Dwyer Magnehelic Gauge Wholesale Suppliers India

TRI2 Tridicator Gage

Diameter	4-3/4″
Weight	1 lb. 2 oz.
Finished	Baked dark gray enamel
Pressure Rating	15 psi
Thread Pipe	1/8″ NPT
Deep Size	2-3/16″

The Series TRI2 combines the value of an individual pressure gage and thermometer in one instrument. These tridicators simplify installation which reduces time and saves money. The moveable dial with blue pressure markings and red temperature markings make the instrument easy to read. Pressure is indicated in both psi and kPa, while temperature is measured in both Fahrenheit and Celsius. Series TRI2 comes in three different connection options including lower mount, center back mount, and center back mount with extension shank.

Series WDG Weatherproof Digital Pressure Gage

Display Type	4-digit LCD (1-1/4 x 5/8″).
Power	3 V CR123A
Size	2.5″ O.D
Battery Life	2 to 3 years typ.
Housing Material	BDG: ABS plastic; WDG: Fiberglass reinforced PP plastic
Thermal Effect	+-0.04% FS per degC.

The Series WDG Weatherproof Digital Pressure Gage measures gas and liquid pressure with high accuracy at an affordable price. It’s rugged weatherproof design stands up to outdoor and industrial environments. The 4-digit backlit display with four selectable units makes readings easily visible to prevent reading errors. The WDG comes with 304L stainless steel wetted material for a wide range of compatible liquids and gases.

Dwyer Series 2000:2060 Magnehelic Differential Pressure Gage

Accuracy	Plus or minus 2%
Weight	1 lb. 2 oz
Dimension	4-3/4″ dia. x 2-3/16″ deep
Pressure Rating	15 PSI (0,35 bar)
Connections	1/8″ NPT
Ambient Temperature Range	20deg to 140degF

Dwyer Instruments – Series 2000: 2060 Magnehelic Differential Pressure Gage

• Filter Monitoring
• Air Velocity with Dwyer Pitot Tube
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

Select the Magnehelic gage for high accuracy–guaranteed within 2% of full scale–and for the wide choice of models available to suit your needs precisely. Using Dwyer’s simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Specifications
Service: Air and non-combustible, compatible gases (Natural Gas option available).
Wetted Materials: Call us at (888) 886-8185.
Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy: ±2% of full scale throughout range at 70°F (21.1°C).
Pressure Range: 0-60.0″ w.c.
Pressure Limits: -20″ Hg. to 15 psig. (-0.677 bar to 1.034 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
Temperature Limits: 20 to 140°F (-6.67 to 60°C).
Mounting Orientation: Diaphragm in vertical position.
Process Connections: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
Weight: 1 lb 2 oz (510 g).
Standard Accessories: Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapters and three flush mounting adapters with screws.
Below are other pressure ranges available for Series 2000 Differential Pressure Gage:

Model Number	Range Inches of Water	Model Number	Range Inches of Water
2000-00N†••	-.05-0-.2	2015	0-15
2000-00†••	0-.25	2020	0-20
2000-0†•	0-.50	2025	0-25
2001	0-1.0	2030	0-30
2002	0-2.0	2040	0-40
2003	0-3.0	2050	0-50
2004	0-4.0	2060	0-60
2005	0-5.0	2080	0-80
2006	0-6.0	2100	0-100
2008	0-8.0	2150	0-150
2010	0-10
† These ranges calibrated for vertical scale position. • Accuracy +/-3% •• Accuracy +/-4%

Dm-1000 Digi Mag Digital Differential Pressure And Flow Gages

Display Type	4-digit LCD (digits: 0.60H x 0.33W).
Accuracy	+-1% FS including linearity, hysteresis and repeatability; +-2% FS for ranges 1 in w.c. and below.
Weight	1.18 lb (535 g).
Housing Materials	Glass filled plastic.
Long Term Stability	+-1% FS per year.
Power Supply	9-24 VDC.

