special ranges, colors, logos and brand names for OEM quantity orders are available.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1212 Gas Pressure Kit Slack Tube Manometer

Brand	DWYER USA
Model	1212

1212 Gas Pressure Kit Slack Tube Manometer 1211 Handy Roll-Up Manometer with Laboratory Accuracy Dwyer® Slack Tube® Manometers are as accurate as the finest laboratory “U” gages – yet they are made to roll up compactly for easy carrying and to withstand rough usage. Simply unroll the Dwyer® Slack Tube® Manometer and set up to read static pressure, vacuum, or differential pressure. Magnetic clips hold it firmly to any steel surface or hang it on a nail. Turn connectors one revolution to open. When the pressure is imposed, add the number of inches one column travels up to the number of inches the other column travels down. When reading is completed turn connectors to seal columns, roll up manometer into compact coil and tuck it away in its plastic case or a tool box. No fluid lost. No loose caps or inserts to lose. Dwyer® Slack Tube® Manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches. Use them in determining velocity and static pressures, for leakage, fan and blower tests, calibrating control devices, checking gas pressure and many other applications. All models have flexible vinyl-plastic columns and flexible spring steel scale calibrated in inches of water using water; and inches of mercury using mercury. Scale is center-mounted between columns to eliminate parallax error and has a full 2″ sliding zero adjustment. All Dwyer® Slack Tube® Manometers feature exclusive molded nylon tubing connector assemblies with rapid shutoff design in an acrylic plastic top. One turn counter clockwise and the instrument is ready for use. Another turn seals the tubes completely. Molded all-nylon construction makes this assembly corrosion-proof, leak-proof and practically unbreakable. Tubing connectors extend horizontally allowing 360° freedom. Tubes won’t bend or pinch off. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

Brand

DWYER USA

1227 Dual Range Flex-Tube U-Inclined ManometerUse Series

1227 as a regular U-tube manometer to read high-range pressure on the right leg, or as an inclined manometer to read low-range pressure on the bottom leg. Simply incline manometer until fluid levels read zero. No spirit level required. Magnetic clips hold the gage in position on a steel duct surface.

Most versatile and useful low cost manometer we know of. Designed for installation and servicemen. A sturdy, clear plastic manometer, it offers single, direct readings in two ranges: As a U-tube, it reads from 0 to 16″ of water; as an inclined gage, it reads from -.20 to 0 to 2.6″ of water. Model 1227M (Metric) is 0 to 400 mm water column as a U-tube and -5 to 0 to 70 mm water column as an inclined gage. “How-to-use” instructions are printed directly on the scale.
Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Series 1213 Gas Pressure Manometer

Brand	DWYER USA
Model	Series 1213

Series 1213 Gas Pressure Manometer
Provide visual indication of pressure with the Series 1213 Gas Pressure Manometer. Designed for use with natural gas, the manometer can also be used to monitor any compatible gases up to 15 inches of water column. Tap water is used as the sensing media and a magnetic clip provides temporary or permanent mounting. Economically priced and made of durable plastic for years of trouble-free service. Includes three feet of vinyl tubing and 18″ nylon male NPT to barb fitting. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model THI-10 Digital Thermohygrometer

Brand

DWYER USA

Model THI-10 Digital Thermohygrometer The Model THI-10 Digital Thermohygrometer accurately measures relative humidity and ambient temperature. Up to 99 readings can be stored in non-volatile memory allowing the HVAC technician to record the data after returning to the office. This compact thermohygrometer also features user selectable engineering units, MaximumMinimum functions, dew point and wet bulb temperature measurements. The Model THI-10 includes a soft carrying case with a belt loop for easy transportation. Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023

Model ANE-1 Differential Pressure Anemometer

Brand	DWYER USA
Model	Model MW-1
Usage	Industrial, Laboratory

Model MW-1 Pocket Wind Meter Measure wind speed and temperature with the Model MW-1 Pocket Wind Meter. Easily view readings on the four digit 2″ (51 mm) high LCD display with wind speed bar graph. Selectable air velocity ranges include ms, ftmin, kmh, mph, and knots. Ambient temperature recorded in °F or °C. The MW also features automatic shut-off, detailed instruction manual and protective plastic water resistant housing that floats. Accessories include a lanyard.Additional Information:

Pay Mode Terms: T/T (Bank Transfer)
Port of Dispatch: DELHI
Production Capacity: 8368801023