The DigiMag® SERIES DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span. Product Applications

Filter monitoring
Air velocity or flow
Blower vacuum monitoring
Fan pressure indication
Duct, room or building pressures
Clean room positive pressure indication

Models & Ordering

Model	Description
DM-1102	DigiMag® differential digital pressure gage, range 0-0.25″ w.c.
DM-1103	DigiMag® differential digital pressure gage, range 0-0.5″ w.c.
DM-1104	DigiMag® differential digital pressure gage, range 0-1″ w.c.
DM-1105	DigiMag® differential digital pressure gage, range 0-2″ w.c.
DM-1107	DigiMag® differential digital pressure gage, range 0-5″ w.c.
DM-1108	DigiMag® differential digital pressure gage, range 0-10″ w.c.
DM-1109	DigiMag® differential digital pressure gage, range 0-15″ w.c.
DM-1110	DigiMag® differential digital pressure gage, range 0-25″ w.c.
DM-1111	DigiMag® differential digital pressure gage, range 0-50″ w.c.
DM-1112	DigiMag® differential digital pressure gage, range 0-100″ w.c.
DM-1122	DigiMag® differential digital pressure gage, range 0.25-0-0.25″ w.c.
DM-1123	DigiMag® differential digital pressure gage, range 0.5-0-0.5″ w.c.
DM-1124	DigiMag® differential digital pressure gage, range 1-0-1″ w.c.
DM-1125	DigiMag® differential digital pressure gage, range 2-0-2″ w.c.
DM-1127	DigiMag® differential digital pressure gage, range 5-0-5″ w.c.
DM-1128	DigiMag® differential digital pressure gage, range 10-0-10″ w.c.

Industrial Magnehelic Differential Pressure Gauges

Accuracy	+-2%
Weight	1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size	4″ (101.6 mm) diameter dial face.
Mounting Orientation	Diaphragm in vertical position. Consult factory for other position orientations.
Temperature Limits	20 to 140degF* (-6.67 to 60degC).
Pressure Limits	-20 in hg

We are the leading manufacturer and exporter of a quality tested assortment of Industrial Magnehelic Gauges. Our range is widely used in checking the automatic valves and gas-air ratio controls, further in medical equipment also to monitor blood and respiratory pressures. Besides it is used to measure the fan and blow pressures, liquid levels and pressures in fluidic systems. Operated by a diaphragm our product is low in cost and is available in different specifications ranging from 0-10, 0-25, 0-40, 0-50, 0-100 MM Wc , and 0- 60 pA, 0-250 pA.

Uses:

Used for high accuracy-guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely

Sensocon Magnehelic Gages -50 To 50 MMWC

Weight	1 lb 2 oz 510 g
Media Compatibility	Air and compatible gasses
Warranty	2 year
Accuracy	+/-2%
Pressure Limit	-20″ hg
Process Connection	1/8″

Specification:

Dial size : 4′
Range -50 To 50 MMWC
Range – 0 – 6 MM WC
Range – 0 – 25 MM WC
Range – 0 – 50 MM WC
Range – 0 – 100 MM WC
Range – 0 – 60 PAC

Magnehelic Gauge

Diameter	4-3/4″
Weight	1 lb. 2 oz.
Deep	2-3/16″
Finished	Baked dark gray enamel
Thread Size	1/8″ NPT plugs
Pressure Rating	15 PSI

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client’s end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

Accuracy
High functionality
Long service life

Specifications:

We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge
Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%
Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others
We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas
In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover
These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

Technical Specifications:

Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option
HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)
Size: 4 (101.6 mm) Diameter dial face
Mounting Orientation: Diaphragm in vertical position, Consult factory for
Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
Other position orientations

Applications:

Filter Status
Duct Static Pressure
Clean Room Pressure
Building Pressure
Fan and Blower Pressure
Paint Booths
Dust Collectors
Glove Box Pressure
Bubbler Systems
Cabinet Purging

Dwyer Digital Differential Pressure Gauge

Display Type	4-digit LCD
Shape	Round
Accuracy	2%
Size	2.5″(63mm)
Thread Connection	1/4G
Battery Power	9 V
Dial Material	Aluminum

Monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.

Digital Differential Pressure Gauges

Accuracy	+-1% F.S
Weight	1.18 lb (535 g).
Size	5″ (127 mm) O.D. front face.
Display	4-digit LCD
Temperature Limits	0 to 140 DegreeF (-18 to 60 DegreeC).
Housing Materials	Glass filled plastic

The series A1 Digital Differential Pressure Gage is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges. The Series A1 differential pressure gauges utilize an extremely stable piezo resistive sensing technology to give a standard full scale accuracy of 1%. For applications requiring better accuracy, the A1 is also available with 0.5% accuracy. The A1 pressure gauge also has an optional 4-20 mA output for applications requiring an output signal. The A1 features a bright ½” LED display, which gives the gauge improved readability and precision. The A1 digital differential pressure gauges also feature 5 user selectable engineering units including in. w.c., mm w.c., cm w.c., kPa, and Pa. The Series A1 offers an improved look, and performance compare to mechanical gauges for a similar price.

Maximum Pressure:

4″ w.c. and less = 2 PSI; 5″ w.c. and above = 10 PSI
Media compatibility:
Air and compatible non combustible, non corrosive gasses
Accuracy*:
Axxx0-xx – 1.00%; Axxx1-xx – 0.50%; Axxx2-xx – 0.25%
Temperature Ranges: Compensated and Operating:
-10° to 140°F (-23° to 60°C)
Thermal Effect*:
/- 0.012% FS/°F
Output Signal:
4-20 mA (option)
Loop Resistance:
750 Ω Max (for internally sourced power); 1800 Ω Max
(for externally sourced power of 36 VDC)

Specifications:

Universal 24-240 VAC or VDC
Housing Material:
Glass Filled Nylon
Enclosure Rating:
Designed to meet NEMA 4X face; with optional
cover the entire product is weatherproof

Differential Pressure Piston-Type Gage

Brand	DWYER
Accuracy	+-3-2-3%
Weight	2.5″ = 0.60 lb (0.27 kg)
Size	2.5″ (63 mm) 4.5″ (115 mm).
Material Grade	SS316
Temperature Limits	-40 to 200 DegreeF (-40 to 93 DegreeC).
Pressure Limits	6000 psig

Differential Pressure Piston-Type Gage

Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.
Product Applications
Filter pressure drop
Strainers
Pump performance testing
Heat exchanger pressure drop
<

Series PTGD Differential Pressure Piston-Type Gage

Accuracy	+-3-2-3%
Weight	2.5″ = 0.60 lb (0.27 kg)
Size	2.5″ (63 mm) 4.5″ (115 mm).
Process Connections	1/4″ female NPT end connections standard; 1/4″ female NPT back connections optional.
Mounting Orientation	Mount in any position.
Temperature Limits	-40 to 200 DegreeF (-40 to 93 DegreeC).

The SERIES PTGD Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4″ female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.

Applications:

Filter pressure drop
Strainers
Pump performance testing
Heat exchanger
pressure drop

Photohelic Switch and Gauges

Brand	DWYER
Measuring Range	0-.50″ w.c.
Model Name/Number	Series A3000
Usage/Application	Industrial
Material	Aluminium
Color	Black
Scale Range	4″ (101.6 mm) dial face,5″ (127 mm) O.D. x 8-1/4″ (209.55 mm).

Magnehelic Gauge Sensor

Brand	ETI
Pack Type	Box
Material	SS
Finish	Polished
Size	1-3/4″

Admired as first among the best, we provide clients with the premium quality of Magnehelic Gauge Sensor. The gauge sensor is used for air velocity monitoring applications and is manufactured by using latest technology. By following total quality management, the quality of Magnehelic gauge sensor is never compromised.

Features:

Excellent air velocity monitoring efficiency
Compact design
Easy to operate and maintain

Differential Pressure Gauge Nozzles

Brand	ETI
Usage/Application	Home Gardening
Material	Steel
Size	1/2″-3/4″
Packaging Type	Box

We are offering Differential Pressure Gauge Nozzles to our client.

Features:

Excellent air velocity monitoring efficiency
Compact design
Easy to operate and maintain

Magnehelic Gauge Nozzles

Usage/Application	Home Gardening
Material	Steel
Brand	ETI
Size	1/2″-3/6″
Packaging Type	Box

We are offering Magnehelic Gauge Nozzles to our client.

Features:

Excellent air velocity monitoring efficiency
Compact design
Easy to operate and maintain

Series UGJ Utility Gage

Accuracy	+/- 2% F.S. at 21.1 DegreeC
Usage/Application	Industrial
Brand	DWYER
Weight	1 lb. 2oz (510g)
Pressure	60 Pa
Ambient Temperature	7-60degC
Color	Black
Connectiion	1/8”NPT

The Series UGJ Utility Gages possess dual psi and bar (x100 kPa) scales with 2.5% accuracy. The 2″ UGJ gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi.

Dwyer Make Magnehelic Differential Pressure Gauge

Accuracy	Plus or minus 2%
Diameter	4-3/4″
Weight	1 lb. 2 oz.
Deep	2-3/16″
Connections	1/8″ NPT
Pressure Rating	15 psi

Our specialization lies in offering a commendable range of Dwyer Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors’ end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices.

Features:

Compact size
Accuracy
Easy installation

Application:

Industrial Structure: Spring Pressure Gauge Connection Type: Radial Direction
Function: Local Indication Type Indicating
Pressure Reference: Differential Pressure Gauge

Magnehelic Differential Pressure Gauge

Brand	DWYER
Usage/Application	Industrial
Accuracy	+-2%
Weight	1 lb 2 oz (510 g)
Size	4 (101.6 mm)
Pressure Limits	-20 Hg
HP Option	35 psig

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas. In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover. These have exterior finish with grey color to withstand 168 hour salt spray corrosion test.

Specifications :

Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option:
HP option: 35 psig (2.41 bar), 80 psig (5.52 bar).
Over pressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only.
Temperature Limits: 20 to 140°F.* (-6.67 to 60°C).
Size: 4 (101.6 mm) Diameter dial face.
Mounting Orientation: Diaphragm in vertical position, Consult factory for
Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Other position orientations.

Dwyer Digital Differential Pressure Gauge

Weight	1.18 lb (535 g).
Size	5″ (127 mm) O.D. front face.
Process Connections	1/8″ (3 mm) I.D. tubing.
Current Consumption	5 mA maximum.
Type of Battery	9V
Display	4-digit LCD (Digits: 0.60″ H x 0.33″ W).

Experience of this domain, we provide clients with the premium quality of Dwyer Digital Differential Pressure Gauge. For regulation and monitoring of pressure of different industrial applications, the offered Dwyer digital differential pressure gauge is used. Simple calibration and thermal stability make the pressure gauge highly demanded.

Features:

Simplifies calibration with its digital push button
Four button operation reduces set up time
Easy to use and maintain

Dial Gages

Size	4″ (101.6 mm)
Accuracy	+-2%
Pressure Limit	-20 in hg
Temperature Limit	20 to 140degF
Process Connection	1/8″
Weight	510 g

Backed by years of experience of this domain, we present clients with the premium quality of Dial Gages. Used for measurement of differential pressure, the pressure gauge is manufactured by using latest technology. In order to ensure high standards of quality, the Aerosense differential pressure gauge is procured from trusted vendors.

Features:

Excellent measurement accuracy
Easy to use
Requires less maintenance

Dwyer Air Velocity Sensors

Brand	ETI
Weight G	5-20 gm
Pack Type	Box
Material	SS
Usage	Commercial

As a patron centric organization, we provide clients with the premium quality of Dwyer Air Velocity Sensors. Used for monitoring the air velocity of different industrial applications, the air velocity sensors are manufactured by using latest technology. Compact design, sturdy construction and high functionality, make the Dwyer air velocity sensors highly demanded.

Features:

Ideal for air velocity monitoring applications
Compact design
Easy operations and calibrations

Series UGI Utility Gage

Shape	Round
Accuracy	2.5%
Packaging Type	Box
Battery Included	No
Gauge Connection	1/8NPT
Gauge Dial Size	21.5″(40mm)

1.5″ Dials with Back Connection; Dual PSIBar x100 kPa Scales. The Series UGI Utility Gages possess dual psi and bar (x100 kPa) scales with ±2.5% accuracy. The UGI gages are designed with black steel housings. Wetted parts include a brass socket and phosphor bronze tube. A wide offering of ranges are available from full vacuum to 300 psi. The center back mounting and compact size makes this gage the perfect choice for pneumatic air regulators.

+91-9868958924, 9650264867

E-mail us

India

Category: Dwyer Magnehelic Gauge Wholesale Suppliers India